Pavillion 500-223w: startup problems

Similar Questions

• Desktop Pavilion 500: Disc startup problems

  My computer fails to start, and I have to manually select the startup disk so that it can work. I also backup problems all partitions. After running a check disk hard eroor, I get the code.

  u0f4q8 - 72181 g-qffv61-61vk03

  Is it a hard drive failure? Do I have to replace the hard drive?

  Thank you Joe

  Looks like everything works now. I have reset the bios default and that corrects boot sequence number.  Restore the standard MS and recovery feature was able to fix everything that got a bump upward in the first place. I will try to back up the computer again and see what I get.

  Thank you Joe

• HP 500-223W PC: Firewire card problems

  I bought a hp pravilion 500-223w to replace a hp pravilion 6404 y. The 500-223w has no port for pci1394. I ordered a card that was supposed to be compatible with the Terminal Board of the motherboard. I can't download and edit videos at all. Is someone can you please tell me what firewire card is compatible with this model of hp. (HP Pavilion 500-223w. And also who has bright had the idea of eliminating the firewire port if you do not find a standard firewire card that is compatible.

  Hello

  I don't think you can find this type of connector autour on new computers. The following link shows your machine:

  http://support.HP.com/ID-en/document/c04119419

  It has:

  • Expansion slots:

• iMac troubleshooting ADVANCED startup problem

  Hello. My iMac does not complete the boot process. It chime, then display the Apple logo.

  The progress bar will get about halfway, then disappears from the apple logo. Gray rest screen for about 2 minutes, then the computer shuts off and the process repeats. NOTE: the computer does NOT respond to the "safe" mode (shift key) or (command-R) disk utility commands. What else can I try?

  Start - computer restarts by itself-Yosemite

  Resolve startup problems-

  Resolve startup problems - (2)

  Resolve startup problems - (3)

• message from startup problem: imac photos: er zich een has doing voorgedaan bij het recovering bevoegdheden van (an error occurred in restoring the powers)

  message from startup problem: imac photos: er zich een has doing voorgedaan bij het recovering bevoegdheden van (an error occurred in restoring the powers)

  Do you mean, there is an error message about problems with access rights? (toegangsrechten?)

  Where your photo library is stored? In your pictures folder, or on an external drive?

  You share the photo library with another user?

• Desktop HP Pavilion 500-223w: upgrading my video card

  I have a desktop HP Pavilion 500-223w with integrated graphics card intel. I want to install a 3d ready geforce graphics card in the pci expansion slot. How can I disable the integrated video card? I went to the bios Setup, but has not seen something on the video card.

  Hello:

  When you add a video card in this model, the integrated graphics card is automatically disabled as it is on most of today's desktop PCs.

  If your PC came with the factory W10, you need to change two other BIOS settings.

  See this guide for what settings change... This applies to every PC comes with Windows 8 or newer installed.

  http://support.HP.com/us-en/document/c03653200/

• New problem z50 - 75 wireless? Startup problem

  Hello

  I had an another hp laptop which had a problems but the know-how could not fix it so they give money and I brought another Hp 4 days but then she had to be exchanged because of defective. Currys and PCWORLD even gave, but the problem kept pass. So I just paid the HP one and brought 3 days LENOVO Z50-75 it y a. the first Hp laptop, I had, had dns clients warnings in Event Viewer when you use wireless. Same thing on the new computer hp laptop. This problem still occurs in the LENOVO one too. These events started in Windows 10 for all laptops hp and lenovo. My computer laptop lenovo came with windows 10 in any case. So either it's a bug that should be fixed by a new update for the network adapter needs to be released. Computer laptop lenovo has Qualcomm Atheros the old hp laptop realtek the new computer hp laptop that was defective was and intel double wireless broadband and the same edition, DNS CLIENT EVENTS 1014 WARNINGS are still happening. This is definetley not my ISP fault because I replaced the router, more they found nothing on a week 2 diagnostics test on my internet. SO I just want to say lenovo that if there is a way you can fix this. Another thing is that after installation WIN10 threshold 2 on Lenovo Z50-75 when starting of the laptop it shows the logo screen once then black lenovo and then black screen again, then it boots. I have also all the latest updates. So if there is a way guys can fix that also. I'll post this in the microsoft forums too if they can help. Thank you

  Hi I managed to solve this problem by disabling the DNS CLIENT service, but always the startup problem also happens when I stop or restart the cirlce logo going arouns the shows as usual then flashes then closed restartsor and the same thing happens in the Welcome screen it flashes (black screen for a second), and goes after UPDATE of TH2

