PCI-6251 - Acquisition on hard drive

Similar Questions

• connect labveiw 8.2 with nor pci-6251

  I have no pci-6251 and its cd driver with labview 8. How can I connect the daq with labview 8.2 and run programs

  Hello

  I can't download the driver of NOR-DAQmx 8.7.1, connect labview 8.2 with NOR-DAQmx PCI-6251...

  Why?

  Please answer...

• PCI Data Acquisition and Signal Processing controller driver

  I installed win 8.1x64 on my HP Probook 450 G2, but miss me the driver of PCI Data Acquisition and Signal Processing controller.

  Can you please help?

  Thank you

  Leontina

  Hello:

  Please see if installing the Intel Chipset driver installs this device.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20775 & lang = eng & ProdId = 816

• Z600 Workstation: workstation Z600 missing of pci data acquisition and signal processing controller driver

  I just installed Win7 Pro x 86 on my Z600 workstation.  It was an upgrade to Windows XP Pro.  I'm missing the driver for PCI Data Acquisition and processing of the Signal and Hardlock USB 1.02 controller in Device Manager.  Can someone help me find these drivers.  I looked on the page of Support/Drivers for this model, but could not find anything.

  Hello

  You can get assistance on the HP Enterprise Business Forum since you have a professional worktsation.

• Pavilion TS 17-g099nr: PCI Data Acquisition and processing of the Signal Windows 10 x 64 controller driver

  Hi, it is impossible for the moment to install the driver for PCI Data Acquisition and Signal Processing.

  I downloaded the driver from Intel, and it did not work... I found a version of this site for windows 8.1 unupdated and it does not work.

  A little help?

  Thank you!

  Hello:

  It could be one of two different drivers.

  Try this one first, and then restart the PC.

  This package contains the Intel Chipset Installation utility. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager. This package is provided for the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75561.exe

  If this does not work, try this one...

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75506.exe

• After installing the new hard drive and using recovery discs, I get this message could not start because the following file is m issing or damaged system32\drivers\pci.sys

  I just replaced my hard drive with a new because the other HD said imminent failure or something like that! Basically the hard drive was about to fail and I so now the new one installed and I used my recovery disks and all seemed well until the recovery disks have been completed and the computer says to get out them. Then the computer restarted several times and then I get this message:
  Windows cannot start because missing or corrupt the system 32\drivers\pci.sys
  Then he said: "you can try to repair this file by starting windows setup using the original configuration of the CD-ROM.
  Select 'R' in the first screen to start repair.
  one of the many questions I have is that CD-ROMs are talking? It is the recovery disk, they want me to or what? also if you know a CV or another page which includes help on this specific topic would also help! Thank you
  also, I can still use the old drive hard when it is installed on my laptop!
  HP pavilion dv5220us running windows xp
  I had advanced care system that had a top registry Fixer and I got ccleaner as well on the computer
  internet security Norton 2011

  Hello panjok2,

  Sometimes recovery CD are dependent on the architecture of a hard drive.  If it is different from the original disc, then we have problems.

  In this case, the best thing you could do is contact HP and see if this is the case.  If it is not why this happens, they should be able to help you as well because they are the ultimate authority on their recovery process.

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• PCI-6251 vs PCIe-6351

  Hi all

  In another thread here somehwere I spoke getting the smaller possible buffers to reduce latency when reading and writing to the acquisition of card data in a loop.  The "10% rule" came (i.e. setting the buffer size of e/s to 10% of the sampling rate of 100ms per buffer) and although it seems to work on most systems, on some systems, well I can do much better than this, reliable: I can do full Visual Studio 2010 then builds in this loop , using a few sizes of buffers of 20ms, without a single negative overflow error.  It's all about a card PCI-6251.

  I decided to see if I could do better with a PCIe-6351 surfboard, hoping all latency issues could be mitigated by the PCI express bus.  Unfortunately, things are much worse.  On the same system where using 20ms puts in buffer (at 100 kHz sampling) was the test of the bullets; for example I couldn't fail any load I put on the CPU (a quad core Xeon hyperthreading), using the same code with the PCIe-6351 could not even past the start of my loop of I/O without meeting many overflow errors.  I increased the sizes of buffer to 100ms (as recommended by the basic rule), but still have occasional overflow errors, even with virtually no load on the PC.

