PDIHWCTL service could not start

Similar Questions

• Secure socket tunneling protocol service could not start

  I was not able to start Remote Control Access Manager as a dependent 'Secure Socket Tunneling Protocol Service' service could not start.  What could be the reasons for Secure Socket Tunneling not start?  They are necessary to secure to a private network using a web service business link.

  Hello

  Please report the problem to Microsoft Community.
   
  The question you have posted is related to professional level support.
   
  Please visit the link below to find a community that will support what ask you:
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/thread/2af0d98e-3404-46D6-8def-1bed51f6671e
  Note: Click on a question and move on.
   
  I hope this helps. If you have any other queries/issues related to windows, write us and we will be happy to help you further.

• NAS SSO service could not started.

  Hello

  I have a problem that I can't start the SSO service on my NAS server in inline mode, but the service works well on my two NAS that are deployed on the OOB mode.

  It gives an error that could not start the service please chk configurations. I checked the logs nas_server.log I get the following error have any idea abt it

  DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOUser = shkcas04

  2010-09-21 12:02:16.997 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOUser = shkcas04:DURATION = 0

  2010-09-21 12:02:17.003 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOPass = Cisco1234

  2010-09-21 12:02:17.003 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOPass = Cisco1234:DURATION = 0

  2010-09-21 12:02:17.008 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOKdc = pkshv002.apac.ad.ici.com

  2010-09-21 12:02:17.009 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOKdc = pkshv002.apac.ad.ici.com:DURATION = 1

  2010-09-21 12:02:17.014 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSORealm = APAC. AD. ICI.COM

  2010-09-21 12:02:17.014 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSORealm = APAC.AD.ICI.COM:DURATION = 0

  2010-09-21 12:02:17.019 + 0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:save

  2010-09-21 12:02:17.021 + 0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:save:DURATION = 2

  2010-09-21 12:02:17.026 + 0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:startSSOServer

  2010-09-21 12:02:17.026 + 0500 WARN com.perfigo.wlan.jmx.adsso.GSSServer - server did not work...

  2010-09-21 12:02:17.026 + 0500 INFO com.perfigo.wlan.jmx.adsso.GSSServer - server from the server...

  2010-09-21 12:02:17.026 + 0500 INFO com.perfigo.wlan.jmx.adsso.GSSServer - GSSServer - SPN: [[email protected] / * /]

  2010-09-21 12:02:17.026 + 0500 INFO com.perfigo.wlan.jmx.adsso.GSSServer - GSSServer - construction list kdc for domain pkshv002.apac.ad.ici.com

  [2010-09-21 12:02:18.470 + 0500 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory DEBUG: adding socket: d3c940 [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.92.15.1,port=15873,localport=1099]]

  2010-09-21 12:02:25.695 + 0500 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager TRACE is running: {0.85,0.3, [0:0:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300

  2010-09-21 12:02:25.695 + 0500 TRACE com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager has nothing to do... 10.92.15.1:0:1

  [2010-09-21 12:02:25.695 + 0500 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager PATH will sleep: delay of {0.85,0.3, [0:0:0}] = 20000

  2010-09-21 12:02:37.022 + 0500 com.perfigo.wlan.jmx.adsso.GSSServer ERROR - Unable to start server... pkshv002.apac.ad.ici.com

  2010-09-21 12:02:37.022 + 0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:startSSOServer:DURATION = 19996

  2010-09-21 12:02:37.061 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOState = 0

  2010-09-21 12:02:37.061 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOState = 0:DURATION = 0

  2010-09-21 12:02:37.066 + 0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:save

  2010-09-21 12:02:37.067 + 0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:save:DURATION = 1

  2010-09-21 12:02:39.598 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

  2010-09-21 12:02:39.598 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

  2010-09-21 12:02:39.603 + 0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

  2010-09-21 12:02:39.603 + 0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

  2010-09-21 12:02:39.608 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

  2010-09-21 12:02:39.609 + 0500 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 1

  2010-09-21 12:02:39.615 + 0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

  2010-09-21 12:02:39.615 + 0500 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - invoke:

  Concerning

  Waqas

  Waqas,

  From a session SSH on the CASE, can you ping the server and post the answer?

  Faisal

• The inventory service could not start

  Hello

  We have improved vCenter Servcer 5.x to 6.0, which worked very well.

  As we put it at level ESXi also we close vCenter [a Vm] and brought back, our single sign on Windows domain was also corrupted.

  Now the field is back and vCenter VM, however vCenter Server Service does not essentially depends on Service of the inventory that fails to start.

