PCI USB-3 D: CTO of HP Pavilion HPE h8-1150z

Similar Questions

• HP Pavilion HPE h8-1150z CTO D: which USB-3 PCI Card

  I would like to upgrade computer (add) USB-3 to my existing. Which USB-3 PCI card (make and model) would be compatible with my computer?   Is there anything that should be avoided?   The card may only be installed or is there some other changes/upgrades necessary to make it work correctly?

  #HPExpertDay

  Yes, you can add USB 3.0, but it would work in 2.0 as the motherboard must be able to do.

  So you would need a powered USB hub.

• Try to install USB 3.0 PCI x 1 card in a HP Pavilion Elite e9290f

  Trying to install the USB 3.0 PCI x 1 card in a HP Pavilion Elite e9290f.   It is supposed to be a PCI x 1 slot and a PCI x 4 slot available for expansion.  I'm not one of these.  However, there is a very long slot just above the video card (x 32?).  Looks like that slot would host the map, but I do not see the power cables available with a male plug.  There seems to be 2 sheets of female power (red, black, black, yellow).  May need to find a male/male adapter, if these are sheets of power and of the large slot is one that I can use.  I'm setting up to use a 3 TB external drive and need to transfer about 2 TB of data.  Speed will really help.  Thanks for any help you can give me.

  Hello

  There should be a number on the motherboardPCI-E slots.  Any open slot should work.

  Review the information displayed in this thread.  If you look at the image I posted, then you will see two different types of connectors that you have a faucet using a separator of Y.

• HP Pavilion HPE 1090 t: could someone help me please... Desktop HP Pavilion HPE h8-1090 t CTO - PSU replacement/compatibiliy

  I just bought a new power supply (Corsair CS650M) because someone has suggested that it would be a good replacement power supply for my HP model which is HP Pavilion HPE 1090 t.   I need to know if this Corsair works and is compatible with my system, because something is not working with him directly or I did something wrong.    This is my first install and when it comes to the ins and outs of power amplification entry & exit and amperages I get so confused about this stuff.   But I think I took all the pluged connection correctly, at least when I re-plugin my old PSU after the installation to fail, I had the PC working again, what made me give confidence that I did the Corsair install correctly.  But what happens is after the installation of the unit from Corsair and turn the system he clicked power off after about 10 seconds or more and then restarted after a few seconds, then stopped again and turns off after another 10 to 15 seconds, and nothing would come up on top of the screen no more.   The first time I did the research what PSU would be compatible, I was getting conflicting results with a few places on the net saying that the majority of the HP out there (excluding some models such as the slimline) could be replaced by different manufacturers and higher power PSU, while other places I looked different.   Even the person who recommended me this power supply said in his post that he installed a Corsair HX650 model in its HP PC, and it worked very well for him.  Now, after the failure of the installation for the next few days, I did a lot more research and when I went on the site of HP and looked up the specifications of the model my PC I noticed under the power supply section, he had a heading that says "must select one of the following options" (in fact most of the different sections shows that the title too) and then he showed only two options 460W and 600W.  Then he asked me if it's the only option I get with my model.  And then I looked at my model number HP on the HP PartSurfer and under the section of the PSU, it also registers only 460W and 600W.   So who is?   I have to stay with only these options two HP or can I get a power supply with a higher power a bit then 600W from a different manufacturer that is what I want.    If I can get something that is compatible other than the options listed HP please let me know, or if this Corsair should work someone please let me know.   I need to return it otherwise.    My specs are below.

  Thank you Aaron

  HP Pavilion HPE series
  Model No.: h8-1090 t CTO Desktop PC

  Name motherboard manufacturer: IPMTB-TK Pegatron HP/Compaq name: Truckee

  PIC of the motherboard link: http://support.hp.com/us-en/product/HP-Pavilion-HP E-h8-1000-Desktop-PC-series/5080764/model/5117795...