  Another question, I noticed during the transition to the 6351 that surprised me was synchronization; another application considerably depends on the sync input and output buffers. It worked well on the 6251, taking into account delays caused by the buffering.  The same code fails on the 6351; not with a code error, but tampons are not synchronized.  I did a thorough analysis of this yet (I put emphasis on the first problem above), but it seems that the IO can be synchronized by a partial buffer; in any case, the behavior is quite different, questioning reports cards of the same physical buffer size in each case, using DAQmxGetBufOutputOnbrdBufSize.

  I'm not sure what my question is, except, "huh?"  The biggest difference that I could find on the sheets, is that the 6351 has several DMA channels, which could only help (although I don't think I need more than what's on the 6251).  If someone could shed some light on that, I'm all ears.

  (It was all done using the 9.3.5 drivers supplied with the PCIe-6351;) I don't have the time to go through the pain and suffering that is updated to the NOR-DAQ drivers yet - my company has limited bandwidth and, let's face it, 1.3 GB for a simple driver update is ridiculous, not to mention the time it takes actually install.)

  Hi, JSA,.

  Take a look at your other thread, my first suggestion is to disable the regeneration on your output task.  In c#, use the following text:

  myTask.Stream.WriteRegenerationMode = WriteRegenerationMode.DoNotAllowRegeneration;

  WARNING 200015 can only come when you use regeneration, and it occurs when you copy data on the same portion in the output buffer that the device is being read.  It does not necessarily indicate that an overflow would occur with disabled regeneration.  If you have enabled the regeneration (which is the default) then the unit will try to keep its edge FIFO (8191 samples) filled with data that is currently in the output buffer, so you could get the additional data transferred to the device before you have a chance to replace the previous buffer.

  In addition, you mentioned that "i/o can be out of sync by a partial buffer."  While I don't have too much to go here, I wouldn't be surprised if regeneration disabling fixed this problem as well.  If you transfer a partial buffer of data to the device, and then write the new data, your output waveform may appear out of sync with where you expected it to be.  It is best to simply disable the regeneration, in which case the output buffer is treated as a FIFO, and not a circular buffer, so you're never more than expected.

  Once you disable the regeneration, you will no longer receive WARNING 200015 and I believe that potentially you will not see the synchronization problem.  If the loop of Scripture cannot meet the generation, you will now see 200290 error, which is a mistake of underflow true (i.e. no data is present in the FIFO shipped on time the sample clock is received).  If you encounter some errors-200290 rates and sizes of memory buffer that you think are unreasonable, please do after return and I will be happy to take a look at your code to see if what you see is logical.

  Best regards

• Blocking of blue screen with the analog voltage (WinXP, PCI-6251)

  Hello

  I'm looking to solve a problem of blue screen with my measure blocking
  application, which I am developing with C++. Blocking seems manifest
  a little random after a variable amount (500-50 000) of voltage analog
  measures. My application needs to make a huge amount of these digitally
  trigger voltage measures after a certain period of time, and I'm using a
  unique
  task to do. The task is stopped and started after a single measure
  is
  which is done around 10 000 - 100 000 times per second. For this
  because I do synchronized with the PCI-6251 map data acquisition and
  one
  Ztec oscilloscope card. It seems that the probability of blocking could be
  associated with
  the frequency of measurements of voltage that I perform.

  The
  the app itself is multithreaded, but I'm blocking concurrent access
  TO
  the card with lock - all access to the card are behind a single mutex

  lock, so simultaneous access is blocked. In any case, all data acquisition
  access
  o the map is initially a single thread, which is dedicated to the acquisition of data
  operations.

  I also did stress tests with Ztec scope map, which does not
  result
  in all the problems. I also disabled in order of acquisition of Ztec map data
  TO
  Make sure that it wasn't the card scope, the origin of the problems - the problem
  persistent, so this seems to point towards the direction of the nidaq map.

  The deadlock appeared when I used the original supplied with drivers
  the
  card. I installed the latest drivers (removed the device from)
  ' Windows
  Device Manager and your application Measurement & Automation, reinstalled), but the blue screen still appears.

