PC won't start at all, and when I try with the recovery cd, I get blue screen

ORIGINAL TITLE: Help me please

My toshiba satellite p200-123 moel is any commissioning and when I try with the recovery cd I get a blue screen, also I can't start safely mode.the error message I get is... the file is maybe corrupt.the the file header checksum does not match the checksum calculated... help pleasseeee

Hello

You are booting from the recovery disk?

You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

How to change the Boot order in BIOS:

http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

If you continue to have problems with the help of Toshiba recovery disks, you will need to contact Toshiba.

As you get a blue screen, you may have a hardware problem.

Toshiba support:

http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

You can also try the free Toshiba Support Forums:

http://forums.Toshiba.com/

See you soon.

Tags: Windows

Similar Questions

  • I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

    I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

    local disk, I think he was trying to save it in the templates folder.  I changed it to save it on my counter top and it worked.  Rookie mistake.  This had to be the problem.

    Thank you

  • I'm editing in the bright room of Adobe and when I change in the develop module, I get the image I want, but when I see in the library module in its final State, it changed and degraded. Why is this happening?

    I'm editing in the bright room of Adobe and when I change in the develop module, I get the image I want, but when I see in the library module in its final State, it changed and degraded. Why is this happening?

    The difference between the raw edition photo and editing a PSD is that the PSD has black points and white pinned to the visible pixel values, the raw photo has still "headroom" with values of pixel darker than black visible and brighter than white, so when you export the raw file , there may be details that have improved (or obscured if it was another type of image) of the perception and mapping of the Compensation of the black spot on the final color profile.

    This means not PS is better or LR is lower, it is enough for you to go to a different type of image.  If you don't have PS to do final Assembly, you can probably do the same thing by exporting the raw in a 16 bit ProPhotoRGB TIF file, re-import this TIF and then set it LR, possibly using the tone curve to make the pitch black dark areas.

  • I use XP and when I try to open Outlook Express I get this message. "Outlook Express could not be started because MSOE." DLL could not be initialized. Outlook Express is not installed properly

    Last night, everything seemed normal. When I try to open Outlook Express, I get this message. "Outlook express could not be started.  The application could not open message store outlook express.  Your computer may be out of memory or your disk is full.  Contact Microsoft Support for assistance. (0x800700C1, 193) "after this message, the message above was posted. I bought and ran a program called FixCleaner with the same results. I also cleaned my disk and more 66 G remains to use and have a lot of available memory.

    Thank you all for your help, but I gave up and took it to my computer guru and fixed it. He said there where a few old accounts in the computer and registry was messed up and it solved the problem and now it works.

    THANKS again!

  • Satellite - black screen and can't restart with the recovery disk

    I have a black screen and can not restart with the restore disc but it seems to be.

    I find this odd, I can't ask Toshiba direct on my problem, but I have to wait for one nature in the heart of my problem or give me a helping hand

    Hey,.

    This means that you can see anything on the screen of the laptop or only if you try to start with the recovery disk?
    You can start Windows or access the BIOS?
    You must post a few more details, otherwise we can t help you :(

    Furthermore, Toshiba is not your first contact, you should ask an authorized service provider. They can help you too! :)

  • I have problems with my printer, most of the time I get a message saying to start my spooler and when I try it says I have an error any help would be appreciated

    as said I have problems with the printer spooler with the fact that it's the second printer the same problem, it seems to be a Windows related problem

    Hello Martin,

    Try this fix it site: http://support.microsoft.com/mats/printing_problems/ .

    Let me know if this solves the problem for you.

    Kind regards

    BearPup

  • How can I get the sim unlock card or carrier unlock t mobile USA, I use my phone in India and my sim card does not work and when I checked with the apple support, they said, it can be locked my previous carrier T-mobile USA, which is a solution

    How to unlock carrier T - Mobile USA, that I'm unable to use my phone in India as it says sim does not, I checked with Apple support they said previous carrier may have locked

    You will need to contact the carrier, it is locked to and follow their unlocking procedure. Only the carrier to ensure that it is locked can allow and process a request for unlocking.

  • When you try to install Windows XP from the CD-ROM, I get blue screens, "Stop 0x0000006B initialization process failed.

    Try to do a new re-install of XP Pro on a PC because it's 5 years old XP Pro becomes increasingly slow.

    I boot from the CD

    It loads the files of the CD & Gets the first 'starting Windows' screen

    Then BSOD; Shutdown of the initialization process failed 0x0000006B (0xc000003A, 0x00000000, 0x00000000)

    Specs: 1 GB of RAM

    Tip: Intel Desktop Board D865 GSA

    Any suggestions please?

    original title: cannot re - install XP from CD. Help!

    Glad you were able to solve your problem and welcome to the world wonder / random of the pc repair! :)

  • Only in a. won a Citizen receipt printer and I need to change the preference to print, I get a 'operations can not be a complete mistake.

    Only in a. won a Citizen receipt printer and I need to change the printing preferences I get a "operations may not be a complete mistake", I'm working on the administator. I am able to access printing preferences for all other printers that are on the computer.  This creates a problem that prevents the reception of a printing web-based program.

    I'm using a new hard drive with Windows 7 above.

    How do you re - define preferences depends on options software printers, and if this printer is fully supported under win7 - that is to say that the printer manufacturer provides some win7 drivers/software

  • I have a new desktop computer HP with Vista Home Premium 64-bit, with 8 GB RAM and when I try to start Zoo Tycoon 2, he won't play, said that I have no memory system.

