PC XP sees but cannot access Vista PC on network. Access is denied!
I have 4 computers on a network. The network is set up in a private capacity. 3 computers XP Home can meet and 1 PC Vista Home Premium and can share files between the computers XP 3. The Vista PC can see other computers and can send files to them quite happy.
However, when one of the XP computers trying to access the Vista computer I immediately get an error "\\VistaPC is not accessible. You might not have permission to use this resource network etc etc. Access is denied. "
I turned on the discovery of the network, public folder sharing, file sharing and printer.
Protected by password sharing and multimedia file sharing are turned off, but all shared folders on the Vista PC all have their set of permissions for everyone because I don't want to have to enter the username and password whenever I need access.
LLTD is installed and Vista network map shows all devices and their correct connection; all wired through a Netgear router except 1 wireless XP.
Help, please. It drives me crazy!
I only use the Windows Firewall and AVG Free anti-virus.
Well, I finally solved my problem, but don't know what action it reached or if it was a combination of actions. If anyone is interested, here's what I did.
On the Vista machine, I edited sharing the folder Public, all subfolders and files to share fully.
Checked the security settings for all of the public folders, subfolders and files, and then assign full control to all users.
'Everybody' added as a user and allowed full control for this user.
Restarted after each step but when even could not access shared folders on the Vista machine.
In desperation I edited the registry; went to HKEY_LOCAL_MACHINE / SYSTEM / CurrentControlSet / Control / Lsa
Change the value of a key called "restrictanonymous" to 0 instead of 1
Quick restart and Hey Presto my network to work properly
My network is secure and so I didn't bother reduce some apparent security settings. Don't know if it's appropriate for everyone but it might give some clues.
Good luck
Tags: Windows
Similar Questions
-
Cannot open email in Hotmail via Firefox. I have Vista installed on the pc and Windows 7 on the laptop, but cannot access all the features of Hotmail. I tried to clear the cache and restart Firefox, but I still cannot use Hotmail.
Not this problem when I go to Internet Explorer.
Hello, it was noted that the foxit pdf plugin is causing this issue. You can disable this plugin in firefox > addons > plugin until what foxit offers a patch/update for the plugin.
-
Hello, I have a problem with surfing with Firefox. The browser starts but cannot access any Web site. The same question is experienced with Google Chrome. However, Internet Explorer works smoothly. Thank you
Some problems occurs when your Internet security program has been implemented.
trust the previous version of Firefox, but not more acknowledges your
update as being approved. Now how do I solve the problem: to allow
Firefox to connect to the Internet- Make sure your Internet security software is up-to-date (for example, you are using the latest version).
- Delete Firefox to list your program of programs approved or recognized. For detailed instructions, see
Configure the firewall so that Firefox can access the Internet. {web link}
-
I don't understand why I can't login my account using mozilla but with googlechrome fb, I am able to do... Mozilla can load the fb site but cannot access my fb account... I'm uncomfortable with the use of mozilla as my browser... pls help thanks
- "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
- 'Delete Cookies' of sites that cause problems: Tools > Options > privacy > Cookies: "show the Cookies".
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).
- Makes no changes on the start safe mode window.
See:
-
Hello
My problem is my WiFi says its connected but I can't browse or access the internet.it just tells me "unable to connect to internet computer is not connected to the internet", but my wifi says 'connected'.i tried to go to the cmd prompt and typed in "netsh int ip reset resetlog.txt c:\" goal it shows me "reset failed.access is denied .he don't s no user specified settings to be reset to zero." please "» What can I do?
Thanks in advance.
Hello @jerome256,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.
I understand that you are having a problem with your WiFi and wanted to help you!
You are trying to access WiFi through router? If you are connected to your wireless network, but cannot access the internet, then the problem may be with the router. Check that the router is connected to the internet. If you have more than one router, then you can ensure that you are connected to the correct router. You can also try unplugging the router for about 30 seconds, and then reconnecting it. Please consult the following document, as it can help solve the problem for you:
HP PC - Troubleshooting wireless network and Internet (Windows 10)
Please let me know if this information has been helpful by clicking the thumbs up below.
Have a great day!
-
When I connect to Hotmail, I see my emails but cannot access that everything is frozen. A message then appears that direct does not and asks me to refresh. Windows looking for a solution and after a new wait everything is accessible. Very annoying, how to cure it?
Hi techcnophobe1,
Thank you for visiting the Microsoft answers community.