  Original HP installed: AMD Radeon HD 6570 (Bronco) graphics card 1 GB Model: 648533-001, SP # 659355-001

  Link video card PIC: http://www.ebay.com/itm/111761368505

  Nothing has been added/modified recently real system.  Last change was the beginning of the year 2015, which was a new 2 TB HDD and added however problem memory only started about 3 weeks ago.  The Interior has been cleaned (diffuse can)

  600W Μatx Estar v5 HF PSU (Petrus)

  Information about the current hardware out of the Power Supply Unit

  Switching power supply
  Model: DPS-600WB A
  Part number: 633186-001
  600W power MAX

  Output: DC output rating (new Corsair PSU)

  + 12Va = output DC 16A = + 3.5V / + 5v / + 12v /-12v / + 5vsb

  + 12Vb = 18 a Max Load = 25 a / 25 a / 51 / 0.8 a / 3a

  + 12Vc = 12 a Max comb = 130W / 612W / 9.6W / 15W

  + 12Vd = 10A power Total Power 650W

  + 16 5.08V = side of AC input

  + 3, 3V = 15 a AC input: 100V - 240V

  + 2 5.08Vsb = current: 10A - 5A

  -12V = 0.3 frequency: 47 Hz to 63 Hz =

  Entry:

  100-127V ~, 50-60 Hz, 10 a

  200 - 240 v ~, 50-60 Hz, 4A

  You are welcome.

  Although there is a limit to the amount of power that is needed to power your computer, it uses only the amount of power it takes to power the computer correctly.  The extra power is kept in reserve for the purposes of art.  Thus, you cannot really bad the computer with extra power or amperage.  You can sleep on this point.

  Indianaak wrote:
  

  Thank you very much for your quick response, I wasn't getting anyone to answer the previous post.

  If your saying these HP spare parts are not exclusive to the company?  Some connectors may be owners, but most are not.

  It should work then?  Yes.  I've recommended hundreds of the PSU in the years I've been helping on the Forums; in fact since about 2002.

  How about the input/output & amperages of note that I registered?  As I understand not all this jargon, I want to assure you that I have / using correct notation for my system.  I don't want to fry one of my compondents with to much amperage.   Well, either I did something wrong installing or this power supply is a dud then.  Read my explanation at the top of the page.

  As I said before I pretty sure I had all the right connections, what can you tell me if it sounds right for you.  I have pluged in both connectors wired on the motherboard which were the main ATX 24pin power connector and the EPS/ATX12V 8 pin which I shared and pluged a piece of the cable labeled 'CPU' in slot 4 pins on the montherboard labeled ATX CPU.  Regarding the other split 4 pads, I don't see anywhere, it could be pluged into the motherboard.  If two 4-pin connectors were even marked, it should be good.  However, you can try to plug the other 4 pin instead of this, just to make sure that the right pair is connected to the processor power.

  My AMD Radeon HD 6570 1 GB graphics card is the type that is fed through the MB so I didn't use any of the PCI-E cables 6-8 poles.  It is very good.

  And so the only thing I had left that I have pluged the compondents of Sata cables that was my Bluray burner, my 2 TB hard drive and my USB 3.0 card.  They are very frank.

  Yet once again being installation of hardware in my system let me ask hopefully not a stupid question, but when you connect compondents Sata cable, you must have the plug-in in a particular order of wiring compondent or how do you?  I don't check the specifications of your power supply, but I think most of them have a single 12V rail.  If this is the case, you don't have to connect them to any order.  If there are two rails, it is best to divide the power of each rail.

  On my old PSU, it has an extension cable SATA used to connent card USB 3.0 which is pretty tightly squeezed between graphics card and sound card, so I guess I could use the extension cable with the new PSU POWER Sata wiring without any compatibility also publishes, right?  This should be no problem I can think of at this point.

