PC needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I
Upgrading to windows 7 8. PC worked fine for 3 months. The last time I turned on the computer would not start.
Tony Hey,
Regrettable that the problem exists.
Seems like a problem in the BIOS settings, it would be good to check with the manufacturer of the PC.
They might have more insight on this.
Tags: Windows
Similar Questions
-
I tried to install Windows 8 on my PC that was dual-boot WIndows 7 from 2 different hard disks and would choose between the 2 at the start. So I deleted the partition of a Windows installation and installed Windows 8. Everything seemed to work fine, I could start and choose between Windows 8 or 7 and both worked well. Then, I updated a graphics driver Win 8 and caused problems with Win starting 8 by a black screen and nothing else. There is no restore point so I decided to start by deleting the partition. I have re installed Windows 8, but now when I boot I get an error screen.
"Recovery".Your PC needs to be repairedFile: \Windows\system32\winload.exeError code: 0xc000000eYou will need to use the tools of recovery on your installation media, etc...Press Enter to try againPress F8 for startup parametersPress F9 to use another operating system.It allows me to boot from another HD after pressing F9 several times.Any advice would be appreciated.Kind regardsAnthonyI had exactly this problem with a Windows 8 machine with a hard drive only a couple of weeks might not start on Windows or Windows CD but was able to start USB recovery and follow the steps below.
Start the computer with the recovery media inserted. The computer must load the CD or USB. (You may need to change the BIOS boot sequence to start the USB drive first).Choose your language. Click next
You will now see install in the center of your screen. On the lower left side you can see fix your computer.
Choose repair.You will have several options, including:
Refresh your computer
Restore your computer
Advanced optionsChoose Advanced Options.
Launch the command prompt
Enter the following commands one at a time who hit enter after each command.
Bootrec /scanos
Bootrec /rebuildbcd
Bootrec /fixmbr
Bootrec /fixboot
Restart the computer once the last command finished -
I get a message from Windows Boot Manager as follows: could not start Windows. A recent hardware or software change might be the cause. To solve the problem: 1. you insert the Windows installation disc, and then restart your computer. 2. choose your language settings, and then click "next". 3. click on "Repair your computer." If you do not have this disc, contact you system administrator or computer manufacturer for assistance. File: \Windows\system32\winload.exe status: OxcOOOOOOf Info: the selected entry could not be loaded because the application is missing or damaged.
I have the drive, it won't start him. I got the diagnostic tool memory to run.
What should I do?
See the Divine Logix post on this thread if it helps:
Winload.exe is missing or damaged (no it isn't!)
http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/c99dc573-6842-4E28-8ec0-a63c61495308/ -
Original title: Windows Vista upgrade to Windows boot disk boot manager is located in the computer but will not start up installation disc
Im getting the message of File:\windows\system32\winload.exe
Hi WillieGuyton,
(1) since when are you facing this problem?
(2) remember to make changes?
(3) what is the complete error message you receive?
(4) what is the number of brand and model of your computer?
Method 1:
Step 1:
disconnect any external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then get any drivers\software update for the device.
Step 2: Follow the steps mentioned in the link below to access pre - install the system recovery tools.
How to access the System Recovery Options menu?
Run the tool to restart system as shown in the link below
How to use Startup Repair?
Method 2:Step 1:
Set the first boot device in the DVD in BIOS to boot from the Windows Installation DVD. To do this, see the documentation that came with the computer.Important: Change BIOS (Basic input output system) /semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
Step 2: Follow the steps mentioned in the article below for the restoration of the Boot Configuration database (BCD) store
Windows no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration
-
I deleted the contents of partition D on my friends family vista premium, now it will not boot from the disk of the plant, he said that the file:\Windows\system32\winLoad.exe is missing with status 0xc000000f were if I can get this file or is there anything I can do to get the content from the back of the drive D : or just that he can start up without this partition D
Hello
the D: Recovery partiton was photographed by the manufacturer during production
Once deleted it
you are not supposed to ever altering this partiton
as you have problems with the process of recovery of manufacturers, contact the manufacturer
It's their recovery process not microsofts
-
lack file \windows\system32\winload.exe
try to find a missing file, so I can start my computer, the file is \windows\system32\winload.exe
original title: I need to know about a lack of file how do I start my PC it is \windows\system32\winload.exe how to do this when my computer starts
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
Vista does not load says lack file \windows\system32\winload.exe
Cannot load disk file mussing vista... told me to contact microsoft for a download of my missimg file. HOW?
