PCMCIA card will not install on Satellite L30 - 10y

Similar Questions

• Second FireWire PCMCIA card does not work on Satellite A110-178

  Hello!
  I tried to use the PCMCIA card as the second controller FireWire from different producers, but they can't take it.
  Sweex - PCMCIA Firewire kaart
  laptop computer en PCMCIA USB FireWire 1394 Combo CARDBUS

  I really need the second FireWire controller on my Toshiba Satellite A110-178.

  Thanks Ben

  Hello

  The Satellite A110-178 PSAB0E supports a Cardbus 32-bit / PC - Card 16-bit slot and you can ONLY use cards PCMCIA type II

  Please do not forget that your PCMCIA firewire card supports hardware specifications listed above.
  If not; you will need to purchase another compatible!

  Best regards

• Drivers Ati Vista will not install on Satellite Pro A100 PSAACE

  I saw a number of other users in the forum with the same question. I looked a little further on my machine, and it seems the driver saves oneself is not worl or there is a hardware fault with the graphics card.

  Here, it's put him the catalyst installation error report...

  Catalyst® Install Manager
  Installation report
  Thu, July 12, 2007 13:28:08

  Hardware information
  Name of the ATI Mobility Radeon X 1400 graphics card
  Manufacturer ATI Technologies Inc.
  Device ID 0 x 7145
  Vendor ID 0 x 1002
  Code of the class 0 x 030000
  Revision ID 0x00
  ID subsystem 0xff10
  Subsystem vendor ID 0 x 1179
  Other materials

  Existing packagesATI Catalyst Install Manager
  Catalyst Control Center
  Microsoft Visual C++ 2005 Redistributable

  Packages for installation
  ATI Catalyst Install ManagerFinal status:
  Version of the article: 3.0.504.0
  Size: 20 MB
  DriverFinal ATI display status: failed
  Version of the article: 8.31.100.32
  Size: 90 MB
  Catalyst CenterFinal status:
  Version of the article: 2.0.2519.38216
  Size: 150 MB
  Microsoft Visual C++ 2005 RedistributableFinal status:
  Version of article: 7.3.0.0
  Size: 10 MB

  Other devices detected

  Error messages
  Driver installation: installation failed
  Installation of the application: failure

  After the execution of the executable, I tried to install the driver maually locate the files in the driver package, while windows recognizes the inf file, it gave an error saying that it could not read the device...

  Hello

  What graphics driver you used?
  One from the ATI Web site or the graphics driver for the Toshiba page?

  You must use the graphics driver on the page because Toshiba that these drivers are designed and specially modified for Toshiba laptops!

  I tried to use the graphics drivers for example, nVidia page, and I was not able to install it automatically.
  I find on this forum that the graphics drivers from Toshiba are slightly changed to prevent overheating of the graphics card.

  Due to a high performance graphic map of the temperature increases and can damage some parts inside the laptop.
  The graphics driver prevents the increase in temperature and slows down the performance of the graphics card. If temperature decreases the performance increases.

• The BIOS update will not install on Satellite P10

  I have tried and failed to update the BIOS of my Satellite P10 (PSP10E). I downloaded the bios - 20070807133603.zip because it is the update available for this machine.
  When I extracted it and run the SETUP program. EXE file I get a message warning "rom size incorrect." The other extract file is al00200a.rom.

  Can anyone help?

  Found the answer here - [http://support.toshiba-tro.de/kb0/TSB59014X0000R01.htm] - via Google.

  Fundamental problem, is that I was by double-clicking the zip instead of a click right-extract all.

• CD player does not meet the Satellite L30 - 10Y

  When I get a CD in the CD player and the CD player is saying all the CD are empty, even when they are not.

  Can you help me?

  Hello

  You don't have too much problem with CD or DVD only?

  Do you see in Windows Explorer if there are some files on it?

  Tried a recovery facility or you can boot from a CD? It may be a disk problem but first evaluate if you can start or not s. If you can boot from a CD, it s a software problem or windows.