  Thanks again for your help, I'll probably will try and plug it once more and see if I can make it work.  If this does not work for now, I strongly suggest that you contact Technical Support of Corsair for help.  They are the experts on their products and grab any errors that we do.  It is very difficult to diagnose a problem by far.  When you have done with this project, you will no longer be the excuss you are a novice. You will have a lot of knowledge that you did not when you started.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Desktop HP Pavilion HPE h8 - 1360t there rear USB ports?

  I have one of these order of HP computers. Everything I've read indicates there are USB ports on the front and the top of the unit. Nothing on the back. Not even a photo. Having the wires coming out of the front constantly ensure is ugly, in my opinion.

  Here are the specifications and configurable options for the desktop HP Pavilion HPE h8 - 1360t CTO. Here are the specs because that's card mother IPMMB-FM (Formosa). According to the specifications;

  

  (#2) - USB 2.0: 4

  (#4) - USB 3.0: 2

• PCI USB 3.0 Express card does not work

  Discription of the system:

  • HP Pavilion Elite HPE-520nl desktop PC
  • Processor Intel Core i7 - 2600
  • Memory 6 GB
  • Windows 7 Ultimate 64 bit
  • Service Pack 1
  • The map of USB 3.0 pci card the "HP-lable" is printed. Therefore an alaaa by HP original card.

  My HD portabale with USB3.0 interface is not recognized. Also all USB 2.0 memory sticks are NOT regonised by this card pci of USB 3.0.

  I searched on the web, this forum ect. and posible all software and drivers updated.

  Now at least there's no sign of escalmation in the Windows Device Manager.

  There are no errors in Windows and by double clicking on each and evry device a puppy window says: "device is functioning! (But when I put in a usb in the port USB3 device, nothing happens, not even a new drive appears under 'Computer'.)

  OK maybe the card is the default, so I bought at a local PC store a new one (Konig CMP-PCIE2USB3), but same problem.

  Well maybe the PCI slot is the problem... I put the card HP in the free location. But still no luck.

  Now I have 2 PCI USB 3.0 Express card in my office, but no USB 3.0 for my USB 3.0 devices connection.

  All USB 2.0 ports are working well.

  Help, please.

  

  I uninstall the original card and don't forget to remove the driver. Then install the Konig CMP-PCIE2USB3 and install the driver from the Web site. Don't forget to attach the molex 4 pin of your power supply.

• HP Pavilion HPE h8 - 1380t CTO: compatibility problems, ask questions about knitting-by-turn or possible motherboard replacement.

  I recently baught an EVGA GTX 1060, as this 630 became quite long in the tooth and I thought that I would try to future proof myself a little as the rest of my components seem to be working very well.  However, I can't get the map to work correctly on this particular computer.  Oddly enough, I can get past that screen startup finally after several short beeps and let it sit, but it takes fowever to reach the office and clearly is not executed properly that the resolution is wobbly and software from Nvidia cannot even detect the card.  I guess I had got this far because of the onboard graphics of some sort, but AFAIK this motherboard which lacks.

  I know that the card works fine as I tested it in my other Tower, so I struggled to find a solution.  So far, it seems that the problem is most likely the motherboard, as HP does not have a new BIOS for it since the beginning of 2013 (which I did go ahead and install it).  If true, I find myself with either two options, it seems that the ditch system, entirely or find a motherboard that works with all my old components.  I'd rather not have to empty this workaholic, when all other parts work great, if it is not a work around I would like to know if there are motherboards I could pass that would work with the rest of my components.  Normally I would not bother with even apply for, but I hear a lot of chatter on HP PCs pre-constructed having compatibility problems.

  I bought this computer there is in the case of four years that I would be able to update as I do with any other PC, but I didn't know at the time that HP has a tendency to not update the BIOS settings for anything beyond a year which I admit is incredibly frustrating.  What is done is done however, and I want to make this work without having to clear the entire system.

