PCI/4070 Flexdmm with Windows 7
See the datasheet shows Vista/XP Compatible and has been wondering if puts up-to-date or another gives Windows 7 compatibility? Thank you
The latest NI-DMM driver is version 3.0.5 which will work with the PXI/PCI-4070 and works with Windows 7. It is available for download here:
NOR-DMM 3.0.5-Windows Server 2003 R2, 32-bit/XP 32-bit/Server 2008 R2 64-bit/Vista/7
Hardware devices (DMM) to support the hardware and the software requirements are listed in the Readme of the driver download page.
Tags: NI Products
Similar Questions
-
PCI-DIO-32HS on Windows 7?
Hello
Is it possible to use the PCI-DIO-32HS with Windows 7? If so, can you direct me to the correct driver to install?
Thank you.
Hi aaron.cramer
There is a traditional DAQ driver for Windows 7. The driver does not work for 64-bit operating systems.
This link describes the limitations of the driver and download links: http://digital.ni.com/public.nsf/allkb/8EC9E81C3DE4E619862573930083BD7A
-
PCI-7334 with windows 7 possible?
Hello
The specification says that the PCI-7334 is for windows NT / Windows 2000/XP, is it possible to work in windows 7 or vista? I want to give it a try.
Thank you!
Hi thitchen007,
It will work with Windows 7 and Vista, you need just the right software. The 7334 uses the NO-Motion software. Later, NEITHER Motion will work with Windows Vista and Windows 7. It will also work with LabVIEW 2010 and later versions. You can download the evaluation here: http://www.ni.com/gate/gb/GB_EVALMOTIONASSIS/US
-
The PCI-6010 of is compatible with Windows 7 (32 or 64)?
I'm hoping to get a quick response because I need right away by the operating system and I do not know if will work with Windows 7, and if so, what matter if it is a 32-bit version or 64-bit Windows?
Thank you
Tim
Hi Tim,.
The unit will work with Windows 7. If you take a look at the readme file for the current version of DAQmx (9.2.3), you can find the PCI-6010 in the list of devices fully supported.
There is also a much smaller list in the Readme of the devices which only is not supported under Windows Vista/7, as well as devices only support for 32-bit versions of these operating systems. Fortunately, the PCI-6010 is not one of these devices.
In addition, I can confirm that I used the PCI-6010 with 32-bit versions and 64-bit Windows 7 (I have my test machine reimage quite frequently).
Best regards
-
Can I use PCI-MIO-16-4 with windows 7
I'm still on windows XP, but will be upgrading to windows 7. Can I still use PCI-MIO-16-4.
I guess not. I don't see where he works with DAQmx and the NOR-DAQ (now called traditional DAQ) is not compatible with Windows 7.
-
400 proOne G2: BSOD when I sysprep ProOne 400 G2 with Windows 10
Hello
I have a question I've been working on these past few weeks with no result. I have two HP ProOne 400 G2 that makes Blue Screen of Death, whenever I have run Sysprep on them. I got installed and sysprep with Windows 8.1, but with Windows 10 computers it crashing whenever I try.
PRIMARY_PROBLEM_CLASS: 0x124_GenuineIntel_PCIEXPRESS
I assume this has something to do with a bad driver for a device connected to the BUS PCIExpress, but don't know what to do from here.