  On the web console, I get the error "503 Service unavailable (unable to connect to the endpoint: [class Vmacore::Http:NamedPipeServiceSpec:0000000001D6D190] = _serverNamespace / _isRedirect = false _pipeName = \\.\pipe\vmware-vpxd-webserver-pipe).

  All discussions I found see SSO re-registration due to changes in the AD, but they use 5.5 x command that I couldn't find in 6.0.

  There is no SINGLE authentication service in 6.0 too and location of the log files is changed.

  What is the location of the new log file associated with the service of inventory and how to fix this SSO with service Invertory question.

  Thank you

  Hello

  If your vCenter server is on windows, then the inventory service log location is C:\ProgramData\VMware\vCenterServer\logs\invsvc.

  You can check vpxd or vsphere_client_virgo.log for details of the failure. You can share the beam of support for more details?

  Concerning

• A small flag appears on the bottom of my screen that says activate security service Windows, but when I try to turn on it says could not start the Windows security service

  Original title: HELPPPPP

  My computer a little flag in the background with a x... said red it turn security service windows, but when I try to turn it on... it said windows security service cannot be started :/

  Hey ChelseaHarris,

  Take a look at two responses in the thread below the link to see if they allow the Windows launch security service:
  Could not start the Windows Security Center service.

  If these steps do not help, try to run a full scan using the Scanner from Microsoft which can be downloaded using the link below:
  Microsoft safety scanner

  Hope that helps.

• Windows ICS Services stopped & could not start the windows firewall in windows xp professional sp2.

  I am facing a problem regarding the ICS Service & could not start windows in windows Xp service pack 2 firewall, whenever I have install windows Xp Sp2 and join the network, the ics services ceased and the windows firewall. While windows firewall service starts when I restart my computer. But after some time stopped again had services that I'm cold does not access the readers of part, could not access network resources.this problem occurs only on windows xp sp2, when I install windows 7, then all better.i work fetch on different forums, apply the settings but I'm not able to solve the problem on base all the time. Someone tell me the permanent solution of this problem, on a forum, I see this solution,sharedaccess.reg and settings.but I am still unable to find a permanent solution.

  Someone tell me the permanent solution of this problem?
  
  
  
  

  Hello

  Here are a few troubleshooting steps that you can try to solve this problem. See the following links.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:

  http://support.Microsoft.com/kb/322756

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  If you have additional problems, please reply to this post and we will be happy to help you further.

• HPWSProAdapter service does not start

  After last MS Security patches application (February, 2013) on a Server Windows 2008 R2 HOSTS, HPWSProAdapter service could not start.

  "The HPWSProAdapter service failed to start due to the following error:

  Service has failed to demand launch or timely control.

  "A timeout was reached (30000 milliseconds) waiting for the HPWSProAdapter service to connect."

  This error is leaving me with some latest status "Device communications error" HP printers because they depend on this service to HPWSProAdapter.

  Any idea?

  Open the registry, go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HPWSProAdapter

  Change multiple channels environment

  Insert COR_PROFILER = {03191964-0505-1966-BD0E-E92B0C04964F}

  so it will look like this;

  COR_ENABLE_PROFILING = 1
  COR_PROFILER = {03191964-0505-1966-BD0E-E92B0C04964F}
  SystemRoot = C:\Windows

• Hello services did not start, check the sufficient privileges to start system services

  I have a Dell desktop computer - over 6 years running windows xp. I've been using itunes for several years, update without problem until a couple of months ago when I got this error "Hello services could not start, check the sufficient privileges to start system services. I tried to delete everything from itunes etc following the instructions from apple forum - but still get the error. I tried to restart Hello in the service of my computer menu - but now it doesn't show even Hello - I have tried to load Hello - same error... help - I don't want no Hello == I just need the latest version of itunes - now I have nothing. !

  Hello the long beach of dl,

  You need not run Hello service to have iTunes on your computer.

  You can look in the event viewer and see if there are errors on iTunes or the Hello Service.
  By default, the Hello service is started and the startup type is set to automatic.
  The path to the executable file is: C:\Program Files\Bonjour\mDNSResponder.exe. You can search and find this file?

