PCL Code for the selection of the status bar

We have a Unix-based program that relies on EZ for the selection of the printer spooler. Printing was allowed until we replaced the old printer with a HP 3005dn. We must make letterhead in tray 3. EZ print spooler requires to print PCL codes. I ran the code numbers range to print from the 3rd drawer.

My problem is when it receives the print job, you have to hit the OK button twice so he can shoot from the 3rd drawer.

By changing the PCL code, I can get him out tray 2 automatically, or stops for tray 3.

I have modifed the installation of manual feeding system and or use requested tray do not help both.

Here's the line of code in order

PCLx_lowreceipt_ac_begin_ ^ [& l0o66f4H ^ [& s1C ^ [(s4099t0p12H_]]

4 H is supposed to designate the selection of the status bar. I spent several hours from 1: 00 until 8: 00 successfully and to have the work automatically pull from tray 3.

any ideas?

Solution

You need to access from the UI and not the control panel

-IP in the laserprinter

-Tab settings select

-Set the camera (left side)

-Develop "Configure Device" in the center of the page

-Develop "Impression".

-Develop 'PCL '.

-at the bottom, "Mapping of media sources"... assign the Standard classic.

Worked!

Tags: HP Printers

Similar Questions

  • How can set the background color of the status bar?

    Quote from the old forum:

    Comments: comments
    How can set the background color of the status bar?
    Posted the: July 17, 2008 02:56
     
    How can set the background color of the status bar?
    Using this code for the status bar:
    LabelField statusField = new LabelField ("Good Morning", LabelField.USE_ALL_WIDTH |) LabelField.NON_FOCUSABLE | LabelField.HCENTER)
    {
    int _backgroundColour = Color.LIGHTGREEN;
    public void paint (Graphics g)
    {
    g.setBackgroundColor (Color.RED);
    g.Clear ();
    Super.Paint (g);
    }
    };

    Font defaultfont = Font.getDefault ();
    Police smallfont = defaultfont.derive (Font.PLAIN, 12);

    statusField.setFont (smallfont);
    setStatus (statusField);

    When I ran the code you have above, my status background color was red.  Is not what you see?  If so, please provide the BlackBerry model and software version that you are testing.  You can find this under Options.

    Or if you try to do something else, please provide details.

    I tested this in the BlackBerry Simulator included with version 4.5.0 BlackBerry JDE (4.5.0.44).

    To do this in version 4.1, first call getColor and save the current color.  Then call setColor, setting the color to the color you want to use for the background.  After this call call fillRect, starting with 0, 0 and go to the size of the field (use this.getWidth () and this.getHeight () to get this).  This must fill in the field with your specified color.

    To allow the drawing of the default content of the field call setColor once again, passing in the original color, then call super.paint.

  • Hello, I have Wacom product code in Exchange for buying one. On the CC here there is a button that says "Download" (and not "download trial"), so it seems for the status. But when I press it it says download started, but in fact it didn't.

    Hello, I have Wacom product code in Exchange for buying one. On the CC here there is a button that says "Download" (and not "download trial"), so it seems for the status. But when I press it it says download started, but in fact it didn't. What seems to be the problem?

    Hi Lex % 20Draijer,

    You can try the same thing using a different browser.

    or you can download Creative Cloud via https://www.adobe.com/creativecloud/desktop-app.html

    You can also see help document https://helpx.adobe.com/creative-cloud/help/manage-apps-services-desktop.html

    Hope this will help.

  • Using AJAX code for the conditional selection list.

    Hello

    I use AJAX code for the first time, I have no knowledge in java, I got the code from this forum and try to manipulate my requirement.

    My requirement is that I have two selection lists, host_name) 1 and 2) database_name.
    As soon as I pick/choose the value of host_name select list, I need to fill in only the databases on this particular host. I don't want to send the page for this action.

    Here is the code, thank you if anyone can help.


    On request the code application process:
    -----------------------------------------------------
    declare
    number of l_counter;
    l_o_name varchar2 (2000);
    Start
    owa_util.mime_header ("text/xml", FALSE ");
    HTP.p ('Cache-Control: non-cache');
    HTP.p ('Pragma: non-cache');
    owa_util.http_header_close;
    HTP. PRN ("< select > '");
    for rec in (select "ORA_DATABASES_VW". "' Database_name ' as 'database_name ',.
    'ORA_DATABASES_VW '. "" DB_ID "as"DB_ID ".
    of 'ORA_DATABASES_VW '.
    where 'ORA_DATABASES_VW '. ("' HOST_NAME ' =: TEMP_ITEM)
    loop
    HTP. PRN ("< option value ="' | rec.db_id |) '">' || Rec.database_name | ("< / option >");
    end loop;
    HTP. PRN ("</select > '");
    end;

