PC will not come out of Sleep Mode

Similar Questions

• Display will not come out of sleep mode

  I have a HP Pavilion p7-1410 Office running 64-bit Windows 8. Power management is in its default configuration.  When I try to wake the computer after being in standby mode, the computer comes out but the screen remains black.  I know with certainty that the computer itself is awake, that I can remote access to its hard drive.  But nothing of what I do wake up on the screen.  The only option that works for me is a hard-reset.  Someone knows how to fix this?

  The problem disappeared after the update of the system for Windows 8.1

• My Dell is power saving mode and will not come out

  My Dell is power saving mode and will not come out? Any suggestions? I can't get anything else than a screen that says it is in power save mode and press a key or move the mouse. No one who does nothing. Don't disconnect.

  Hi Ma32206,

  Monitors Dell will automatically mode energy saving after a predetermined time amount when the computer is idle. The Dell monitor will go completely black, rather than display a screen saver. This allows your monitor to essentially turn off until it takes again.

  A. Press any key on the keyboard or move the mouse. Either will automatically turn off the power saving mode. Alternatively, you can press the power button on your Dell computer tower or laptop.

  B. press one button a second time if the monitor goes power saving in standby mode. Standby mode allows the screen saver appears.

  Bindu R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Windows 7 home prem OA: my laptop won't come out of sleep mode after starting upwards!

  Hello I have a HP Windows 7 home prem AO. And I can't raise the lap top the sleep mod after departure. I tried rebooting with the removable battery according to the HP video help. But it does not help me I done all I can! If anyone can help me please!

  Hi there @Zotya15,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the computer not to wake. I'll be happy to help you.

  Please post the complete product and the operating system on your computer. Check out the following, if you need assistance with this information.
  How can I find my model number or product number?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  I will do everything I can to help to get more information.

• ALL-IN-ONE PHOTOSMART HP 5510 WILL NOT PRINT AFTER GO 'SLEEP' MODE

  My printer model:

  HP PHOTOSMART ALL-IN-ONE 5510 B111A

  Problem:

  Printer goes into sleep mode. After 25-30 minutes breaks the connection between the PC and the printer wireless. Beacon wireless is the same fashionable "sleep" and I see that the printer is connected to my router and there is internet connection. HP Print and Scan doctor sees the printer, but I can't wake the printer unless I restart it.

  What I've tried so far:

  I tried all the solutions offered hp.com; Reinstall driver, updating the printer software, setting static IP on the printer, static DNS servers, using HP print and Scan doctor.

  I've seen people questioned on this issue before and there is no solution. I really need help from HP!

  After days of research, the problem was finally solved! I applied the following steps below. Some steps may be unnecessary, I didn't waste my time knowing who.

  1. find your PC's DNS servers by typing ipconfig/all in CMD.
  2. assign a static IP address outside your DHCP range. For my Linksys router him between 192.168.1.100 to 192.168.1.150. So I put my static IP address as 192.168.1.20.

  To do this, click the button on your printer wireless. This will show the IP address of your printer. This type of your browser. Go/network/network address. Choose manual IP and write 192.168.1.20

  3 now come to section of the manual DNS server, and then type your DNS servers, you found before.

  4. open your HP printer program that must be installed with your driver. Utilities hit and update the IP address. Update your address with your static IP address.

  5. now go to your router settings. Find the wireless settings and change your not automatic standard 20 MHz radio band.

  6. change your standard channel to 6.

  7 find the wireless security and replace your WPA-personal security mode.

  8 disable UPnP

  9. This is the part of the KEY. Change the renewal of your key to 36000 seconds. (10 hours)

  10 go to the Windows Advanced Firewall. Enable all the disabled printer and share, entrants and outbond rules.
  I believe that the most important parts are affecting a static IP address outside your DHCP-range and change the key renewal time. I hope this works for you too

• labtop will not come out of hieberanation now that it takes 1/2 hour to an hour to get back to the top

  How can I fix it?

  Hello

  See if this information helps you:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• My computer started to shut down spontaneously hibernation mode and will not come out unless I'm hot restart.

  Curious... the power light flashing indicates also XP was put on Stand-By...

  Here's the manual where you can read about the Stand By and flashing, how come off stand by and maybe get some ideas:

  http://support.Dell.com/support/eDOCS/systems/dim9100/en/D86630LRs.PDF

  We will get the video information in msinfo32 as well:

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  Couple of things: 1) I ran anti-virus programs and found nothing.  It is probably because I have Webroot essentials running on my computer that pretty much catches most of the problems. ((2) I found the clogged fan grille almost closed with dust... I have now cleaned and 3) when I try to save power settings, I get an error message that says "Power Policy Manager unable to set policy - indicates two revision levels are incompatible."  I don't know if it's because I recently downloaded and installed the SP3 from Microsoft (so that I could download and install (upgrade to) Office 2010) which may be incompatible with Webroot?  I say it's when I right click the icon of the Service Pack 3 and click Scan, my webroot scan lights.  In any case, I've attached the information requested below.

  I hope that it is something as simple to clean my gird so the machine overheating... causing the closure.  My computer shuts down actually to the beautiful middle of my only uninstalling the software anti-malware you have suggested.