The question you have posted is bound using Windows Live and would be better suited in the Center of Windows Live Help solutions. Please visit this link to find a community that will support what ask you
-
I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer. The computers are connected by a switch, fixed IP addresses that are correctly configured and point to a DNS server outside the network. When I try to open the icon for one of the computers, he asked for credentials. I try to type the user name for the computer that is sharing the resource and the password. It is the user account whose computer is loged on and belongs to the Administrators group. for example: user name (Computer1\username) password (password). It does not work. The Windows Firewall is disabled on all computers. It worked well there 2 days. I can't find anything wrong with the network settings. Does anyone have a solution? Thank you.
If the portion of the machine has activated - Simple file sharing (i.e. it is XP Home or it is XP Pro with Simple (default) file sharing) - while all file sharing connections authenticate as user 'guest '. It will not matter what username / password you provide, it will attempt to authenticate as 'guest '. If the guest user has received a password or the guest account is not active, you will experience the symptoms you describe.
If the serving machine running XP Pro and Simple file sharing is disabled, then you should be able to connect by specifying the user as computer\user and the password to connect. To turn off Simple file sharing:
"How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
<>http://support.Microsoft.com/kb/307874 >Also:
"Description of the account in Windows XP"
<>http://support.Microsoft.com/kb/300489 >HTH,
JW -
Trying to repair XP Home CD, but cannot access the screen where you choose to repair or install fresh.
I get the first screen where you have the choice to configure windows or press 'r' for recovery console.
After I press enter for the installer, do not me the usual on-screen next where it is said that if the following XP installation is damaged, you can repair it. Instead, it leads me to a screen where it shows my partitions and asked that one I want to install windows on. If I choose "C:" he then told me that there is already a system opperating on the partition...
Hello
Follow the steps of "Error Message: Setup cannot set the required Windows XP Configuration Information.
' http://support.microsoft.com/kb/316425 '.Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK
I tried to set up a simple customer vpn using this document
VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK BEHIND "RA"...
6.3 (5) PIX version
interface ethernet0 car
Auto interface ethernet1
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the encrypted password of VmHKIhnF4Gs5AWk3
VmHKIhnF4Gs5AWk3 encrypted passwd
hostname VOIPLABPIX
domain voicelab.com
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
access-list 101 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 101 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 102 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 102 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0
pager lines 24
Outside 1500 MTU
Within 1500 MTU
IP address outside 208.x.x.11 255.255.255.0
IP address inside 172.10.2.2 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP local pool voicelabpool 172.10.3.100 - 172.10.3.254
history of PDM activate
ARP timeout 14400
NAT (inside) - 0 102 access list
Route outside 0.0.0.0 0.0.0.0 208.x.x.11 1
Route inside 172.10.1.0 255.255.255.0 172.10.2.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
http 172.0.0.0 255.0.0.0 inside
http 0.0.0.0 0.0.0.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp-aes-256 trmset1, esp-sha-hmac
Crypto-map dynamic map2 10 set transform-set trmset1
map map1 10 ipsec-isakmp crypto dynamic map2
client authentication card crypto LOCAL map1
map1 outside crypto map interface
ISAKMP allows outside
ISAKMP identity address
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 encryption aes-256
ISAKMP policy 10 sha hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
vpngroup address voicelabpool pool cuclab
vpngroup dns 204.x.x.10 Server cuclab
vpngroup cuclab by default-field voicelab.com
vpngroup split tunnel 101 cuclab
vpngroup idle 1800 cuclab-time
vpngroup password cuclab *.
Telnet timeout 5
SSH 208.x.x.11 255.255.255.255 outside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 172.10.1.2 255.255.255.255 inside
SSH timeout 60
Console timeout 0
username labadmin jNEF0yoDIDCsaoVQ encrypted password privilege 2
Terminal width 80
Cryptochecksum:b03a349e1ac9e6022432523bbb54504b
: end
Try to turn on NAT - T
PIX (config) #isakmp nat-traversal 20
http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml#Solution1
HTH
-
I have problems to access the resources within the network when connecting with the Cisco VPN client for a version of 8.4 (3) operation of the IOS Cisco ASA 5510. I tried all new NAT 8.4 orders but cannot access the network interior. I can see traffic in newspapers when ping. I can only assume I have NAT evil or it's because the inside interface of the ASA is on the 24th of the same subnet as the network interior? Please see config below, any suggestion would be appreciated. I configured a VPN site to another in this same 5510 and it works well
Thank you
interface Ethernet0/0
Speed 100
full duplex
nameif outside
security-level 0
IP x.x.x.x 255.255.255.240
!
interface Ethernet0/1
Speed 100
full duplex
nameif inside
security-level 100
IP 10.88.10.254 255.255.255.0
!
interface Management0/0
Shutdown
nameif management
security-level 0
no ip address
!