  Bye!

• Satellite 2410-413: USB2 PCMCIA card does not work

  Hello. This is my first time on a forum, and my English is bad.
  I tried to install a card PCMCIA 4 port USB 2 (hw & sw) on my Satellite 2410 413 in order to use a dongle of DTV (hw & sw).

  This will not work: ports seem to be declared straight into the computer, but in fact, a simple key memory 64 MB USB-2 [a Sony "micro-vault" key), won't work, and neither will the Winfast DTV dongle.]

  Paradoxically, both the key mem will work on any of the three USB-1 ports, and the DV dongle will light on any port USB-1. The PCMCIA 4 port USB 2 card is new. I can't locate the source of the problem.

  Could someone help me with this issue?
  Thank you in advance for your answer. Here it is (maybe?)
  Another way of formulating the question: how USB ports are managed by the system?

  Hello Rasta

  Sorry, but I think that this issue should be the right one for producer PCMCIA. Try to visit the support page. You might find answers.
  Believe me on this path it is not easy to say why this happens. Toshiba is perhaps responsible for the functionality of PCMCIA card, but not used the card.

  Good luck!

• Wireless network adapter will not install on Windows XP Pro-life said a wireless network card is disabled.

  I bought a Skylink® USB 2.0 802.11 g / n Mini adapter with 3dBi antenna wireless network. It will not install on my Windows XP Pro.  Said A WLAN card is disabled.  What?  I don't know what that means.  What can I do?

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  Also check with Skylink® support site for more information about the issue.

• Installing WXP on Satellite L30 - 10Y

  Hi all

  I have a Satellite L30 - 10Y (PSL33E 03L031EN) (about 2 years), it is running Vista (installed come) and I'll replace it with XP pro SP3.
  I already have the drivers (from the Division of driver Toshiba), but I wonder if there are any issues that anyone knows how I could run in this case?

  I installed OS to my house several times, built offices with absolutely no problems whatsoever, but various articles I read there seems to be a bit of a 'ball game' different when it comes to laptops?
  Also I have Vista disks more so if XP will not install I can not simply go back to Vista.

  Tips, advice or warnings very welcome...

  Thanx

  ~ Q ~

  Hello

  Your laptop is supported for Windows XP Home edition, and there should not be any problems at all. For installing WXP using Windows XP SP2 home edition.
  Download page for all the drivers, tools and utilities that you can find on Toshiba.

  You can also find document Setup Instructions. Install all the stuff of Toshiba following this order of installations. It is very important.
  If you help please let us know.

• Satellite L30 - 10y does not start - BSOD

  I have a laptop Toshiba Satellite L30 - 10y.
  The problem is that the laptop does not start.
  I turn on the computer and the screen turns white and bottom screen then comes up for a fraction of a second that says...

  "stop: c0000218 {Registry file failure}".
  The registry cannot load the hive (file):
  \Systemroot \System32 \Config \DEFAULT
  or its log or alternation.
  It is damaged, missing, or not accessible writing. "

  I was wondering if anyonecould help me, let me know what this means and what I can do...

  Thank you very much

  Adam

  Hello Adam

  Here two interesting documents of Microsoft, but I really don't think that it will help you
  http://support.Microsoft.com/kb/307545/en-us
  http://support.Microsoft.com/kb/830084/en-us

  Maybe the best solution for you is to use recovery media supplied and install OS again. After that it all will again be OK.

• HP Pavilion 550-055na: new disk will not install the new operating system

  Hello

  I bought a new HP Pavilion 550 - 055na with Windows 8 a month or two ago but want to use Windows 7. However, I decided that I will keep the hard, the PC came with, and have the option of Windows 8 in future if I want. So, I'm installing Windows 7 on a new hard drive.

  My problem is that the new copy of Windows 7 will not install on my new hard drive.  I get:

  Violation of secure boot

  Invalid signature detected. See the policy in the configuration of secure boot

  Then me to a black screen after I pressed Enter/Ok, who said the following.