  Blue screen gives me a few debug data, but it does not mention any

  files .dll or something that would be of course point to a specific file (driver). I enclose at least partially matching code snippets.

  Hello again! I've been in contact with a local support person, who suggested that I have use DAQmx_Val_FiniteSamps instead of DAQmx_Val_HWTimedSinglePoint. I don't have any other changes, but this (see below) and the problem disappeared, so this seems to be an acceptable solution, because I don't see at all why not do this way. (Thanks Henry!)

  DAQmxErrChk (DAQmxCfgSampClkTiming (task_reader, NULL, 100000.0, DAQmx_Val_Rising, DAQmx_Val_HWTimedSinglePoint, 1));
  DAQmxErrChk (DAQmxCfgSampClkTiming (task_reader, NULL, 100000.0, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, 2));

• Missing PCI Data Acquisition and Signal Processing controller drivers

  Hello!

  I have a problem with my Inspiron 11 3148
  Service etiquette: CSFND32

  A few weeks ago, I did a clean reinstall of windows 8.1 using a .iso downloaded from microsoft technical support and put in level to windows 10 in a short time after.

  I don't have my thumb drive installation, where the microsoft .iso image file.

  Since then do a clean install, I had a few questions I'm going to break my best.

  1. lack of drivers for unknown devices & a PCI data acquisition and signal processing controller.

  I had some problems with wifi, so I looked in the Device Manager to check if my card needed a driver update and discovered several other device driver errors, which cannot be resolved by using windows update. The card wifi itself says it is updated.

  

  I tried to use the dell service detect downloaded applet on the page of the Dell driver IE, but it does not seem to function.

  If someone can identify what (s) I might need for these unknowns that would be fantastic.

  2. Wifi issues, perhaps in connection with the missing drivers above.

  -Sometimes does not detect networks.

  -Sometimes cannot connect to the internet when it is on my home network.

  -Is not able to connect to weak points where before he could.

  * Reset the network adapter in the network settings fixes detection and connectivity issues, but does not improve the detection of signals in weak points *.

  3. high (100-96%) HARD drive load for a few minutes after start high and very occasional errors "in areas not paginated page failure."

  -J' lived load disc high enough the last time I got the upgrade of 10 windows the first time, requiring often 5-10 minutes to settle at startup

  -Second time around, I always get high disk load, but it is not too long. The upgrade fee is very 'light', I have very few programs installed and even less to launch at startup.

  -Defects of Page seemed generally coincide with me shortly after you start using Google Chrome. I now use firefox instead and have known only one mistake so far since the permutation

  * I used the windows disk check and ran chkdsk /r for longer check disk to reboot, but both are no problem with the drive *.

  Ok... So usually after I finished writing this post, I came across a solution for the number one problem while browsing the microsoft answers forums.

  I downloaded and installed a driver for the Intel platform dynamic and thermal framework.
  -This solved my problems of missing driver.
  -J' rebooted several times and I am not also problems of wifi the day other than the problem of low task, but what I'll take it!

• What can I put the RAM and the hard drive of a Macbook Pro 13 "2014 in a Macbook Pro 13" 2016?

  The main logic of my Macbook Pro 13 "2014 card is broken, and it turns out that it will be much easier and just slightly more expensive, buying a new Macbook Pro that, in order to replace. I would like to set up my new Macbook Pro 13 "online in a way such that it is as cheap as possible, while always respecting the level of my former. So, if I could order one with the minimum of RAM and disk space hard and then put these pieces of my old in the new, this would be ideal. I don't know so much about it, and the question is: is it possible?

  my old Mackbook Pro 13 ":"

  -purchased new August 2014

  -3.0 GHz dual-core Intel Core i7, Turbo Boost up to 3.5

  -DDR3L 16 GB 1600 MHz SDRAM

  -Storage flash 512 GB PCIe

  -Intel Iris graphics card

  I'll get to buy e new generation Mackbook Pro 13 "with:"

  -2.9 GHz i5 or i7 3.1 (I've not yet decided)

  -RAM: Here I want to configure it with as little as possible, if I can just put the chips of the old in the new. Is this possible?

  -Hard drive: same thing: if possible, I want to get the cheapest option and simply put the old in the new. Possible?

  Thank you in advance to anyone who might take a few minutes to help out me! It would be much appreciated!

