PC sees the network printer J4580 but not scanner

I was able to install my j4580 to network with my laptop, but it does not recognize the scanner.

Hello

The HP Officejet J4580 is a single USB printer, it does not any network fumctionality.

Let hae, the printer connected to a PC and shared through the network with another PC, MS Windows only allow printer sharing, such will not provide any functionality to scan.

Goes same for sharing a printer via a USB port of a router (aka Print Server)

Kind regards

Shlomi

Tags: HP Printers

Similar Questions

  • HP Photosmart 6510 series connects to the network and Internet, but not the computer.

    Hey all,.

    I have a desktop H8-1228 and 6510 e - printer.  I got both products at the same time.  I did the initial installation, and everything worked perfectly.  I was able to print of my HP Touchpad (the printer was on the floor and my Touchpad was down.).  Recently, I made a trip for two weeks.  I turned off the printer.  This seems to have been a mistake.  Now, he will only contact my network and Internet, but not the computer.  The Setup program keeps telling me that it is 'Impossible to find the printer' and that he wants me to check the IP address of the printer.  I did this many times by printing the HP's Configuration Page from the printer screen.  I also used Windows "Add a printer" without success.

    I have installed and uninstalled the software several times; every time that remove the icon of the printer and the Standard TCP/IP port in the "Devices and printers" section in Control Panel.  A few minutes earlier, I used Regedit to delete any reference to the series of HP Photosmart 6510 in the registry, believing that it could help my situation.  There can be no. :-(  I did the installation with the same problems that I had all the other times that I tried to install it.

    No help from you the printer experts will be greatly appreciated.  I'm not a novice as you can see.  This situation, however, launched my posterior. :-))

    Hi old_geekster,

    You may want to enable disable all startup programs in msconfig until you are able to access the Web integrated printer server. It seems that there is something in the communication with the printer's operating system blocking. It will most likely software firewall or security related.

    HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

    I would like to know what are the errors you receive?

    http://www.HP.com/go/tools

  • PSC 1350 printer works but not scanner

    Hello

    Have just upgraded to Windows 7.  I have the printer psc 1350 to work & print documents.  I can not get the computer recognized or even to recognize the scanner function.  I have the installation discs and who have tried but still no scanner function.

    Site Web of HP said that the Windows 7 software should recognize the psc1350.  It recognizes the printer function but NOT the scanner function.

    Any ideas?

    Hello

    Open the program to Scan and Fax from Windows, and then follow the steps set out below, the steps for Windows 7 are identical:

    http://support.HP.com/us-en/document/c03511920

    Kind regards

    Shlomi

  • Photosmart C4680: Photosmart C4680 on homegroup printer-considered, but not scanner

    My home network includes a Dell XPS-18 running Windows 8.1 Pro and a Toshiba Satellite running Windows 7 Home.  Our Photosmart C4680 is connected to the Toshiba by USB.  It is shared and is available on the network.  It is used by the XPS for printing and never a problem as long as the Toshiba's online.

    However, I can't find a scanner.  I used it for printing without having to install any software.  When I couldn't find as a scanner, I have installed on the XPS, the HP software suite which is available for download from the HP site, in the hope, there was a special driver for scanning, which would be added.  But that does not change.

    The Toshiba can scan from the C4680.  And I can connect to the XPS via USB and also find a scanner by, for example, opening Paint.net and go to "file |" Acquire | From a scanner or camera.  But when the printer is shared via network it is not considered a scanner on the XPS, although I can print to it.

    How can I use it as a scanner on the network?

    Hello

    MS Windows alow God a printer or files and folders, there are not any sharing scanner capabilities.

    Scanning can only be done from the PC that have plugged USB cable, to scan multiple computers, you will need a network connected device, it can be done with a USB device.

    Kind regards

    Shlomi

  • the Xerox workcentre 3550 network printer status is not available

    Having a problem with a xerox workcentre 3550 on a windows server 2008, this doen't impression and shows this error "the network printer status is not available.

    Hello

    That your computer is under domain, you must contact the TechNet forum, where we have of the support technicians who are well equipped with the knowledge on the issues of domain, do visit the link provided below.
     
    http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

  • Error 800703eb when you try to connect the network printer

    HII guys, can someone help me on this problem?

    I am trying to install the network printer. But I face the error code 800703EB and another description is cause to line 4 and 1 from vbs code tank.

