PC Compaq laptop Presario R3000 (AMD) supports WPA2-PSK?

Similar Questions

• ISE2.0 supports WPA2-PSK?

  Dear Sir.

  MS AD Server <-->ISE2.0 <--->CT5508 <-->CAP3702i

  I have an ad group: StaffComputer and a SSID: comments

  Can I configure WPA2-PSK in the ISE2.0 for SSID: comments and exclude the StaffComputer?

  In other words, the staff computers cannot access network by the SSID: comments.

  Thank you very much.

  No, since the WPA2-PSK is only based on a key shared beforehand between the client and the WLC, EHT is not involved at all and cannot control what anyone.

• Compaq laptop Presario 2200 Window XP Home Edition

  Compaq Presario 2200 computer laptop XP Windows Home Edition - continuous reboot problem - need to restore with service pack disk

  Error message on blue screen

  "" "STOP: 0 X 00000024 (0 X 00190203, 0 X 85791008, OXC0000102, OX00000000).

  Can someone send me restoration disk?

  No one will send you a restore disk... but the good news is that you need.

  See responses from August 7, 2011 "A User" here--> http://answers.microsoft.com/en-us/windows/forum/windows_xp-update/blue-screen-on-boot-up-stop-0x00000024-0x00190203/40e95bcd-160c-450c-8d5c-cffee739bc90?page=1

  Unfortunately, the link mediafire for xp_rec_con.iso is not good, but you can get it directly from "A. User' here--> https://onedrive.live.com/?id=EC673DF6F8DFEE84! 109 & cid = EC673DF6F8DFEE84

• Computer Compaq laptop presario V5000. CPU keep maxing out and gel

  The CPU keeps fortification and maxing out, so the computer hangs until the CPU falls down. It's all visible from the Task Manager windows @ the performance tuning.  The CPU that keeps repeating up and down cycle zero to the maximum.

  2040637 wrote:

  It says process 44.  What I do next to fix the problem.

  Hello

  It must have a name, just look at the neck of the CPU, which uses "Image Name" CPU?

  

  Kind regards

• How to fix the microphone in Compaq Presario R3000

  Original thread title - how to fix the microphone in Compaq Presario R3000?

  Hello
  I have a laptop Compaq Presario R3000, and I tried to use Skype on it. Problem is that the other end can't hear me. I tried all the suggestions on the site of Skype to try and attach the microphone.  I tried the recorder (click programs, accessories, then entertainment to access), but when I record my voice, nothing, so I guess it has something to do with the microphone. Just to be sure - this model has an internal microphone? What I've read, it seems that it does. I downloaded the updated drivers, so I don't think that's the problem. Any suggestions? I'll try anything now, because I spent about 6 hours online trying to get the microphone to work and so far, nothing. Thank you! Patti

  Hello

  1. What problem is only on Skype?

  2. were you able to use this microphone earlier?

  3 have there been any changes made on the computer before the show?

  4. what operating system are you using on your computer?

  I suggest you to consult the steps mentioned below and check if it helps.

  Run the troubleshooter of sound recording
  Click on the link below and run the troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  See the following Help article.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  If the problem persists, then I suggest you to contact Skype to get help.

  https://support.Skype.com/

  It may be useful

• Compaq presario R3000 Intel P4 2.4 ghz

  Hello everyone,

  It's my second company with a computer compaq laptop, it began its life with me after having been almost entirely immerse in water.

  I now resurrected the motherboard of ashes so to speak - just have the 1394 and the usb2 port on this side to enter the order (like a lost cause)

  Anyway, I started the mobo Infact that I use to write here on my test bench, I lightly with the bios problem that maybe someone can help?

  Seems all the tags, sno., ect uuid are now replaced by Chinese characters lol, that it is a result of the previous owner or water damage is not possible to say. Obviously, I initially far flashed the Bios, however it seems that these data remain unchanged probably not a writing area or something that is copied across for obvious reasons, I guess. Seems to me it would be protected by some sort of program/utility to repair this area, changes in the mobo must require in a service center. I have Phlash16 that seems possible to edit the information by using this utility, but appears long.

  Anyway, anyone know a reasonably simple to get this sort? I'm thinking of decompression of the bios change and flashing the chip with a dump directly edited to reinsert the data - don't really want to go there lol even though I have enough experience to do I don't know.

  Things stand the mobo of laptop is not recognized by the automatic detection for model HP compaq, it seems so likely there will be problems when using microsoft support area since I reinstalled obviously an OS that is pre-activated and in its current form, they are not would still be a compaq/HP type lol.