    Header HTML on this page:
    =================
    < script language = "JavaScript1.1" type = "text/javascript" >

    function get_List_XML (source_item, target_item) {}

    var v_Target = html_GetElement (target_item);
    var v_Source = html_GetElement (source_item);
    var ajaxResult = new htmldb_Get (null, & APP_ID, 'APPLICATION_PROCESS = POPULATE_LIST_XML', 0);
    ajaxResult.add ('TEMP_ITEM', source_item.value);
    var v_result_xml = ajaxResult.get ('XML');

    If (v_result_xml & & v_Target)
    {
    var options_Contents = v_result_xml.getElementsByTagName ("option");
    v_Count = options_Contents.length;
    v_Target.length = 0;

    for (var i = 0; i < v_Count; i ++)
    {
    var v_opt_xml = v_result_xml.getElementsByTagName ("option");
    appendToSelect (v_Target, v_opt_xml.getAttribute ('value'), v_opt_xml.firstChild.nodeValue)
    }
    }

    }
    function appendToSelect (target_item, option_val, option_content) {}
    var v_Opt = document.createElement ("option");
    v_Opt.option_value = option_val;
    {if (document. All)}
    target_item.options.Add (v_Opt);
    v_Opt.innerText = option_content;
    } else {}
    v_Opt.appendChild (document.createTextNode (option_content));
    target_item. AppendChild (v_Opt);
    }
    }
    < /script >


    Attribute of the form in the host_name column element. P935_INSTANCE_DB_NAME is my page for database_name.
    OnChange = "get_List_XML (this,"P935_INSTANCE_DB_NAME").

    Feel free to mark the answers useful or correct ;)

  • where should I enter the editor activation code for the creative cloud

    Where should I enter the editor activation code for the creative cloud?

    Your subscription to cloud shows correctly on your account page?

    If you have more than one email, you will be sure that you use the right Adobe ID?

    https://www.adobe.com/account.html for subscriptions on your page from Adobe

    If Yes

    Some general information for a subscription of cloud

    Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

    Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

    -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

    If no

    This is an open forum, Adobe support... you need Adobe personnel to help

    Adobe contact information - http://helpx.adobe.com/contact.html

    -Select your product and what you need help with

    -Click on the blue box "still need help? Contact us. "

  • Colour code for the new HFM 11.1.2.3

    Hi guys,.

    could someone tell me the color code for the new HFM 11.1.2.3 show empty lines in line with the background color. HFM 11.1.1.3 code was #E5EAEF

    See you soon,.

    Lukas

    I don't have the code (or the version that you are on), but I can tell you how to find it.

    Take a screenshot, then open Paint.  Paste it in here and use the eyedropper tool to select the color.  In th etop of law, click edit colors and it should bring up the color with your color editing page preselected.  At the bottom right will be the numbers next to red, green and blue.  Convert numbers in Hex and you'll have your code.

    To use the text of your topic here for example, the numbers are therefore 31, 78, 174.  This becomes 1F, 48, AE.  Put them all with a # in fron and you have #1F48AE.

    You can use this trick to get no matter what color you want out of the system corresponds to the formatting.

  • What is my access code for the software updates

    What is my access code for the software updates?  It seems to be a six-digit numeric code, but I have no recollection of anyone establishing.

    Take a look at this thread, what is the password for software update

  • Need a visual cue for the status of Plugins

    Need a visual cue for the status of Plugins:

    . . . "Ask to activate" - these are light gray - it's good

    . . . "Always enable" - should be in light green

    . . . 'Never turn on' - should be in red light - it currently goes to a slightly darker shade of grey

    Be able to sort them based on the State

    The above would make it easier to verify that they are the way you want

    There is only a ' true/false' = active tribute to work with, so you cannot always distinguish between activate and ask to activate.

    .addon-view[type="plugin"][active="false"]{box-shadow: inset 0pt 0pt 100px rgba(255,144,144,1.0)}
  • Recently I have not been able to forward my iPhone 5S for message store.  I've never had this problem before. When I looked to what to do, I realize that The Call Forwarding icon does NOT appear in the status bar when I try to transfer calls.  How c

    Recently I have not been able to forward my iPhone 5S for message store.  I've never had this problem before.

    When I looked to what to do, I realize that The Call Forwarding icon does NOT appear in the status bar when I try to transfer calls. How can I fix this please?

    It does not work using * 21 * + 6 * 41412 * 2 #.

    < personal information under the direction of the host >

    Call forwarding is a function of carrier. Contact your operator.

  • How Javascript to work? It is enabled in options, but nothing happens when I select something that starts "javascript" on the status bar at the bottom of the screen.

