PC worked 100% use of the processor from the beginning

Similar Questions

• Windows 8 guard slows to grip and 100% use of the disk.

  original title: upgrade to WINDOWS 8 PRO - system crashes - no Resposnive

  I had recently upgraded family basic form win7 Windows pro. My laptop does is VPCEH15EN from Sony. By Download Upgrade Assistant I had updated. The 1st time, my system became dead slow. After reboot, I found that my use of the disk is 100% all the time. With very little knowledge I had killed some of the background process that I know (and also a few random apps) use of disck came dowm. Here begins another problem. Am not able to uninstall, open Task Manager, change some settings etc... Can help. I have 8 GB of ram, processor i3, 64-bit

  Hello

  I had this same problem, my computer laptop lenovo would remain idle for about 15 minutes, then go back, 100% use of the drive, but not the tag to any process.

  It was a scheduled defragmentation task.

  Task Scheduler open-> Microsoft-> Windows-> Defrag

  Disable or delete the task.

  Hope this helps someone else.

  I thought it was drive problem hard as the computer would be useless without restart using the power button.

• HP 15 Notebook PC TS: Freezing, blue screens and 100% use of the disk.

  I constantly freeze because of my pc is always 100% use of the disk. Due to the use of disk, it causes my laptop to a blue screen, I received the following information from the configuration of the system errors: Bad, kernal error in the data on the page, out of State driver. When the 100% disk usage, I use about 1 mb of space.
  I use a wireless internet connection.
   
  Before these problems have taken place that I had upgraded to windows 10, shortly after the use of disc started to go up more often eventually cause my laptop to blue screen. With the bsod, it says that my operating system could not be found, so I had to go back to windows 8 through factory reset. With my first boot on my factory reset, I was still having the same problem as before, but since then my errors and problems continue to increase.
  I hope to diagnose my problem and get help before it's too late.

  Hi Zinchy,

  Thank you for the update. Yes, you can run a test lying on the hard drive from the BIOS. Here is a link to guide you.  HP Notebook PC - hardware failures (10, 8 Windows) screening  If the hard drive test OK, I'll try the clean install of Windows 10. Please hold me.

• Windows 8 100% use of the disc on 3 of my computers! Can not find a solution...

  Hello users of Windows 8.

  I'm running Windows 8 on 3 PCs (2 computers laptops, desktop 1) and I'm going to 100% usage of the disk on each of them. It started on one of my laptops, and then my desktop and now (started about 4 days ago) it happens also on my wife's cell phone. I have lived these forums and many others still looking for corrections of over and over again.

  I started having this problem at the beginning of 2013 on my Toshiba laptop. I waited patiently a correction (which is obviously never) until my office started having the same problem and I started to study the problem myself. I ran across countless people who have the same problem as I am. Some find corrections and some did not. Unfortunately have not yet found a solution to one of my computers running windows 8.

  My PC experience this problem at different times. My laptop experience this problem at startup, and which seems to be irregular intervals, throughout the use. My office has the problem, if I run a game or some programs (e.g. Microsoft Word, a CAD program, Firefox etc.).

  The problem that causes this on my desk is related to the SYSTEM in the Task Manager. I opened "Go to details" and he directs me to (NT Kernel System &) which in turn heading C:\Windows\System32\ntoskrnl.exe.

  The problem that causes this on my laptop is related to the SERVICE HOST: LOCAL SERVICE (usually restricted or sometimes without impersonation network). All lead me to a svchost.exe.

  These are the things that I tried on my laptop and desktop:

  1. update of the BIOS (already had updated versions)
  2. Update ALL my drivers
  3. my AV (Avast!) uninstalled and reinstalled
  4. uninstalled my AV (^ ^ ^) and I tried to use MSE
  5. uninstalled all AVs and tried to start the PC
  6 installed all Windows updates
  7. no installed VirtualBox
  8 disabled indexing files on the C: drive
  9. set to High Performance power management (not worked but would have not left like this on my laptop in any case)
  10 disabled the automatic updates
  11. off fragmented my records
  12 optimization of disk turned off
  13 clean my registry with CCleaner
  14 erased all the options in the Indexing Options
  15 Ran SFC/Scannow in a high CMD
  16 set my virtual memory to a custom size (twice the size of physical memory)
  17 disabled some services others have said are causing the problem. Disabled services:
  A. WSearch (Windows Search)
  B. WMPNetworkSvc (Windows Media Player Network Sharing Service)
  C. Defragsvc
  D. PLA
  E. Sysmain (Superfetch - did not work, but still once, even if that were the case I am not leaving this off service)
  18 start in Safe Mode. (No difference)
  19 run "Repair my computer" from the disc of Windows 8
  20 re-installed Windows 8 on my laptop
  21. much more "patches" the list could go on and. Those who I think are relevant mentioned above

