PC HP Pavilion 15-p028TX NB AL: I have a HP Pavilion 15-p028TX NB PC all THE Windows go unable asking power on password.

Similar Questions

• Pavilion 241nd: can not get all the windows 7 drivers for pavilion 241nd

  Hello

  I can't drivers USB host for this laptop model with windows 7. Also not the following drivers

  videocontroller 3D

  PCI simple communications

  The USB host controller drivers

  and als 2 drivers to the unknown. Who can help me. I really need windows 7 works on the 241nd.

  Thanks in advance...

  Best regards, Dennis

  OK, try these new versions of the usb and pci simple comms...

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp71360.exe

  This package provides the driver for the Intel USB 3.0 controller host for the laptop models running a supported operating system. The driver allows USB 3.0 devices.

  File name: sp72661.exe

• HP Pavilion DV6 laptop: how to find the windows product key

  My first question:
  
  I have a laptop HP Pavilion DV6 584037-001 which originally had windows 7 pre-installed on it, but later, I installed windows 10. I would like to know where I can find my windows product key - please help me.
  
  Second question:
  
  How can I make sure that the BIOS of my laptop will recognize a USB key, after that I installed an SSD in my laptop so that I will be able to use the USB to install an ISO Windows 7 Home Edition?
  
  Third question:
  
  The ISO Windows 7 Home Edition will include all its drivers?

  Hi MarcoPolo777, for the key, you can use a software called produkey.

• HP Pavilion n096sa 15 asking power on password

  Hello

  My HP Pavilion 15-n096sa request a power on password. After a few attempts, a message comes up saying "system disabled" and watch 85590016. Help, please.

  Try > 30498038

• HP Pavilion g6-2330dx Notebook: keep displaying the "Windows Installer" dialog box and pressing OK button to restart over and over again

  Hello

  I tried to update my laptop Win8 to Win10, but before that Win 8 must be upgraded to Win8.1 then Win10. Unfortunately, I encountered the problem after you install the free upgrade to WIn10.

  I decided to use the system recovery and the source is from my USB.  (I created the USB key recovery).  The restoration was completed and started making configuration suddenly my laptop just because of the excessive heat caused my laptop stop does not complete the installation of windows 8 and finished to get the dialog box of "Windows Installer".

  I inserted the USB key, but it seems that its not reading. I tried F2 - mode of the system, but it only shows the Bios and other tests not the usual display of F2.  I haven't tried F11 and same thing no chance.

  My question is, how do I make my laptop back to the operating mode as the way to reinstall the entire operating system and HP Recovery Manager or HP configurations.

  Do I need to buy a CD of HP recovery my laptop?

  I have HP reactions appreaciate or someone who is ready to help and assist.

  Thank you in advance.

  Screen of the image below:

  

  Hi there @KierV,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I read your post on the Forums of HP Support. I understand that you had initially a question of upgrading Windows 10. After the upgrade, you have tried to restore on Windows 8 (previous version), and now you have issues going back.

  I did some research for you. I'll provide you with some troubleshooting documents that I had found.

  The first document is called a troubleshooting (Windows 8) HP system recovery problems. If this does not work, please follow this document called recover your computer from a USB flash drive. Please follow the troubleshooting steps in this document to see if you can get the USB recovery media you created to operate.

  If the USB key that you created still doesn't work after you troubleshoot, you can either you make on the Order Recovery Media-CD/DVD/USB and drivers HP Pavilion Notebook PC g6-2330dx Page or you can use the following link to create yourself a file number, then give us a call:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.
  
  They will be happy to help you immediately.

  If you want to try to restore Windows 8, Windows 8.1 upgrade and then upgrade to Windows 10 once again, please read this document called upgrade to Windows 10.

  I hope this helps!

  Have a great day!

• HP Pavilion p6 ask power on password

  I looked on other forums and I don't know if its because of the series, or something, but it does not give me a code to stop or something like that, but I really need help I have almost tried everything. The computer is a HP Pavilion p6 2005, please help

  Hello

  Consult the section "Settings of password of compensation", on the following link.

  http://support.HP.com/us-en/document/c02980014

  Kind regards

  DP - K

• HP pavilion a6244n: HP photo creations update the failure DDC008 unable to connect to internet error code

  Although internet works fine, I get the error that ddc0008 cannot connect.  I tried to uninstall the HP photo creations software and then installing right from scratch, but nothing helped.

  Hello Ilovegoldens,

  You should try uninstalling and reinstalling Photo Creations. See the info from this link...

  Re: Error number DDC0008 - HP Support Forum's - 5209625

  IF this does not resolve the problem, you can open a support ticket with RocketLife (the creator of Photo Creations) and they will work with you to find a solution...

  Photo creations software support | Support for HP Photo Creations

  Good luck.

• Pavilion dm4 1041tx: black screen after the windows logo

  My laptop screen has frozen while watching a video then after restarting it displays black screen but I can connect to windows using the laptop and fingerprint reader can be closed by windows by pressing and then alt + f4, then alt + f4, then enter. Works in safe mode. Disable the ati graphics card did not work. Same execution of recovery did not work.
  Hard drive test results:
  Smart check: past
  DST short: PAST
  Long DST: PAST
  Help, please...

  Hi @vikash4309 ,

  At this point I agree with the tech that look at the computer I think it's a problem with the hard drive or even the system board. They may give falsely on the test results. I would recommend that you take it back to this HP's Service Center.

  If you do not replace the hard drive recovery CDs should work as long as replace you it with another hard drive and not an SSD because they are different and the recovery CD will know how to properly partition the drive.

• HP Pavilion dv7 Notebook B1W88EA #ABU of the Windows 8 upgrade to 8.1

  Hi, I tried several times to upgrade Windows 8 to 8.1.  Whenever I get the message restore you pc to an earlier version of windows (maybe not the correct term).  I made sure that I have all the current updates installed.  Any ideas please?