  Desktop HP Pavilion HPE h8 - 1380t CTO

  Model #: B4J28AV
  Serial number: 2MD2290502

  Motherboard: 2ACE "Pittsburgh" Pegatron Corporation

  Processor: Intel Core i7 3820 3,60 GHz 'Sandy Bridge - E.

  RAM: 10 GB of DDR3 memory

  GPU (stock): Nvidia GeForce GT 630 (this is replaced by the EVGA GTX 1060)

  @Faver, welcome to the forum.

  Your problem is the BIOS.  However, it is because the 1060 GTX requires UEFI in the motherboard instead of a standard/Legacy BIOS.  HP didn't start using UEFI until mid-October 2012.  The BIOS may not be upgraded in the UEFI.  The last cards only not for UEFI were the GTX 660/670.

  MSI made cards with a switch that can be used with a Legacy BIOS or UEFI.  If you decide to go this way, you must contact their Technical Support to help them choose the best card for your system.

  The upgrade of the motherboard can be a problem.  HP has taken advice their specifications.  Therefore, they are not necessarily the same as the commercial versions.  Please make sure that the holes in the motherboard matches the accessory in the case.  In addition, some members have had problems with the connectors in the connections case before, for example, the power button.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Where are the Ports USB 3.0 of my HP Pavilion dv6-6158nr Notebook?

  I am unable to find the Ports of USB 3.0 on my HP Pavilion dv6-6158nr laptop.

  Please tell which side are these ports and how to get the maximum speed out of them?

  Hi Hanazir,

  You'll love this.

  Get a bright light and shine on the left side of the laptop.

  Now, get a magnifying glass and look carefully next to the USB ports.

  3.0 ports are marked with the logo 'SuperSpeed '. "SS".

  Similar to this, but very, very small!

  

  To get the maximum speed, use only with devices usb 3.0 - external hard drives, USB sticks, etc done to run with this technology.

  There is no harm in using the USB3 ports with usb devices 2.  In most cases, USB 2 devices work as expected when connected to a USB 3 port.  There are rare cases where the USB 2 device may not work when it is attached to a port USB 3.  Before you accuse the laptop / desktop or even the port and if your laptop don't not have a USB 2 port, then consider to plug a USB 3 hub that supports one or more USB 2 ports and try that.  A few specialized 2 USB devices require USB 2 connection - deal with it.

  Dragon tips

  USB 3 external drives: offset connection, more or less depending on your hub, your hardware and your player can add up to an unacceptable delay when you use a USB 3 hub in conjunction with port USB 3.  Huh?  Unless absolutely necessary, do not use a USB hub 3 with an external drive USB 3 - connect the USB 3 drive directly to your 3 USB port on the computer.

  Other usb devices 3 work well on the SIIG 7port USB 3.0 / 2.0 Hub - this is a very nice quality, IMO and is supported by its own power supply.  Nice.

  It's my pleasure to help.

  Click on the Thumbs-Up Kudos to show that you appreciate the help and time of our Experts.

  When the answer is a good fix or workaround, click accept as Solution !

  Although I strive to reflect best practices of HP, I do not work for HP.

• How do I get standard enhanced pci-usb host controller. My pc says that I could speed up usb.

  Running on Windows XP HOME SP3, with updates to date (30/08/2013). I tried in vain to find this driver so that I can use USB2. The chipset of the PCI card - USB 2 is ALi.  I tried to look at the site of ALi but in vain except re - runs to third parties that offer something other than the drivers I need.

  Someone at - it a response?
  Regards, Ray.

  Hi Nirmal 5,.

  After struggling against v. much, my EHCI USB problem seems to be resolved. I found a version a little later the EHCE Ali set of drivers and to reach all devices are woodworking!
  My system is old in terms of pc, I built it 11 years ago, and being a pensioneeeer, I'm still saving up for a new construction. The mobo had USB 1.1 embedded (which I disabled it in order to eliminate conflict, after installing PCI - USB card). After you have installed a PCI - USB card, my trouble started. Difficult to get info., gigabyte re: problems like this, so had to groping my own solutions.
  Thanks for your concern.
  Sincerely, Raymond.