    When I tried to download a file from the Canon U.S.A., I clicked on the button "I agree - begin download" and nothing happened. The information contained in the status bar at the bottom of the screen, when the mouse cursor is on the download button is "javascript:downloadFile(). I followed from the error console-
    Error: The stylesheet http://www.usa.canon.com/wsss/GeneratedPages/wsss_xsl/global.css was not loaded because its MIME type "text/html", is not "text/css".
    Source file: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/i_series/i950_series?selectedName=DriversAndSoftware

    There are also many warnings on the analysis of the orders.

    This kind of thing seems to happen every time that whenever that javascript is involved.

    Make sure that you do not block the JavaScript settings and preferences for interactive web pages

    • "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
    • 'Delete Cookies' of sites that cause problems: Tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

    • Makes no changes on the start safe mode window.

    See:

  • I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

    I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

    Sorry, but the restriction password cannot be reset, it is part of the backup and restore a backup that was taken after the restrictions were activated, restore this code again.

    You will have to start without the help of the data backup, configure the phone to factory settings and start over. Follow the steps mentioned in this article:

    Use iTunes to restore your device to factory settings - Support Apple iOS

    If you lose or forget your password restriction, you must erase your device and then put it up as a new device to remove the restriction password. Restore the device by using a backup does not delete the access code.

    copied from: Sur les Restrictions (parental control) on iPhone, iPad and iPod touch - Apple Support

  • How can I get the color codes for the notebook

    How can I get the color codes for the notebook?

    Hello

    What is the color codes for the notebook?

    Perhaps you need a 3rd party utility like GetDiz - Free and others to be
    found using BING or Google.

    GetDiz Notepad - free - replacement
    http://www.Outertech.com/en/Notepad-replacement

    I hope this helps.

  • Can we get the source code for the camera?

    Can we get the source code for the camera? Including libraries? CM is great, except that the camera is not well polished, and the quality of the stock ROM Sony are much better.

    probably more likely questions and restrictions of copyright

    inspect the developers space

    http://developer.sonymobile.com/

  • How can I find the code for the corrupted by the sfc scan files?

    I'm new to computers and I'm not aware about many of these things, I have a laptop Dell Inspiron 1545 with a Vista Home Premium operating system on a 64-bit platform, I did a sfc scan and it found 8 files corrupted. I have also a code will correct corrupted files, but I don't know where to find the codes for the corrupted files to put in the code for fixing corrupted files. I found the log file for the corrupted files and it's the same as the instructions I had to use the code to fix the corrupted files but there is nothing in the log file that corresponds with the file name needed to repair the corrupted files. Where can I find these files? Thanks for any help.

    Hello

    Not sure what you mean by you have a code to solve those? Create a sfcdetails.txt and that you post a copy
    each section of a message here - they will repeat in order to do not post duplicate sections, as appropriate.

    ------------------------------------------------------------

    Many files that SFC cannot resolve are not important.

    Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

    put the command from below (copy and paste) in this box and her and then press ENTER.

    findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

    who creates the sfcdetails.txt file in the folder that you are in when you run it.

    So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    in Windows Vista
    http://support.Microsoft.com/kb/928228

    This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
    here. NOTE: there are probably duplicates so please only post once each section error.

    You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
    You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
    (You may need to search sfcdetails.txt if it is not created in the default folders.)

    I hope this helps.

  • I can't find the code for the printer or the menu of the printer 6500 E-mail address

    I can't follow the instructions to retrieve the code for the printer, I see the symbols but don't see how to print, or to get the Email address of the printer menu

    Maybe the info here will help you

    http://h30434.www3.HP.com/T5/eprint-print-apps-mobile/print-your-Web-services-info-sheet/TD-p/57261

Maybe you are looking for

  • Search for address bar Firefox continues to go to Yahoo even when set on Google

    Whenever I search using the address bar he continues to go to Yahoo. I already updated the configuration "keyword. The URL' to 'https://www.google.com/search?q=', but it does not work. I tried to uninstall FF and it always happens with a new facility

  • C70D-B-108 - portable satellite slower that I've ever seen

    Hi all My grandmother recently bought this Toshiba, for most I recommend people a Toshiba but it goes further. I didn't know that she bought a laptop until she called me and said that she needs help because she has never worked with such a slow compu

  • Iconia A110 - turn vibrate off the coast?

    I went through all the settings I can think and have turned each evolves in the silence and save again and can't turn off the vibrator for notifications feature. Is this possible and if so, HOW? lol also, though less boring, is there a way to turn th

  • Pavilion DV6 s 2803: android USB

    When I connect my new Smartphone Android on the laptop, it has not "seen" the phone or vice versa. I googled the problem and a site recommended putting the phone into USB Debug mode. This made little progress. The laptop shows two Android devices unk

  • BlackBerry Smartphones Zip files

    I have a blackberry "BOLD", how do you download a zip theme?