• HP Pavilion 23: startup problems

  Because we bought our computer in October 2014, we had many problems with the start, problems of drivers, startup problems, graphic card problems and more. It was supposed to be fixed once by the bu retailer still, there are questions. The biggest problem is starting:-it freezes, error messages that say lag not found drivers or disk not detected though when checked is. Also, we have done numerous resets hard which are just a quick temporary solution and back problems. We pay every month for a service contract with the retailer, but they mostly just try to run the store for our computer repair you... NOT HAPPY because for the third day, we bought there have been problems and we haven't bought a computer to sit in a workshop constantly, not at the price we paid coupled with the monthly fee for whatr amounts to nothing. Is there something we can do to solve this problem without driving miles and being without a computer that actually, we bought to USE?

  Hello

  Without compromising your contract, I suggest

  SYSINTERNALS which is a suite of tiny applications bit that may help.

  https://TechNet.Microsoft.com/en-us/Sysinternals/default

  Now only 3 or 4 are likely to be beneficial, and some does not at all because they are for servers etc.

  Thus a special interest may be...

  AutoRuns

  LoadOrder

  RamMap (maybe)

  Contig (maybe)

  PageDfrg

  ROOTKITREVEALER

  DiskView (maybe)

  PsInfo (not really)

  psping (not really)

  After trying a few please ask if there is something to be interpreted.

  I suggest you turn off auto update if you can.

• URGENT HELP PLEASE! Windows did an automatic update finished & gave me the Option "restart now or later. I chose Now.A screen from Windows is going down, a startup problem occurred immediately after the installation of updates, this has happened about 9 h

  Windows has finished just do the automatic updates on my Sony Vaio... He said that he should be released on... When it restarted it goes to the ' start windows normally, safe mode, safe mode w/network, safe w/command prompt mode and the last known good configuration "screen... I tried "start windows normally", and last known good configuration, and no matter what I did, it looks like its about to begin, with the 'windows' logo & he says it's the boot process, but then instantly a screen flashes, but too fast for me to read what he says, so I immediately finished fashion splash screen choose again. Whenever I try to get my PC to boot it goes through this again. Exactly... I tried restarting, shutdown PC up to 30 min. waiting & more & again it does the same thing & will NOT start! HELP PLEASE!
  I do not have my current work & News & saved downloads & need help & I timed commitments to people... ASAP PLEASE!
  Thanking you in advance...

  Windows XP logon screen does not appear and the computer continuously restarts
  http://support.Microsoft.com/kb/310396

  Resources to solve startup problems in Windows XP
  http://support.Microsoft.com/kb/308041 TaurArian [MVP] 2005-2010 - Update Services

• Startup problem blue screen that seems to be associated with BHDRVX64

  I have a laptop model Dell Inspiron N5110 running Windows 7 Home Premium 64 - Bit.  I have Norton Security Suite running - seems to be normal.  When I started my pc this morning, I got the dreaded blue screen of death.  A window will appear which indicates that there is a startup problems and offers several options to correct the startup problem.  One option is to run a startup repair program.  I tried and failed, then it has proposed restoring to a previous date program.  It does not work.  He suggested then reload the Windows program by providing more options of Windows rereloading.  I'll try the drive backuo system I created when I got the new computer-, but then, for reasons unknown, my pc suddenly decided to restart all of himself and it started normally.  Happy, happy.  But then a window pops up that says my computer has a device problem that has been identified as "ROOT\LEGACY_BHDRVX64\0000" she added that "BHDRVX64" was absent, does not, or that he needed a driver. Okay now my pc works normally, but I'm afraid to turn my pc off because this problem seems to be associated with start-up. »

  HELP, HELP. Any suggestion would be appreciated. Thank you. Bobbysan 70

  This program is part of the Norton Security software, so I would like to uninstall and reinstall.  For more information, see with Symantec.  Here is a link to the Google search, I did, FWIW.

  http://www.google.com/webhp?sourceid=toolbar-instant&hl=en&ion=1&qscrl=1&rlz=1T4TSNP_enUS464US464#hl=en&sugexp=les%3B&gs_nf=3&cp=8&gs_id=0&xhr=t&q=BHDRVX64&pf=p&tbo=d&qscrl=1&rlz=1T4TSNP_enUS464US464&output=search&sclient=psy-ab&oq=BHDRVX64&gs_l=&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&fp=89c683d2e84ef3a4&bpcl=38625945&biw=768&bih=460&ion=1

  When you got your system back as you, I invite you to buy an external hard drive, and a good backup 3rd party program. You can configure it to automatically do everything in time and frequency of your choice. 1 TB external hard disks around $ 70 these days and a very good FREE backup program corresponds to the Easeus todo backup free of charge that you can download from

  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.