    The following vbs code to connect the computer to the network printer:

    1. '
    2. ' Printers.vbs - Windows Logon Script.
    3. Set objNetwork = CreateObject
    4. objNetwork.AddWindowsPrinterConnection \\printserver\xerox2

    I am very grateful to the response of anyone on this issue, thank you very much.

    Hello

    (1) have you made changes before the start of this issue?

    (2) what is the brand and model of the printer?

    Perform a clean boot and try to connect to the printer:

    Step 1: Clean boot

    How to set up Windows 7 to start in a "clean boot" State

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Step 2: Try to download and install the latest printer drivers.

    Please visit the websites below:

    Install a printer

    http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

    Install a printer on a home network

    http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

  • XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon

    someone on this planet knows!

    XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).

    Hello
    I recommend that you search/post this question on the link below:
    http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
    b Eddie

  • HP3070 analysis via the USB port, but don't scan the network, printing is ok? Used to work, but no more

    MyHP3070 deskjet will scan and print via USB link, but don't scan the network, printing is authorized via netowrk. Used to work but not anymor. I have windows XP laptop. I tried HP doctor but in vain. It says that it cannot connect with the driver. Tried to uninstall and reinstall from the CD and also downloaded driver via HP web page but does not. Any ideas what to try next? Also have Norton 360 software virsus and tried extinction of firewalls, etc., but it doesn't seem to help. What is confusing, is that it is used to work but now is intermittened, it won't work at all.

    I managed to uninstall with REVO Uninstaller. This removed the driver original from the Add/REMOVE program possibly a result.  This then allowed me to install the driver that you recommended to your link above. I ran out of time yesterday to test if the printer has worked with the new download, so I'll have to try again later today to see if it works. I would grab with result.

    Thanks a mil

  • HP Solution Center does not recognize the network printer

    Network has a hp 309 a printer, can print from the computer, the problem is:

    HP Solution Center not load-says incomplete installation.  If I plug in the USB cable and let it continue, it sets up a second printer that only works on the USB cable and it still does not recognize the network printer.

    Question how can I get the Hp solution program to reward the network printer.  If I reload the CD, then reinstall the will other people on the network of the problems?

    Resettlement on your machine won't affect only you, no other machines on the network.

  • I am connected but the network properties window does not show the size of the packets to all the

    I am connected but the network properties window does not show the size of the packets to all the

    Hi asaimas,

    You can follow this link & check if it helps:

    Configure the Option of configuring server network packet size

    Hope the helps of information.

  • does not print color photo of the network printer.

    I have a photosmart b210 connected to a home network.  The printer works correctly on the host computer and print the letters and pictures correctly.  How to print from a laptop on the network printer works correctly when you print documents (color works too).  When you print a photo, print out in black and white.  I have reviewed the settings, but cannot find a difference.  Any suggestions?

    Hi dwg711,

    Looks like you have a problem with Microsoft on Windows 7 images. I'm glad to hear that this problem has been resolved. Have a wonderful day.

  • Printing from laptop to the network printer.

    I nave an ACER laptop with Vista Home basic and try to print using the printer network HP Photosmart 3310, which works well with other computers without any cable connection, including a desktop computer Dell with Windows XL as well as another laptop.  I installed the printer and its name is displayed when I click on print on a paper, but nothing happens.  I tried using Windows online, but the number of product was not recognized for some reason any.

    If you have installed the correct Vista drivers for the printer? If so, then add the printer differently.

    Control Panel > printers > add printer. Add a local printer. New port > TCP/IP Standard (next). The TCP/IP Wizard starts. Use the IP address of the network printer and follow the instructions in the wizard. You will be able to select the printer mftr. / model. Your printer should be here since you have installed the drivers. Complete the wizard. MS - MVP - Elephant Boy computers - don't panic!

  • New Win 7 computer cannot access the IP address of the network printer. Help, please.

    Greetings,

    -----------------------------------------------------------------------------------------------------------------------

    UPDATE: we have found the solution to this problem, we, and that I posted an explanation as well as two ways to solve the problem in my 2nd post on May 5, 2015. Scroll down to it for the solution. Unfortunately, Microsoft does not allow the OP to mark one of their own messages as 'the Answer' so this thread continues to be listed as "no answer" when he actually answered me.

    -----------------------------------------------------------------------------------------------------------------------

    The original message follows...