• HP Pavilion HPE h8 - 1070t CTO need case fan

  HP Pavilion HPE h8 - 1070t CTO, product number: LP028AV #ABA

  After an error message, on the fan and case fan noise I replaced the AVC DS09225R12MC234 DC 12V case fan 0. 3A with a Startech.com FAN9X25TX3H case fan.

  A program to monitor I have shows an increase in rpm of the system another fan. I'm trying to find out if my new fan is correct or adequate propper case fan.

  Hi checkit, as long that all fans are working and they doesn't make unusual noises or work allways on the maximum RPM is fine, Adi.

• Error PCI / USB - W2003 Server - Dell POWERVAULT NF100

  A seguito di server a blackout he ha no problema con una scheda PCI by cui carries some USB non sono utilizzabili.

  Vari test diagnostici e dopo prove abbiamo verificato che door USB non funzionanti sono what anteriori.

  He drove ventilconvettore del Server di e di colore ambra invece che di colore blu.

  In hoist due immagini con gli if riscontrati sia a di windows che level is a level is di test diagnosis.

  Come detto togliendo UN disco is external went USB wheel e riavviando it server if accende correctly e seems funzionare, HD, scheda di rete, monitor, eccetto e PCI USB anteriori.

  SERVICE TAG

  ADMIN NOTE: maintain the label removed by privacy policy >

  EXPRESS SERVICE CODE

  ADMIN NOTE: kidnapped by the Express service code privacy policy >

  Saluti,

  Marco

  Buongiorno,

  by procedere alla riparazione del server can farvi due tipi di preventivo:

  1 Sostituzione della parte con UN tecnico onsite

  2 per e restituzione della sola parte guasta.

  A quale option e interested?

  Nel caso could inviarmi in privato it contact by l'eventuale e intervento the address.

  Grazie

  Marco

• HP Pavilion HPE h8 - 1010t CTO D: the GPU upgrade, now the PC will be unbootable, or even POST

  I visit my father. We strive to upgrade the GPU in its Pavilion from HP running Windows 7.
  
  http://support.HP.com/us-en/product/HP-Pavilion-HPE-H8-1000-desktop-PC-series/5080764/model/5140202
  
  The PC was shipped originally with a GPU Radeon HD 6450 (1 GB). It has only 2 video, outputs and he wanted to add a third monitor. I recommended he buy a new GPU. He bought a 260 X XFX R7.
  
  http://xfxforce.com/en-us/products/.../AMD-Radeon-R7-260x-core-Edition-R7-260x-cnf4
  
  Also, we went to electronics, Fry's and bought a new power supply, a N500 Lepa, which is a power of 500w. We have successfully installed your new diet.
  
  Now, when I removed the old GPU, and put in the new GPU, PC turns on, the Red led light on the front comes on and stay red, but the PC unbootable. The screen is black, and it is not initialized.
  
  I once forgot to connect the power supply to the GPU. That day the PC started to boot the system & I was able to use logmein remote inside to turn it off, but once the machine was turned off again and I plugged the power of pin PCIexpress 6 pay-per-view, same behavior. PC is out of warranty w / HP, so that they are without help.
  
  I went to the website of HP and the BIOS update. still no luck.
  
  We have added some third-party RAM. I tried to remove the third-party RAM to see if it was the question. Does not solve it. I tried to remove the OEM ram and install just the 3rd part of RAM, but has not made a difference either.

  There is not BIOS version 8 available. Your situation is not a happy scenerio.