  •

  The RAM is not transferable, and the reader will be not as fast as the original of the newest computer; In addition, change it the warranty of the news of the computer.

  (143318)

• OMEN of HP - 17-w151nr: hard drive and HDMI

  Does anyone know if this Omen with GPU 1070 model has an HDMI with HDCP 2.2 2.0 port. and if there is a secondary dwelling unit to a hard drive (outside the training standard PCIE 512 GB M2)?

  Thank you for your help. A single command aspire media hard drive from HP?

• HP OMEN 15 (new style): I want to buy an OMEN of HP, but HP makes it difficult to understand this situation of HARD drive.

  I spent the last hour trying to understand it and I hope someone here can answer my question.

  If I configure and buy a harbinger of 15 HP with 16 GB of RAM and 512 m 2 GB PCIe SSD NVMe fully spec'd with the best i7 and 965 m 4 GB, I'll be able to add on an extra HDD as a secondary drive? I don't care if it's mechanics or SSD for high school, but if I buy an omen of HP configured with just the m2 PCIe NVMe SSD can later, I add to the system or will I be returned on a single hard drive internally for ever?

  I found a lot of configurations all over the internet, but no details, so I decided to say F #@! He and just build a machine from HP directly and know exactly what is inside, information is not really available anywhere and I get why, it cancels a guarantee to change a system, but the information readers still my decision to buy a machine that I can update or not.

  I know I can buy their free model labelled 'value' with the 1 TB or 2 TB + m2 SATA SSD but that term kind of scares me in a computer in this price range and SATA has been pretty slow for standards with the 128 GB SSD SATA SSD drives. HP also seem to leave no mention that it is SATA on the page of product information, that I found convenient.

  So is there someone who has successfully added a secondary drive to the only version m2 512 GB PCIe SSD NVMe? Or someone who has added a M.2 SSD PCIe to one of these models 'value' that pair the 5400 or 7200 RPM with a SATA SSD of m2? This stuff m2 is kind of a blur without real reason.

  The real sales staff seemed confused that I even asked on a hard drive...

  

  

  Have you ever seen the Manual:

  Repair manuals

  A couple of things stand out. The slot for the WSSD m2 drive can take a SATA or a PCi-e version. There is only one slot m2 and you have the opportunity to each of the types of player, so that they are interchangeable.

  See page 33. The m2 slot is just to the left of the battery. The drive Bay is above the right side of the laptop battery can physically handle both types of readers at the same time.

  The big problem is that the hard drive rails (in brackets) are "not spared." Page 18. This means that you can not order from HP. You might find a third-party provider who has but, seriously good luck with that.

  So I think you'd better get one of these:

  1 TB hard drive (7200 RPM) 9.5 mm + 256 GB SSD PCIe NVMe TLC M.2

  OR

  1 TB hard drive (7200 RPM) 9.5 mm + 128 m 2 GB SATA - 3 SSD (value)

  If you do not order it with a 2.5 inch SATA hard drive, it is not possible to get the parts to add one in. If you are happy with a 256 GB PCIe, then the first configuration will be fine. I have a G3 15 Zbook which has a similar setup, and I got a 2.5-inch SATA SSD 512 gig in the hard drive Bay and then a m2 of Samsung PM951 NVME (pci-e), which is the boot drive.

  http://www.Newegg.com/product/product.aspx?item=9SIA12K3GB5852 & nm_mc = KNC-GoogleMKP-PC & cm_mmc=KNC-GoogleMKP-PC-_-pla-_-Solid+State+Disk-_-9SIA12K3GB5852 & gclid = CJigudCl284CFQ8vaQodteABuw & gclsrc = aw.ds

  I have the 256 GB version, but most high is 512. The combination gives me lots of storage (for me)... 3/4 gig and the drive of NVME m2 is quickly sick. For you, a 1 TB hard drive 7200 RPM and then a NVME m2 could be just the ticket. If you get the second configuration, you can run the 128 gig SATA m2 (of a perhaps $ 50 retail value) and replace it with a model IS 512.

  Although technically only an authorized technician is supposed to remove the back cover, it is not hard to do and you can probably (no guarantee) do it without voiding the warranty.

