PC does not go on standby mode

Similar Questions

• Satellite Pro L10 does not go on standby mode

  After a virus and reinstall all my programs and drivers etc, my computer won't now, go in standby mode.
  When you go to "turn off computer" option ensures their but is grayed out and you can not click on it.
  Power options in my Control Panel on them is not an option to set the day before to the top.

  Can anyone help?

  Hello

  In my view, a Toshiba Power Saver must be preinstalled and there you should be able to enable or disable the standby or hibernation mode.

  Check it!

• X120e bad DIMM location. System does not return from standby mode

  Hello. I have a X120e running Windows 8.1 Pro x 64.

  I just put the unit to 4 GB of ram (2 x 2) of 2 GB (1 x 2). Whenever the upper DIMM Slot is used, the system will not leave standby mode and all power, including the battery must be removed from the system so that it works normally again.

  Of interest, all the ram tested with Memtest86 +.

  If it's important the system has the e350 CPU and a 320 GB HARD drive.

  Let me know if you have any input.

  Thank you!

  Update: I've updated the BIOS from 1.16 to 1.17. The system now between and leave pending normally as it should, with the two occupied ram slots.

  Of interest, none of the BIOS settings changed after the update.

• C40 Cisco does not go on standby mode

  Hello

  I have a problem with a Cisco C40 where the codec simply is not going to go into sleep mode. I tried every possible thing to make it work, but without success. When I use Putty and you connect to it and sent the normal control: xcommand Eve turn on it goes to sleep. I also did a system reset, without success.

  When using the graphical interface and tell the system to go into mode after 1 minute, the system will remain forever.

  Anyone else having this problem, I have a second Cisco C40 who started doing this morning so I'm not sure what to do. I also noticed that the codec comes out of sleepmode the source presentation will change also to the main camera.

  Kind regards

  Cornelis Stoop

  The problem may be caused (in the screenshot eln_1.png) to have the Source of presentation to the source of the main camera.  This must be set on an other sources and not the main camera.

  Able to provide the whole xconfig one of the devices having the question rather than just two screenshots of the web interface, which do not show everything?

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Computer will not remain in standby mode.

  I have a computer with Windows XP, about 5 years old who often will not remain in standby mode. After 30-45 seconds it starts again and the display shows again the office.

  Does anyone have a suggestion/recommendation what to do about it?

  Thanks, any suggestions would be appreciated.

  Hello JJLinker, welcome.

  The issue is likely caused by "Wake by " settings in your power options. This gives a shot:

  1. click on START
  2. right click "My computer" and select "Properties".
  "3. click on the tab"Hardware", then select Device Manager.
  4. expand the "Network adapters" category
  5. right click on each of the devices and select "Properties".
  6. on each, go to the tab "power management."
  7 turn off the checkbox "allow this device to wake...". ' and click on 'Ok '.
  8. close all windows and restart the computer

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I don't have a navigation bar and firefox does not open in safe mode to return to the default configuration. Does not work reinstall. Any help please.

  I have no navigation bar since I closed it to have more space on the screen. It will not re - open. Firefox does not open in safe mode, but immediately opens in normal mode with the new configuration incorrect, so I can't reset to default configuration. I deleted Firefox and re-installed and it always opens with the same faulty configuration. Why doesn't Firefox give me the safe mode dialog box, why can I not re - open the navigation bar, and how I can do those two things, please? Firefox is currently unusable for me without a navigation bar with no access to the default settings in safe mode. I can't search the extensions that I use since I have no navigation bar to go to tools, modules, Extensions.

  This has happened

  Each time Firefox opened

  I closed the navigation bar to make more space on the screen and I could not re - open.

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0)

  Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar and the bar of Navigation, so that they have a check mark.

• XP does not restart in safe mode or any mode.

  clicked on "Download updates and shutdown". Morning then tried to reboot and XP does not restart in any mode. Continues to rerun initial time and again, go to the 'mode' screen for 25 seconds and then starts again.

  See the section "How to get help" of http://support.microsoft.com/kb/977165

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates

  Or you can...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Home Security page customer & Microsoft Update Solution Center also offer support options
  https://consumersecuritysupport.Microsoft.com/
  http://support.Microsoft.com/ph/6527#tab3

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  And then, if your computer is still infested with hijackware, maybe the updates did not cause the problem? =>

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/fa39a531-b865-4de5-a0fd-2ddc075aacff

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows xp does not boot in any mode

  I still can't find info on windows xp does not start in any mode.  Keep the loop on the screen where it has the Safe Mode, Safe Mode with network, last Configuration know, etc.  Any solution?  I appreciate your time.

  Do you have household XP No Boot Troubleshooting as stated in the post sticky at the top of the forums?

