PC HP Pavilion HPE-210y "mystery card".

Similar Questions

• Pavilion Elite m9077c mystery card mother front USB 2 cable location

  After replacing a defective on my Pavilion Elite m9077c PSU, I have a white cable not identified from the slot to USB before IPIBL - motherboard ASUS 2 which ends with a mount of squeeze and I think it is a connector type B four-pin USB. Please tell me what it could be.

  Looks like you have disconnected a little more that you should have. This connector must be the memory card reader on your box to the motherboard USB header.

• Replacement for HPE-210y graphics card

  Hello

  I posted a question earlier about a possible replacement for a card mother 'death', but it turns out that the motherboard works fine.  Good thing I had checked it by another technician, and it turns out that the problem is the dedicated Radeon HD5450 card.  Now I use my computer via the integrated graphics card.

  I searched the Forum but can't find anything specific on the model of my computer.  I don't plan to upgrade the power supply at the present time (300w).  My question is, what is a better alternative for the Radeon HD5450 without upgrading PSU?  In addition, the included graphics card is 512 MB.  Can I use the HD5450 1 GB?  Any brand will be allowed until the GPU is the HD5450?

  Sorry, I'm a little rusty on this thing so I ask your indulgence.

  Thanks in advance.

  I want to just update just in case anyone else needs help.

  Went to BestBuy and scout autour for graphics card.  I saw a VisionTek Radeon HD 5670 with 2 GB of DDR3 memory and check his power.  He said the area "300 Watt or higher recommended power" so I picked up and tried to install it on my machine.  Now my PC runs great!  My performance index Windows have increased from 5.0 to 5.9.  My old WEI is based on the rating that was the lowest graphics.  Now, it is based on the main hard drive. The rated current graphics and graphical games of my system is two 6,7.  So, I guess they will do for most games.

  Hope this helps others who face the same problem I did.  I just hope that the power supply is really enough.

• Pavilion hpe-210y: used in my music folder space

  What should I do to check the space I use in my music folder?

  You can right click on the music folder and choose "Properties".  This will give you the information you want.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• The upgrade of the video for my desktop HP Pavilion Elite HPE-210y PC

  Yes, I have two questions about my PC.

  First, on the technical card for desktop HP Pavilion Elite HPE-210y PC, it shows a power 300 watt yet looking at the minimum requirments for the video card from the factory it require a 400 Watt power supply and the fact of the data sheet does not show the power suppy manufacturer he was wondering has.

  Second, I'm looking to upgrade the video card and I was wondering what the card would be a good replacement for a game without having to replace the power supply but if I have to adapt what power? (With a ceiling of $ 200 - $350 on power supply)

  SCLAW wrote...

  First, on the technical card for desktop HP Pavilion Elite HPE-210y PC, it shows a power 300 watt yet looking at the minimum requirments for the video card from the factory it require a 400 Watt power supply and the fact of the data sheet does not show the power suppy manufacturer he was wondering has.

  Yes, the power is 300 watts. Minimum 400 watts are for full power to retail graphics cards. The map provided by HP was custom designed to meet the requirements of power weaker and is is not the same as a retail card. HP has traditionally used Bestec and Lite-on original UPE.

  SCLAW wrote...

  Second, I'm looking to upgrade the video card and I was wondering what the card would be a good replacement for a game without having to replace the power supply but if I have to adapt what power? (With a ceiling of $ 200 - $350 on power supply)

  To install a gaming grade graphics card, you will need to replace your power supply. The Corsair CX500 and CX600 are highly recommend and forum favorite. Further, these power supplies are only slightly larger than a block of power SUPPLY HP stock and are known to adapt. Power supply Idleness will put you back on the $50 - $75. For useful information on the selection of a graphics card that fits your needs, read Guide of Big_Dave of a discrete video card selection .

  Frank

• Pavilion HPE H9-1130: install the firewire card correctly into the slot of the motherboard correctly

  Hello, for my HP Pavilion HPE H9 1130, how to install the correct firewire in the motherboard slot card OK in OS Windows 10 x 64 / x 64 processor? And what video software system can I download to recognize my Panasonic 100a camera AX?

