PC runs, but does not start. Monitor, keyboard and mouse with no signal.

Similar Questions

• Pavilion 15 - p002nia: HP Pavilion 15 - p002nia fan runs but does not start

  My 2 year old son poured drink chocolate on the keyboard of my laptop 15 - HP Pavilion p002nia recently bought. When I found out, the laptop had stop, all efforts to start failed. White LED light on the button walk / stop would stay and fan would run for 30 seconds, stops, starts and stops continuously. The system does not start. What can I do? The jury is dead?

  Hi TheOldMan, thanks for your response. But, someone suggested I have dismantle the system, clean with alcohol and dry that it might help the dos system.

• external monitor, keyboard and mouse with my Pavilion dv 6500

  I want to use an external monitor, mouse and keyboard with my pavilion dv 6500. I would like to close the lid on the dv6500 in order to save space, while using my external screen and keyboard mouse. Is this possible?

  Hey Radar.

  This is possible. That depends on what operating system you're nuer, but Windows 7 is in the power options menu. Here is a link that will guide you in the steps under Windows 7: How to operate the computer laptop screen while closed

  I hope this helps!
  Sean

• I have a new computer running windows but 10, 13 photoshop elements disc.  Insert the disc does not start something going and looking at the files I do not see an installation executable.

  I have a new computer running windows but 10, 13 photoshop elements disc.  Insert the disc does not start something going and looking at the files I do not see an installation executable.  I don't know what to do.

  Download from Download Photoshop Elements | 14, 13, 12, 11, 10

  Install and enter your serial number.

• Put 8g memory in es1-512 but does not start. Had to put 4g in. Does anyone else have this problem?

  Put 8g memory in ES1-512 but does not start. Card say that it will accept up to 8 GB. He went out, re he sat several times without success. Does anyone else have this problem? Thanks in advance.

  Hello

  Here's the original memory stick for Aspire ES1-512:

  KN.8GB07.013

  SODIMM.8GB.DDR3L - 1600.KINGSTON

  OR

  Compatible memory: Kingston

• Use the keyboard and mouse with xbox 360

  original title: xbox 360

  is it possible to use a keyboard and mouse with an xbox 360 or play them on pc?

  Hi specter1,

  You can use a keyboard and mouse on your Xbox 360. Here's how: http://www.ehow.com/how_6098963_use-keyboard-mouse-xbox-360.html

  teengeek.freehostingcloud.com

• MacBook Pro-life extendable start-up chime, but does not start

  I have a start 2011 15 "MBPro8, 2

  Quad Core Intel Core i7

  2.30 GHz

  Boot ROM version: MBP81.88Z.0047.B2A.1506082204

  Intel HD Graphics 3000 VRAM:512 MB

  AMD Radeon HD 6750M VRAM:1 GB

  8 GB of RAM 1333 MHz DIMM0

  It will not start.  Trying to start the machine, it enters a loop-

  1. startup chime

  2. grey screen with Apple

  3. the small wheel starts to turn under the Apple

  4. the screen goes black

  ... and the cycle starts over.

  The computer does not start in Mode safe.  In an attempt to safe mode the loop above has the addition:

  3. a progress bar is displayed but does not progress.

  I have reset the PRAM

  It will start up in target Mode, so I was able to recover data

  In target Mode, I was able to run first aid utility on the drive.  This has not fixed the problem.

  I can hold down the Option key and see Macintosh HD and the recovery Partition.  If I try to boot from the recovery partition, I get the same loop.

  I can start in the Test of online material, which revealed no material problems

  I can boot in Verbose mode and it always happens in the same place

  Execution fsck_hfs (version 226.1.1 of hfs)

  BootCacheControl: cannot open /var/db/BootCache.playlist: 2 no such file or directory

  ' ' It would be possible for me to insert the "var/db/BootCache.playlist" file using target disk mode?

  Other thoughts?

  Have you tried resetting the SMC?

  Reset the management system (SCM) controller on your Mac - Apple Support

• Recovery partition is there but does not start Recovery

  Hello
  
  When you try to restore the image (F11 at startup), the laptop seems to be as he tries to start missing Windows installation (Windows Boot Manager error page).
  
  Partitions 'SYSTEM', 'HP_RECOVERY' and 'HP_TOOLS' have not been affected. Recovery files of ~ 15 GB are still there!
  
  The Windows (2nd primary) partition was deleted and then recreated as an NTFS partition. Since then, the recovery process does not start.

  How can I restore my intact HP_RECOVERY partition system without using recovery DVD? (I can't access right now.)
  
  The partition Windows has need of a specific disk label? What is the magic that breaks the recovery when an NTFS partition is all simply deleted and then re-created?
  
  Peter

  HP ProBook 6550 b (WD701EA #ABD)

  Solution: How to fix F11 penetrates is not in the Recovery Manager process

  You will need:

  -This fix by HP: difficulty to the Multi-partition HP Recovery Manager (the ProBook 6550 b is not listed as a supported model, but it worked for me)

  -installation of Windows (see partial solution above) a job to install the fix on your ProBook

  or

  -sufficient knowledge to extract the winre.wim missing the fix above, copy it to your recovery partition and to apply any measures necessary (I did this)

  Steps to follow:

  -in your work on your ProBook Windows installation open the file downloaded "sp48415.exe".

  -the files will be extracted in "C:\swsetup\SP48415", open this folder in Explorer

  -Right click on "F11SPFix.cmd" and run as administrator

  -the patch will be applied

  Restart und press F11 at startup to enter your recovery Manager (hopefully) fixed.

  Credits to HP support.

• Satellite A300 - rotates but does not start

  Hello

  I have a Satellite A300. I had several probems for the boot since 2 months ago: when I want to turn on my laptop, it turns on but the screen keeps black and it does not load the screen "Toshiba Leading Innovation". 'Satellite' (to the left of the mouse) light is on (it would go only about a second then to start and then turn off) and it will turn off.

