PCL5 printing codes to turn off paper tray switching when the tray is in the paper

We have a HP P4015n with 3 trays, tray we letterhead, tray 2 has plain paper, tray 3 preprinted forms (all dimensions 8.5 "x 11" paper ").  This is related to a Linux system with printing from a legacy software - they are mainly text documents that have integrated the PCL control codes.

The problem, when a drawer is empty, print will continue to the next state bar, which can have a header of letter or preprinted form, etc.

Can I turn off automatic tray switching?  Either using a code printer PCL or via the printer control panel?

If I print on tray 3, this tray is empty, I want the printer to wait until the tray has paper once again and do not use a different tray.

I played a bit with the 'document type' (letterhead, pre-printed form, etc.) setting found on the built-in printer web page, but when I send a job there, the printer needs someone to hit the 'OK' on the printer. I guess that the printer is looking for the paper incorporated in the corresponding document type.  Is there a print PCL code for that?

I have done research on PCL5 printer control codes and can not find, or another command.

Thanks for any help,

This should help you:

http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=bpl05272&JumpID=reg_R1002_USEN

On the other hand moving up to the next plateau, depends on the printer.  Some let not work continue to the next bar if the paper type is defined differently, but it is more common that the printer will just continue.  The only solution I have found is when big jobs you know will exceed capacity of the tray should just make sure that the right paper is in all stores.  The other thing is too, to keep the full trays (just make sure to put the fresh paper under the paper that is in the status bar to reduce interference issues).

I am including the link to the history of PCL/PJL because inside under the additional Documentation, it links to PDFs of the technical manuals detailing everything that you could ever want to know about hand coding for printing using these languages:

http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=bpl04568

Tags: HP Printers

Similar Questions

  • Two problems that seem to be related. The screen turns off suddenly and reappears when the mouse is clicked. At the same time, the cursor insertion point disappears.

    The cursor disappears during the strike. It is blackened and cursor disappeared three times during the typing of this sentence. Very frustrating! I'm running Windows 7 Pro on a Dell Inspiron.

    Hi Ed,

    Thanks for posting your question in the Microsoft community.

    I understand that you have 2 problems on your Windows 7 computer.

    1. The screen turns off when you click with the mouse.
    2. The cursor on the screen disappears while typing.

    Let me know if this interpretation is erroneous. To better understand the issue, let me ask a few questions.

    1. What is the brand and model of the computer?
    2. You did changes to the computer before the show?

    I am here to help you and I suggest these methods to solve the problem.

    Method 1:

    Start the computer in safe mode and check if the same problems occur. Safe mode allows only a minimum set of services to load, this will help us to know if a service is causing the problem.

    Startup options (including safe mode)
    http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

    Method 2:

    If the problem does not occur in safe mode, and then perform a clean boot, this will turn off non-Microsoft services and therefore to determine if any non-Microsoft service is causing a conflict for the problem to occur.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: once the diagnosis is made, follow the steps in the article to configure the computer to start the Normal start.

    Method 3:

    The question could have occurred because the drivers on your computers are not updated. See the link, follow the steps and update the drivers.

    Update drivers: recommended links

    http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

    You can also check this link for more information.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    View the status of the issue. If the problem persists then let know us, we will provide several methods.

  • my printer will not turn off

    Office Jet 6500, wireless, printer will not turn off.

    Disconnect the power from the back of the printer for 30 seconds.  Plug in and turn on.

  • On the new Apple TV 4th generation, can I turn off bluetooth as possible with the 3rd generation?

    Hi, on the new Apple TV 4th generation, can I turn off bluetooth as possible with the 3rd generation?

    I don't think it is necessary for the remote control of Siri.

  • How to turn off inprivate filter? When I go to security and turn it off I'm ok until I quit internet Explorer

    Original title: filter inprivate

    How to turn off inprivate filter? When I go to security and turn it off I'm ok until I quit internet Explorer

    What you say has not added to the top...

    InPrivate Browsing must be turned on by you.

    At the time wherever you go out navigation, Inprivate browsing is also disabled.

    Read the last sentence of this screenshot...

