PC Doctor has no error codes

Similar Questions

• The MS Virtual WiFi Miniport Adapter on my new laptop computer has an error code 31.

  The MS Virtual WiFi Miniport Adapter on my new laptop computer has an error code 31.  I tried to update the driver but no change.  Driver date: 21/06/2006, driver Version: 6.1.7600.16385.  Also get errors BOUNCING 'blue screen '.  The Virtual wifi miniport adapter error would be a factor? My laptop is old 3 days and the only programs I have installed MS Office 2007 & Norton Antivirus Internet

  I've heard rumors as if it were a set of chips intel, they have just released new drivers last week.

  It's two days old, I think that return to the store and get another would be in order...

  Latest Intel drivers:
  32-bit - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18211&ProdId=3062&lang=eng
  64-bit - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18212&ProdId=3062&lang=eng

  Help others by letting us know if something solves your problem. Click useful Vote for those who help.

• Creative cloud has failed (error Code 1)

  Creative Cloud has failed (error Code 1) what can that do to remedy the problem.  He first told me that an update was already running.  It was, and I turned it off.  Then I got the error code 1.  What to do next?

  restart you computer and try again.

  If you see the error code 1 again, error: "unable to install". Creative Office Cloud

• PC Doctor BIOHD-2 error code

  HP Pavilion FK484AV-ABA, model m4900t running windows 7 64 bit. The RAID-1 configuration.

  PC crashed. Cannot restart. Starting cold, received error message failure of RAID-1 and two hard drives. PC-Doctor ran and received the following diagnoses:

  Processor, memory, drives hard all OK.

  Diagnosis of startup path

  Error code: BIOHD-2

  ATTENTION: No disk is detected.

  Suggestion: Turn off the system and check the drive cables are attached firmly.

  Given that the PC-Doctor verified that both drives are OK, I'm assuming that the cables were also OK. Any suggestions on what may be the problem?

  Thanks in advance for your help.

  Go into the BIOS to see if the discs are recognized. Post your results here.

  This is an unusual condition for PC Doktor to report. Normally a BIOHD-2 error code means that a hard drive has failed, but I have no doubt that both drives failed at the same time.

• HP deskjet 3050 a: hp deskjet 3050 has 0xb04021a6 error codes

  At the error code 0xb04021a6 on the screen of the printer at the time wherever you turn it on.

  Have research all day but unable to know what means this error code.

  Hi @e-year-e.

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you have a HP Deskjet 3050 has e-all-in-one printer showing an error code "0xb04021a6" when he is running. I would like to help.

  These error codes are caused by hardware or firmware issues.

  "Here is the document of suppiort designed to be used with this problem - ' 0xc19a0005" or similar error.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Updates Windows 7 has failed: error code 646

  Every time my computer trying to install MS security updates most of the updates fail.  I currently have 19 updates which will not be installed.  I get the error code 646.  I have disbling my firewall while trying to install updates, but that did not help.  I'm on a wireless network if this has an impact on it.  Please help me find a solution.  Thank you.  KAH42

  Kah,

  the KB includes an automated fix this that solves the problem. Look here: http://support.microsoft.com/kb/2258121

• Office automatic however, patch cumulative for Activex killbitts for windows XP (KB2736233) has failed. error code is 0 x 80070017

  During an office automatic however, patch cumulative for Activex killbitts for windows XP (KB2736233) has failed.   error code is 0 x 80070017... How to fix this?     He tells me that the installation failed, and when I close it, it asks me to install the update even.   Thanks in advance for the help.

  Hello

  1. have you made changes on the computer recently?

  2. What is the security software installed on the computer?

  3. are you able to install some other updates?

  4 is that the problem is specific to this update?

  I suggest you to follow the steps in this article and I would like to know the status.

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: '0 x 80070017': http://support.microsoft.com/kb/956704

  Important: While performing the check disk on the hard disk, if bad sectors are, check the drive will try to repair this sector. All the data available in this area may be lost.

  I hope this helps.

• Update InDesign CC has an error code: U44M1P34

  I tried to upgrade to the latest patch for this software, but it does not work.

  I uninstalled, rebooted and reinstalled the application, but he said just that the application has been installed, but there was an error with the patch.

  When I try to install the update manually, it always happens with the same error code.

  What is going on?!

  Someone else has the same problem?

  It comes also to the top with this dialog box when loading the application.

  

  If all of the steps fails, and if you have not installed Adobe applications, you can check the link below:

  I tried to update Photoshop and get the error try update later with error U44M1P34

• Has this error code 66: the update will not download. That's a given. but this may be the problem check certificate

  error code 66A for security for MS .net framework update 4 I have not see a certificate to all to clik on and allow it to download? I do or can I get this information from ms download page and install it manually? New on win 7.

  Choose one or two: http://social.answers.microsoft.com/Search/en-US/?query=66a%20%2b%20KB2160841&rq=meta:Search.MSForums.ForumID (f713b70a-5915-4a57-af67-a2252a86a8f1) + site: microsoft.com & rn = Windows + Update + Forum ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Security updates has no error Code 80070002?

  Hello

  I have problems with the latest security updates not configured correctly by trying to download them.  The error code I get is 80070002.  I have Vista Home Basic.  I have already deleted the update files and try to re - download updates - without success.  What can I do?  Thank you.