  Thank you. Followed your instructions. And it worked perfectly. Thank you. Even if I have Adobe Prem Pro, I downloaded MS Director and put 9 drivers after installing the PCIe card. Then it worked perfectly to capture video from a FireWire camera. Thank you once again!

• HP Pavilion HPE h8-1111: Deffective WLAN Card

  I've had a few confusing issues with my internet connection for a few weeks now:

  My computer seems to detect wifi networks (they appear in the Network Manager), but fails to connect because of an unknown factor.

  Basic troubleshooting informed me that wifi wasn't the issue (other devices could connect to) and it turns out that my computer could sometimes reconnect by mmee after a few hours (weird right?)

  This time it does not resolve itself. I tried to update my WLAN card through my laptop adapter, so the drivers via a USB key. Nothing worked (maybe bad drivers?) I've tried a few)

  My network card is a mini Broadcom 802.11n using magnetic antennas of the card. (youd cloth found in a laptop essentially...) I have little or no knowledge more than I could translate from the web on this kind of hard\software. I am at a loss.

  [Also, I've seen a few threads recommending the driver intel update of software, but it needs a connection to work its magic...]

  Hi @arnaud34,
  
  Welcome to the Forums of HP Support! I understand that you have problems with your wireless connection and I'm happy to help you.

  Is that something WLAN adapter that you added or the original map?

  The Support page and drivers for your computer model: PC desktop HP Pavilion HPE h8-1111

  I would recommend that you try the following to see if you can get a stable connection. If at the end you still have nothing so it may be that the card is bad, and a replacement is necessary.

  Troubleshooting your wireless network and Internet access (Windows 7)
  
  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.
  
  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Pavilion Elite HPE (HPE-210y): Travel in RAID 0

  Hi all.

  Recently, I upgraded my hard drive of 1 TB to 2 TB. I bought two hard drives of 2 TB because I planned to run RAID 1, but after that I cloned one of the 2 TB drives and removed the old 1 TB, I decided to save in a different way.   I have most of the things I wanted to back upward again on the old hard drive and another method seemed to be a better route. My uses of son for a little game and RAID 1 seemed to be struggling against productive and not as safe.

  So, I'll be able to move my new drive 2 TB in RAID 0 with my other new 2 TB drive even if I use one right now?

  Else consider this computer Noob?

  Once more, I find myself at the mercy of the much more educated HP Forum members lol.

  Here are my computer specs:

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-200-desktop-PC-series/4160010/model/416001...

  Hard drive is the same, but upgraded to 2 TB

  Pavilion Elite HPE (HPE-210y), AMD Phenom II x 4 3.0 GHz, 4 X 2 8 GB RAM, GeForce graphics 970, win 10

  Hello

  HP's instructions for configuring RAID using the AMD RAIDXpert. Read at least twice.

  Check your BIOS settings and make sure that the SATA is set to RAID.

  I suggest you connect hard drives to ports SATA 1 and 2 (blue and white). Among the old HP AMD motherboards we're picky about which ports SATA would be supported RAID.

  

  BTW - RAID 1 is much more secure that it will provide redundancy in the event of a hard drive failure and RAID 0 won't.

• HP Pavilion HPE h8 - 1213c: black screen of death because of the new graphics card (EVGA geforce gtx 960)

  I just bought a new card (EVGA geforce gtx 960) to kick some butt. But during installation, it seems to be held on a black screen of death? Not the most fun to see... in any case, I had asked the store clerk if it would work and he said to, but it doesn't seem like it does... Is there a new BIOS I should download or something? Any help would be nice...:.

  My computer is a HP Pavilion HPE h8 - 1213c

  The graphics card is an EVGA geforce gtx 960

  If you have both. You can use one or. PIN 8 can be used as a 6 pin as well.

  http://www.EVGA.com/products/ProductList.aspx?type=0 & Family = GeForce + 900 + Series + Family & Chipset = GTX + 960

  2 smaller cards use a single PIN 6. The rest use a single 8 pin.