    Maybe I misunderstood what you are saying?

  • mouse Bluetrack 4000 light turns on normally and then turns off on problem is not the battery

    mouse Bluetrack 4000 light turns on normally and then turns off on problem is not the battery.

    Hello

    1. your wireless mouse does not work?

     
    I suggest that you follow all the steps of the article which will help you solve the problem
     

    Troubleshoot a wireless mouse that does not correctly
    http://support.Microsoft.com/kb/321122

  • How can I turn off wireless and bluetooth via the bios?

    "How to turn off the Wi - Fi in bios maps?

               

    I have a laptop Toshiba and Windows 7.

    Some specifications are necessary for me to work on a remote network. Bluetooth and Belarc test still does not work and I get the message"wireless cards must be disabled in the bios. »

    Without thread is DISABLED in the BIOS, also, I went to the network and the Internet and chose WIRELESS DISABLED ON HARD WIRED CONNECT and network cards, I DISABLED it. Also, I went to the network and sharing Center and changed the settings of the adapter to DISABLE.

    Wireless Configuration Utility > Broadcom Wireless Utility > "No currently no wireless available and active devices."

    Bluetooth is UNINSTALLED

    What else can I possibly? I would appreciate a solution.

    Thank you

    GVautour

    Hello

    Thanks for posting your query in Microsoft Community.

    You want to turn off wireless and Bluetooth via the BIOS, I suggest you ask to contact the manufacturer of the computer for that.

    Please do not hesitate to post, if you face problems with Windows in the future, we will be happy to help you.

  • Error "switch off and then switch on the device. B84DEe3DO.

    My printer shows error turn off then turn the power back on. B84DEe3DO.

    I don't understand what that means, when I translate it as 'Burn then turn on the unit.

    Can someone help me?

    Thank you very much

    Hans

    The printer is OfficeJet L7680.

    Problem has been resolved. It was not put in power, but he had to with a USB stick which I use for scanned documents. It is always connected to the printer. When I removed and used another key USB problem has been resolved.

    Thanks for your reply,

    Hans

  • Printer Spooler service turns off - Windows 7

    Hi guys.

    After trying and trying several solutions online to resolve Printer Spooler service, still me have the same problem.
    The spooler goes off in a split second, as soon as I turn it on.

    Ive tried to delete all printers.
    Also there isn't any "Printers" folder in the following directory: c:\Windows\System32\spool

    I got the report of accident for you to source: C:\ProgramData\Microsoft\Windows\WER\ReportArchive

    Please indicate how I can solve the problem of spooler and let it run?