  Computers, on which I tried these are:

  My laptop (Toshiba Satellite C75D, stock)
  My office (Custom, Phenom XII 940 BE CPU, Mobo from ASUS m3a78-em, XFX AMD Radeon GPU HD, 6 GB of ram DDR2 7790)

  I have not tried one of these "Bugs" on my wife's cell phone:

  ASUS X501A

  Any help with this would be greatly appreciated.

  I would also like to know why Microsoft has not yet solved this problem. How many people must experience this problem before you decide to do something. I saw people having this problem dating all the way back for 2012. I saw hundreds if not thousands of people having this problem and trying to find patches online, so I guess that many, many more are not of or don't know they have it.

  As customers, what do we have to do? Menace of a petitions signed by restless customers ready to bombard the BBB complaints if nothing is done? I would absolutely describe Windows 8 with this question like a defective product. Is there anything we can do to listen to Microsoft?

  * Yes, you're right.
  I stopped the automatic updates and deleted everything located on: "X:\Windows\SoftwareDistribution\Download."
  He has become much better. Then I disabled the windows swap files. (using the TuneUp Utilities) and even better. and then stopped defragmentation automatic of all readers and also done the Clean Boot and now the problem has disappeared, and the PC flies! Better than ever.

  I hope that the problem will not return again.

  Never go around everything related to windows updates, as I pushed him suddenly a button to use windows update to install a driver and the PC has been locked again and killed at the use of the disc.

  Here this will help you guys :) *.

  Sorry I forgot to mention: D!

  I think so... This o.o. worked... All of a sudden when I deleted the folder... My machine stopped the 99%... Now remains at 1% oo *? ....

  If you'll notice, you did some update Windows or your pc must have... For example, updates could try to settle... When I deleted the folder it took like 10 minutes to remove.

  After waiting like 10 side my drive keeps 2%, it does not go when iddle!

  It's a nice solution, thanks a lot!

  your welcome my friend.

  If the problem is back once again, try to disable the "superfetch" and "prefetch". It's more important that deleting those files and has the greatest effect on performance.

  You can use this guide here:

  http://www.tekrevue.com/Tip/disable-SuperFetch-prefetch-Windows-8/

• 100% use of the disc at the opening of Windows Media Player

  Since around in April or may, I had the recurring problem in which my drive would draw up to 99% or 100%, without anything to really to do. I tried a lot of solutions in order to solve this problem, and it seemed that Firefox was related to the problem. Whenever I opened it, it would go to the top, and when I want to the farm, he must go down. At that point, I was never able to locate exactly the root cause, but not opening not FF would prevent the problem, so I just never.

  A few weeks ago, the problem started to reappear, this time without Firefox causing the problem. It varies in severity, sometimes it crashes only for a minute, sometimes for long periods of time, where my computer will be completely immobilized. I tried a variety of solutions for this problem, such as:

  -Increase virtual memory

  -Disable Superfetch, Windows Update and Windows Search

  -Using CCleaner to clean the registry

  -Updating of the PC

  -Manually update Windows (that I did recently, over 1 GB to missed day)

  While it seems that performing Windows Update, the problem persists. In general, it seems that the problem does not occur now that if I open Windows Media Player. Earlier, the problem would happen certainly when I open WMP, but sometimes also just randomly. The computer will work fine, but when I open WMP, the use of the disc will go straight up to 100%, sometimes stay there until I got close, or sometimes will stay on its own. It is completely random. When I look in the resource monitor, nothing special seems to appear when that happens. Sometimes associated with WMP file will appear, and also the pagefile, but most of the time there is still some files that appear before the huge pic. I already have one and reinstalled WMP, but that doesn't seem to help.

  For the life of me I can't figure out what to do to solve this problem. It's incredibly annoying, and occasionally making my computer unusable is a huge obstacle.  I also really want to use WMP again, as I still discover another media player that I love so much. In addition, if the problem is not fixed, I know, in the next few months, it will be just another program that causes this problem.

  Jhcr4d

  Doesn't appear you have had the problem when this trace has been executed.  There were only 3 - 4 times for more brief seconds Chrome maxed out disk use.  Chrome is the largest use of HD process.

  If you were not having HD 100% at the time of the trace please run a trace when you're

  

• 100% use of the disk in the Task Manager when you use Photoshop CC (8.1-64-bit Windows)

  Hello

  I have been using Adobe CC for a month or two now. I have an Asus laptop with Intel Core i7 (2.4 GHz), 6 GB RAM, 1 TB hard disk space and 64 bit, almost 6 months old. Following apps are installed: Photoshop, Illustrator, InDesign, Audition, Acrobat Pro XI, Premiere Pro and Media Encoder. I recently did an update through Adobe CC for Photoshop and Illustrator, all the others are up to date.

  I think, but I could be wrong, since this update Photoshop is weird on my laptop. When I run Photoshop, my task manager immediately indicates a rate of 100% of my use of the disk. This seems to be off, after it is fully operational, but when I start to edit a file, the use of the disc immediately breaks back to 100%, while the CPU remains below 10%, RAM stays 3, 5-3, 8 GB (only 60% of total capacity) and even the actual read and write speeds of my HARD drive are not particularly high (5-10 MB max). And because of the use of the disk of 100%, Photoshop freezes in an instant and operating it is almost impossible.

  I already uninstalled Photoshop, passed all services and * that could trigger it in Windows 8.1 (Google search for: 8.1 Windows disk use 100%), re-installed Photoshop and I still have the same problem.

  So, I was wondering if there could be a solution to this problem or if anyone else has this problem as well?

  Thanks in advance!

  UPDATE: this error only applies when trying to manipulate, add, change or delete the text. All other functions (unrelated to the text) seem to work fine.

  Check out this help file: troubleshooting fonts | CS6 2014 CC, CC, Photoshop, CS5

  You can also try resetting Photoshop preferences and increasing the amount of ram available to Photoshop, if troubleshooting doesn't help.

• A CPU 100% used by the core - System Idle shows nearly 100%

  Almost every day after execution, for several hours, my computer will slow down to where Visual Studio is almost unusable. When I go to the Task Manager, it shows one CPU maxed out. When I go to the process tab it shows that System Idle Process is anywhere from 87 to 94%. When I turn the Show kernel times a CPU becomes completely red. When I go to the overview of the resources there is no activity for page memory faults, no network activity and very little disc activity (0 KB/s up to 5 = 48 KB / s). Any idea of what is causing all my cpu to be gnawed by the kernel? Is it possible to find out more details on what process kernel does this?

  Thanks for all the great links, I don't know that I'll use them in the future.  However, even if I had no proof, I decided to replace the hard drive. I cloned the existing hard drive (so all the problems of software remains the same) and the problem is now gone.

  Tod

• Can I use the product windows XP from my old CPU key to downgrade my new processor from Vista to XP?

  Vista to XP question

  Can I use the product windows XP from my old CPU key to downgrade my new processor from Vista to XP?

  N ° decommissioning requires installation of XP from an XP installation cd and a retail product key.  If XP is preinstalled on the old computer, the product key on the label is valid for the copy of XP OEM is installed on your old computer, even if it is still on the old computer.   An OEM license is not transferable to any other computer.

  Before you plan to install XP on your new computer you must visit the manufacturer's Web site to see if the XP drivers are also available.

  What you trying to accomplish?

• Tried to make use of the author of Document from Microsoft, but it does not work

  Original title: XPS Document Writer

  Tried to make use of the author of Document from Microsoft, but it won't work, I tried to give it as a printer by default, then trouble shoot it... nothing that's happened... What is happening with this program, this is my 1st time using this program since I bought this computer in 2007... Pls HELP!... felix n.

  Hello

  Thanks for posting your query on the Microsoft Community.

  You may consult:

  Print to the Microsoft XPS Document Writer

  http://Windows.Microsoft.com/en-us/Windows/print-to-XPS-document-writer#1TC=Windows-7

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• I use LR 6.5 on an iMAC. Files RAF Fuji originally, I imported from an SD card worked and exported in the form of PSD and then after saving the files on an external hard drive RAF erased from Lightroom. I now want to import some RAF b HD files

  I use LR 6.5 on an iMAC. Files RAF Fuji originally, I imported from an SD card worked and exported in the form of PSD and then after saving the files on an external hard drive RAF erased from Lightroom. I now have to import some RAF of the HD files but LR shows them as dazed out and said that they have already been imported when I hover over the thumbnail. I have this problem when importing files in the same HD Canon CR2, and who have been treated exactly the same. Anyone got a clue as to why this is happening? Thanks, Phil

  Hi Phil,

  If Lightroom then reads these as duplicate files, it shows that they are already present in your Lightroom Catalog.

