Pavillion dv6 6b15ed: Driverupdate to fix the black screen at startup windows 10!

Similar Questions

• How to fix the black screen of my hp pavilion g6

  How to fix the black screen of my hp pavilion g6

  Try a hard reset, works sometimes. Disconnect all external devices first.

  battery and power cord 1 / removal

  2 - Press the power button for 30 seconds

  3 reinstall only the power cord for the first start.

  4. turn on

• Given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen to enter Windows. STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Help.

  I just got a refurbished Compaq 7700. It has Windows XP for drives of the refurbished computers.

  I try to boot from the hard drive (HD) and infinite loops, it is never past the initial home screen (black with blue status bar).

  I can't open the safe or the HD mode, it freezes at kmxstart.sys and then restarts again.

  Original title: given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen, to enter Windows.

  I tried to boot from the disk and created Windows appears, then load the files, but then automatically tries to start Windows (without repair option). It then jumps to the BSoD with error code (after advice to verify sufficient disk space, to disable the driver identified, to change video cards, BIOS updates...)

  STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Usbccgp.sys - address F773B15F base at F7737000, DateStamp 480254d 2

  Apparently, this driver is a printer driver? I don't have a printer, but do not know how to disable it without access to windows.

  I got a new Philips 18.5 "monitor, an optical mouse and a keyboard with it.

  My guess is that the screen is the problem, because it was full again when I received and therefore not tested with the system before shipping. Not sure about the mouse and the keyboard.

  I tried a few options in the BIOS screen as well, but no dice.

  Help! Before shipping the brand new...

  I thank you and have a wonderful new year.

  Craig.

  Howdy Daavee and Shekhar,

  I hope that your day is going well.

  It turns out that it was the hard drive, it was defective. The new unit arrived and it works beautifully. Thank you very much for all you help. I wish you a happy new year.

  Craig.

• How to fix the black screen when I turn on laptop

  The power lights, but all I have is a black screen.

  Cannot use the keys F. NO screen... all black!

  Hello

  If you have no splash screen (Dell, Acer, Logo etc.) or instructions at the bottom of the screen to enter the BIOS (F2, delete, etc.) when you start your computer, you have a hardware problem.

  If under warranty, contact the manufacturer. If it is not under warranty, contact a repair shop, local.

  See you soon.

• Pavilion dv6t-7000: the black screen at startup error

  My computer was slow for a few days now and yesterday it froze completely upward if I pressed the power button until it turned off and I tried to start it again to the top. It did the windows on screen for about 15 seconds then the screen went black and all I had, it was a cursor on a black screen. Fan always on, keypad lights, turntable CD upward. I tried a hard reset with battery, I don't have an external monitor to try, I tried reinstalling the RAM, I tried updating the BIOS, I ran the memory and the hard drive test, and nothing has worked so far. Another thing that you have would be appreciated.

  I have a care package which is always good, but I'm in Chile until August. It would still be possible to make a claim and took in charge?

  Hello

  If the system restore failed, so the last option would be the system recovery. Reinstall the OS (operating system)?

  http://support.HP.com/us-en/product/HP-Pavilion-DV6-7000-entertainment-notebook-PC-series/5226230/model/5273697/document/c01867418/

  If the system recovery defective then computer must send to the HP service center.

• Black screen on startup - Windows 7 Professional

  I recently installed Windows 7 Professional on my laptop MSI, 4 GB of RAM, processor Intel (r) Core (TM) 2 Duo CPU, 32-bit operating system, Nvidia GeForce 9600 m GT 512 MB.

  When I turn it on, there is all black screen. I pull the battery (until I discovered F8) and it starts in safe mode with network. Then, I reboot safe mode and windows load correctly. Two days before the blackout, the cursor would freeze too.

  Note I've read related topics, like the one in which it is suggested to disable the graphics drivers, and I recently downloaded new ones from Nvidia, but it started two or three days later, so I doubt it has to do with the graphics drivers.

  Should I try with the system restore or perhaps reinstall Windows?

  Yesterday, I found and installed both updates Optional:

  1 Realtek driver update for Realtek PCIe GBE Family Controller

  2 update for Windows 7 (KB976422)

  In any case, this morning, the windows loading straight, so with this optional support, the problem could be solved. I hope that nothing will change in the future, however.

