PC does not recognize video card

I had bought an EVGA Geforce GT610 graphics card and installed in my HP Pavilion 500 - 54 (Windows OS 8.1). When I tried to install the video drivers (latest drivers from EVGA) for the new video card I received a message as the "graphics driver cannot find compatible devices. Also the new map did not appear anywhere in the graphics card or anywhere in the Device Manager. I've disabled the secure boot mode and disabled slot security legacy for the pci slot where the video card. Yet I still can't the PC to recognize the video card (which is compatible with this system). I tried to uninstall the pilots on board, but that did not help. The PC should recognize the video card, when he was put in the x 16 pci slot. Someone has or has had this problem and have you found a solution to the problem. And Yes, I have tried the card in another PC and it works fine. I have exhausted all avenues of solution up to now and still can not solve this problem. Any advice or fixes will be greatly appreciated.

Only, I solved the problem. It turns out that the instructions on adding a video card failed a defintely detail to include.  As well as strives mode, you need to go into the boot settings and select legacy boot.  I thought that ithat legacy mode automatically would have done, but I shouldn't assume. All is well now. It detected the video card and drivers have been installed. Thanks for the suggestions. I hope this helps someone else with the same problem.

Tags: HP Desktops

Similar Questions

  • Vista does not recognize video card

    I recently moved, and after I put my computer my monitor is not a signal. I plugged my monitor on the main port and it came. My computer does not recognize the card in the Device Manager. I opened it and inspected the map for all the Visual problems and plugged it upward and noticed that the fan on the graphics card not working. I then did a full restore of the system, reinstalled the installation CD supplied with the card after you disable the onboard and restarted my computer. Still does not recognize the card and after restarting it on my integrated card. Then, I went into the BIOS and selected PCI-E as my first. So... im out of ideas here, if the fan is still ongoing is not the card still work? I don't have another office to plug it in. Is there another way to know if the card works? Why it can't recognize the graphics card which was working fine before the move? On a side note, the computer was unplugged for 2 weeks during this time, but I don't know why this could be a problem.

    IM using Vista 32 bit.

    Hi Myriam.
    Thank you for visiting the Microsoft Answers forum
    If the fan on the card does not is an indicator that the card is not powered, so the only way to test it is to plug it into another machine to see if the motherboard is not giving power or is the card that is bad. You can also try to plug a PCI-E device and see if it has power.

    You have all the cables connected directly from the power supply to the graphics card?

    Martin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • HP 15 t J000 does not recognize video card

    Hi, I have a j-000 to 15 t.

    I don't know if this laptop comes with a dedicated video card. In ccleaner or Manager only on-board devices Intel graphics appear. But on the laptop has NVIDIA GEFORCE sticker. It may be a problem of recognition?

    I tried to install the driver but said that there is no compatible hardware.

    Hi Ghesto,

    Welcome to the HP Forums!

    You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I understand that you have a sticker on the laptop for NVIDIA GEFORCE, but it is not recognized, your system is a CTO, so I couldn't pull up of general specifications for it.  This is a documentation on the switchable graphics that I think will help.  Overview of the switchable graphics or Dual GPU.  I think it's the right one for your system as you say Intel is recognized and the vignette tells us that you also AMD. Switchable graphics on laptops configured with Intel and ATI GPU.  If you need assistance, private message with your serial number and I should be able to pull up to your specifications.

  • TS15g067cl laptop: memory card reader does not recognize the card

    The card reader does not recognize the cards.  It does not have a drive location (example: f drive).   This makes it impossible to veiw the files or photos on any (I tried six different) of my SanDisk SD cards.  I can't find anywhere to downlod corrected card rhe read updates update drivers or BIOS for my system.   I just bought this computer 1 week ago and do not understand why I read in the forums about driver issues of card reader for the last year.  Windows 8.1 has been out for some time.  Why HP would sell these computers without updating the software to make them work as they should?

    Thanks for the info.  Disk management does not show the drive.  The problem was resolved after reloading BIOS, as suggested in another post.

  • ASUS Tablet does not recognize SD card

    My got transform TF 101 does not recognize micro SD cards. How can I solve this problem?

    Hi, Odiec,

    You have the software express gate on the system?  Update of the software

    http://support.ASUS.com/search/KDetail.aspx?SLanguage=en&no=80E22F30-B3FF-1DFE-9DFB-5CED63C0B176&t=2

    Put the card in the slot

    Restart the computer

    Now the system does not recognize the card?