  Hello

  Do Option 2 in this tutorial to check corruption of system files:
  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  Temporarily disable all anti-virus programs before the victory 8 to 8.1 update.

• How to increase the sound on my new pavilion g6 everything is up all the way, but not very load

  How to increase the sound on my new laptop of g6 pavilian everything is in place but not very load

  Hello

  One thing that can help is a bit what follows.  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers & headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

  Kind regards

  DP - K

• HP Pavilion: password administrator or Power ON password

  I have HP Pavilion, when I turned it on it's request administrator or Power ON password password. I tried three times to enter the password, I got a password not valid message 71207839. Can you please help me solve this problem

  Mohsin

  Try the Health Department.

  64165219

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If requested the CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Pavilion Elite HPE: Power on password

  I powered up the computer after 4 years of non-use and do not know what the power u [password is? I can reset the motherboard some how? Help, please. I can't find a connecting cable

  You are the very welcome.

  In order to clear the BIOS P/W, please refer to the link below, last position on the page...

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-desktop-PC-series/5035344/model/5036175/document/c02668523/

• Pavilion Touchsmart 23: Pavilion 23 Touchsmart screen dim after sleep Windows 10

  Pavilion Touchsmart 23 all-in-One model f339

  AMD Radeon HD D 8670

  My screen is too dark, after that the computer "wakes up" fashion "sleep" I can read only now my face one inch away. Reboot brings the brightness back to normal, only to happen again the next time that the computer sleeps. This has only started happening since the upgrade of Windows 8 to 10 of Windows.

  -All drivers are up-to-date

  -All Windows updates are up-to-date

  -There is no brightness slider in power options

  -I have no brightness control on my keyboard

  Please help me solve this problem, so I don't have to go back to Windows 8! Thank you in advance.

  I think I might have made some progress with this problem. I had a friend call me and he suffered from these same questions. The partial solution (and probably most) I've discovered is that there is a critical update of the BIOS that had not been done. Because Windows 10 was already installed, it didn't appear on the page to Support HP or HP update software. The way I had the time it was to say the HP website that I had Windows 8.1. The update then appeared. I downloaded the BIOS for its model was last updated and installed. (BTW: it worked great in Windows 10). Once I've upgraded, the dark screen problem has been resolved. However, as long as the screen saver, night light or auto Hibernate still does not work. You can manually put the computer to sleep via a button or the start menu, and he returned very well. His was an AMD based all-in-one and I don't remember not if someone had problems with the Intel based platforms.

  So, to summarize... If you have not installed 10 still make sure you BIOS update first. If you have goto, the Web site and enter your model. Replace the Windows 8.1 operating system. Download and install.

  If anyone has more of an insight, please answer others to take advantage. Good luck and enjoy Windows 10. And if anyone has a solution for the problem of sleep/sleep/screensaver please respond.

• HP Pavilion p6-2069sc: computer hangs during the HP splash screen

  Hello.

  I plug an ASUS GeForce GTX STRIX 750Ti to use in my Pavilion P6 - 2069sc, but when I start the computer after installing my GPU, the screen hangs on the blue HP startup screen.

  When I try to hit the ESC key to enter the BIOS or any other keys it comes just a beep of the machine.

  It is a long beep every 20 seconds or so from the computer.

  When I use the integrated graphics card, everything works as they should.

  I already upgraded to 550W 300W POWER supply

  Because your computer has been manufacturer Sept 2011, there Legacy BIOS.  The latest vBIOS UEFI was initiated at the HP units at end of 2012.  That said, either you stay with a Legacy BIOS GPU card, or choose a dual hybrid card BIOS.  The GTX 660, or GTX 670, all of which are two high-end of the legacy card would be far superior to the GTX 750Ti.   All the current hype is looking for a lower quality card, the 750Ti, based on the more low power and some GTX offering a BIOS hybrid via Select manufacturer. The Asus could not be hybrids, as you can testify.

  http://www.hwcompare.com/17301/GeForce-GTX-660-vs-GeForce-GTX-750-TI/ 450W SS6

  http://www.hwcompare.com/17306/GeForce-GTX-750-TI-vs-GeForce-GTX-670/ 550W PSU

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-GTX-660/specifications

  Based on your existing new POWER Pack, (hopefully a quality unit), 660 GTX would be good.  In my humble OPINION, an EVGA GTX 660 is better based on your power supply of the system. Please call EVGA for re - check a Legacy BIOS.

  PS I have a EVGA GTX 660 and 670 in my BIOS Legacy of <>towers.  I tried an ASUS, but he did not have an ASUS motherboard. Strange, but ASUS check the fault has his own card. Cost me $50 return shipping cost, so Please check with any manufcacturer.

• Why my hp Pavilion making a great noise as the hard drive is the race?

  HP Pavilion a6430f

  Windows Vista Home Edition

  32 bit

  no error msg

  no change

  jguevarajr,

  Hard drives spin at a constant SPEED. Allows to study the fans:

  http://support.HP.com/us-en/document/c01474069

  How to clean the dust: http://support.hp.com/us-en/document/bph07153

  What Miss me is the instructions on cleaning the front end, so I've included the upgrade/REPAIR: http://h10032.www1.hp.com/ctg/Manual/c00841410.pdf

  See the excerpts 1-5 to remove the side panel and the front panel. Clean the cover (front and back) and the low forehead, area F on pg7. The front panel has usually a grid or slots at the bottom. It's the front air intake. Imagine all the unwanted blocked upward, you will find.

  For the air flow, never place the unit on a mat. If a floor, I found that place it on a 4 "top box will increase air. Make sure that the front panel extends beyond the edge of the box.