  Check the presence of the media...

  Media present...

  On IPv4 PXE boot.

  If I press F12 on power on, I get a blue box asking me to select a boot device. The only options are:

  Realtek PCIe GBE Family Controller IPv4
  

  Realtek PCIe GBE Family Controller IPv6

  and the output by using the arrow keys

  How to change the secure boot strategy?  If I do, it means that I can install my 7 can I on my new hard drive? Also, providing that I do, I always will be able to use my Windows 8 OS drive after changing the secure boot strategy?

  Any help would be appreciated to greately.

  Sincere greetings

  DJ

  Hello:

  You have to enable the legacy mode and disable start-up secured in the BIOS to be able to install and run W7.

  Please see this link to find out where these settings... this references adding a video card, but this is how you change the settings no matter why you need to change.

  http://support.HP.com/us-en/document/c03653200/

• Software CyberLink will not install on Win 8

  H8 1380 t CTO, Intel i7 3820 processor. 16 GB of DDR3 Ram PC3-12800 memory. FRIEND bios (UEFI), Version 2.14.1219 (current).
  Pegatron Motherboard-IPIWB-PB (Pittsburg) Audio Beats. AMD, Radeon HD 7570-1 GB graphics card.

  Hello

  Installed Win 8 (own) on a second partition, (dual-boot factory Win 7 and Win 8 on the second partition). Installed all the software and drivers from HP for this system without any problems except for the elements of Cyberlink,"error 1603" code.

  Any suggestions on why Cyberlink programs will not install?

  Thank you

  Hello

  Check the compatibility of your products from Cyberlink here.

  The HP position maintenance for Cyberlink is only an update.

  If you have installed under W7 from Cyberlink, then try the "check compatibility" button to see if improvements are required.  So just try to install Cyberlink under W8 then click on the products tab Compatibile.

  BTW, nice PC.

• Windows Vista Ultimate SP2 will not install update KB2378111 or install downloaded programs and returned with error code 80070570

  Hello... my computer will not install update KB2378111 with a code error 80070570.  In addition, I can not install all programs downloaded from the internet, specifically my anti-virus software.  I'm running without any software antivirus at this time.  I ran the most recent Microsoft malicious software removal tool and it showed that there is no problem.

  I'm running without any antivirus at this time software

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: see the "to install Windows by performing a clean install" (or "reinstall Windows Vista") http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista article

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

  VERY IMPORTANT! -Online any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Will not install KB947821. Error code 80073712.

  Will not install KB947821. Error code 80073712. Although the update KB978207 has been correctly downloaded and installed after that. All this happened after the uninstallation of McAfee antivirus. Also, I'm sure that for this reason, IE8 now does not load all run any activex so content. Downloaded and run the uninstall McAfee tool but no change.

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the page following before otherwise connect the machine to a network or the internet and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. Even if the trial version is not enabled, you MUST uninstall it and download/run the appropriate removal tool before you install updates, Windows Service Packs or IE updates and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• FreeCell card will not stay up

  When I play freecell, that my card will not stay up in the third blockit falls in can help you

  Hello

  -What version of Windows is installed on your computer?

  If you use Windows 7, follow the steps mentioned below and get back to us with the results.

  Uninstall and reinstall the game.

  a. Click Start, in the start search box type "appwiz.cpl" and press ENTER.

  b. click on turn Windows features on or off.

  c. clear the check mark before the games.

  d. click OK.

  e. restart the computer.

  f. re - turn on the device by placing a check mark before the games.

  g. restart the computer and check if the games to launch successfully.

  Reference:

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  I hope that helps!

• I just bought a Windows 7 Edition upgrade Home Premium to professional, but it will not install and told me to get a dfferent key.

  I just bought a Windows 7 Edition upgrade Home Premium to professional, but it will not install and told me to get a dfferent key.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade