Similar Questions

• Maximum latency to read/write for PCI-DIO-32HS with NOR-DAQmx?

  I was asked to evaluate using the PCI-DIO-32HS and NOR-DAQmx on MacOS X to essentially close a control loop.  My first concern is whether or not it can run fast enough.

  So my questions are: what is the maximum latency from the moment of receiving a signal strobe reading data from external hardware, then read a single 16-bit sample and sending it upward by NOR-DAQ to a user space application?  And, similarly, what is the maximum latency of sending a unique 16-bit value from a space application user down through NOR-DAQ, then write a port and affirming a strobe signal of external-data writing material?

  Thank you.

  Hi AliasMe,

  Thanks for posting and welcome to the Forums EITHER!

  Do you need to process the data in the software and generate a value on this basis?  DIO-32HS (alias PCI-6533) offers in the buffer of inputs and outputs, but you'd have a latency in your control system relying on the OS to do treatment.  Since this period is dependent on the system, I can't give a specification for the amount of time it would take.  However, integrating data in memory, processing and writing back to the card would likely be on the order of several milliseconds.

  Generally, we recommend FPGA in situations of control like this, so you can do all the processing in hardware.  However, if provide you more details on your request we can look into all the options available.

  -John

• PCI-DIO-32HS error FFFCB820 (-215008)

  DAQmx beginning gives this unknown error. What can it mean?

  I'm under task of digital acquisition with burst (output clock) with an external device, data transmission. Alone, it works fine.

  Then I need to measure the time after the end of playback (PFI6 = Dig0/ReadyForTransfer falling edge) to digital edge to PCI-6602...

  If I configure (road/DIO/Dig0/ReadyForTransfer to RTSI2, installation on PCI-6602 counter measures), while DIO task is running (starting, measure, stop) both run fine.

  But I need to sync.

  If I first set up task HSDIO,

  Then do road, set up and commit the task of counter configuration works very well.

  But DIO-32HS beginning gives higher error.

  Because of some course which is required for the DIO task, but is blocked by connection PCI6-RTSI2?

  Solved.

  Another development name of the channel to PFI6 instead of Dig0/ReadyForTransfer

  or a DIO task commit before routing and configuration of another task.

  But still don't know what to say error.

• 10401 DIO port PCI-DIO-32HS config error

  
  
  

• PCI-DIO-96 - OEM IBM

  Dear support,

  I got my hands on some PCI DIO 96 maps in scraps of IBM tape libraries.

  These cards were inside a special device PC running OS/2.

  The card IBM partnumber is: 19 p 5156 (OEM 068-02369-0000)

  Is there anyway that I can run these cards under Windows?

  I suspect there is another 'firmware' inside the map, because it does not load the driver correctly.

  Said driver Windows Manager: could not start the device.

  I use NEITHER-DAQmx 9.0.2.

  Some PCI card info:

  PCI\VEN_1307 & DEV_0054 & SUBSYS_00541307 & REV_02\4 & 258F4AE7 & 4040

  Thanks in advance.

  H. Haken

  Netherlands.

  Hello h. Haken.

  I did some searching on Google with the provider information you gave. There are a few other manufacturers who use the same name (PCI 96 DIO) for their cards. With the vendor information you gave, I came across the site of calculation of the measure .

  In the end, we can conclude that this device is not working under the DAQmx driver. Please contact the manufacturer for the correct driver.

  Best regards

• Integration of material NI_DAQ and NOR-DAQmx software on the same system PCI-DIO-96

  Hello

  We have a great system that is developed in VB and uses the traditional inherited NOR-DAQ system. The system controls the controller PCI-DIO-96. We would like to upgrade to some parts of the system to NOR-DAQmx and use VB.Net and we know that you can install both systems together on the same computer.

  We have a few questions:

  (1) once the legacy of NOR-traditional DAQ OR DAQmx software can be integrated in the same system. Some parts of the system will always use the VB and the other parties will use VB.Net.

  (2) if the answer to the first question is Yes. Are there hardware or software limitations? Is there a recommended way to integration?

  (3) are there articles based on the knowledge about it?

  Thanks Jeremiah

  There are a number of limitations to the use of NOR-DAQmx and NOR-DAQ traditional at the same time.  First of all, only one of the drivers can access the device at a time.  To switch between the drivers, I recommend that you read this knowledge base Article: that I can use OR-DAQ traditional (old) and NOR-DAQmx simultaneously?  You will need to use the equivalent functions of VB .NET to switch between the pilots.

  In addition, the system should use Windows XP or an earlier version.