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network of the PAT_to_Outside_ClassA object
10.88.0.0 subnet 255.255.0.0
network of the PAT_to_Outside_ClassB object
subnet 172.16.0.0 255.240.0.0
network of the PAT_to_Outside_ClassC object
Subnet 192.168.0.0 255.255.240.0
network of the LocalNetwork object
10.88.0.0 subnet 255.255.0.0
network of the RemoteNetwork1 object
Subnet 192.168.0.0 255.255.0.0
network of the RemoteNetwork2 object
172.16.10.0 subnet 255.255.255.0
network of the RemoteNetwork3 object
10.86.0.0 subnet 255.255.0.0
network of the RemoteNetwork4 object
10.250.1.0 subnet 255.255.255.0
network of the NatExempt object
10.88.10.0 subnet 255.255.255.0
the Site_to_SiteVPN1 object-group network
object-network 192.168.4.0 255.255.254.0
object-network 172.16.10.0 255.255.255.0
object-network 10.0.0.0 255.0.0.0
outside_access_in deny ip extended access list a whole
inside_access_in of access allowed any ip an extended list
11 extended access-list allow ip 10.250.1.0 255.255.255.0 any
outside_1_cryptomap to access extended list ip 10.88.0.0 255.255.0.0 allow object-group Site_to_SiteVPN1
mask 10.250.1.1 - 10.250.1.254 255.255.255.0 IP local pool Admin_Pool
NAT static NatExempt NatExempt of the source (indoor, outdoor)
NAT (inside, outside) static source any any static destination RemoteNetwork4 RemoteNetwork4-route search
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork1 RemoteNetwork1
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork2 RemoteNetwork2
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork3 RemoteNetwork3
NAT (inside, outside) static source LocalNetwork LocalNetwork static destination RemoteNetwork4 RemoteNetwork4-route search
!
network of the PAT_to_Outside_ClassA object
NAT dynamic interface (indoor, outdoor)
network of the PAT_to_Outside_ClassB object
NAT dynamic interface (indoor, outdoor)
network of the PAT_to_Outside_ClassC object
NAT dynamic interface (indoor, outdoor)
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
dynamic-access-policy-registration DfltAccessPolicy
Sysopt connection timewait
Service resetoutside
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-ikev1 esp-md5-hmac bh-series
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto-map dynamic dynmap 10 set pfs
Crypto-map dynamic dynmap 10 set transform-set bh - set ikev1
life together - the association of security crypto dynamic-map dynmap 10 28800 seconds
Crypto-map dynamic dynmap 10 kilobytes of life together - the association of safety 4608000
Crypto-map dynamic dynmap 10 the value reverse-road
card crypto mymap 1 match address outside_1_cryptomap
card crypto mymap 1 set counterpart x.x.x.x
card crypto mymap 1 set transform-set ESP-AES-256-SHA ikev1
card crypto mymap 86400 seconds, 1 lifetime of security association set
map mymap 1 set security-association life crypto kilobytes 4608000
map mymap 100-isakmp ipsec crypto dynamic dynmap
mymap outside crypto map interface
crypto isakmp identity address
Crypto isakmp nat-traversal 30
Crypto ikev1 allow outside
IKEv1 crypto ipsec-over-tcp port 10000
IKEv1 crypto policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 1
life 86400
IKEv1 crypto policy 50
preshared authentication
the Encryption
md5 hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
preshared authentication
aes-256 encryption
sha hash
Group 1
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
Telnet timeout 5
Console timeout 0
management-access inside
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal BACKDOORVPN group policy
BACKDOORVPN group policy attributes
value of VPN-filter 11
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelall
BH.UK value by default-field
type tunnel-group BACKDOORVPN remote access
attributes global-tunnel-group BACKDOORVPN
address pool Admin_Pool
Group Policy - by default-BACKDOORVPN
IPSec-attributes tunnel-group BACKDOORVPN
IKEv1 pre-shared-key *.
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
Excellent.
Evaluate the useful ticket.
Thank you
Rizwan James
-
Since then, she hasn't needed InDesign and I would like to move to my computer but cannot access his old email. Support is a joke (running around in circles). How can I get this on my machine? I have all the files download, she had.
Legally, you can't transfer a teaching license.
-
ReadyNAS Duo v2 found by Raidar, but cannot access
I moved last week and when I created my readyNAs to the new location with a new ISP, Raidar sees the diveice, it's IP address, mac address, hostname etc but I cannot access it somehow. Any suggestions?
Thanks a lot, StephenB and all other respondents. Had the SIN back tonight and very happy!
-
1st, I tried almost every fix suggested on this relatively common problem with no joy. It is not a virus, unless it's something very new not found by all the usual scanners.