I get the following in my analysis of the BSOD:
Windows Kernel Version 10586 MP (2 processors) 10 free x 64
Product: WinNt, suite: TerminalServer SingleUserTS
By: 10586.0.amd64fre.th2_release.151029 - 1700
Computer name:
Core = 0xfffff801 '02e7f000 PsLoadedModuleList = 0xfffff801' 0315dcb0
The debugging session: Wed Jan 14 11:35:23.343 2016 (UTC + 01:00)
System Uptime: 0 days 0:27:03.005Ebugging details:
------------------DUMP_CLASS: 1
DUMP_QUALIFIER: 400
BUILD_VERSION_STRING: 10586.0.amd64fre.th2_release.151029 - 1700
SYSTEM_MANUFACTURER: HP
SYSTEM_PRODUCT_NAME: HP ProOne G2 400 20 inch Touch AiO
SYSTEM_SKU: L3N70AV
BIOS_VENDOR: HP
BIOS_VERSION: N13 worm. 02.02
BIOS_DATE: 12/11/2015
BASEBOARD_MANUFACTURER: HP
BASEBOARD_PRODUCT: 8063
BASEBOARD_VERSION: KBC Version 05.26
DUMP_TYPE: 2
BUGCHECK_P1: 4
BUGCHECK_P2: ffffe00025cbc038
BUGCHECK_P3: 0
BUGCHECK_P4: 0
BUGCHECK_STR: 0x124_GenuineIntel
CPU_COUNT: 2
CPU_MHZ: b58
CPU_VENDOR: GenuineIntel
CPU_FAMILY: 6
CPU_MODEL: 5th
CPU_STEPPING: 3
CPU_MICROCODE: 6, 5, 3, 0 (F, M, S, R) GIS: 49'00000000 (cache) 49'00000000 (init)
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
Nom_processus: svchost.exe
CURRENT_IRQL: 5
ANALYSIS_SESSION_HOST: TNI - PC2
ANALYSIS_SESSION_TIME: 28/01/2016 09:26:11.0835
ANALYSIS_VERSION: 10.0.10586.567 amd64fre
STACK_TEXT:
ffffd001 'a3529e08 fffff801' 02e41f1f: 00000000'00000124 00000000'00000004 ffffe000'25cbc038 00000000' 00000000: nt! KeBugCheckEx
ffffd001 'a3529e10 fffff801' 0308fe88: ffffe000 ' 25cbc038 ffffe000 '25d0ca98 ffffe000' 25d0ca98 ffffe000 ' 25d275c0: hal! HalBugCheckSystem + 0xcf
ffffd001 'a3529e50 fffff800' acb08838: ffffe000 00000000'00000750 00000000'00000000 ' 25d0ca04 ffffe000'27994010: nt! WheaReportHwError + 0 x 258
ffffd001 'a3529eb0 fffff800' acb015c2: ffffd001 ' 9eff6c80 ffffd001 'a3529f50 ffffd001' a34f1180 ffffe000 ' 24add200: pci! ExpressRootPortAerInterruptRoutine + 0x24c
ffffd001 'a3529f10 fffff801' 02e83387: ffffd001 '9eff6c80 00000000' ffff6dd1 00000000' 158aa449 00000000'00000010: pci! ExpressRootPortInterruptRoutine + 0 x 22
ffffd001'a3529f70 fffff801'02 fc 2168: ffffd001 '9eff6c80 ffffe000' 27a 49040 00000000' 000001ba ffffe000'27414440: nt! KiCallInterruptServiceRoutine + 0 x 87
ffffd001 'a3529fb0 fffff801' 02fc23f7: 00000000'00000000 00000000'00000001 fffff801 00000000' 0000002f'0319 c 180: nt! KiInterruptSubDispatch + 0 x 108
ffffd001 'a9ca5490 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiInterruptDispatch + 0 x 37STACK_COMMAND: kb
THREAD_SHA1_HASH_MOD_FUNC: 0e50fe8fa1ecf43925e43bd200d7bb6400cb19fc
THREAD_SHA1_HASH_MOD_FUNC_OFFSET: b3258f674ee33805ab3940241ac9889fab704dc3
THREAD_SHA1_HASH_MOD: 7ec0dd05e870653df55cacfdf5a6b10cad863ce2
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: GenuineIntel
Nom_image: GenuineIntel
DEBUG_FLR_IMAGE_TIMESTAMP: 0
IMAGE_VERSION:
FAILURE_BUCKET_ID: 0x124_GenuineIntel_PCIEXPRESS
BUCKET_ID: 0x124_GenuineIntel_PCIEXPRESS
PRIMARY_PROBLEM_CLASS: 0x124_GenuineIntel_PCIEXPRESS
TARGET_TIME: 2016-01 - 14 T 10: 35:23.000Z
OSBUILD: 10586
OSSERVICEPACK: 0
SERVICEPACK_NUMBER: 0
OS_REVISION: 0
SUITE_MASK: 272
PRODUCT_TYPE: 1
OSPLATFORM_TYPE: x 64
OSNAME: Windows 10
OSEDITION: Windows 10 WinNt TerminalServer SingleUserTS
OS_LOCALE:
USER_LCID: 0
OSBUILD_TIMESTAMP: 2015-10-30 03:15:45
BUILDDATESTAMP_STR: 151029-1700
BUILDLAB_STR: th2_release
BUILDOSVER_STR: 10.0.10586.0.amd64fre.th2_release.151029 - 1700
ANALYSIS_SESSION_ELAPSED_TIME: 6261
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x124_genuineintel_pciexpress
FAILURE_ID_HASH: {0aebd40d-d4c8-456d-b299-4fede7e8bf0c}
Best regards
Thomas
Best regards
Thomas
http://www.techwork.dkHello
HP has a solution for me and are working on a new BIOS to correct the problem of permanence.