  I find a 3rd party software removal tool and then have it remove all traces of iTunes, including the Bonjour service.
  Use the control panel to uninstall iTunes and software components in the following order:

  1. iTunes
  2. QuickTime
  3. Apple Software Update
  4. Apple Mobile Device Support
  5. Hello
  6. Application of Apple Support (iTunes 9 or later)

  Download the latest version of iTunes for Windows, and then try to install again.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Services do not start. I get error 5 - BFE, DHCP, & DPS; I get error 1068-IKE, IPsec Service & network list

  Vista Home Premium SP2

  Error 5: Access denied

  Cannot start BFE Base Filtering Engine service

  DHCP Client service

  Diagnostic policy service

  Error 1068: The dependency group or the service could not start

  IKE and AuthIP IPsec Keying Modules

  IPsec policy agent

  Network list service

  Error 1073741288

  Network location awareness

  I checked the forum after forum with no luck.  Any ideas?

  Hello

  ·         What services can you try to start?

  ·         What is the problem you are having with the computer?

  ·         Logged in Administrator?

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Your computer is on the field?

  Response with above information to better help you.

  I suggest you to follow the steps in the link and check if the problem occurs:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/Windows-could-not-start-error-1068-the-dependency/7963d72a-5d73-44fe-8316-058c46235737?page=1

• Could not start the time service windows on the local computer 2 error

  Cannot update the system clock of time Internet.

  After double click to display the time in the taskbar, the Date and time properties window appears.

  Then I time tab-click Internet, and then click Update now - this produces the following message...
  "Year error occurred getting the status of the last synchronization." The RPC server is unavailable ".
  Then I clicked on start > Control Panel > Administrative Services > Services > time Windows
  I click Start the service and get the following message...
  "Could not start the time service windows on local computer."
  "error 2: the system cannot find the file specified."
  Help!  What now?

  Hello

  Glad to know that the problem has been resolved. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

  Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

  Hello

  1. what application or antivirus security suite is installed and your current subscription?

  2 Norton (another) or a McAfee application ever installed on this machine?

  3. What are the fix applications that you used so far to try to fix this problem?

  Try the next method and check if that helps you with the question of the 127 error you receive.

  Method 1: Rdding the DLL file by doing the following:

  1. Click Start and click Run, in the search box type CMD and press to enter.
  2. right click on CMD in the list and click "Run as Administrator".
  3. type the following command and press ENTER. Regsvr32 msvcp71.dll
  4. close the command prompt window.

  Method 2: run the file system (CFS) Checker:

  (Note: you need an XP installation disk to start the System File Checker search.)

  The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

  1. click on start, and in the box to start, search type CMD
  2. right click on CMD in the list and click "Run as Administrator"
  3. type the following command and press ENTER. Sfc/scannow
  4. close the command prompt window.

  For more information on scan SFC (System File Checker), please look in the link mentioned below.

  http://support.Microsoft.com/kb/310747

  I hope this helps.

• Unable to start Windows Media pPlayer 11 to share media: Error 1068 dependency service or group could not start

  1068

  Cannot start media player 11 to share media. Error 1068: the dependency service or group could not start

  Hello! I found the solution to my problem here:

  http://wiki.answers.com/Q/Why_do_I_get_an_Error_1068_when_I_try_to_share_my_media_in_WMP11_in_WXP_pro_sp2_start_service_in_services

  It is possible that it would be more useful for someone.

• at the start of geta pop up = document Manager service could not be started, check the filter of the vault is loaded and run

  starting to get a pop up = document Manager service could not be started, check the filter of the vault is loaded and run

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  Method 1:

  I suggest you uninstall and reinstall download System Manager and check if the problem is resolved. See the article mentioned below.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Could not start the Security Center Service

  I clicked on Windows security alerts, it showed "The Security Center Service is disabled".  Then I clicked "Activate now", came a "Could not start the Security Center Service" message.  Please tell me what I need to do.

  Thank you very much!!!

  Longpo

  See if these are useful:

  http://support.Microsoft.com/kb/2519899

  OR

  http://support.Microsoft.com/kb/2510301

• Windows could not start the background service Itelligent transfer service on local computer. 87 error: The parameter is incorrect

  I had a crash dump blue screen, tried solutiions to the problem and told me to go to windows update and download all windows updates. downlownloading all updates failed and I got the error.

  Code 80246008

  Click on get help with this error and was instructed to go to services and start the background intelligent service services, it gave me the error message;

  Windows could not start the background service Itelligent transfer service on local computer. 87 error: The parameter is incorrect

  Not very computer savvy! no idea what it all means or what I would do to this topic! Thanks a lot for any help

  Try this:

  To change or restart the Service (BITS) Background Intelligent Transfer

  1. Open administrative tools by clicking the start , clicking Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Right click on the service of Intelligent Transfer (BITS) background and then click Properties.

  4. Under the tab general, next to startup type, make sure that automatic (delayed start) is selected.

  5. Next to Service status, check whether the service is started. If not, click Start.