  I try again for so many times with all the possibilities: without battery, only with the power adapter, two, but it does not start. I don't know what I can do. I always Hibernate my laptop because I'm afraid of can not start it the next day.

  Could you help me? If she cares: I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.

  Thank you very much and sorry for my English written: S

  Diego

  Hey Buddy,

  > I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.
  Of course, it s always advisable using Toshiba original spare parts only, but if you notice the same problem with AC adapter only it s not related to the new battery.

  Just to make a better diagnosis: If you have connected an external monitor? The internal display is perhaps the problem and doesn't turn on and it would be useful if you are testing the situation and an external monitor.

  But this noise as a hardware problem serious and in this case, you can wait to contact an authorized service provider. Technicians professional diagnostic tools to make an accurate diagnosis and to Exchange defective equipment parts.

• Touchsmarrt Tx2 turns on but does not start.

  The laptop turns on I hear the fan, the caps lock and a lock of numbers blink, but it does not start. I'm runnin windows 7

  Home premium. I did recent changes. Just put computer in mode 'sleep' and he won't wake up. The wireless light is orange.

  Electrical components sometimes must have all the food sources removed and reintroduced to work properly.  Try to perform a hard reset first, if this does not work then we will move on to the next step.

  To perform a hard reset

  • Shut down the computer by going to the menu start and select shut down. (If you have no display, hold the button for 5 seconds); (if the computer don't market, go to the next step)
  • Unplug the adapter from the laptop.
  • Remove the battery from the bottom of the laptop.  There will be a switch/battery eject button.
  • Wait at least 1 minute with all sources of power disconnected.
  • Reinsert the battery and reconnect the power adapter, and then try to turn on the laptop.

• 15-p151nr Pavilion: Pavilion 15-p151nr dead, power supply LED flashes 3 times but does not start

  With or without the adapter is connected to the computer (well known socket), the computer will not turn on.  The LED located on the left side of the computer where the socket is attached blinks 3 times (white), but does not supply power to the top.  Another post I saw said "continuous" flashing would be the power adapter, but wanted to ensure that it is in fact the problem before buying a new...  Any help would be great!

  Hi @joshuaj21,

  Welcome to the HP Forum!

  It's a great place to find answers and advice! You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums: first time here? Learn how to publish and more

  I understand that the computer will not turn on. However, when you connect the AC adapter of the power port light flashes 3 times.  Please check that the power cord is not one of the recall. HP laptop AC Power Cord Safety retirement program and replacement announced August 26, 2014 .  You use a power bar?  Have you tried a different outlet? Here is a link to the HP laptops - tests and using the AC adapter which can also help.

  Please let me know the results.

  Thank you! If it helps you to find a solution, please click the button "accept as Solution"down below in this message. "If you want to say 'Thank you' to my effort to help, click on the" ""Twww.Mountainview.rsb.qc.ca Up ' give me a Kudos. : catvery-happy

• The app on the market does not start, the page is white with some Blue Cross top left.

  The market does not start even on the internet.

  Hey Karin!

  I'm sorry you had to go through the frustration that you presented this nuisance. I am very pleased to hear that these steps solved your problem. =)

  Enjoy new applications you find on the market of Firefox. Here are a few suggestions that I find very useful, to help you get started:

  • Documents Viewer
  • Notes, you can synchronize with Evernote
  • PDF Viewer
  • File Manager
  • ConnectA2 to be able to chat with users of WhatsApp
  • Telegram, Open Source, cross-platform and safe customer chat
  • Dial.Radio, because all the world could use a little music on their lives

  Have a wonderful day and please feel free to post new threads in the SUMO forums, if you have other questions about your Firefox OS device.

  Thank you

  -Ralph

• Using two computers on a single monitor, keyboard and mouse.

  I want to use my two computers with a single screen, keyboard and mouse... says to use the kvm switch.  I use Windows XP on a computer and Windows Vista on the other... what kvm switch do you recommend?

  You can view the free software kvm solution below:

  Input Director
   http://www.InputDirector.com/

  I use between three computers (1-Win7 Pro x 64 single monitor, 1-WinXP Pro x 86 two monitors, 1-WinXP Home x 86 single monitor) and a single keyboard and mouse. It works fine for me, I used it for over a year without any problems. The Win7 Pro and WinXP Pro have both run several virtual machines too.

  There are several other kvm software available (Google is your friend) I tried several before input Director.

  Kind regards

• wireless keyboard and mouse with Insignia bluetooth adapter

  I have a Pavilion 23-h024 all-in-one with Windows 8.1 and trying to pair my keyboard mouse to a 4.0 Insignia bluetooth adapter and wireless. When I go to the settings of the PC and click on Bluetooth he searches for devices but does not stop and never find all of the devices. Does anyone know if I'm doing something wrong? The adapter of the Insignia would not be a updated driver for 8.1?

  Nope. The dongle and the associated keyboard and mouse are coded to work together as a set.

  It's time to pick up a bluetooth or wireless Clavier\souris combo set.

  You will be probably better to choose a wireless set.  Check out the review sites.

• An Android apps runs with Z10 and Simulator, but does not start woth Q10

  My worn for Android application works very well with Blackberry 10 Simulator, my housing on the portal is rejected but the application does not launch with Q10, works however with Z10.

  I checked my code for all uncaught operators who may cause a failure to start, but could not find.

  Do you have ideas on why an application running with Z10 or Simulator would not start with Q10?

  Thank you, imre.

  The size of the screen was really the question. I put Blackberry 720 x 720 for the emulator, the repeated problem, and I fixed it.

  It's all good now!