Go to the configuration of the BIOS F10-> advanced-> System Options-> and uncheck 'allow PCIe/PCI SERR # Interrupt.
Then, you are able to run Sysprep without blue screen of death.
I see that HP has released a new BIOS version 02.03 last month. You might want to try everything first, but if not, try the above solution.
Best regards
Thomas
-
HY,
I have recently upgraded to Windows 10 and after that activation done a clean install of it. The pilots detected Windows itself, but there are 2 unrecognized drivers. The PCI express called like that.
I wanted to ask you if there is a tool HP that detect all my hardware components and download the proper drivers. Because the Nvidia card, I installed myself.
And another question, can I download old programs (such as Cyberlink, 7 zip, Hp Coolsense ect) 8.1 Windows system? (are they compatible with windows 10?)
Thank you and best regards
Please click the links provided which might come handy below
http://support.HP.com/us-en/document/c04758308
Hope this helps, for other queries in response to the post and feel free to join us again
* Click on the white button on the right to say thank you Thumbs Up *.
Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
Thank you
K N R K
Although I am an employee of HP, I speak for myself and not for HP
-
Hello
I'm having Probook 4540 s serial No.: 2CE3490RSG PRODUCT: FOX27ES #ABV WITH WINDOWS 8.1 64 BIT BLUE TOOTH DRIVER NOT INSTALLED PROPERLY I TRIED to INSTALL MEDIATEK SUDDENLY WINDOWS SOFTWARE GET CRASHED... PLEASE HELP ME TO CHOOSE THE RIGHT DRIVE
HARDWARE ID:
PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00
PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C
PCI\VEN_1814 & DEV_3298 & CC_0D1100
PCI\VEN_1814 & DEV_3298 & CC_0D11Hello:
Have you tried the latest version of driver Mediatek BT March 21, 2014?
-
Compatibility with windows 64 bit OS
Hi, we intend to upgrade our current computer, possibly to a multicore 64-bit with windows OS. Currently, we use C++ as a software platform on a 32-bit Windows XP for the following devices:
PCI-6534
PCI 6713
PCI-6071E
NEITHER 9205
USB 6501
Most of them use NIDAQmx as drivers of base level. These devices are compatible with OS (win 7) 64-bit?
Thank you
I have not checked all of your devices are covered, but you should start to look at here and here.
-
Original title: card video questions
My company adds two monitors to existing systems that are also running good XP and windows 7. Everything goes smoothly with the exception of one system using windows XP. I replaced the original video card (ATI DELL X 1300 128 MB VIDEO CARD in the PCI-E DVI TV-OUT) with nvidia GeForce 8400 GS and when I try to install the drivers through the disk, I get the following message: "Windows cannot read this disk. The disc's might be corrupted or it could be in a form that is not compatible with Windows. I flashed the BIOS, but still nothing. Do I need a different video card?
Hi TheRealBradB,
· The computer is on a domain network?
You can download and install the drivers from the nVidia GeForce 8400 GS video card for site.
GeForce 8400 GS video card
http://www.nvidia.com/page/GeForce8.html
You can run the Autodetect your GPU and check the drivers.
Also contact nVidia support for help on the issue.