Only way to access the programs EXE is to run the command prompt by going to with CTRL - tour of the new task (run) in the Task Manager menu and then navigate to the appropriate directory and run the program from the command prompt. Run virus checker and run various registry fixes recommended here with no joy. Safe mode does not help with the launch of the EXE.
Because I get the 'Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item. When I try to run an exe from a link, I think I have lost the user privileges. But, since I can't change the accounts of users or the restore, I can't try to do anything there.
This problem occurred after uninstalling several old unused programs followed by performing a disk defragmentation. (everything is done using Microsoft System Tools). PC worked after doing these things in vain after the next reboot.
Curiously, I CAN start the web browser from the start menu to post this message.
Another clue: I can't start programs by clicking on them, but I CAN run the program by opening a file type associated with this program, i.e., opening a file named text.doc will cause Word to open.
I am a fairly experienced user, but I'm stumped. Any suggestions?
Found solution...
Looked user accounts change program but cannot find or identify it was so impossible to try it.
I was finally able to identify (in trial & error) the restore program and run it using the command window.
The program (rstrui.exe) was found in C:\Windows\System32\Restore\rstrui.exe
I was able to run and to restore to a date when this problem started and that fix. Still don't know what was the problem of the root but happy to be able to fully use this PC back again.
Thank you to everyone who made suggestions. -
CAN OPEN & EDIT FILES, BUT CANNOT BE SAVED ON THE NETWORK PC (WIN7 - WINXP)
Hello.
1. I can open and edit a file in the main pc (Win7) pc (WinXP) another, but I couldn't save it. When I try to save an alert box pop up saying that the file I want to save is read-only.
"" file.xls"is read-only. To save a copy, click OK, and give the workbook a new name in the dialog box save as. "
How do I fix this so I can save it in the original location?
--------
2 - in the main pc (Win7). I try to create a new docs but it wont.
"Cannot create the file 'New document texte.txt'. Access is denied. "
--------
3. not copy a file of pc (Win7) main pc (WinXP).
"Source file: C:\xxx\User\My Documents\yyy.xls"
Target file: Z:\xxx\yyy.xls
The system cannot find the specified file. "Help, please.
Note: WinXp pc is connected to the Win7 pc across a network.
Hi Laurent,.
Thanks for posting your question in the Microsoft community forum!
I understand that you have a problem with the opening and editing of files on the network in Windows 7. I will try to help you with this.
(1) did you make any changes before the show?
(2) you are the administrator of the computers?
(3) are protected files?
Advanced sharing permission
1. in Windows 7, right click on the shared folder and then click Properties.
2. click on the sharing tab, click Advanced sharing. Check this file share.
3. click on the permissions button, click Add.
4. highlight the account that you want to share this folder to (name of account that will have access to the file), and then check the box allow for total control.
5. If the name of the account is not listed, please click on the Add button. Type everyone, and then click OK.
6. click on all members of the list of users and check the allow full control check box in the "Permissions for everyone" pane and click on apply, click OK.
See the link below and follow the steps to set up a home network. You can set up a network between your two computers and share files between them.
Share files:
http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone
"Access denied" or other errors in the access to or work with files and folders in Windows
http://support.Microsoft.com/kb/2623670
File sharing essential:
http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials
http://Windows.Microsoft.com/en-us/Windows7/share-files-using-the-public-folders
Sharing of files and printers
Please let me know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.
-
DynDNS is online but cannot connect from the external network
I've set up DDNS the modem. IP is available but I can't connect external network.
Hello
Thanks for posting your query in the Microsoft Community Forums.
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro
It will be useful.
Let us know if you encounter problems under windows in the future. We will be happy to help you.
Maybe you are looking for
-
Hello I'm looking for help to create a different script plugin noon to assign an output of Midi channels for each note played in a rope. I did it in the Middle Logic Pro with these objects, but would like a more effective use for Member States. Thank
-
I can't open the files in the downloads menu
Whenever I have download a file (open or save), it never automatically opens, and I can't open it by clicking on the entry in the downloads/Panel menu. I can't 'Open containing folder' and use the file normally from there, or go to the library and do
-
When I download Internet Explorer Favorites I get only the first two follders (20 or more)
I followed the instructions in the help file and tried downloading three times with the same result.
-
Satellite A500 getting hot all day
Hello My Satellite A500 hot every day and stop every two days.Where is the vault and what can do? GreetingSchaumi
-
Cannot complete the Windows XP installation.
After a problem started that I could not fix, I formatted the drive C. Unfortunately, I then started to install windows xp on a disk that I don't have the correct product code. Therefore, I can't past the Setup screen to halfway. Now I have the corre