• What is the connector 100 OEM part number used on the PCI-DIO-96 map pins?

  I have a PCI-DIO-96 card and I want to make my own custom cable to connect to the connector of the OID 100 i/o pins.  However, I can't find any reference to the reference OEM of the connector used on the PCI-DIO-96 Board so I can order his companion.

  If anyone knows of any information about the connector part number 100 pins used on the PCI-DIO-96 Board, I would be very happy to know this information.

  Thank you.

  Well, I found earlier the information I was looking for...  Page 1-3 of the PCI-DIO-96 manual (section "Custom wiring").  FYI, I have the March 2009 edition of the manual.  (it helps to actually read the manual, huh?)

  In this section, two OEM mating connectors are suggested:

  Company AMP (P/N 749879-9)

  Honda Corporation (Ref. PCS-XE100LFD-HS)

  I went to the website of the GPA.  There are actually two AMP parts active that do the trick... the P/N given in the PCI-DIO-96 manual map is the non-RoHS connector version.  The compliant version RoHS/ELV of this connector is AMP P / N 5-749879-9.  (Note than the previous one "5" in the part number)

  For the purposes of referral, the connector is a series of 0.050 "SCSI cable insulation Dispalcement Connector [CID] (100 pins to 0.050" Ribbon).

  In the United States, Heilind Electronics (http://estore.heilind.com) carries the AMP part.  Minimum purchase is six parts.  At the time of this announcement, they have a few hundred in stock.

  If all goes well, that helps other readers.

  -Mike

• Where can I download the compatible driver Intel(r) 537EP V9x DF PCI Modem work under Windows 7?

  I just upgraded my Dell Dimension 5100 to Windows 7 from XP. I can't get any internet connection with cable or wireless. I think the problem is the PCI modem. Where can I download the compatible driver Intel(r) 537EP V9x DF PCI Modem work under Windows 7?

  Original title: MODEM PCI FOR WINDOWS 7 DRIVER

  Thank you for your comments. I use the dial upward. However, my PC does not connect to broadband, even with direct Ethernet cable connection or adapter wireless Netgear WPN111, I used happily with XP on the same computer. Device Manager displays the PCI as incompatible. FYI, I downloaded and installed the latest drivers for the wireless card.

  Install the following:

  • Dell system software
  • Intel Chipset Device Software

  Dell systems must run more stably once they installed. I would remove the modem PCI card.

  Intel Pro/100 VE Ethernet should work natively with Windows 7 as Windows 7 has built-in driver:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18268&lang=eng

  Then the Netgear Wireless Adapter for Windows 7 driver from here:

  http://support.NETGEAR.com/product/wpn111

• HP Compaq DC7700 Small Form Fa: Driver PCI simple communications controller windows 8.1 64-bit

  I can't find the driver for my PCI simple communication controller that is compatible with 8.1 64-bit windows. could someone point me in the right direction (if all goes well a link to the driver I need)? I have already spent a lot of time to research.

  As I wrote above... If automatic installation method does not work, you must manually install the driver.

  Here's how to manually install the driver...

  Go to Device Manager and click the controller of simple communication IBOS who need the pilot.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp34743.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart the PC.

• PCI after Downgrade from Windows 7 device drivers?

  Driver for:

  Device PCI, PCI Bus 3, device 0 - int 0

  Message:

  The drivers for this device are not installed. (Code 28)

  To find a driver for this device, click Update driver.

  Downgrade from Windows 8 for Windows 7 64 bit, driver problems!  Have you tried a number of things, but nothing seems to work? Any ideas?

  Thanks in advance

  At any time.

  Glad to be of assistance.

  I recommend that you use these drivers for everything that you have not yet installed...

  First, install the amd chipset driver and restart.  You want the 49.7 MB file listed.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  Then is the graphics... install the beta amd catalyst driver and restart.

  http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

  Audio: Accept the agreement, download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownT...

  Ethernet: Download and install the fourth driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTy...

  USB 3.0: Install both.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417 & SP...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417 & SP...

  Card reader:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417 & SP...

  3D Driveguard:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1 & CC = US & DLC = in & LC = in...

  Webcam:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127341-1 & CC = US & DLC = in & LC = in...

• Properties of the controller PCI Simple communications in windows 8.1

  Update my PC in windows on HP Pavilion 500 - 307 x 8.1

  (1) missing PCI Simple communication controller

  Hardware ID

  PCI\VEN_8086 & DEV_8C3A & SUBSYS_2AF7103C & REV_04

  PCI\VEN_8086 & DEV_8C3A & SUBSYS_2AF7103C

  PCI\VEN_8086 & DEV_8C3A & CC_078000

  PCI\VEN_8086 & DEV_8C3A & CC_0780

  (2) missing BCM43142A0

  Hardware ID

  USB\VID_0A5C & PID_216C & REV_0112

  USB\VID_0A5C & PID_216C

  You are the very welcome.