NVidia support
http://www.nvidia.com/page/support.html
Hope this information is useful.
-
Problem with Windows XP takes a long time to start
Hello, I am running Windows xp3 House. I have a problem with my firewall loading Windows. It takes about 2 minutes to load and it is that nothing works (Avira antivirus, Lynksys wireless monitor, etc.) until it starts. Sometimes it loads immediately, and then it's not? Weird. In a search, I found this, http://support.microsoft.com/kb/823612 I ran it.
He stopped and not responding so I had to turn it off and restart it manually. When I did I got a pop up telling me to activate my Windows, 3 days to activate. I did nothing to mess with windows, it has been installed on my pc when I bought it used and I have no cd or manual as I assume that it is installed at the factory. I know not where the i386 file is and have never been able to actually identify because I'm familiar with it. If my pc becomes unusable because of that I won't be able to use it and I don't know what to do. I did a system restore and it did not work. How to activate Windows if I must / I have to? How can I stop it? I don't know what to do and I need help. Thank youDell Computer Corporation Dimension 4600Windows XP Edition Service Pack 3 familyAVIRA Desktop Version 12.3.0.15Linksys Wireless-G PCI adaptPiriform Ltd - CCleaner Version 3, 20, 0, 1750SUPERAntiSpyware Version 5,GlarySoft Ltd. - Glary Utilities Version 2.46Malwarebytes Anti - Malware Version 1.60.0080GlarySoft Ltd. - Glary Utilities Version 2.46It is quite possible that all your problems are due to this dangerous program!Of course, any software can have a phenomenon of chance but, I have been using Glary Utilities for years and have never had a single problem.
To the OP
Malwarebytes Anti - Malware Version 1.60.0080
I guess you use Malwarebytes as a scanner at the request since the version you list is obsolete. There are several malware that can cause false activation. My advice to you is first, make sure your computer is not infected. To do this you must first update Malwarebytes and run a full scan. Once that is completed and you have deleted everything which, on the contrary, that was detected you should do the same with SuperAntispyware. View your results.
On another note, by the unlikely chance, you have the professional version of Malwarebytes and SuperAntispyware know you can't run both at the same time by using the real-time protection. As long as you use one of them as an on-demand scanner, you're ok.
-
I've seen others have posted simular questions, but I thought id repost this even in the case where there is more help. I have the Elite Phönix Pavalion h9-1150 desktop with Windows 7 Home premium 64-bit. and the bios HP 7.07 (seems no possible to upgrade the bios).
As others have had I install the new graphics card, the 960 Asus GTX card that came out last month and the system start gives about 3 beeps in about 30 seconds and then it goes to a screen that is black with a blinking cursor and nothing else happens. cannot enter bios or settings for HP...
I tried to disable UEFI boot devices in bios settings and enable only the legacy devices (after him swinging back on my original card, then move on to the new card), but it still gives 3 beeps after the start. However, I was able to get into windows. Although I think that this may be due to turn off the computer with the old card in without power first. and after 3 beeps (which always blocks you on the bios menu) sometimes it appears the window where you can select the safe mode or normal mode... as sometimes happens if you start your computer with windows 7 If you had just it off without turning off power or something. There, I can get into windows and run the PC and graphics card without problem, it's just when I try to start the problem happens.
and suppor HP no. is NOT a fault of the card itself. As much before. I bought an EVGA card earlier a GTX 780 and SAME problem happened (although I have not tried to remove it then devices boot UEFI)...
There is a problem of spacific with HP computers that seem to lock 'new' start-up equipment.
Honestly not be blunted. I really think it's bad what I read somewhere that even if HP would never say it they do it on purpose to prevent people ruin of guarantee or any "liabity' that occur by people any other hardware on HP computers inventory installation
makes no since to me. the PC SHOULD be able to run the card. in fact his race he now once I was able to circumvent the blocking (temporarily) check markers, everyhting is fine tracks of card 3 times faster then old (that should be the case).
But it's just this block as HP for some reason any installed on their bios/cards mothers is the question.
Good news is I got it from amazon and I have about a month, until I return. which I think this time I'll make. to see if something pops up in a month or something.