Hello
1. Once you get the error message?
2 did you last modified the software on the computer recently?
Method 1:
Step 1:
I suggest try to start your computer in safe mode and check.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2:
If you are able to get into safe mode, then I suggest you perform a system restore to the date when the computer was working fine and check.
What is system restore?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
If you are not able to start the computer in safe mode, and then follow the steps mentioned below:
Method 2:
I suggest you to go through the steps one at a time and check.
What are the system recovery options in Windows Vista?
If you are still not able to solve the problem, then I suggest you to follow the steps mentioned in the link and check.
Method 3:
How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows
-
Windows 7 winload.exe error 0 x 0000428
I installed vista and seven in dual boot. I installed vista with seven being previously. Bootmgr is missing, so I've used visual BCD to fix and then windows 7 has disappeared from the start screen. I used Easy BCD to create a new entry for in the splash screen using the player in which he has been installed. Now, when I tried to get I get the following error.
Due to some recent hardware change blah blah blah...
File:\Windows\System32\winload.exe
Status: 0xc0000428
Info: Windows cannot verify the digital signature for this file.
They say to use F8, but pressing F8 I get the same screen. I can only access seven when I have a dvd bootable seven in my dvd player. And then, I installed seven but the same problem is still there. I tried to use the fix in seven dvd but it said it had fixed a few problems and then restarted without any solution. What should I do?
Give me a detailed but easy tracking solution to...
Hello
This problem may occur if the bootstrapper does not find Windows 7 boot sector or boot file.
Follow these steps:
In Vista, open an elevated command prompt, Type (or copy and paste these if you wish).
CD /d f:\windows\system32
then press enter
BCDboot f:\windows /s c:
and then press ENTER.
Close command prompt.
Restart the pc.
See this link - http://www.sevenforums.com/installation-setup/30572-problem-dualboot-vista-7-winload-exe-error-2.html
-
help \Windows\system32\winload.exe file is missing or damaged
Windows does not start, the computer will not load or meet recovery disk, HOW or WHAT DO I NEED TO DO TO FIX PROBLEM
\Windows\system32\winload.exe SAY FILE IS MISSING OR DAMAGED.
Hello
1. what operating system do you use?
2 did you change on your computer?
Method 1:
I suggest you to follow the links and check out them.
Startup Repair
http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
Startup Repair: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions
Method 2:
How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows
-
Original title: computer Reset laptop to factory settings
I am getting error 0 xC0000001 missing file:\windows\system32\winload.efi and I have not a disk how can I fix this help please me
Most of the new machines come with a recovery partition, allowing you to return your purchase, you will need to check your user guides (or the manufacturer's Web Site) for instructions. Choose this path requires you to save all the data first.
These options are also integrated to Windows 8.
How to restore, refresh or reset your PC
http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC -
File:\windows\system32\ntoskrnl.exe
I need serious help!
Some wonder how I deleted some system 32 - files
Anyway now I can not connect my computer backinto.
I am running Vista Business as my OS
At startup, I wonder to insert my disck installation and restart - does not work - also tried repair - same result
The error:
File:\windows\system32\ntoskrnl.exe
Status: 0xc0000428
Info: Windows cannot verify the digital signature for this file
Please can someone help?
Thank you
Albert
Heya,
Here are some links that may help solve the problem. -
file:\Windows\system32\winload error code. EFI: 0 xC0000001
Original title:
I continue to have problems you are trying to reset my computer.