  Post back with more questions.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Toshiba 320 GB USB 2.0 HARD drive freezes computer

  I just bought a Toshiba 320 GB USB 2.0 HARD drive and every time I try to transfer the data of light go red after 20 seconds and the computer crashes. The only way I can sort is by turning it off at the wall. The HARD drive works fine via a USB1.0 port and other devices like printers etc joysticks work fine through my USB 2.0 Pci card, but not my HARD drive, any ideas what this could be?
  Thank you

  Hello

  You can also try to use the USB1.0 port. But if you want to use data transfer high, you can try to use the firewire port. Using Firewire USB2 adapter for example.

• Pavilion HPE - 533 sc: installed new graphics card. Hard drive stops

  In order to improve my graphics performance for games that I invested in this graphics card:

  NVIDIA gtx 950, links shows the map and specifications:

  http://gadgetsngaming.com/2015/08/21/nVidias-GTX-950-at-160-easily-beats-750ti-in-1080p-gaming/

  How fitting the screen stops at initial HP logo and "press ESC to start menu.

  I can also clearly see that disk hard fails or starts the Windows 7 Edition operating system home premium.

  I am running Nvidia GT 630, and back on this card machines works well again.

  It just loks like the new graphics card prevents the hard drive to run.

  All attached cables (power cable 6 pin) and locked firmly into the PCI slot.

  Is it possible that the new card draws so much power that it prevents the hard drive of the race?

  When you press ESC, it seems that the hard drive is registered in the Bios.

  This nvidia gtx 950 is better? It seems to be more the size of the one I have - nvidia GT 630. Link shows specifications.

  http://videocardz.com/NVIDIA/GeForce-900/GeForce-GTX-950

  *

  First of all try to help me, please do not write that I should get a new machine - I thought that, despite this current have worked without any problems for 5 years now.

  Do not forget that I have to install a lot of programs and to transfer other data - it would be nice to avoid this.

  If if can not be fixed - which stationary HP desktop computer (I have a laptop) can have the new nvidia gtx 950 mounted?

  http://store.HP.com/us/en/PDP/desktops/HP-envy-Phoenix-810se-desktop-j6n64av-ABA-1

  or this

  HP Pavilion Desktop-500-585no

  Thanks in advance

  I'm not familiar with current PC for sale, regarding upgrades.  Since is considered a new HP, try looking at the list of options on the HP website.  Most higher end PC have the options that you choose before buy you, to customize the generation.  Choose a model with options that match your criteria now and notice the upgrade options - write down them - to avoid confusion later.  OR go with a customized version, but this could mean significant spending.  It is the hand off the coast between prebuilts and personalized.

• Satellite A205-S5880 (PSAE3U) downgrade Vista to XP - does not detect HARD drive

  Hi all
  I got this hair loss situation, I had a satellite A205 - S5880 (PSAE3U) and decided to downgrade to XP, I got all ready drivers for XP (I have the EMEA support site and the wireless from a Czech website), I have my windows XP SP2 g CD and I get after loading everything Since the CD that my HD is not detected or not recognized and it tells me to make sure I have connected (I know I do).

  After doing a search of loong on the web, I discovered I have need the drivers (or something like that) to my HD which is a Hitachi HTS542520K9SA00 ATA Device (200 GB, 5400 RPM, SATA). My bios won't let me put my SATA to IDE (or something like that) also to update and nothing, please I need my Windows XP CD to read my HARD drive, and I can take care of the rest (at least I think so, otherwise I'll ask again: D).

  I also found that I can watch my motherboard chipset for motherboard for my HD controller, it ' s (i think) a toshiba ILHAM v1.00 or Intel Crestline - GM GM965.
  Maybe this info also works: Intel ICH8M

  I would totally be apreciate all the help, thanks in advance. I am able to give any other information you want
  in any case here is a summary of my pc with everest
  ================================================== ================================================== ========================
  SUMMARY OF EVEREST
  ================================================== ================================================== ========================
  Computer
  Computer Type ACPI (Mobile) 86 x PC
  Operating system Microsoft Windows Vista Home Premium
  OS Service Pack Service Pack 1
  Internet Explorer 7.0.6001.18000
  DirectX DirectX 10.0
  Computer name USER-PC
  Name of the user
  Domain logon user-PC
  Date / time 2009-05-02 / 21:37