    You formatted the card?
    https://www.sdcard.org/downloads/formatter_3/

  • Photoshop does not recognize my card 960graphic GeForce GTX

    Hello

    I need help on my graphics (GTX 960). Everything's fine (yesterday until I update an extension called FlatIcon (Fi)). I used it for a long time and nothing wrong. Now, Photoshop does not recognize my card. I updated the driver NVIDIA, photoshop set to run as a high performance with NVIDIA Control Panel, remove FlatIcon extension, reset prerefences (Alt + Ctrl + Shift), increase the size of the Scratch drive (200 GB free now), but without hope. I hope someone can help me solve this problem, thank you 1 million.

    Wood

    Can you have a think when this started.  Could he have when you went from CC2014 to CC2015 for example?  CC2015 makes the best use of the GPU acceleration and seems to be more picky about the material.

    You are not able to check the use of GPU acceleration at all, or simply not advanced drawing mode?

    What driver version are you using?

    FWIIW, my experience with a GTX970 was that I could only use Basic Drawing mode in CC2014, but it suddenly allowed me to set the mode advanced for awhile and then changed me back to the basic mode when I upgraded to CC2015

    353,3 get mode advanced for a short period, but it passed without known reason.

    Displays how do you drive?

    You have only a GTX960?

  • Satellite C55T: Win 7 does not recognize the card, LAN and WLan

    I have a problem.

    I ve downgraded my Toshiba Satellite A5222 C55T for Windows 7 64 bit and it does not have many pilots.
    Windows does not recognize my network connection and it didn't install my wireless driver.

    Maybe I need a chipset driver, but I found no drivers for windows 7.

    Please help me!

    If Windows 7 has not recognized the LAN and WLan card, you have not installed the proper drivers.

    A5222 C55T satellite is the portable American model.
    The drivers can be downloaded from the Toshiba help page we: [Satellite C55T-A5222 | http://support.toshiba.com/support/modelHome?freeText=1200005866]

    Choose here the drivers / updates & filter by Windows 7 64 bit (left)
    Now you should get all Win 7 64 bit drivers for Satellite C55T-A5222

  • Windows does not recognize my card or my camera drive

    Windows does not recognize my sd card reader or my camera.   I have no problem with all the other devices such as printer, Mp3 player (all) external drives.

    Thank you

    Laurie.

    Hi Laurie,

    ·         Have you tried to connect the card reader on different USB ports on your computer?

    We will check if the following is useful.

    Method 1: Try to connect the flash drive to different USB ports on the computer and check if it helps.

    Method 2:

    Step 1: Try to reinstall the USB controllers and check if it helps.

    a. click the Start button and then right click on my computer. Click on properties.

    b. click on the Hardware tab, and then click Device Manager. Expand the Bus USB controllers section by clicking on the sign «+»

    c. each of the devices under the USB controller section uninstall by right-clicking on each one, then click on uninstall.

    d. close Device Manager, and then restart your computer. Windows XP re - automatically installs the USB controllers in your computer, so you don't have to do anything further. Your computer is now running properly USB devices.

    Step 2: Log on to the manufacturer's Web site and update the latest chipset drivers and other updates to the device driver.

    See also:

    How to manage devices in Windows XP

  • does not recognize sd card

    my computer does not recognize when I insert my Secure Digital (SD) card. I have already tried to turn the computer off and then back on. I also tried the card in every hole, but nothing works.

    Hello dallyglr14,

    Thank you for using the Microsoft answers Forum.

    You may have a hardware failure with the card itself. You could try to plug it into another computer and see if the card is recognized. If the card is faulty, you will want to contact the manufacturer to determine if there is a way to diagnose the problem.

    Plug the device on another computer to verify that it works correctly and let us know what you find.

    Judd
    Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Reference Dell place 11 Pro - SD card does not recognize the card

    Anyone else have this same problem? I got my 11 Pro last night (from Dell direct) coming, I tried several SD cards, and none of them does not seem to work. It does not recognize that anything has been inserted into the slot. Very frustrating.

    Out of curiosity, have you tried different formatting on SD cards to see if it helped the recognition (eg. exFAT, NTFS)?

    -Woody

  • Computer does not recognize SD card inserted in the printer

    I just bought an Officejet pro 8600.  When I insert an SD card or Memory stick into the printer, my computer does not recognize it so I can't transfer my photos.  This new printer allows is no longer this action?