It's the ONLY solution, it seems that HP has officially to deactivate start secure Windows 8
but this isn't a computer of windows 8. and I guess even if install windows 8. the issue wouldn't disappear because given that its an older bios, there is no way to have a secure boot option to delete?
HP you really need to get on the ball and give us a straight answer on this subject. Is it ALL WAY to solve this problem? Can you not just do an older BIOS update to allow this? Or do you simply not want to worry about old PCs?
anyway I think that it is wrong and very frustrating and to be honest. If this is the case when my pc otherwise MUST run on demand
It's a PCI express 16 x slot card that is 3.0
Here are the specifications of deetailed according to the guidelines of your page
http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03273835
the card SHOULD WORK fine. I thought the GTX 780 was a little too much for the PC as he had more then a six pin port and needed a little more power, so at first I thought it was the question. so I returned it. and has now got this new card.
However, the ASUS GTX 960 map requires the SAME power that the card GTX 550 it by default and the SAME SIX connector
so it SHOULD work.
and performance tests indicate that it FACT it's just stupid... bios that asks the question.
I'm afraid to turn off the computer at the moment and try again to see if windows starts normally after you turn off the startup UEPI devvices because he cannot start properly...
HP you are one of the largest suppliers of computers you know technology what are YOUR computers. WHY cant you give us a direct awnser on this.
ITS VERY frustrating
and to be honest if I can't solve this problem, I am very hestient never buy another product HP if their spacifically computers have this new method of hardware locking.
because I have the card now works on my pc, it runs great! 3 times as fast as it should! and yet, I know in the back of my mind, if I can't understand this bad likely issue just to send it back... less I have time.
and for now, I did not have money to buy a new pc. This PC is JUST perfect for what I need for now another card then you want a little better...
He shoudnt be as much hassle there?
Thank you.
Hello
You need update the BIOS that is listed under Windows 8 to support the new graphics. You must upgrade to Windows 8 or temporarily install Windows 8, you can install the update to the BIOS. While there may be other ways to install the BIOS update, clearly having Windows 8 running will be the safest way. 8 BIOS version is your best chance to get the latest graphics cards to work.
You can Windows 8 Enterprise 90 days trial.
If you decide to install W8, then create external recovery HP Media and backup your data before doing anything.
The reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.
-
No sound while recording with Windows Vista
Hello!
Thanks in advance for the help!
I have a new 430 of XPS from Dell running Windows Vista Home Premium 64-bit.
I try to save and the external audio source (old audio cassettes) using audio recordings of Vista. I am inputing the audio using the socket "line in" on the back of the computer. The Visual meter shows a signal is present, and I can save, save and playback of the audio file after it is saved. The problem is that I can't hear any sound when recording from an external audio source. I check in 'Sounds' in the Panel, and in 'line' monitor shows it receives a signal (and the level is turned up), but nothing is heard in real-time. No speakers are silent. All the other sounds of the computer, MP3 and CD is heard without difficulty. When I do a check for speaker under 'Sounds', the speakers work fine. But I hear no audio registration until after I record the signal.
The computer is only 2 months old, and I've never been able to hear any audio registration in real time. This isn't something that just stopped working.
I also use Total Recorder 7.1 and I have the same problem. Total Recorder sees the external audio input signal and saves it. But I do not what I did until I have read the saved file. With Windows XP I always heard an external audio input as soon as I plugged the audio source, but so far it does not the same under Vista.
Device Manager tells me that my sound card and driver are operating normally.
Any ideas anyone? Is there a change in Vista compared to XP? Have they blocked the monitoring in real time because of some problems of conflicts or comments? I'm just guessing.
Thank you!!!
Dan
http://en.community.Dell.com/forums/t/19250187.aspx?c=us&l=en&CS=04&s=BSD
Solution seems to be to disable the integrated sound card and buy a PCI sound card. Good news is that they are cheap.
Just to be sure, it is the last driver I could find at Dell
I suspect the integrated sound card is not full duplex or the available driver is unable to drive. The first is my best guess.