• Pavilion HPE H8-1121: Pavilion HPE H8-1121 - new graphics card + power supply does not start after screen HP (Revisited)

  I have the same problem as this post 2013!  Ouch. Pavilion HPE H8-1121 - new map chart + power supply, does not start after HP screen.

  I installed a new power supply (Seasonic 620W), which works well.  I also installed a GTX 660Ti last year and it was works fine as well.  I recently bought a ZOTAC GTX 970 and attempted to install it, but it will not go beyond the blue HP screen and I get the same code of beeps (1 long, 3 short), who, seems, suggests that the video is not initialized.

  My BIOS date is 2011.

  Where can I find an update for this?

  I'm also using Windows 10, which I found on the HP site is not tested on my model and would probably not favourable to good use.  Should I do back up to 7 or 8?  and then update the BIOS?  Y at - it a update for my BIOS and where can I find.

  In any case, I hope that this is a solution.  Again, this is not a bad machine to be 5 years old.

  Thanks for any help!

  If the video card that you have purchased dose not a legacy vBIOS it will never start. An update of the BIOS doesn't solve that.

  It is likely that your new video card has a vBIOS UEFI and that only is for the PC motherboards newer than yours which have a UEFI BIOS. Your motherboard has a legacy BIOS. 2012 is the year of model when the UEFI BIOS more or less became the de facto on motherboards standard.

  I return it for a refund. Find the candidate of video cards that support the old BIOS. It can be inherited only or switchable vBIOS (legacy or UEFI) vBIOS.  I suggest looking at the site of Sapphire Technology. ZoTac is not known to provide enough information about their video cards in the way. You upgrade a pre-built desktop PC and it's different and a little more difficult to set up a DIY PC. I looked at the site of Zotac and see that nothing is said about their video vBIOS cards.  I would return to the map.  Carefully read the specifications of the video card. A candidate for your motherboard card must have inherited vBIOS support or simply, it won't work.

  ZOTAC (they don't say anything about their product vBIOS)

  https://www.ZOTAC.com/us/product/graphics_card/GTX-970-amp-extreme-core

  Sapphire Technology

  http://www.sapphiretech.com/catapage_pd.asp?cataid=305&lang=eng

  Because you look at game with 4 GB cards. Take a look at the following map. It has a double vBIOS. legacy and UEFI. http://www.sapphiretech.com/productdetial.asp?pid=640A98CD-0CF0-4191-B75C-CA2800111ADB&lang=eng

  

• updated block FOOD & card video on Pavilion HPE h8 - 1070t

  I have studied various posts on this topic, but it could still use a recommendation please.   I want to improve my video card to a Radeon HD 7870 (first choice) or Radeon HD 7850 (second choice).  They all need two 500 watt supply.  I have a HP 460 watt stock in there.  I think to upgrade the PSU power SUPPLY Corsair CX600 or TX650 and wanted to check first.  My system:

  HP Pavilion HPE h8 - 1070t (2600 i7 quad-core)

  2 hard drives

  1 Blu - Ray combo player

  Windows 7 Pro 64-bit

  Those are good pirates for my model and if so should I "V2" version of them?

  Thank you!

  Both the CX600 V2 Corsair and the Corsair TX650 V2 are power supplies, but because of the narrowness of the HP case and the little space between the power and CD/DVD/BluRay drives... I recommend that you install the slightly smaller CX600.

• Pavilion HPE h8 - 1380t: video card upgrade for Pavilion HPE h8 - 1380t

  Hi all

  I recently bought a map GTX1060 (from a MSI GeForce GT640) 4 year old GPU from nVidia in line in order to improve the capacity of my machine so that I would be able to play Fallout 4 and 3 Witcher (both put my poor old GT640 kneeling - even on lower resolution settings).  It is part of the case and the powers that be (Yes, I plug in the connector 6-pin PSU) and 600W POWER supply is adequate for the task, but I'm starting to think that I probably have a motherboard compatibility issue.

  When I install the card and turn on the PC, it hangs at the splash screen of installation (a common problem from what I've already read on these forums) and that it goes no further (keyboard and mouse do not respond at this time here).  I contacted the nVidia support, and they suggested some changes to the BIOS (disable Secure Boot, activate the Legacy/MSC Mode and switching between legacy and UEFI BIOS selection Mode), but when I access the HP configuration utility (F10 on boot to top with GT640 card installed), these options are not put at my disposal.