  Zachery

  Windows Update Error 80070002
  http://windowshelp.Microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  TaurArian [MVP] 2005-2011 - Update Services

• (Vista) Updates for Microsoft Office has failed: Error Code 646

  Hello

  I tried several times to download and install the automatic updates of Microsoft Office 2007, however, they have failed repeatedly to install.  When this happens, I get error Code 646  Microsoft Office Publisher 2003, which is no longer on my computer, is offered several times for me.  I would appreciate your comments on this issue. Here's the updates that have failed to install:

  Update of security for Microsoft Office Excel 2007 (KB978382)

  Update type: Important

  Update of security for Microsoft Office Publisher 2003 (KB980469)

  Update type: Important

  Update of security for the viewer Microsoft Office Visio 2007 (KB973709)

  Update type: Important

  Update of security for Microsoft Office Word 2007 (KB969604)

  Update type: Important

  Update of security for Microsoft PowerPoint 2007 (KB957789)

  Update type: Important

  Update of security for Microsoft Office 2007 System (KB969559)

  Update type: Important

  Update of security for Microsoft Office System 2007 (KB969613)

  Update type: Important

  Update of security for Microsoft Office System 2007 (KB972581)

  Update type: Important

  Update of security for Microsoft Office System 2007 (KB974234)

  Update type: Important

  Update of security for Microsoft Office System 2007 (KB978380)

  Update type: Important

  Update for Microsoft Office InfoPath 2007 (KB976416)

  Update type: Important

  Update for Microsoft Office OneNote 2007 (KB980729)

  Update type: Important

  Update for the junk e-mail in Outlook 2003 (KB981432) filter

  Update type: Important

  Update for Microsoft Office Word 2007 (KB974561)

  Update type: recommended

  Update for Microsoft Office System 2007 (KB981715)

  Update type: Important

  Thank you for taking the time to review and answer my question.

  Karen

  ·                         http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If this does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  Mick Murphy - Microsoft partner

• Update for Windows XP (KB2567680) security has failed - error Code: 0 x 80070003

  Security update for Windows XP (KB2567680) failed - error Code: 0 x 80070003 I tried to install update 3 - 4 times but it continues to not be updated, can someone please tell me what to do.

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  When you search for available updates on the update site, you see the Error 80070002 0 x or 0 x 80070003
  http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=17&LN=EN&IsMu=false

  Error message when you try to download the updates on the Microsoft Windows Update Web site or from the Microsoft Update on a Windows XP computer's Web site: "0 x 80070003".
  http://support.Microsoft.com/kb/916248

  Some have had success with

  1. stop the service automatic updates, clear the contents of the DataStore and Download folders and restart the automatic updates service.
  Stop the automatic updates Service.
  Click Start, choose Run, in the run box type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Select Properties.
  Under Service status, click on stop.
  Click OK.

  2 remove the contents of the DataStore and Download files.
  Click Start, choose Run, in the run box, type %windir%\SoftwareDistribution
  Click OK.
  Delete the contents of the DataStore files so download

  3. start the Service automatic updates
  Click Start, choose Run, in the run box type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Select Properties.
  Under Service status, click Start.
  Click OK.

  This procedure will erase your history on the Windows Update Site.

• Update for Windows XP (KB959426) security has failed - error Code: 0xD0000135

  original title: update for Windows XP (KB959426) security failure?

  Error code: 0xD0000135

  Uninstalling the service pack 3 and re-installed.

  Updated everything, but this update 1 always fails.

  It's an old update, so I should ignore it, or is it important?

  Thank you.

  Andrew

  Hi André,.

  ·          You have security software installed on the computer?

  Method 1

  I suggest that you reset the Windows Update components and you try to install the update, check to see if it helps.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2

  If the previous step fails, then I suggest that you manually download and install the update, check if she moved very well.

  Update security for Windows XP (KB959426)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=3de0684d-605C-489B-bdc7-08bce9b2d4f6&displaylang=en

• Try to update windows - (8007000D - has no error code) stops windows completely updated. Fixes for this error code?

  I tried to completely update of windows, but the 8007000D error code keeps causing the update fails. The update is for - Cumulative Update for Media Center for Windows Vista (KB982480). Could you be it someone please let me know if there are patches to get rid of this error, or get the update to pass by? Thank you!

  Hello

  You are able to install some other updates?

  I suggest you follow these methods and check.

  Method 1: Run the fixit.

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/   

  Method 2: Run the clean boot and install the updates.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  If the method above does not work, proceed to the next method.

  Method 3: download and install the Cumulative update for Media Center for Windows Vista (KB982480) from this link.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=6256

  If the method above does not work, proceed to the next method.

  Method 4: Rename the Software Distribution folder.

  Rename the temporary Windows Update Software Distribution folder. To do this, follow these steps:

  1. Open an administrative command prompt window.
  2. Run the following commands and press ENTER after each command:
  3. 1. Net stop wuauserv
     2. CD %SystemRoot%\System32
     3. Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     4. Net start wuauserv
  4. Try to install updates again.

  Important: When you use this method, the following problems occur:

  ·         Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.

  ·         When you remove the Software Distribution folder, your download history is deleted.

  ·         If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  Note If the problem is resolved and you can successfully download and install the updates, you can safely remove the SoftwareDistribution.old folder to recover disk space.

  I hope this helps!

• kb2310138 has no error code 800705 b 4

  Please advise... I can't get the KB2310138 update that repeatedly fails with the error code 800705 b 4.

  I just restored my computer about a month ago and I am so afraid that this problem can be the beginning of

  another computer crash.  Any advice would be appreciated.

  Hi, Susan,.

  Try the following:

  http://Windows.Microsoft.com/en-GB/Windows7/Windows-Update-error-800705b4