PCL5 sample code to print a single text in RGB color

Similar Questions

• PCL5 order or sample code to print colored text gray

  Hi all

  I have a requirement to print PCL5 gray text. I tried the command Escpcl * c #G (# % gray scale), with different values vaissaille 37%, but the text is still to come in black color.

  Below is the code I tried

  ESC* c37GEsc* v4TTest

  Could you please give an example of pcl code to print a Word, 'Test' for color grey.

  Thanks in advance

  Try printing the file attached to your printer PCL5.

  If you use the HP provided shades, they can be quite rude, if you use

  a small font. Refer to chapter 13 (I think), the printed model in reference PCL5.

  Print the joint and come back with questions.

• AppleScript code to print a single sheet of numbers

  Is it possible to print a sheet of numbers with AppleScript (ideally with no dialog)? I am wanting to loop through a set of sheets in a specific order and print them so they will print in this order. Thank you!

  I don't have a printer here to test entirely, but this should do what you want.  The basic approach is to have the AppleScript to say number to go to a journal (from the active sheet of adjustment) and print it.

  The print order follows the order of the names of journal entry on first line of the script.

  SG

  sheetNames value to {"Sheet1", "Worksheet 3", "Leaf 2"}

  Repeat with an s in the sheetNames

  Try

  printSheet (s)

  on error

  display the dialog box "Check the journal names" buttons "Cancel".

  end try

  end Repeat

  to printSheet (shtName)

  say application "Numbers".

  say front document

  calculation sheet current defined in sheet shtName

  print

  end say

  end say

  end printSheet

• Change the display of text field value based on the value (short sample code provided)

  I read around on it for a few days, but I still can't get it works well.

  I have a field of text called "W1SnC1". In fact, I have several domains to execute it. That's why I tried to make the generic script below. Basically, I want to change the properties > form field to "visible but does not print ' if the text field contains ' - '. (As a note side '-' is the default value). I put the script in the following properties > validate > run the custom validation script:

  var elemName = event.target.name;

  If (event.value == '-')

  {

  elemName.display = display.noPrint;

  } else

  {

  elemName.display = display.visible;

  }

  Its odd but once in a while it works :-) I think I must be clicking on something that the queues of validation in these moments. However, I need some general help. Did someone mind giving advice on what to change?

  Try something like this:

  Event.Target.Display = event.value = "-"? display.noPrint: display.visible;

• Text of RGB in PCL5

  I am trying to print an arbitrary text of color on a PCL5 printer, but am not having much luck.

  Each example and only described how 'simple colour' (* r3U) text; I wish I could do the RGB color.

  I managed to use CID (* v #W) * MORE * config pallet settings (* v #a #b #c #I) and it works great... but it seems I'm missing something easy to do not have to define 16 M colors at the beginning of each document.

  Did the thing of direct-index (* v6W [2,3,0,8,8,8]) ONLY graphic work, leaving us having to set each text color before using it if it is not in the simple color list?

  To be clear, I do (* v #S) to the foreground color and I do * GET * color, according to the options I choose for * v #W, but they are far from the RGB colors, I expect them to be (mainly blue, black, red, white for RGB and yellow, cyan, black and gray to CMYK color palettes).

  TIA!

  >> ... Did the thing of direct-index (* v6W [2,3,0,8,8,8]) ONLY work on the graphics...

  >... must set each text color before using it if it is not in the simple color list?

  I believe that this is the case; for the text, you must select a color via a palette index, and with pallets with 3-> 8-bit by index, the default palette has specific colors (black, Cyan, Magenta, red, green, yellow, blue, white) defined for 0-> 7 and black for > 7 indices indices.

  >> ... I do (* v #S) to the foreground color and I do * GET * color...

  >... but they are far RGB colors, I expect

  The technical of PCL5 color Reference manual describes a number of other sequences (rendering algorithm, user defined Dither Matrix, Gamma Correction, table colors, look at an Illuminant) which can affect the color rendering.

  I'm not familiar with them, so cannot provide advice on the amount of effect they would have on your symptoms.

• The JavaScript Code to print multiple Page ranges in Acrobat

  Hi all

  I am very new to Javascript (used for the first time this morning) and was looking for help.

  I built a pdf file in Acrobat that I need to print on a very regular basis.

  However, when I print, there are only some of the pages I need to print as opposed to the entire document.

  I put in a print button that executes code when you press on below:

  This.Print (true, 1, 25);

  This.Print (true, 27, 28);

  This allows me to print two different page ranges, but it separates into two different print jobs.

  Y at - it a code that will allow me to put them in the same print job, so that it selects the pages 1-25, 27 and 28, rather than have them separately?

  I am currently using Adobe Acrobat X Standard.

  Any input would be much appreciated.

  Thank you!

  Acrobat/Reader 11 allows you to use the printRange property of PrintParams object that is used with the print statement: http://livedocs.adobe.com/acrobat_sdk/11/Acrobat11_HTMLHelp/JS_API_AcroJS.89.1013.html

  See the sample code included in the link above.

• Select code from CBWMS makes the text jump around

  Just upgraded to Dreamweaver CC and found an annoying "feature" that makes the Skączcie code when the selection of text in the long code wrapped.