    'Version = 1 '.
    EventType = APPCRASH
    EventTime = 130201389863919618
    ReportType = 2
    Consent = 1
    UploadTime = 130201389889851101
    ReportIdentifier = a5bf9ca2-fd6c-11e2-910f-88532e4161ca
    IntegratorReportIdentifier = a5bf9ca1-fd6c-11e2-910f-88532e4161ca
    Response.BucketId = 62923011
    Response.BucketTable = 4
    Response.Type = 4
    SIG [0]. Name = name of the Application
    SIG [0]. Value = spoolsv.exe
    GIS [1]. Name = Version of the Application
    GIS [1]. Value = 6.1.7601.17777
    GIS [2]. Name = timestamp of the Application
    GIS [2]. Value = 4f35fc1d
    GIS [3]. Name = name of the Module fault
    GIS [3]. Value = HpTcpMon.dll
    GIS [4]. Name = Fault Module Version
    GIS [4]. Value = 7.2.5.51
    GIS [5]. Name = Fault Module Timestamp
    GIS [5]. Value = 4ab0e4d3
    GIS [6]. Name = Exception Code
    GIS [6]. Value = c0000005
    GIS [7]. Name = offset of the Exception
    GIS [7]. Value = 000000000000ad75
    DynamicSig [1]. Name = OS Version
    DynamicSig [1]. Value=6.1.7601.2.1.0.768.3
    DynamicSig [2]. Name = locale ID
    DynamicSig [2]. Value = 1033
    DynamicSig [22]. Name = additional Information 1
    DynamicSig [22]. Value = df36
    DynamicSig [23]. Name = additional Information 2
    DynamicSig [23]. Value = df36e0b278c770807cefd993fac9d654
    DynamicSig [24]. Name = additional Information 3
    DynamicSig [24]. Value = a612
    DynamicSig [25]. Name = additional Information 4
    DynamicSig [25]. Value = a612b538cec9db3725c9e02da3121443
    UI[2]=C:\windows\System32\spoolsv.exe
    UI [3] = Spooler SubSystem App stopped working
    UI [4] = Windows can check online for a solution to the problem.
    UI [5] = check online for a solution (recommended)
    UI [6] = check for a solution later (recommended)
    UI [7] = close
    UI [8] = Spooler SubSystem App stopped working and was closed
    UI [9] = a problem caused the application to stop working correctly. Windows will notify you if a solution is available.
    UI [10] = & close
    LoadedModule[0]=C:\windows\System32\spoolsv.exe
    LoadedModule[1]=C:\windows\SYSTEM32\ntdll.dll
    LoadedModule[2]=C:\windows\system32\kernel32.dll
    LoadedModule[3]=C:\windows\system32\KERNELBASE.dll
    LoadedModule[4]=C:\windows\system32\msvcrt.dll
    LoadedModule[5]=C:\windows\SYSTEM32\sechost.dll
    LoadedModule[6]=C:\windows\system32\RPCRT4.dll
    LoadedModule[7]=C:\windows\system32\USER32.dll
    LoadedModule[8]=C:\windows\system32\GDI32.dll
    LoadedModule[9]=C:\windows\system32\LPK.dll
    LoadedModule[10]=C:\windows\system32\USP10.dll
    LoadedModule[11]=C:\windows\System32\POWRPROF.dll
    LoadedModule[12]=C:\windows\system32\SETUPAPI.dll
    LoadedModule[13]=C:\windows\system32\CFGMGR32.dll
    LoadedModule[14]=C:\windows\system32\ADVAPI32.dll
    LoadedModule[15]=C:\windows\system32\OLEAUT32.dll
    LoadedModule[16]=C:\windows\system32\ole32.dll
    LoadedModule[17]=C:\windows\system32\DEVOBJ.dll
    LoadedModule[18]=C:\windows\System32\DNSAPI.dll
    LoadedModule[19]=C:\windows\system32\WS2_32.dll
    LoadedModule[20]=C:\windows\system32\NSI.dll
    LoadedModule [21] = C:\windows\system32\IMM32. DLL
    LoadedModule[22]=C:\windows\system32\MSCTF.dll
    LoadedModule[23]=C:\windows\system32\nvinitx.dll
    LoadedModule[24]=C:\windows\System32\CRYPTBASE.dll
    LoadedModule[25]=C:\windows\System32\slc.dll
    LoadedModule[26]=C:\windows\System32\RpcRtRemote.dll
    LoadedModule[27]=C:\windows\System32\secur32.dll
    LoadedModule [28] = C:\windows\System32\SSPICLI. DLL
    LoadedModule[29]=C:\windows\System32\credssp.dll
    LoadedModule [30] = C:\windows\System32\IPHLPAPI. DLL
    LoadedModule [31] = C:\windows\System32\WINNSI. DLL
    LoadedModule[32]=C:\windows\system32\mswsock.dll
    LoadedModule[33]=C:\windows\System32\wshtcpip.dll
    LoadedModule[34]=C:\windows\System32\wship6.dll
    LoadedModule [35] = c: Files\Microsoft Shared WLIDNSP. DLL
    LoadedModule [36] = C:\windows\system32\PSAPI. DLL
    LoadedModule[37]=C:\windows\system32\SHLWAPI.dll
    LoadedModule [38] = C:\Program Files\Bonjour\mdnsNSP.dll
    LoadedModule[39]=C:\windows\System32\rasadhlp.dll
    LoadedModule[40]=C:\windows\System32\fwpuclnt.dll
    LoadedModule[41]=C:\windows\system32\CLBCatQ.DLL
    LoadedModule[42]=C:\Windows\system32\umb.dll
    LoadedModule [43] = to C:\Windows\system32\ATL. DLL
    LoadedModule[44]=C:\windows\system32\WINTRUST.dll
    LoadedModule[45]=C:\windows\system32\CRYPT32.dll
    LoadedModule[46]=C:\windows\system32\MSASN1.dll
    LoadedModule[47]=C:\windows\System32\localspl.dll
    LoadedModule [48] = C:\windows\System32\SPOOLSS. DLL
    LoadedModule[49]=C:\windows\System32\srvcli.dll
    LoadedModule[50]=C:\windows\system32\winspool.drv
    LoadedModule[51]=C:\windows\System32\PrintIsolationProxy.dll
    LoadedModule[52]=C:\windows\System32\HpTcpMon.dll
    LoadedModule[53]=C:\windows\System32\HPTcpMUI.dll
    LoadedModule[54]=C:\windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.17514_none_a4d6a923711520a9\COMCTL32.dll
    LoadedModule[55]=C:\windows\System32\hpzjrd01.dll
    LoadedModule[56]=C:\windows\System32\hptcpmib.dll
    LoadedModule[57]=C:\windows\System32\mgmtapi.dll
    LoadedModule[58]=C:\windows\System32\snmpapi.dll
    LoadedModule[59]=C:\windows\System32\wsnmp32.dll
    State [0]. Key = transport. DoneStage1
    State [0]. Value = 1
    FriendlyEventName = Stopped Working
    ConsentKey = APPCRASH
    AppName = Spooler SubSystem App
    AppPath=C:\windows\System32\spoolsv.exe ".