  Is it possible for me to access the BIOS settings that nVidia has indicated I should be adjusted?

  This GPU card simply is not at all compatible with my motherboard?

  System Specs:

  HP model number: B4J28AV #ABA (Pavilion HPE h8 - 1380t)

  Motherboard: Pegatron 2ACE(Socket 0); 1.08; Intel Sandy Bridge-E Rev. 07; Intel Southbridge X 79 Rev 05

  BIOS: FRIEND 7.15

  CPU: Intel Core i7 3930 K (3.2 GHz)

  OS: Windows 7 Professional 64-bit, SP1

  Current GPU: MSI GeForce GT640; Driver 10.18.13.6881

  If the GTX1060 is not compatible, which is the highest card GPU nVidia performance that can be used with this motherboard (given the limitation of power supply 600W)?

  Is there another motherboard for this machine which would be compatible with my existing CPU and the GTX1060?

  Thanks for your help...

  Hello

  The h8 1380t has a Pegatron motherboard 'Pittsburgh '.

  You could try to find a future revision of this motherboard. I'm also a 810-150se with a map of the 'Pittsburgh2' system that has UEFI. I use a card Nvidia GTX EVGA FTW 970 with excellent results.

  You will need to check that the Review Board would fit in your frame.

  The other options are:

  1.new want to expedition with Win 7 Pro, or

  2 falcon Northwest.

  In a map of the main current system the permutation of Asus, Gigabyte or Asrock is difficult at best. You have to change other components such as the processor, heat sink, fan and the memory. You can probably buy an OEM of Windows 7 Pro version.

  It becomes quite expensive when you do the math on all of the changes you will have to do. There is no guarantee that you can find a map of the main current system having the correct spacers for your chassis h8 - 1380t.

  Avoid a Skylake processor if you can unless you don't mind jumping through a few extra hoops to install Win 7.

  Please consult this article and go here for the workaround resolved the problem installing win 7.

  Jay

• HP Pavilion HPE: Ability to upgrade the video card

  Hi I have a desktop HP Pavilion HPE h8-1100 AMD Angelica with a 300w power supply. The current map graphic is a Radeon HD 6450.  I want to upgrade to the best game card that my pc will support.  Any help and options would be greatly appreciated. Thank you much Happy New Year!

  Hello

  Looking for an opportunity 660TI GTX.  A CX600 Corsair or CS650m would be a good choice for a power supply.

• Pavilion HPE 440F: need new video card for HPE-440F

  Salvation;

  The ATI Radeon HD 5570 in my Pavilion HPE 440F appears to be dead, or is doing. The fan has stopped working and I think the map has overheated.

  I'm running Windows 7 x 64.

  Anyway - I would like to install a new card - and best video. It is, since it is HP, I bet that not all cards are compatible with my system.

  For example, I can buy an ATI Radeon SR-290, which gets much higher than my current card pass mark. Or maybe even a NVidia card might be a better value for the money.

  Can someone point me to a list of compatible video cards for my system?

  Thank you

  Ubuntu_Kid

  p.s. My Linux box is not an HP.

  Ubuntu_Kid, welcome to the forum.

  The problem you are having is, most of the newer video cards require UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Your computer was released on August 26, 2010.

  Some of the manufacturers have developed a VBIOS that will allow their cards to work with legacy BIOS.  I know that the EVGA has done with some of their cards.  I suggest to call their Tech Support (1888-880-3842) to see if they have a card that will work with your computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP pavilian hpe h8-1205: my gforce 740 graphics card does not work in my HP Pavilion HPE h8-1205

  My 740 gforce graphics card does not work in my HP Pavilion HPE h8-1205, please help

  Supaman4040, welcome to the forum.

  I think that your problem is related to the BIOS.  The 700 series video cards require UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI in its motherboards up to mid-October 2012.  Your computer was released January 25, 2012.  You must contact the card manufacturer to see if they have a VBIOS update which will allow the card to work with your computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.