  For example if there is a long single line javascript code and you select somewhere in the Middle, he instantly pushes this line to the following line similar to a line break (even if it isn't actually inserts a break of)

  This is a feature that can be disabled? Or I wonder if it is a question with my Mavericks install where reinstall it will help.

  Thanks in advance to all.

  I think that this problem is also solved with Nancy O solution:

  "Try to disable the speech recognition & dictation in the settings of your system."

  http://forums.Adobe.com/message/6147142#6147142

  Hope it's OK for this mark as 'correct' show that it has been resolved for someone else, that this could affect.

• How to print only the text selected on a Web page and not the whole page?

  After you have selected a segment of a web page for printing, I go to the icon for printing and that clears the selection, leaving only the whole page as the selection to print.

  "The feature to print just selected text in a Web page doesn't seem to be a function of Firefox."

  If you use the toolbar print button, from the preview window before printing 29 Firefox open rather than the "Printing dialog window" as with the previous versions. using the button print in the upper left corner of the preview, takes you to the "print dialog window. "selected text" does not persist through the preview window; no way to print a selection of text using the toolbar print button. (a bug report has been filed on this change - regression.)

  As cor - el mentioned if you start printing via the keyboard, instead of using the button print, you should be able to print a "selection" of the text.
  WFM - works for me

• HP Photosmart 7520E-all-in-one: black prints fine for text but the black areas in photos come out green

  Black ink works very well for text and text with little color, but when you print photos (on HP Advanced paper which is recommended), printed black areas aqua green, or deep.  Other colors are fine.  How can I fix it?

  The probable cause is a cartrdige Photo print does not correctly.  In the paper here troubleshooting steps can help solve black photo print does not correctly on your printer Photosmart 7520.  The Photo cartridge is on the far left of the printer.

• my printer takes half an hour to print a single page

  My hp5510 suddenly began to take half an hour to print a single Web page.  Yet, sometimes it prints quickly.  The colors are also washed in or very weak or very dark, even though I have installed two new ink cartridges.  It happened after an update of Windows, I think.  HPDR shows no problems with it.

  Hello hsmof5.

  Please, try to remove and reinstall the cartridges and perform the alignment of cartridges from the Toolbox.

  See you soon!

• I would like to know how to print a photo/text, but I need to flip/market back, he

  Print number...

  I would like to know how to print a photo/text, but I need to flip/market back, he

  so when you print on a t-shirt transfer, the text goes out of the way

  necessary. I don't have a photo program/CD but just use Windows

  Photo Gallery.

  Any ideas?

  Open the photo in Windows Paint and go... Image / Flip rotation / Flip Horizontal.
  Save your picture changed with a different name if you keep the original then go
  TO... File / print.

  More information on Windows Vista - paint:

  How to rotate (Flip) an Image using Microsoft Paint
  http://maximumpcguides.com/Windows-Vista/how-to-rotate-an-image-using-Microsoft-Paint/

  Open Paint
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Paint

  With the help of paint
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-paint

  Paint tools
  http://Windows.Microsoft.com/en-us/Windows-Vista/paint-tools

• OfficeJet pro 8600 print a single vertical black line when using the charger

  OfficeJet pro 8600 print a single vertical black line when using the charger

  Hi @realestatejeann,

  I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.

  Vertical stripes, lines or streaks on Copies, faxes or scans.

  If you need help, let me know.

  Good day!
  Thank you.

• Error code "Windows printer Interface does not.

  Original title: print queue stüch document display in the suppression of landmark when he is not removing or printing when it is not printing printer interface window error msg does not have already reinstalled driver 4 times turns on is quite what is wrong

  error code "Windows printer Interface does not ' happens too times I have re installed printer drive 5 times also status on a print document shows in printing when printing does not then when I try to cancel the document it shows deleting but its not sound help please frozen. Thanks richard

  In order to answer your question, you need to tell more about your hardware system configuration.

  No assumption here:

  (1) the printer must be compatible with your operating system. Follow the program and manual installation. Normally, these measures ensure impeccable installation.

  (2) re - install the printer before removing all previous printers will cause you problems.  Delete all incidents related to this printer software.

  (3) most of the software are installed everything first, without the connected printer. You will need to follow the guests. Remove the CD. The system receives a reboot, the power and the USB cable are attached, you turn it on and the computer detects the device. So actually, it installs the appropriate driver package. This is typical.

• HP LaserJet Pro CM1415: Printer will only print a single document. Bloggy queue and I need to restart the computer to print

  Printer will only print a single document. Bloggy queue and I have to restart my computer to print more than a single and repeat for each print job... very annoying. She's been doing this for printing the PDF, chrome, Word document, etc.

  Hello.

  Please, try the suggestions you find here:

  http://support.HP.com/us-en/document/c022054777

  Dovid

• Error.4003 in sample code API fixed Kitchensink photo

  When you play with the camera API in the sample code Kitchensink, a reproducible 'Error.4003' can be generated.

  How to reproduce the error:

  (1) execute takeVideo(), take a video and record video, then

  (2) run takePicture()

  The screen will remain black, and if the shutter is touched, the 4003 error.

  Difficulty:

  In the file camera.js, in the onVideoCapture function, change the code

  video = document.createElement('video');

  TO

  video = new Video();

  Hope this helps.

  I guess I have to reply to my own post in order to make "resolved."