    Hi Marius,.

    As you mentioned that you are unable to find the folder of spool, check if spoolsv.exe is present under C:\Windows\System32.

    Follow these tips and check if that helps.

    Method 1: Run the built-in printer Troubleshooter and check if that helps.
    Open utility troubleshooting printer

    Method 2: I suggest you refer to the suggestion of Gokul T responded on November 6, 2009, for a similar problem.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-7-print-spooler-will-not-start/79938f9a-34b2-4ddf-8101-e20f7fa9c2d0

    You can also consult about it and see the advice given by Freak05, Tuesday, July 27, 2010.

    Print spooler keeps stopping on Windows 7

    http://social.technet.Microsoft.com/forums/Windows/en-us/fd7f46d3-Baa1-4a38-9AD3-dec5426d9297/print-spooler-keeps-stopping-on-Windows-7

    Reference: why I can not print

    Follow the suggestions in the thread and let us know the results.

  • My HP Photosmart D110 printer will not turn off unless I unplug it. Help please!

    Everything works fine on my printer except that it does not turn off unless I unplug it. Can anyone help?

    Is it updated?  Assuming that it is connected wireless network and that Web Services are enabled on the front of the printer: configuration > Preferences > product update.

  • Printer will not turn off

    When I tried to print a photo, 'print picture', "remove red-eye" and "power" button and the indicator "wireless network" will begin to Flash.  I cancelled the print job and tried to put off the printer.  When I push the power button the initial screen appears for about 10 seconds and C2FE0162 (I think) flashes twices for less than a second, followed by the screen turning white and the lights flashing.  I tried unplugging the cables, etc., but can not get the printer to turn off or reset.  Help?

    Hi Frank_Ru,

    I understand that you have an HP printer that keeps giving you flashing lights and does anything currently. I'm sorry to hear that, but he's going to do my best to help you after collecting a little more information

    1. what model HP printer work?

    2. is the printer connected directly to a wall outlet?

    3 have you tried pulling the power cord for a few minutes and reconnect?

    I can't wait to hear back from you, have a nice day!

  • Analysis the message. The printer display never turns off

    I have photosmart all-in-one B211A..., Cq761A.  My computer is the computer, and I use windows XP.

    I get a message in the toolbar of the background screen where the scanner appears with a red x and saying that he could not be contacted.

    I'm trying to get out and it is so fast and another pop-up screen appears which has nothing to do with it.