  Name ATI Radeon X 300/X 550/X 1050 Series
  ID of device PNP PCI\VEN_1002 & DEV_5B62 & SUBSYS_06021002 & REV_00\4 & 1A646D2D & 0 & 0008
  Adapter Type RADEON X 600 (0x5B62), compatible ATI Technologies Inc.
  Description card ATI Radeon X 300/X 550/X 1050 Series
  Adapter RAM 256,00 MB (268.435.456 bytes)
  Installed Drivers ati2dvag.dll
  6.14.10.6925 driver version
  File INF oem24.inf (section ati2mtag_RV380x)
  Color plans 1
  4294967296 colors Table entries
  Resolution 1280 x 1024 75 Hz x
  32 bits/Pixel
  0xF0000000-0xF7FFFFFF memory address
  0xFE9E0000-0xFE9EFFFF memory address
  Port of e/s-0x0000DC00-0x0000DCFF
  IRQ channel, IRQ 16
  Port of e/s-0x000003B0-0x000003BB
  Port of e/s-0x000003C0-0x000003DF
  Address 0xA0000-0xBFFFF
  Driver c:\windows\system32\drivers\ati2mtag.sys (6.14.10.6925, 3.40 MB (3 565 056 bytes), 11/02/2010 01:38)
   
  Name ATI Radeon X 300/X 550/X 1050 Series Secondary
  ID of device PNP PCI\VEN_1002 & DEV_5B72 & SUBSYS_06031002 & REV_00\4 & 1A646D2D & 0 & 0108
  Adapter Type RADEON X 600 secondary school (0x5B72), compatible ATI Technologies Inc.
  Description card ATI Radeon X 300/X 550/X 1050 Series Secondary
  Adapter RAM 256,00 MB (268.435.456 bytes)
  Installed Drivers ati2dvag.dll
  6.14.10.6925 driver version
  File INF oem24.inf (section ati2mtag_RV380x)
  Color of the aircraft not available
  Color not available Table entries
  No available resolution
  Bits/Pixel is not available
  0xFE9F0000-0xFE9FFFFF memory address
  Driver c:\windows\system32\drivers\ati2mtag.sys (6.14.10.6925, 3.40 MB (3 565 056 bytes), 11/02/2010 01:38)

• P1 comes out of sleep mode

  Hello

  With my P1 I am facing a problem where the phone is not in mode 'sleep'. It becomes active every few seconds automatically. It remains not in mode 'sleep'.

  Could you please help me here to set the phone to the mode 'sleep'? It is causing battery drain and the battery only lasts for a day.

  
  

• Error occurred during the attempt to eject the DVD RW. Eject a door opens, but the tray will not come out.

  I'm afraid that the disc does not fit in the tray correctly taken somehow.

  ... but the ndoes bin move any.

  If you have inserted the paperclick in the hole at (or very close to) 90 degrees you experienced resistance which you then push gently through to open the tray. If any resistance was seen, it is possible that the tray jumped the small gears in plastic which facilitate the opening and closing. If this is the case, you will need to open the housing of the computer and physically remove the replacement drive.

• machine will not go to the sleep mode print spooler always using 50% of the resources

  When looking at the system resources used in the print task spooler manager is always using 50% more. cancel operation and the system will be in standby

  Hi mrgadgt,

  ·        Printer is installed on your computer?

  ·        What is the service pack installed on your computer?

  Try the methods below:

  Method 1:

  Install the latest service pack, please see the link below: how to obtain the latest Windows XP service pack:http://support.microsoft.com/kb/322389

  Method 2:

  Follow the steps below:

  a. Click Start and type services.msc in the search box

  b. Locate the Printer Spooler service

  c. right-click on the service to stop the service

  d. navigate to location: C:\WINDOWS\system32\spool\PRINTERS

  e. delete all files in this location

  f. restart the computer

  g. restart the Printer Spooler service also (follow steps a, b).

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• my door on the cpu does not open when I press the button and the tray will not come out if I can put my cd. That is what it is?

  my door opens to a cd in. what's up?

  Hello

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• sound will not come out of my VIZIO HDMI TV connected. The video is OK. It wasn't a propblem until I upgraded from VISTA to Windows 7.

  What graphics card you have?

  What computer model?

  This is my mums computer, a G - 70 HP, Windows 7 Service Pack 1

  can't the unit today

  If it comes to your laptop, HP G70-250US notebook PC, see here for the drivers.

  Using 32 bit or 64 bit of Windows 7?

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=3860225#N200

• Apps do not come out of the mode of trial

  Bought the CC for the teams and nurses a user, but when you are connected to the CC, apps are still in the Mode of trial.

  Have tried to uninstall and reinstall completely CC, allow to disable and re-enable the user but nothing...

  Any ideas?

  Hi, stay,

  Please see the thread next link to this topic: Cloud Creative applications back in test mode after an update until 2015 for CC

  Kind regards
  Rahul

• modem internal not allowing not computer go into sleep mode

  My internal modem will not allow my computer to enter the mode 'sleep'.  I tried to disable the modem completely because I do not use it, but this has not fixed the problem.  Also sometimes my monitor will enter a screen in economy mode and will not come out of it, the computer does not respond when I move the mouse.  I have to turn it off completely for a response.  I don't know if the two problems are related.  What can I do?

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  All the default power plans and then set them as you wish.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Remote usb mouse freezes for bout 45 seconds after coming out of sleep mode

  Remote usb mouse freezes for bout 45 seconds after coming out of sleep mode

  Hi Aubrey,

  Step 1: Put the computer to boot and see if the problem still occurs

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.