  See if the driver for the IMEI of your laptop works...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123966-1&cc=us&DLC=en&LC=en&OS=4158&product=6521374&sw_lang=

  I see the ID of the hardware for your device in the driver installation information file.

  [Intel.ntamd64.6.1]
  ; DisplayName Section DeviceId
  % TEE_DeviceDesc % = TEE_DDI_x64, PCI VEN_8086 & DEV_1E3A
  % TEE_DeviceDesc % = TEE_DDI_x64, PCI VEN_8086 & DEV_1CBA
  % TEE_DeviceDesc % = TEE_DDI_x64, PCI VEN_8086 & DEV_1C3A
  % TEE_DeviceDesc % = TEE_DDI_x64, PCI VEN_8086 & DEV_1DBA
  % TEE_DeviceDesc % = TEE_DDI_x64, PCI VEN_8086 & DEV_1D3A
  % TEE_DeviceDesc % = TEE_DDI_x64, PCI VEN_8086 & DEV_8C3A
  % TEE_DeviceDesc % = TEE_DDI_x64, PCI VEN_8086 & DEV_9C3A

• Lack of drivers - PCI Simple Communications controller - Windows 7

  I can't find the driver for this

  :

  PCI Simple Communications controller
  PCI\VEN_8086 & DEV_1C3A & SUBSYS_21CE17AA & REV_04
  PCI\VEN_8086 & DEV_1C3A & SUBSYS_21CE17AA
  PCI\VEN_8086 & DEV_1C3A & CC_078000
  PCI\VEN_8086 & DEV_1C3A & CC_0780

  I read that I should install: Intel Chipset Device Software (INF update Utility - exe only) - but it keeps failing when installing. And, I don't know why.

  I have:

  ThinkPad T420i (4177/CTO)
  model: 4177CTO

  Running Windows 7 Enterprise 64-bit

  I tried to solve this problem for days. Please advise!

  And well, the cursor jumps around. Is - this caused by another driver missing?

  Hello and welcome, VtSpeckls

  It should be Intel Management Engine Interface
  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-t-series-laptops/ThinkPad-T42...

• ProBook 430 G1 - (unknown device) PCI Simple Communications Controller (Windows 7 x 64)

  Hello

  I am looking for Windows 7 64 bit driver for the following unknown device:

  "PCI Simple Communications Controller.

  Hardware ID: PCI VEN_8086 & DEV_9C3A & SUBSYS_1946103C & REV_04

  This identifies as the "Intel management Engine Components.

  I tried to install the HP driver sp63510.exe, so far without success...

  The installation process stops and I get the following error: "Setup failed to install one or more device drivers. The installation program will now stop. »

  I tried every single driver and the update of the firmware on the download page for the device specified... and now I feel like I'm on a dead-end road.

  Can someone tell me please in the right direction?

  Thanks in advance,

  Edward

  Hardware_dude

  The problem is old BIOS SP1 and the framework

  You cannot install different drivers, without this

  Don't forget Windows Update on 120 patch

  use for driver update HP SoftPaq Download Manager

• PCI/4070 Flexdmm with Windows 7

  See the datasheet shows Vista/XP Compatible and has been wondering if puts up-to-date or another gives Windows 7 compatibility? Thank you

  The latest NI-DMM driver is version 3.0.5 which will work with the PXI/PCI-4070 and works with Windows 7. It is available for download here:

  NOR-DMM 3.0.5-Windows Server 2003 R2, 32-bit/XP 32-bit/Server 2008 R2 64-bit/Vista/7

  Hardware devices (DMM) to support the hardware and the software requirements are listed in the Readme of the driver download page.

• 2220us G7: drivers for pci device G7 2220us - windows 7 64

  Decommissioning of the os from windows 8 for windows 7 64 and I lack of drivers. HP do not support win7 for this laptop G7 2220us

  PCI\VEN_10EC & DEV_5229 & SUBSYS_184B103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_184B103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00

  Missing drivers for PCI device please help!

  Hello:

  You should be able to use all the W7 x 64 drivers and software the g7z-2100 on your model, except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G7-2100-notebook-PC-series/5262610/model/5275620

  You need the driver for the hardware ID you have posted.

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp56467.exe