  You can search by file name and check if the image is present in your library.

  Kind regards

  Claes

• I'm black or white rectangles covering my picture while I'm working. I unchecked the camera raw 'use the graphics processor' I use an end 2013 27 "iMac. Can anyone help?

  I'm black or white rectangles covering my picture while I'm working. I unchecked the camera raw 'use the graphics processor' I use an end 2013 27 "iMac. Can anyone help?

  Hi Joel,

  • What version of Photoshop installed on your computer?
  • Also, please go to the Photoshop preferences, then the performance tab.
  • Here please click Advanced under 'Use Graphics Processor' settings and change the mode of drawing on 'Basic '.
  • Also uncheck "Open CL"
  • Restart Photoshop and then try to open an image and see for the boxes.

  Let me know if it helps.

  Kind regards

  Tanuj

• I use PS extended 6. It works well, but it will not be updated. I'll take a notice in my application creative cloud he has an update waiting. I'll click on the UPDATE button and it works 100% and then give me a update failure message.

  I use PS extended 6. It works well, but it will not be updated. I'll take a notice in my application creative cloud he has an update waiting. I'll click on the UPDATE button and it works 100% and then give me a update failure message.

  I fixed the old-fashioned way. Uninstall - reinstall. Works fine now.

• I have problems to download from a Web site with more than 100 pages. The download is stuck at 6%. Muse has a page limit? I use Adobe Muse CC 2014 v7.4

  I have problems to download from a Web site with more than 100 pages. The download is stuck at 6%. Muse has a page limit? I use Adobe Muse CC 2014 v7.4

  425 is the error that you have been doing all along? That looks like a firewall or router problem or a server side hosting configuration problem.

• I can't get my redemption code to work to get my serial number... No one is very useful with the cat from adobe... wasted over an hour of my time. Please someone help me

  I bought 13 items. I can't get my redemption code to work for my serial number.

  No one is very useful with the cat from adobe... wasted over an hour of my time. Please someone help me

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  - and https://forums.adobe.com/thread/1572504

• My Satellite A100 GPU fan works 100% all the time

  First: I have the Satellite A100-440 with GeForce Go 7300 and XP Professional (and Ubuntu).

  There is something wrong with thermal control. The first PC Wizard has always shown that the temperature of my GPU is "a very large number" and the fan is runnign 100% all the time (the main problem). Then I installed ATItool hoping he would show the temperature correctly. Well, it worked in part. Now when I check the temperature with PC Wizard, it indicates the temperature of the GPU normally (like 30-40 degrees celsius), but it also shows the GPU Diode temperature it's "a very large number" (as 4.294967E + 09 C) and the fan will operate at 100%.

  I tried to control fans with RivaTuner, but nothing happens.

  So if anyone has an idea how I could continue to solve the problem, I would be very grateful. I don't know if the problem is with the hardware (I could take this service) or with the software...

  Thank you!

  Post edited by: Avilja

  Hello

  Why are you talking about 'problem' and 'solve this problem?
  I see no problem!
  First of all I'm not all 3rd party applications that monitor temperatures. I'm not 100% sure if these applications provide a good values.

  However, as far as I know the laptop was shipped with Vista and not XP and Linux. You do not use a factory settings. It seems that you have set up the laptop with new applications and you should know that all the software installed and running insists on the CPU and other parts.

  BIOS fan table supports different temperature and cooling of the speed measurements. This means that if the temperature rises to a higher level, the cooling module starts and tries to decreases the internal temperature.

  Usually the temperature depends on the use of the laptop. If several processes of the OS are running in the background, that the CPU performance are high, the temperature rises and the fans start to run. There is nothing unusual about it.

  Furthermore, the dust and debris inside the laptop might have a bad influence on the laptop cooling. From time to time, it is advisable to clean the cooling modules.

  Last but not least the laptop must be placed free on table to ensure the circulation of air correctly. Don't forget that there is enough free space around the laptop.

  Finally, I must say that one of my friends has an A100 and the fans run correctly.
  This means that the cooling modules works with maximum performance while playing games or using graphics software.
  However fans do not work with maximum performance using only common programs like IE software or office.

  Good bye