    Good to know, message back me when you are ready and I will do everything I can to help you out!

    Have a great day and a wonderful weekend!

    -Spencer

  • a disk hard mbr does not recognize my card mother xp - 703

    Hello.

    I'm trying to downgrade my windows xp-703 aspire 8.1 for windows 7 and cannot operate.

    I disabled the secure boot. Windows 7 will allow to install on an MBR disk, but when I put the drive on the MBR (using another computer) that acer will not see the hard drive.

    I feel, this computer will only recognize the GPT disks.

    I even took a drive work with windows 7 and connected to this computer, and it still does not recognize the drive.

    Can anyone offer advice.

    Concerning

    Clive

    Hi all.

    Thank you very much for all your comments. It is resolved. I now running Windows 7.

    (XC - 703) my mistake in the subject line.

    I need win 7 because I have a software that does not work in win8 or win10.

    It has proved to be a BIOS initially. I got P11 - B1, who does not have the option "Launch the CSM". I had to reinstall win8, so I could run the upgrade of BIOS of windows that I was unable to boot from any external drive. Update BIOS version P11 - B2. Once I had started from my win7 disk (64-bit), I could use SHIFT + F10 to bring up a DOS window and use DISKPART to clean the hard drive.

    He then completed the installation of windows 7. I knew that he should like Acer provides Win7 drivers.

    Once again thanks a lot for your help.

    Clive

  • PC does not recognize the cards inserted media or devices connected to the usb any longer.

    Recently, I noticed that XP Pro does not recognize storage devices of media inserted in the usb slots.

    Hello

    1 how long have you been faced with this problem?
    2. don't you make changes on the computer before this problem?

    The following articles might help you solve this problem.

    Advanced troubleshooting tips for General USB for Windows XP problems
    http://support.Microsoft.com/kb/310575

  • Why vista Media Center does not recognize my card tuner Hauppauge 1850

    I just install WinTV-HVR-1850, Manager of device States work properly, yet Media Center does not recognize the tuner... Keep received message "no tuner found" not could someone explain what I need to do.

    Hello

    I suggest that you install the latest driver and software from the Web site below and check if it works:

    http://www.Hauppauge.com/site/support/support_hvr1800.html

    Try to contact the hardware manufacturer for assistance.

    Hope this helps,

  • Vista does not recognize videos on my SD from Panasonic camera card.

    I have a Panasonic HD camera and record pictures and video on this subject. When I connect the camera to my computer Vista OS ACER 5515, it only reads the photos and not the videos, when I connect the same camera to my XP system, I have no problem with transfer of videos. The same camera software is on both computers. How can I get this problem corrected?

    Hi mark44004,

    1. were you able to transfer videos before?

    2. what happens when you try to access the videos?

    3. what happens if you copy the videos from the camera to a folder on your hard drive?

    4. What is the file format or the file of the video file extension?

    This can occur if a video file type is not supported on Vista.

    Check the link for more information:

    Codecs: Frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit ourMicrosoft answers feedback Forumand let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for

  • Satellite A200-1 g: Fn keys do not work on Vista

    Ont. A200-1 g just to reinstall Vista Ultimate version. Drivers installed page value Pack added. With the mouse clicks on respect all works of FlashCards, but when I press Fn + F1 - F12, nothing happens. When FlashCards started I normally use functio

  • Terminal Server does not

    Recently, I was going through the process of obtaining ImageMagick with the (sudo port install ImageMagick). I installed and like Xcode 3.2.6.  Then I installed MacPorts 2.3.4 10.6 Snow Leopard. Then I opened the terminal. The connection has shown. I

  • Windows vista home premium displayed "startup initialization failed" recovery/repair could not fix

    Gateway Laptop preloaded vista home premium displayed "startup initialization failed" launched the recovery/repair utility and was not able to repair.  now when you start the computer it will launch recover through process then the screen from window

  • error code of HP mini 110 [redacted]

    I have a hp mini 110 with a bios lock. When you inter passes 3 times, it gives error code [number of Series edited by Moderator]. I could really use some help.

  • Try to install the printer HP laserjet 1012

    I just got a new computer with windows 7.  I tried to install my printer HP laserjet printer HP laserjet 1012.  I have the installation disc, but it does not work and the HP site does not list the drivers for this printer.  I'm out of luck, or there