    I have a new desktop computer HP with Vista Home Premium 64 - bit, with 8 GB of RAM, and when I try to run Zoo Tycoon 2, I get the following error message:

    You need at least 256 MB of system memory to run Zoo Tycoon 2. (0Mo detected)

    Y at - it a patch? I have read many "Workaround" and none of them work. I tried to run in Windows XP compatibility mode and it didn't work.

    Hey tprefling,
     
    Thanks for posting in the Microsoft answers site!
     
    Right-click on the zt.exe file and choose "Run as Administrator" to launch the program.
     
    See if you are able to play the game.

    If this does not work, turn your computer to clean the start State and see if the fgame plays very well.

    To put your computer in a clean boot, follow these steps:
     
    Note: If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
     
    1. sign the computer by using an account with administrator rights.
     
    2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
    If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
     
    3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
     
    4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
    Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
     
    5. click OK and then click on restart.
     
    For more information about the clean boot, see the link below:
    http://support.Microsoft.com/kb/929135
     
    In addition, change the size of virtual memory and see that helps. For more information, see:
    http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

    For more details on the Zoo Tycon game, consult the following link:
    http://forums.zootycoon.com/forums/default.aspx
     
    I hope this helps!
    Gokul T - Microsoft Support

  • Satellite Pro 2100 won't start at all - LED flash

    My SP2100 began to have feeding problems and now won't start at all. The AC adapter green LED is lit, that are relevant lights on the body of the laptop (although the "battery charge" light always orange these days). When I try the switch on, startup begins (in fact succeeded on occasion until this morning), however the battery indicator and the adapter lights are flashing, and everything stops again.

    On the rare occasions when I'll be past this stage, lights blinking, and the system soon shuts down again with a screen message "low battery." Until this morning, he would sometimes settle, the computer remained on, and the lights showed a State of equilibrium as usual.

    Initially I thought that the problem was of course the battery or the AC adapter, but now I'm starting to think that it is with internal PSU of the laptop (although I suspect the battery is probably tour after all this part of loading and unloading).

    Any ideas?

    Hello

    I think you're right. Flashing LEDS are a sign that hardware is defective.
    I can't say what exactly is the problem, this should be verified by a technicain.
    On the other side I don't know if it's worth to repair such an old machine.

    Good bye

  • Satellite L30 PSL33E won't start at all - the LED blinks 6 times

    Hello

    My poor mother is quite upset! Its Satellite L30 PSL33E just died.

    It completely off and now won't start at all.
    Orange light flashes six times when you press the power button.
    No hard drive, fan, screen or any other noise / activity.

    She tried without the battery.

    A kind of hardware failure, I guess.

    Any ideas what this blink code means?

    Thanks in advance,
    D.

    I put t know what the code means, but you can read it. short means 0 and 1 long

    In any case, the error code means that a hardware failure has been detected on the motherboard and motherboard replacement could help you?
    Why?

    because what is really hard to fix a motherboard for laptop very s.
    It especially not possible if you n t s have sufficient knowledge, experience, and special tools.

    I think that either you contact the ASP in your country and ask a difficulty or you'll have to buy a new laptop ;(

  • HP dc7600 xp pro won't start at all no safe mode, the monitor turns off

    HP dc 7600 does not start I have no disks.partition to install. (1) \\service 32 blah blah about 18 diferenent 32 files happen when I try safe mode to move forward, then lock tried new monitor I just need to get the safe mode to work

    First of all, please do not proceed with the bla, gloom :)

    If you can tell us exactly what you see, chances are that someone has seen and knows how to solve this problem.

    When you start mode without failure and the system crashes, which is the last line that you see on the screen (blah, blah should not be the answer).

    Tell us something about your system:

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    The afflicted system has a working CD/DVD (internal or external) drive?

    If the system works, what do you think might have changed since the last time it did not work properly?

    Have you installed a new hardware or software before this affliction?

    Was there something wrong before that lock in question, and to try to fix things, has taken a chkdsk or verification of disk errors?

    While you wait, I think you should make you a bootable CD from the Console of the Recovery XP (no XP media required) and get your started on that system and run a chkdsk/r from the XP Recovery Console.

    Here's how:

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

    This is not the same as recovery disks that might have come with the acquisition of the system store.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    xp_rec_con. ISO

    Download the ISO from here:

    http://www.mediafire.com/?ueyyzfymmig

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

    http://www.ImgBurn.com/

    When you install ImgBurn, DO NOT install the Ask toolbar.

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

    A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.

    It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

  • Won't start at all. just a black screen. Only the satrts upward on safe mode

    Won't start at all. just a black screen. Only the satrts upward on safe mode

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • My destop all icons are colored and when I try to make crystal or visible, I can't change

    My destop all icons are colored and when I try to make it transparent or visible, I can't change

    Click the Start button, select Control Panel

    Check points: -.
    1. in the performance and Maintenance/adjust Visual effects or if you use the classic theme - settings/system/advanced/performance
    'Use the shadows of the desktop icon labels -' must be checked
    2. right click on the desktop, point to arrange icons by and ensure that items Web Lock on Desktop is unchecked;
    3. If you have content web on your desktop, transparency does not do a right click on the desktop. Select properties, then go to the Desktop tab.
    Click on the button customize the desktop, and then open the Web tab.
    Uncheck everything in the box of Web Pages
    Press OK, then apply and OK again.
    4. you can't have a file html as wallpaper, it must be an image file.
    It is sometimes necessary to restart to take effect, sign out and then sign back in.

Maybe you are looking for