I continue to veto when I try to reset my computer configuration:
"Recovery".
your PC needs to be repaired
the application or the operating system could not be loaded because a required file is missing or contains errors.
file:\Windows\system32\winload. BF.
error code: 0-xC0000001
you will need to use the tools of recovery on your installation media. "If you don't have any facility (such as a disc or USB device) support, contact your system administrator or the manufacturing of PC.
How can I solve this problem and put my computer back to factory settings?
Hi Suzette.
Sorry for the delay in responding.
You can contact the support of computer manufacturer for additional assistance related to the factory reset.
Lenovo's community: http://forums.lenovo.com/
Lenovo Support: http://support.lenovo.com/en_IN/feedback/contactsupport.page?
Thank you.
-
So, today, for Christmas, I got a laptop Asus R503U series. I played a little bit about it for a while (all in the same day) and towards the end, a pop window up told me that windows live was insensitive and I had the possibility to close or wait until after I hit wait three or four times I finnaly hurry then close my phone froze so I restarted and when it shows is I was instantly to a screen that says : Recovery of that your PC needs to be repaired. The application or the operating system could not be located because a required file is missing or contains errors. file: \Windows\system32\winload.efi. you will need to use tolls to recovery on your installation media. If you do not have any installation media to contact your system administrator or the computer manufacturer. I bought this laptop from a Pawn shop with just the phone and any other case it came pre installed with windows 8, it's even a sticker on the bottom. I really need help! The cheapest way to please and thanks a lot!
Thank you so much you pretty much confirmed what I thought it was true. I have a windows desktop computer which is able to create a recovery Flash disk, but the size is 16 GB, disappointment, enough with what you just explained?
-
I have a HP Pavilion dv6500 Laptop, I'm trying to restore my system, but the system wants to use a Windows Setup from disk because my windows/system32/winload.exe could not be loaded"status: 0xc000000f Info: the selected entry could not be loaded because the application is missing or damaged. »
The windows installation is located in the machine, and apparently the recovery has not copied as part of the recovery disk. I tried to identify if a recvery kit was available and it seems that maybe not. What must I do to fix this?
Have you tried to type the F11 key immediately after switching on the laptop. This should start in the hard disk partition recovery.
You should be able to order by phone recovery disks. If you are USA / Ca... 1-800-474-6836
-
Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot. I get the message "cannot start Windows. A recent hardware or software change might be the cause. File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged. I DO NOT have the Windows Setup disc.
Hello
I suggest you borrow the CD of windows vista to your friends
Method 1:
Step 1:
I suggest you check in safe mode.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2:
If you be able to start your computer in safe mode, I'd say make clean boot and check.
Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
I also suggest you to see link and check.
Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates
Maybe you are looking for
-
I have a macbook pro 2012 environment, and it has a weird start command. There the carillon, and then the apple logo, but after about 2 seconds, it goes to the login page. I connection, and then click the progress bar appears and starts when the comp
-
X 200 supports 8 GB of memory?
Hello Had the chance to get 2 x 4 GB at a good price. Is someone can you please tell me if X 200 can handle 8 GB of memory? My x 200 has Vista 64 bit installed. Please advise, thank you LD
-
Satellite A30 Wireless LAN does not
Im not sure how long my wireless LAN is not working, it may be something to do with the SP2 download. I lit but no flashing light. Here is the system of information on the PCI card. Have no idea about computers can someone help? Andy Name [00000002]
-
HP Envy: Envy fact HP 17 expandable t
I was wondering if my ho envy 17 "touchscreen phone has been upgraded with the graphics card. My laptop model is the m7-n109dxPlease help me, and if it is not able to update anything in the laptop is extensible
-
Hello I just launched WLCCA against a WLC 8.0.121.0 running I have the following errors: 30037,General: Non default RRM timer in use. This is not recommended unless directed by Cisco support. Coverage Hole Interval 11a:90 30037,General: Non default R