• Instance startup problem

  Hello
  
  We have a CCR 2 node (ud1 UD2) environment, it was resolved to the top for a long time. We were able to start and stop instances and the database without problem.
  
  Suddenly 2 days back NODE1 has failed. Since then, we are not able to start the node NODE1 and getting following error: - (NODE2 is in place and fine tunning)
  
  [oracle@SER1 ~] $ srvctl start instance d SERVER1-i NODE1
  PRCD-1027: Impossible to retrieve the SERVER1 database
  RPRC-1070: could not verify if the ora.server1.db resource is registered
  Cannot communicate with crsd
  
  In addition, while trying to issue the boot command, get following error:
  
  $ sqlplus / as sysdba
  
  SQL > startup;
  ORA-01078: failure in the treatment of system settings
  ORA-01565: error in the identification of file "+ ORADFLT/server1/datafile/spfile.dbf".
  ORA-17503: ksfdopn:2 could not open the file +ORADFLT/server1/datafile/spfile.dbf
  ORA-29701: unable to connect to the Cluster Synchronization Service
  
  It is not the first time that we are launching this command. Please help with this problem...
  
  Thank you!
  
  Published by: 851602 on July 22, 2011 03:47
  
  Published by: 851602 on July 22, 2011 03:50

  Can you also please make sure that all network interfaces are correct.
  Ping the private sector of both nodes of interconnection and make sure that the servers can communicate.

  You should also look at 'How to Troubleshoot Grid Infrastructure startup problems [ID 1050908.1]'

  You said in your 1st post + "suddenly 2 days back NODE1 got failed...". » +
  That happened the node does get deported, did the crash of the instance...?
  Have you looked in the nodes of the log files if there are errors during this time? I don't understand that you can't get any kind of message in the log files to give us an indication of what could be wrong.

  Please look at all the files following logs on both nodes during the period when the 1st omitted node:

  /log//alert.log
  /log//crsd/crsd.log
  /log//cssd/ocssd.log
  /log//ohasd/ohasd.log
  

  Concerning

  Published by: user10506095 on July 25, 2011 12:02

• Pavillion 500 - a60: Windows 10 activation problem

  My hard drive failed completely and was unrecoverable. I replaced the HD and reinstalled Windows 8.1 and it activated successfully. Windows prompted me to upgrade to Windows 10 I tried and after it installed, he refused to activate saying that is not a valid digital license. It gives the 0x803F7001 error code. When I tried to activate by phone, he said that he has already been activated on another device. Then he me connected to a Microsoft agent and he said that the key to Windows OEM installed with the PC is not valid for activate Windows 10 and I had to contact HP for a KEY appropriate to enable activation.

  Since the PC is out of warranty there is practically no way of contacting technical support without pay which I think is wrong in this situation. It is the first time that I'm trying to upgrade to 10 Windows, and I have the product key of Windows 8 BIOS of the machine.

  I can't find any help on how to solve this problem.

  Greg

  I managed to get in touch with someone at Microsoft, which has provided a new key and now I have the problem solved. It would have been nice if if HP provided a way to communicate with them on this particular type of problem.

  Greg

• 500-300na Pavilion: problem with Pavilion 500-300na (mother of Memphis-S) - Dead / no beeps sound and video

  Hello - I hope someone can help me please
  
  I have desktop PC HP Pavilion 500-300na.
  The PC worked very well without problem - I went for a stay of two weeks during which the PC was not in use and power was turned off. I'm back from vacation and the PC does not work now.
  
  When you press the power button, the LED lights up, CPU fan, electric fan and the two spin system fan. There is no video. There is no beep error codes. What is it - actually dead.
  If I hold the button for about 5 to 10 seconds, the fans run down, but the rest spinning CPU fan.
  
  What I've done so far:

  Tried another monitor.
  Tried a different power supply.
  Powered by the motherboard on its own with any other disconnected.
  Taken the Cmos battery on the motherboard for 1 min and replaced it.
  Clean the dust from the fans (they were not so bad as to be honest).
  
  The machine worked with in PCI16 slot video card - I removed this for the test. As I can't get into the Bios, I can't put in the work of the "mother video card." Not sure if it is a problem.
  The unit has a strip of 8 GB of ram DDR3 - I tried this in another location without any changes.
  I have not tested the ram. I have not tested the CPU or deleted one of the fans / heat sinks.
  