    We cannot sign a new Win 7 (64-bit) computer to a printer ethernet established in our local network of 'working '. We have reached the limit of our troubleshooting skills and expertise assistance.

    Our Local network
    ------------------------
    The printer is a Dell 5100cn workgroup laser that is connected via an ethernet cable to a 10/100 workgroup switch 5-port Cisco/Linksys. The switch is connected to the built-in cable Motorola modem / 4 port gigabit router / WiFi access point. There is no server between the printer and the network.

    Other computers on the network run also Win 7 and have no trouble seeing and using the printer. Some computers are connected via a gigabit ethernet cable to the router Motorola. Other computers connect wireless WiFi (once again, by the same Motorola device). All computers, including the new ones, are attributed to the same workgroup.

    The printer has a static IP address. It also has an integrated Web page accessible within the network via a browser to view the status of the printer. All previous computers can view the status of the printer Web page by entering its IP address in a browser.

    The new Win 7 computer
    --------------------------------
    At the Windows command prompt, we successfully ping the IP address of the printer and received a return signal. However, we are unable to connect to the IP address of the printer (and status Web page) with a browser. And we cannot find the printer when install us the printer driver. We have tried to turn off the Windows Firewall and it did not help.

    When we install the driver, move us as a 'local' printer and create a new "Standard TCP/IP Port" for her. We enter the static IP address of the printer and name the port. Define us the Protocol to "LPR", enter the name of the queue ("lp") and activate SNMP State with name of the 'public' community and the index "1". These settings have worked very well with our previous computers.

    When the time comes to 'choose printer', we select 'have disk... '. ' and use the Dell 64-bit for this printer driver. But it does not work and do not print a test page. We even tried to install the printer as a 'network' printer driver, but it does not, either. In addition, the 'local' method always seemed to work best in the past.

    The new computer has no harm to see other computers and devices on the network. For example, there is a NAS connected to the same switch Cisco/Linksys like the printer and the computer can access the NAS via its static IP address. The new computer can also access the internet. He can't use the IP address of the printer. We even tried to change the address IP of the printer, but that did not help either.

    Despite the fact that the work - the network troubleshooter Windows command prompt ping indicates that the printer is not responding. What do we lack? Help, please.

    Greetings,

    I hope that this will be our last post on this subject. We have discovered the source of the problem and can offer two 'fixed' in case someone else runs into the same situation.

    With the help of MSConfig and a process of elimination, we have disabled non-Microsoft services that were running on the computer until we discovered that "Qualcomm Atheros Killer Service V2" was the source of the problem.

    Explanation

    ----------------

    Our new Win 7 computer contains a communication module ethernet/WiFi/Bluetooth e2200 Qualcomm Atheros. The manufacturer provides a '' Killer Network Manager '' for this system. Its purpose is to monitor and control the flow of data over a network connection in order to optimize for. For example, the user can choose to give the program A high priority and program-B low priority. This ensures that the program-A is less lag in the network traffic.

    The primary market for this function, so far, has been the online game (where the name of 'Killer'). It allows players to channel the bulk of the bandwidth available to their game and away from other programs and services that are running at the same time. A response faster online gives the player the advantage it needs to get "kill him" before someone else.

    This system of control of bandwidth has interfered with data packets of return of our network, clearing communication between our computer and our printer printer.

    Difficulty 1

    --------------

    The simplest solution for us was to disable 'Qualcomm Atheros bandwidth control' for the ethernet NIC that has been accomplished by going to: Windows Control Panel > network and Internet > Network and Sharing Center > change the settings of the card (in the sidebar). Then we clicked on our connection to the LAN (our NETWORK ethernet card) and select the 'Properties' command Finally, on the Networking tab, we have disabled 'Qualcomm Atheros control bandwidth' and clicked 'OK' button to close.

    All that was needed after that was a quick restart and we were able to access our printer even with the killer Network Manager and functioning of Qualcomm Atheros Killer Service V2.

    Either way, we left the control function of bandwidth enabled for wireless (our) network connection because we do not plan on using this network printer when the computer is untethered to ethernet.

    Difficulty 2

    --------------

    If you don't want the killer running Network Manager on your computer, you may be tempted to uninstall. Do not! Uninstall will also uninstall the drivers needed for your ethernet, WiFi and possibly your Bluetooth as well. We heard that some users have communicated with Qualcomm and were able to coax, on their part, the necessary drivers comm without luggage "Killer". But you don't need to do it, either.