  I thank you for the research and assistance, you may be able to offer, pending if I find a way to solve this problem, I will present my findings and how.

  TBC

  Well, that was easier than I expected lol.

  Find a copy of HPBC107.exe (not easy, but they hit)

  If no drive disk, then you need to create a bootable cd, in my case for ease, I used a standard back to bootdisk.com bootable image. Insert a cd player usb to the sides of the Interior. copy HPBC107.exe to a disc, but also the BIOS rom image (it is said to do in the Readme app well that I am not convinced that this was necessary). I went from a: d.: after the start and connected the internal drive of the app.

  Nice screen pops up, a lot of service options including model series, uuid ect.

  I read all the data and it was indeed quite clear! Despite the junk on the page of the bios. It seems that the series mobo was not correct, that perhaps he had been changed out in the past, who knows. I corrected as well as rewriting all the other data. took about 2 minutes.

  A reboot in the bios and happy days - no more Chinese characters ect.

  The very best BIT - now the usb2, and 1394 ports have burst into life!

  the app is good for a few models which it says in the readme file.

  Supported platforms: HP NX9100, NX9105 HP, HP NX9110, Presario R3000 Presario R4000 Pavilion ZV5000, Pavilion ZV6000, ZX5000 Pavilion

  That's a revelation:

  Distribution:
  This tool is confidential HP.  In no case this tool fits a client directly.  This tool is made available to authorized service HP partners and free support through CSN only.

  ^^ Is very useful is not it, I can't think of one good reason for this!

  hope this effort bit helps someone.

  TBC

• Compaq Presario R3000 how to get the sound to work with Windows 7 RC

  (1) download SP29586.exe: ftp://ftp.hp.com/pub/softpaq/sp29501-30000/sp29586.exe

  (2) execute, create a swsetup c:\ directory

  3) once all files are extracted DO NOT INSTALL

  (4) now Goto the Start Menu click on devices and printers, click the name that you called your machine this will mark will be a yellow triangle as the audio driver windows 7 already installed is a realtek ac 97, which does not.

  (5) once your Machinename, you will see a general tab and then Hardware tab select the Hardware tab.

  (6) seeking the Realtek ac 97 under the functions of the device, select it and click Properties,

  (7) tab now the driver, now click on update driver.

  (8) select Let me pick from a list of device drivers, now click on disk

  9) click Browse, select the following Swsetup\SP29586\SMAXWDM\W2K_XP location and click smwdmCH6.inf

  (10) the Soundmax driver should come now select ok and next year. Now your sound will work

  Go on the side of Support HP and look for drivers for Presario R3000 and download the driver for Audio "SP28552" but do not install it. After you download the driver, search for the driver on the folder file download you too and right-click on it and select properties and then select "Change the setting for all users", once the pop-up window, select Compatibility Mode and select it for Window XP Service Pack 3 all the and click ok. Once you ok it click on the file to put in place and follow the steps.
  
  I did it on my Compaq Presario R3000 which has Window XP and I installed Windows 7 Enterprise 32 bit on it and it awesome except for the Audio that I just decided to work, but I still have problems with the Base system device drivers.
  
  I hope this help you with the problem of noise.

• The Compaq Presario CQ41 does support 64 bit OS?

  I went in a chain retailer and I noticed the Compaq Presario CQ41 was running Windows 7 Home Premium 32 bit, but had 4 GB of RAM installed (which he could not fully use). The stafff I asked why and they said HP/Compaq laptops cannot run 64-bit.

  The Compaq Presario CQ41 does support 64-bit so it can used the entire 4 GB of ram?

  The Compaq Presario CQ41 will also support a 64-bit Windows 7 operating system.

• Service Manual for a computer laptop Presario R3410US or R3000 Series

  Looking to change a screen on a laptop Presario R3410US and I would like to find a service manual, so I know not how to disassemble the casing and remove the screen safely. I did Dell, laptops, and I found a manual on their Web pages. If someone could point me in the right direction it would be greatly appreciated.

  Thank you

  Usatraveler

  It's here .

  Kind regards

  ERICO

• HP Compaq laptop: windows update problems

  Hello

  Could someone help please, for the last few weeks where are updates of Windows security and I think that all is well I keep getting messages flashing up to say that updates could not be completed. This seems to be only on some of them, I'm not very tech savvy and have no idea how to do to fix this, it would be good if someone could tell me in simple terms how to overcome this problem.

  Thanks in advance

  John G

  Hi @Johnymac,

  Thank you for your response.

  What is your specific model of HP Compaq laptop?