• black screen on startup, windows starts, always black, but screen resets of sleep/resume

  I assume that it is a map graphic/display similar problem that many have had, but I have a dv2626tx which has an intermittent starting problem - completely black screen, no backlight, no post BIOS, no blinking cursor, but him are lit and windows7 starts, he plays the welcome chime that login screen is in place , but its still black. The strange thing is, if I close the lid and sleep it is at that moment, then open it again, it wakes up with the screen, but at a resolution of 1024 x 768 and can not be reset to res (1280 x 800) native only other resolutions are available, brightness cannot be adjusted, cannot add a custom in Nvidia Control Panel tried everything. Device Manager no longer mentions a monitor at all. Tried new graphics drivers, still no good. The fact that I can't see even the bios after when it starts (I tried a bright light on the screen, nothing visible) suggests, it must be material, but then why the display works after I have close the lid and open it again?

  Hello

  modernape wrote:

  If I connect an external monitor to the VGA everything displays properly, the bios post display, screen for connection etc all very well.

  This means that the embedded video is fine.  Access the manufacturer's Web site and download the driver, but do not install it right away.  From the Control Panel, remove the video driver. Reboot the laptop. Now, install the driver that you downloaded.

  Please post your results here.

  Best regards
  ERICO

• Error, your computer could not reboot after a unexpected, stuck on the black screen

  Original title: Vista startup repair freezes after that give the message "your computer could not restart" and he said that it is looking for problems. I use the original windows disc

  We had a power failure and the computer showed only a black screen.  When I rebooted it, she ran correct problems and they went to green the black screen with scrolling icon on the bottom, which freezes after 30 seconds or more.  I put in the original disc of Vista and ran the fix repairs.  He said it is looking for the most likely, but freezes with blue tab, stopping in the middle of the page.  any thoughts?

  Hello

  You get an error message or code?

  Method 1:

  First of all I suggest you to disconnect all devices external one except keyboard and mouse and try to start your computer and check.

  Method 2:

  Step 1:

  I also suggest you try to start the computer in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you're able to boot in safe mode, you can perform the system restore to the date when the computer was working fine and check.

  Step 2:

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Access the link below for more information on the Startup Repair:

  Startup Repair: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode-1

  Hope this helps and keep us informed if you need help.

• FIX MY BLACK SCREEN.

  I NEED TO FIX MY BLACK ON MY HP LAP TOP SCREEN TURNS ON AND OFF BY ITS SELF, I PUT THE DISC THAT CAME WITH IT AND IT CAME AND I WENT TO THE RECOVERY AND CLICK RESTART AND NOW BACK TO THE BLACK SCREEN. MAN, I NEED HELP!

  I NEED TO FIX MY BLACK ON MY HP LAP TOP SCREEN TURNS ON AND OFF BY ITS SELF, I PUT THE DISC THAT CAME WITH IT AND IT CAME AND I WENT TO THE RECOVERY AND CLICK RESTART AND NOW BACK TO THE BLACK SCREEN. MAN, I NEED HELP!

  Hey JAMMER11

  You may have a hardware problem

  If the process of hp recovery disk does not work in your hp computer hp laptop touch

  It's their recovery process not microsofts

  http://welcome.HP.com/country/us/en/contact_us.html

  and here is a link to the hp support forums

  http://h30434.www3.HP.com/

  Walter, the time zone traveller

• Windows 7 so that watching an internet blocks on a blue screen and runs or done a thing of memory then try to reboot from the black screen BACK.

  Windows 7 then look at an internet (with explorer) hangs on a blue screen and runs or exports a thing of memory then try to reboot from the black screen BACK. Once it blocks he continues to do it regularly. I rebooted then F8 and run the memory verification, and it seems to work for awhile and I have extended the temporary internet memory to 1000 k.  Can before if necessary mini discharge can not see myself. Any help would be great.

  Hi Rudi,.

  you get this crash:

  Bug Check 0x1E: KMODE_EXCEPTION_NOT_HANDLED - This indicates that a kernel-mode program generated an exception which did not catch the error handler.