    All you need to do is: (1) remove the 'Killer Network Manager' of the '"start up" folder of the start menu of Windows (under "programs") and (2) using MSConfig, uncheck "Qualcomm Atheros Killer Service V2" under the ' Services ' section. Then reboot and you're good to go. The killer Network Manager and his service will not work.

    Moreover, the reason for which we did not chose this method, ourselves, is because we see one deserves that available Killer Network Manager so that we can block network traffic to select programs. Solution 1 converts this easy thing because the Ethernet bandwidth control can be quickly activated again if she is ever desired. And we're leaving it enabled for our WiFi.

    Best regards, David-EH

  • Impossible to install the new printer, Pixma MG5320 without error "setting up the network printer down.

    I have a new all-in-one Canon Pixma MG5320. I am unable to get the installer to finish with on "setting up the network printer down." Despite numerous attempts to:

    (1) download the driver on the internet instead of the installation CD.
    2) with the help of msconfig with selective startup and disabled all programs except Microsoft.
    (3) creates the new administrator account and returned through it all.
    (4) turned off firewall and anti-virus
    The error is compatible and I never have the unit set up under devices and printers. The installation is carried out without any errors marked and you will see the error if you get into the details of setting up and get him. The computer sees the printer when it finds and he answers. The printer and the router, both seem to be communicating correctly. Repair auto and troubleshooting programs I ran as fix - it do not detect errors. The printer works fine through a USB cable. I don't want to continue to use USB because that's why I wanted to go wireless. I'm sure that I forget some of the things I went through in my attempts to get this working. Anyone with any ideas or know what's going on please help.
    Tech of Cannon was very knowledgeable and says he sees this once a month. He believes that some program interferes with the installation process. I do thanks in advance. Nice day.

    Hi Gary,.

    Thanks for posting in the Microsoft Community.

    From the description of the problem, you are not able to install the printer Pixma MG5320. I'll be happy to help you on this question.

    Let us try the steps from the following link:

    Solve printer problems
    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

  • HELP to the installed print head is not intended for use this product, or it may be damaged

    Help - please, I get a msg that says: "the installed print head is not intended for use in this product, or it may be damaged. I was trying many solutions I found on my search but nothing doesn't work.

    I was able to find the right answer to the problem I had with my printer. The printer that I have by the way is a HP Officejet 6500 E709a model.

    Here is the solution is simple:

    The print head is the device where sit the ink cartridges.  It may be incorrectly installed.

     

    Remove the ink cartridges (carefully, you can get ink on yourself).  Now using the system of grey lock on the right side of the cart, remove and re - install the print head.  Shake a little before lowering the lock wall.

     

    Now, re - install the ink cartridges.


    I had to do this process 2 times because the first time did not work. Make sure that when you remove the print head, the area is clean, try to remove the very careful, a little dust and I hope it will work for you also.

Maybe you are looking for

  • Is there an optimal resolution for iCloud sharing Photos

    Is there an optimal resolution for iCloud Photos sharing on computers, iPad and Apple TV? I want to scan photo album my grandparents to share with my friends and family. I scanned a few pages of test at 3200 x 2000 pixels. They have look great on my

  • Satellite C660: webcam message - device is locked by another application

    I have a Satellite C660 notebook PC series. the webcam was working fine with the old driver installed...I work a little bit and use Skype to talk to my wife while he's stuck in a hotel room... I connected as normal but Skype could not find the camera

  • Partition on HARD drive disappeared after formatting using the product recovery disc

    My laptop came with a partitioned hard drive C and D drives. After formatting my hard drive using the recovery disk of the supplied product with my computer, I don't have any option to partition the HARD drive, only for the 1. 46 GB for some recommen

  • Satellite A300 has red pixels instead of black

    My recently purchased Toshiba Satellite has a problem with its display (or graphics). It has type III Pixel defect (red subpixel is constantly on) and so something black comes black and Red (verticle lines). Unlike other cases on the net, the pixels

  • Pavilion g6-1050-st: no support for my product?

    Hello. I tried to configure my laptop so I can use the switchable graphics feature since I was 2 GPU. My Catalyst Control Center UI does not show this feature. I've tried 5 or 6 different guides to solve this problem, but no success. I came to the co