  There is a link in my previous post to help you find this information.

  If you have a firewall (firewall of Windows example) make sure that Windows update is on the white list. You can also try disabling the firewall and retry the Windows Update to see if that helps.  If it do not forget to reactivate it later.

  Have you checked against viruses and malware?

  Microsoft offers also get help Windows 10.

  Microsoft Corporation / Customer Support

  1-800-642-7676

  Microsoft Support contact us

  Please keep me updated.

• Windows XP x 64 SP2 does support WPA2?

  I read on a website that XP x 64 SP2 supports WPA2, but I can't select any of the PC / laptops although they were all equipped with cards "N". We have a wireless ad - hoc network and all PCs / laptops connect mode 'G' @ 54 Mbps. The network is very stable. Sometimes, the internet is a little slow, maybe because of the bandwidth shared by multiple PS and laptops, our server provide the sharing of files, printing and internet services for all PCs and laptops. We would benefit from the faster wireless network?

  Thank you for reading.

  Jennifer

  Windows XP did not support WPA2 until SP3.  There is an update, however, which will add support for WPA2 to SP2.  The update is located at the:

  <>http://www.Microsoft.com/en-US/Download/details.aspx?ID=24561 >

  The "System requirements" section indicates only XP SP2, but the name of the file that is downloaded is a file 'x 86', which concludes that it would not apply to an x 64 installation.

  HTH,
  JW

• HP laptop - 17-p000na AMD R4: unknown PCI device

  Hello all, first time on this forum...

  I recently bought a HP 17 laptop p000na with AMD R4, it came with Windows 8.1 64-bit installed.

  I do not earn 8.1 and in all cases, some specialized software that I use is better coimpatible with Win7 32 bit, some older software works better on XP 32-bit, some same needs BACK... I therefore immediately has got rid of 8.1, partitioned the drive and installed Win7 64 bit, Win7 32 bit and XP 32-bit SP3.  I got a slow start installing these operating systems, but was eventually successful, it!

  I managaed to encourage drivers to just about everything in the Device Manager in the two Win7 32 bit and Win7 64 bit, a combination of AMD support site, HP, support from Realtek site support site. etc... But I find myself with an unknown PCI device in Device Manager.

  I hope someone can shed some light on what may be the PCI device and where can I download a driver for it.

  I still have to get arouhd to sort the XP drivers - I might wonder about this later!

  Thanks for reading,

  Simon

  Hi, Simon:

  If this is the label of the device, you must first driver on the list from the link below...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• How can I start using my webcam on my laptop. It's a Compaq laptop

  How can I start my using webcam on my Compaq laptop.  It is not even mentioned in the brochure of reference

  Hello

  go to HP to the below link - enter your number of model-look for a manual on how to use it

  http://WWW8.HP.com/us/en/support-drivers.html

• Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation.

  Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation. HP can't help. Your say talking to HP and HP technicians say they are unable to help him. I'm now using valid XP. HP say that conflict with Vista. Can anyone help?

  original title: VISTA VS. XP

  Your technicians say talk to HP

  Sorry, this is not Microsoft.  This is a public forum from user to user hosted by Microsoft on its servers for the comfort of its clients, and we all here are volunteers.

  You say you use XP.  What is your question?  What do you mean 'conflicts with Vista?

  I suggest recovery discs you order from HP for your computer.  If HP is no longer the issue of stocks you can order such a third of Recovery - Disks.com.  There are several of these companies.  If you are going to use XP, you need to install XP from scratch and this means that you need XP drivers for your brand and model.  If HP has no XP drivers on your computer you must not try to use XP on it.

  Remember that Vista Starter, Home Basic, Home Premium and Ultimate out of Microsoft support on 10 April and there will be more updates, including critical security patches after that date.  Only Vista business and company will continue to receive updates.  You might consider this a good time to upgrade to Windows 7.  You must download and run the Windows Update Advisor once you restored Vista successfully.

• vista home premium upgrade drivers to support wpa/wpa2-psk for wireless network connection

  Implemented just a router Belkin Wireless home on Mac and intended to use a my laptop Toshiba (PC) via the wireless router wireless.  The PC has found the wireless connection and I am able to sign - on with the security key, however, is there no internet access.  After a phone call of support Belkin, I was told that my repressive operation, Vista Home Premium (on my PC), needs a driver update to support the security settings WPA/WPA2-PSK (which is how the Belkin router is set for more security, apparently).  How/where can I get this driver update?  Help, please?  Am about to throw computers out the window...

  You get the update appropriate for your device wireless to laptop Toshiba laptop model.