  Motherboard
  CPU type Mobile DualCore Intel Pentium, 1866 MHz (14 x 133)
  Card mother name Toshiba Satellite A205
  Motherboard chipset Intel Crestline - GM GM965
  Memory system 3061 MB (DDR2 - 667 DDR2 SDRAM)
  DIMM1: Micron Tech 16HTF25664HY-667E1 2 GB DDR2 - 667 DDR2 SDRAM (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
  DIMM3: Hynix HYMP112S64CP6-Y5 1 GB DDR2-667 DDR2 SDRAM (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
  Type of Phoenix BIOS (15/05/08)

  Display
  Video card Mobile Intel (r) 965 Express Chipset Family (448 MB)
  Video card Mobile Intel (r) 965 Express Chipset Family (448 MB)
  Accelerator 3D Intel GMA X 3100
  Monitor monitor generic PnP [NoDB]

  Multimedia
  Audio adapter Realtek ALC268 @ Intel 82801HBM ICH8M - High Definition Audio Controller

  Storage
  Controller IDE controller Intel(r) ICH8M SATA AHCI - 2829
  Controller IDE Intel(r) ICH8M Ultra ATA Storage Controllers - 2850
  IDE controller Texas Instruments PCIxx12 Integrated FlashMedia Controller
  Storage controller Microsoft iSCSI Initiator
  Hard drive Hitachi HTS542520K9SA00 ATA Device (200 GB, 5400 RPM, SATA)
  Optical drive MAST * a DVD-RAM UJ-850 s ATA Device (DVD + R9: 4 x, DVD - R9:4 x, DVD + RW: 8 x / 8 x, DVD - RW:8 x / 6 x, DVD - RAM: 5 x, DVD - ROM: 8 x, CD:24 x / 16 x / 24 x DVD + RW/DVD-RW/DVD-RAM)
  Hard disks SMART Status OK

  Partitions
  C: (NTFS) 125915 MB (102380 MB free)
  D: (NTFS) 64863 MB (12885 MB free)
  Total size 186,3 (112.6 free go-go)

  Entry
  Standard PS/2 keyboard keyboard
  Alps Pointing-device mouse

  Network
  Main IP 192.168.0.199
  00-1B-9E-FB-8B-DF main MAC address
  Atheros AR5007EG network (192.168.0.199) adapter wireless network card
  Realtek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.0) network card
  TOSHIBA Software Modem modem

  Devices
  Printer Microsoft XPS Document Writer
  Printer send to OneNote 2007
  Controller FireWire Texas Instruments OHCI Compliant IEEE 1394 Host Controller (PHY: TI TSB41AB1/2)
  USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
  USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
  USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
  USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
  USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
  USB2 Controller Intel 82801HBM ICH8M - USB2 Enhanced Host Controller
  USB2 Controller Intel 82801HBM ICH8M - USB2 Enhanced Host Controller
  USB camera Chicony USB 2.0 Camera
  USB device USB Composite device
  Battery Microsoft AC adapt
  Battery Microsoft ACPI battery compatible control method

  DMI
  Provider DMI BIOS TOSHIBA
  DMI BIOS Version V5.60
  TOSHIBA DMI system manufacturer
  DMI system product Satellite A205
  DMI system Version PSAE3U-08C023
  DMI 68221541 K-system serial number
  DMI system UUID EA88852C-3BD111DD-968C001E-EC3CB59A
  DMI Motherboard manufacturer TOSHIBA
  DMI Motherboard product ILHAM
  DMI Motherboard Version 1.00
  DMI Motherboard Serial number 0123456789AB
  TOSHIBA DMI chassis manufacturer
  DMI chassis Version n/a
  DMI chassis serial number, no
  DMI chassis asset tag *.
  DMI chassis Type Notebook

  ================================================== ================================================== ========================

  Hello!

  You will find hundreds of discussions here in the forum about this, if you install Windows XP and Vista from a Microsoft disc and the HARD drive can't be detected... So he s strange to read these questions again and again.

  However, to install Windows, you need the SATA drivers or let's say the Intel Storage Manager package. It contains the driver you need. You can then create a new installation using nLite [www.nliteos.com]
  Or look you at this Toshiba document: http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm

  Good bye