• Connect the second VGA monitor to Pavilion HPE

  Hello

  I have a Pavilion HPE h8-1114 PC, that has a DVI and HDMI monitor port. I have a VGA monitor connected to the DVI port with an adapter. I have a second VGA monitor, I want to connect, but I understand that it cannot be connected to the HDMI port. Are there other options besides buying a HDMI monitor? Can I use one of the covered ports which I think is VGA? (I guess not.) Can I add a second graphics card with a VGA port and use both screens? (I saw on another post that adding another graphics card could disable the existing card). Can I opt for a card that supports two VGA or DVI ports?

  Thank you!

  In addition what erico said, there are other options. You can use a video-to-USB adapter of EVGA UV plus + 19 or you can add a x 1 PCIe graphics card. If with a PCIe x 1, using a card Nvidia... results will be the best in this way.

  Frank

• Pavilion HPE: Obtaining a recovery media for your desktop HP custom build

  I replaced my SSD drive failed in my HP Pavilion HPE I bought in July 2012 and seeks to
  do a system restore for a restoration of the value I created before the break.  I start the PC with the first DVD-R disk in the drive (by car I used for the set), press ESC to enter the boot menu, navigate to the Boot Menu to select the /SATA2 option Legacy Boot Sources/ATAPI CD/DVD Drive option.  The result I get is:

  "Intel UNDI, PXE - 2.0 (build 083)
  COpyright (C) 1997-2000 Intel Corporation
  For Atheros PCIE Ethernet Controller v.2... 1.9.9(08/12/11)

  Check the connection of the cable!

  PXE - M0F: Exit Intel PXE ROM.

  ERROR: no boot disk was detected or the drive failed. »

  The drive fail as failure.  I read on another computer very well (open files, view file properties, copy the folders and files).  For a smile, I put an old XP Recovery disk in the drive of the computer, I'm trying to restore and he was able to read that.

  Whatever it is, I try to order recovery disks by following the link on this page:

  http://h20565.www2.HP.com/hpsc/doc/public/display?docLocale=en_US&docid=emr_na-bph07143&sp4ts.Oid=52...

  This page asks me to provide a specific model number.  I don't have because it is a customized version.

  It's on my list of selection information:

  > YOUR
  > CUSTOM HP PC
  > h8t
  > • Windows 7 Professional (64 bit)
  > • 2nd generation Intel Core i5 2400 quad-core
  > processor [3.1 GHz, 6 MB cache]
  > • FREE 6 GB DDR3 1333 MHz SDRAM [2 DIMMS] UPDATE
  > 4 GB
  > • 1 TB 7200 RPM SATA hard drive
  > • No secondary hard drive
  > • SAVE $40 on Microsoft Office Home and Business
  > 2010
  > • No additional security software
  > • 1 GB DDR3 AMD Radeon HD 7450 [HDMI, DVI, VGA via a
  [> adapter]
  > • 300W power supply
  > • DVD SuperMulti burner
  > • LAN wireless-N (1 x 1) card
  > • 15-in-1 reader cards, 2 USB 2.0 (front), 2 USB
  > 3.0 (top)
  > • No TV Tuner
  > • Beats Audio (tm) - a built-in studio quality sound
  > • Premium HP keyboard and optical mouse
  > FREE • Adobe Premiere elements and Photoshop 10 [$149
  [> value]

  If I can't use the recovery set I did, how can I get a proper HP for my setup recovery disk?

  Hello

  A 240 GB SSD is large enough for the support of HP recovery work.  Order the HP support.

• Pavilion HPE H9-1130: install the firewire card correctly into the slot of the motherboard correctly

  Hello, for my HP Pavilion HPE H9 1130, how to install the correct firewire in the motherboard slot card OK in OS Windows 10 x 64 / x 64 processor? And what video software system can I download to recognize my Panasonic 100a camera AX?

  Thank you. Followed your instructions. And it worked perfectly. Thank you. Even if I have Adobe Prem Pro, I downloaded MS Director and put 9 drivers after installing the PCIe card. Then it worked perfectly to capture video from a FireWire camera. Thank you once again!