  They were practically useless, I'm happy that they were taking him down.

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank:

  My system worked well until: _.

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Windows XP Professional does not work in normal mode. I can't find my Windows CD to repair it but. What are my options?

  Windows xp pro does not work in normal mode.  I can make it work in safe mode.  I can't find my XP cd.  I don't have the serial code and key.  How can I load xp and try to fix the problem.

  Thank you
  Mike

  original title: need windows xp pro

  Hello

  Since it works fine in safe mode, I suggest you to try to perform the audit and the boot if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• Windows xp does not start in safe mode how to

  Computer says windows did not start successfully and does not start in safe mode, will not restart, do not go back to the last known good configuration

  When you choose to start safe mode, which is the last thing you see on the screen?

  When you arrive at the menu of Boot Options Advanced F8, you need to choose in this menu, the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  You won't get past step 1 of KB307654 or install the Recovery Console or do a repair install without a real XP bootable installation CD that matches your currently installed Service Pack (very unlikely).

  You have a real installation CD bootable XP that corresponds to your currently installed Service Pack?

• Does not start in safe mode.

  Does not start in safe mode.  "System Tools" jumped to the top and I couldn't get our of it.  Shut down the system to turn everything off.  When I try to reboot in safe mode, I get to the scren that ask for your system press operating enter and get a black screen.  Help?

  Thanks for the help.  Hard drive died.

• Keyboard does not work in safe mode

  Sometimes, when I have a problem the tech asked me to use mode without failure for certain tasks. But my keyboard does not work in safe mode. I am NOT using a USB - I have windows xp service pack 3. How to remedy? blondeagent99

  Sometimes, when I have a problem the tech asked me to use mode without failure for certain tasks. But my keyboard does not work in safe mode. I am NOT using a USB - I have windows xp service pack 3. How to remedy? blondeagent99

  With windows, access device mgr by right click on my computer > properties > Hardware tab > Device Manager button. Locate the keyboard in the list. Right-click on it and select the driver tab choose to uninstall the driver. Now, click on the button to update the driver. See if this will solve the problem.

  Kind regards

  Joel

  Free computer support and diagnostics-->> http://repairbotsonline.forumotion.com/

• After you have installed SP3 (on XP with SP2), the PC does not restart in normal mode, only in safe mode

  After you install SP3, PC does not restart in normal mode, only in safe mode, without giving a clear indication of what is the problem or how to fix it - other than say to check settings in the Panel (not very useful).

  PC is a Compaq Presario desktop with AMD processor, model #: SR1720AN product #: EL540AA-ABG

  I reinstalled the operating system recovery disks, which reformats HD and installed XP with SP2.

  I then installed the SP3 from a flashdrive (361 MB files). Everything went without hiccups, but final restarts, he won't get to normal mode, safe mode only.

  I did it twice.

  Any ideas? Thank you.

  Here are the specifications of your desktop Compaq Presario SR1720AN. According to the specification, this model comes with a processor AMD and Windows XP Home Edition SP2 installed at the factory. According to your description, it seems that the HP recovery discs may have been poorly photographed for an AMD-based computer. Please see this Microsoft article and this HP document about your problem.

  To solve your problem, please reinstall Windows XP SP2 by booting from your HP recovery disks. After Windows XP SP2 is complete restored and that your computer is operational, download the "Windows XP SP3 with AMD CPU upgrade utility." Run this utility, and then restart your computer. Then download the "Windows XP Service Pack 3 Package of Network Installation" for it professionals. You can also try to use the SP3 Installer on your USB. Install the update to Windows XP SP3 and then restart when you are prompted to.

  This solve your problem?

  Please send BRAVO

• Windows Vista does not start in normal mode

  My Windows Vista-based computer does not start successfully in mode noirmal upward. I restart and it is very slow. Finally I can connect and my come almost all my desktop icons. Almost. At this point, it seems frozen. Left click and it becomes totally frozen, including the white frozen screen Milky wit the icons in a blurred background. At this point, I can nothing but disable it at the tower. Restore the system to an earlier point has failed. Any ideas?

  See...

  My computer is slow!

  http://miekiemoes.blogspot.com/2008/02/help-my-computer-is-slow.html?

  List of troubleshooting for a slow computer

  http://www.bleepingcomputer.com/forums/topic44694.html>

  What to do if your computer is running slowly

  http://www.malwareremoval.com/tutorials/runningslowly.php>

  04/12 / 1107:23: 14:00

• Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome.  System also starts on the Vista CD.

  System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.

  That's it, that's all what he will do.  I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.

  I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.

  Help or direction is appreciated.

  original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer).  Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.

  So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step.  Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair.   Check out several options and compare the costs, quality and guaranteed and then make your best decision.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.