    In addition, on the print screen will not 'sleep' mode.  He did in a first time has since ceased when this thingee message began.

    Hello debalas

    Is the printer connected by USB or via the network? Have you tried to run the utilities diagnosis HP or HP print and Scan Doctor? If this isn't the case, you can find them on the link below.

  • HP Deskjet 3630: turn off deskjet x 64 when not in service

    I got a warning message, when I connected wireless, telling me that if I let not lit, there is no update. Can someone tell me what happens if I go away, and, in addition, the amount of electricity it will eat?

    Hi @Mouse2721,

    Welcome to the HP Forums! I would try to answer your questions to the best of my abilities. When the printer is connected to the wireless network, she is able to get automatic updates. When the printer is powered off it no longer on the network can not get updates. This does not mean you will have to leave it permanently on, what a message to make you aware.

    Regarding energy consumption, I do not know how much electricity is used when the printer is turned on, but I can assure you that ' this product is designed to reduce energy consumption and save natural resources without compromising the performance of the products. It is designed to reduce the total energy consumption during the operation and when the device is not active. This product is eligible for the ENERGY STAR®, which is a voluntary program established to encourage the development of energy-efficient office products. »

    Figure: Logo Energy Star
  • Computer DV7-1825dx laptop screen turns off at least connected to the HDMI

    I have a Pavilion dv7-1825dx running Windows Vista Home Premium 64-bit.  The other day, I simply closed the laptop into hibernation.  At the time, it was only connected to a printer and a wireless mouse.  The next day, I opened the laptop and it turned on but the screen stays off.  I shut down the computer by holding the power button and then turned back on.  The screen appeared and asked me if I wanted to start Windows normally.  Then, I got the loading screen for Windows.  As soon as he was done loading, the screen turns off and the chime sounded for the login screen.  I repeated again than having the same problem.  I typed my password, but the screen stays off.  Because I often hang my computer to our TV via HDMI, I thought I would try it, and that is, both screens lit.  I then disconnected the HDMI cable and the computer screen exploded again.  Plugged into the HDMI and activated.  I went into options for NVIDIA and noticed that there is an analog display with the screen of television and laptop (up to three screens on the list).  I restarted in safe mode, and the screen of the laptop works great.

    Any ideas on how to solve this problem?  That I can not connect my laptop to the TV whenever I want to use.

    Thank you advance!

    http://www.nvidia.com/object/notebook-Win7-WinVista-64bit-285.62-WHQL-driver.html

    Save the driver on the desktop and install it from there, not in a temporary folder.

    Create a Windows restore point before starting.

    During the installation of the new driver, click on "Custom" and there will be a link to uninstall the old drivers and all of your current settings, this before you install the new driver.

  • Doesn't have installation of Vista updates. He continues to try set up the third update with 0% completion and then it turns off and start again from the beginning. Keep in the loop... Help! There is no error message.

    As above. He is not in windows more simply the third update installation and then turns off computer and restart new since the beginning. Tried running safe mode but without success

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not resolve the problem:

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for

  • I've recently updated shockwave and now videos will not play in firefox, it says that the addon stopped working

    Can you tell me which version of shockwave, I should have and how to upgrade to make it work correctly

  • workflow - several videos of a multicam

    I'm trying to help a local church with their media. I would really appreciate help in the best way to create several videos of a single clip multicam. I import everything from two or three cameras and two recorders audio non - cam, and then create a

  • help to separate all of the data in the .csv file

    Hi all I have a CSV file and sometime I hv to reading one line and then set these parameters of instrument. and then second row and so on... But I always all data as in a line... I had to seprate them so I can give separate value to separate the para

  • Error: Microsoft Visual C++ Runtime Library... Runtime error

    I'm new to this site. I had a problem where a persistent message finally froze my PC. I sent a question and detailed the actual messages, as had been requested earlier (very useful) Member where I asked without the effective message label This is the

  • Rule below refers

    HelloCan someone help me create a rule UNDER a group of notes? I'll have to apply to many documents 200-300 pages, so it needs to be automated.I don't want a rule below in the paragraph reference because style if there is more than one reference, the