  Thanks for any help you can provide
  Chris

  Okay, I think THAT I managed to fix it and understand what the problem was.
  
  I think the problem was double - first of all, before the problem started, Technical Assistance from HP have a BIOS update and download. I think that this update changed the Startup Configuration in the BIOS to "ENABLED" Secure.
  
  Not really a problem. . BUT...
  
  The video card I was running was a riser and secure boot DISABLED neeeded and legacy support ENABLED.
  
  I have reset the BIOS using the jumper (bios password) information – I also did a 'blind' changing information from the bios to switch to the use of the video of the motherboard (bash F10 for 10 seconds at the start, then three arrows down, then two returns... This pass BIOS to "Apply default settings and exit"). I don't know who really helped, but the machine comes up in life.
  
  I put the information here, in which case another experience a similar problem.
  
  Chris

• Flashing question mark in the Macbook Pro Retina early 2015 at startup problem

  I have the 128 GB of Macbook Pro retina early 2015 model. I bought my macbook, the year last January 2015. I am just now having problem with my mac. When I'm trying to boot my laptop it shows the flashing question mark and it does not start after that. For a while it worked, but after the update the laptop is never again.

  After reading all the articles related to this issue and even after trying it the entire process for the departure of mac. I'm not able to start.

  I tried all the normal recovery process in the process of recovery of the internet, but still it does not work for me. When I select the disk utility in the dialog box, the drive does not appear here, so I can't erase and start to reinstall the operating system.

  What should I do now? I was looking for OEM SSD, but it's very expensive. with this prize money of (here in INDIA RS - 50 k) I can get the Macbook Air.

  If please guide me on how to start the mac or what do I do next?

  Thank you.

  Frank Bsu

  We have no way of knowing exactly what you have tried that doesn't work unless you tell us. A flashing question mark boot means that your Mac is unable to locate a startup disk to boot from.

  If you haven't tried... start your Mac holding the key Option. That should launch the boot window manager have been, you can select the startup disk, and then click on restart.

  If this does not help, you will need to take the Mac for the service.

  If a flashing question mark appears when you start your Mac - Apple Support

• HP Designjet 500 42: Old problem of driver update

  Hello

  I have HP Designjet 500 printer 42 in. And I can't update the old drivers. I downloaded new drivers drivers

  Installed new drivers and the printer connected to the computer. Installed printer itself. Driver version but check it shows in 6.08 (preferably printer-> subject) window.

  I deleted all drivers using pnputil.exe d Oem # .inf and printui/s/T2 orders. All the drivers of HP has been removed from

  C:\Windows\System32\DriverStore\FileRepository

  and

  C:\Windows\System32\spool\drivers\x64\3

  Installed new drivers (8.10) and pluged in the printer. Printer has been installed but with drivers 6.08. So I went to the "print management" as an administrator. Pressed on HP Designjet 500 42 by HP printer 'Manage sharing'-> "Advansed"-> "New driver"-> 'Disc' and in C:\Windows\System32\DriverStore\FileRepository I chose "dsgj510.inf_amd64_* *" folder and the dsgj510.inf file here. But could not find "HP Designjet 500 printer 42 in.". Here only:

  HP Designjet 500 42 + HPGL2 card; HP Designjet 500 plus 42; HP Designjet 500ps plus 42; HP Designjet 500PS42 + HPGL2 card; HP Designjet 510 42 inch printer and HP Designjet 510ps 42-inch printer.

  I tried to use HP Designjet 500 42 + HPGL2 card HP Designjet 500 plus 42 drivers. But printer would give an error message and do not print.

  With the help of the 6.08 driver version I can print from some software, but I need to print from AutoCAD. And AutoCAD gives me the error message "no: cannot use this configuration of tracer for one of the following reasons: the driver is not found, cannot find the device or the driver has a problem." No device has been substituted. "And I can't choose the HP designjet 500 printer in AutoCAD.

  It is a shared printer and other computers on the network have 8.10 drivers and can print from AutoCAD. Single computer, the printer is pluged cannot print because it driver 6.08.

  I found the problem.

  On the page under 10 64-bit windows this is only "HP Designjet 500 and 510 HP-GL/2 and HP RTL driver 64 bit" 8.10 drivers. And this driver is not HP Designjet 500 printer 42-inch drivers. But under 64-bit windows 8, here's two pilots. "Driver HP DesignJet 500 PCL3GUI 64-bit" 8.10 drivers and same as above. This file have drivers for HP Designjet 500 printer 42 inches and runs under windows 10.

  If HP support lazy to put all work them drivers under windows 10 for HP Designjet 500 printer.