So the bottom line is that you need a PCI Full Duplex sound card that works with 64-bit windows. The highest and digital sample rate 24 - bit is better, but I don't know it wouldn't be difficult to exceed the specifications on board. Rob - support element, Cascade Bicycle Club P.O. Box 15165, Seattle, WA. 98115-0165 206-522-3222-24 hr hotline 206-522-BIKE http://www.cascade.org
-
I have a new Dell Inspiron 3650 i5 preloaded with Windows 10 (which I love).
However, following a recent Wifi update keeps fading, disappearing all together and when the desktop is enabled it regularly unable to connect at all and can not find Wifi networks to connect to everything. If I let it run it ends by connects, but again fades to make internet surfing erratic and e-mail downloads of locking frequently. I know that is not the Wifi router because I have my old trusty Dell Inspiron laptop with Windows 7, sitting on the desk next to the office and its Wifi connection is absolutely beautiful and strong. I tried to uncheck the option as stated on some forums Windows 10 power saver but it makes no difference. I also noticed that my Google link no longer works (away from leading edge because I couldn't stand the ads / news feed.) Can someone help me as W10 came with the system Dell must be aware of the problem?
Open Device Manager, and then double-click the entry for your wireless card. Then click on the tab to acheck power management the box "allow the PC turns off... »
Then, open plan Windows Power options screen. Select the plan of the power currently in use, and then click the link to change its settings. In the next screen, click Advanced options.
Find the WiFi options in the list on the left and make sure that it is set to Max performance. Save the change in power management and reboot. See if that helps.
If the problem persists, you may go back to feeding and management on advanced under PCI Express settings screen, disable the link state power management.
-
Latitide D810 - lost all sound with Windows 7
Greetings!
I recently installed Windows 7 Professional on my Dell Latitude D810. After installation, I've lost all the audio features. My volume control in the Quick Launch bar States, "no Audio output device is installed". I ran the "problems of detection" to try and fix the drivers, but it wasn't able to fix it.
My next step is to check the drivers of Dell and downloads site and they do not have a driver for my computer with Windows 7. However, I have read on other sites that people have had any audio problems with installing Windows 7 on their Latitude D810s. Others have claimed to have had problems, but have been able to find the drivers for their audio problems.
Through various websites and download, I tried the following driver executables: D810_A05.exe, R99254.exe and S1wua01i.exe. It's audio drivers I found for XP and Vista, but they no longer work.
Does anyone else have other recommendations in pilot? Or links to other drivers, I can at least try?
At this point, anything would be helpful! A lot of satisfaction and thanks in advance...
See if it works:
Download driver Sigmatel R99254. Unzip it but cancel the installation process. (Skip this step if you still have this driver).
It will unzip the files and store them in a folder on the hard disk to c:\Dell\drivers\R99254, and this folder will be a subfolder named WDM.Open Device Manager and expand system down devices. Locate the PCI Device with one? next to it (or if it is not there, then look for "Multimedia Audio Controller"). Go to properties and select Update driver. Select to manually locate the driver and let Windows not seek.
Go to c:\Dell\drivers\R99254\WDMWith a bit of luck, it should detect new hardware, and one of them should be the Sigmatel.
Maybe you are looking for
-
VIZIO VTAB10008Running Android 2.32Adobe Flash 10.3
-
Card replacement Satellite A200 power
OK, so my adapter is dead, and I have a problem with finding a replacement. My adapter is 19V 4, 74 a, no Watt output is marked. And there are no adapters 4.74 A available in my country, the closest are 3, 95 a or 6, 3 a. On the Toshiba site I checke
-
OR USB-6211 is used to count climbing on board TTL
Hello I'm new to NOR-DAQ cards, and so before buying whatever it is would like to know if it is possible to use a device, NI USB-6211 County and bin amounting to edges of a TTL signal. What I want to do is to count how many rising edges of a TTL sign
-
I can't play yahoo games. I start and the chance to play for 2 minutes and he sends me on the desk.
-
Hello. I got error message "Unsupported Wireless Module" when I replaced the card MOBILE broadband with me936. ME206 (lt4114) was originally installed, but I found me936 (lt4110) is also supported in the manual. I don't know why it does not accept me