  Arguments:
  Arg1: ffffffffc0000005, unhandled exception code

  ExceptionCode: c0000005 Access violation =

  the driver, resulting from this is the driver of Norton/Symantec SYMTDI. SYS.

  Image path: \SystemRoot\System32\Drivers\N360x64\0308000.029\SYMTDI. SYS
  Image name: SYMTDI. SYS
  Timestamp: Thu Jul 07 02:28:48 2009

  So put day/remove Norton/Symantec to fix.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows 10 boots and stuck on the black screen with high CPU

  Hello

  I have a MBP 15 "mid 2015 16G with AMD R9 M370X i7.

  I've been running bootcamp with Windows 10 installation for about a month now without any problems.  However, yesterday 10 Windows started and has been blocked in a black screen (before any screen logo or connection win) with the CPU works hard and hot.

  1. I tried to restart some time hold button / stop and start with the option key, key and then selecting the windows bootcamp partition but it drove the same black screen with CPU hot work in the background.

  2. I can always start OSX fine during this period.

  3. I tried to leave in the black screen for a good 10 minutes, but it does not change and the MBP gets really hot.

  4. I tried clearing NVRAM with Boot option + command + P + R

  5 I can't in Windows 10 safe mode using F8 or FN + F8 after you select windows to boot manager (starting with the down option).  Am I missing something here?

  I don't have a copy of Installer windows 10 with me right now unless someone can tell me how to create one under OSX.

  I searched on the internet forum and apple, but have not found a solution that works for me.  Many speak of win10 black screen with cursor showing, but my question is just a black screen with no cursor.

  Someone at - it other ideas besides reinstall Windows 10?

  You have a black screen with or without power adapter, both? If 10 Windows does not start correctly three times, it should bring up the recovery console. Windows automatic updates are enabled? You have created/activated Windows system restore points?

• Hi, I wanted to know if you can fix the apple screen clock. the clock works perfectly, but the glass broke and how mach

  Hi, I wanted to know if you can fix the apple screen clock. the clock works perfectly, but the glass broke and how much

  Hi Maxi

  Costs vary depending on your location and the model Apple Watch.

  Contact Apple support to establish your repair options, cost and likely delays:

  http://www.Apple.com/br/support/watch/contact/

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• HP envy: stuck on the black screen

  Hello, so my Hp Envy is stuck on a black screen. It's a screen lit, but it does not load windows. I tried a hard reboot, nothing. I've updated the BIOS and it seemed that nothing was happening then loaded windows. My antivirus has been turned off and need to restart the computer now its stuck on the black screen turned on again. Help, please!

  Hi @Jaxibrey,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked into your problem on your HP ENVY laptop and having starting problems.  Try to make a hard reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a link to put the laptop in Safe Mode. Then you can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop. You may need to consider a few days before that the issue that has happened.

  Here is a link to computer does not start for Windows.

  Plug the adapter directly into a different wall socket. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.

  Please let me know how it goes.

  By clicking on the Thumbs Up below, you can say thank you! .

  Thank you.

• When I was playing the game and my 3D PC show the black screen and the sound of noise.

  Hi Admin,
  When I was playing the game and my 3D PC show the black screen and the sound of noise. And then I can't move anything and I can restart only. What is this problem? I don't know why? Please help me what should I do.
  My PC specs are as follows

  Aspire M5800 (Q84MR375) Genuine Windows Vista® Home Premium, 64-bit, Intel Core 2 Quad processor Q8400 (2.66 GHz, 4 MB L2 Cache, bus front at 1333 MHz), 3 GB Ram, 750 GB S - ATA HDD, DVD SuperMulti Double Layer drive, Nvidia GeForce GT220 graphics (1 GB dedicated RAM) card, Wireless LAN, keyboard and wireless mouse with LCD 23 '' monitor.

  phoechan,
  More than likely if this started after you upgrade to Windows7 then you might have to update your hardware drivers.  Go to the websites of the manufacturers of hardware for your PC and get all the latest drivers for Windows 7 (video, sound, chipset, etc...).  If they don't have Windows 7 drivers you may have questions until they create them.  You can also try to boot your PC and also right click on the game .exe file and change the compatibility mode to Vista or XP.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.