PDM is free?
Hi all
My company has a PIX 515 and modernize the software to 6.2. And I also want to easily use the PDM to the firewall configuration. I know that the MDP is included in a new pix if you buy software 6.2. But now I get through the firewall. I need to intall the PDM in it. But I don't know if the PDM is free and if I can install it when I can get the image of PDM. Can anyone tell me about this?
Thank you!
Best regards
Teru Lei
PDM is free and you can download it if you have a cco user.
If you have the image, you just run the firewall in enable mode
Copy tftp: flash: pdm
then add
Enable http server
netmask local_ip http interface
Tags: Cisco Security
Similar Questions
-
File from an executable of LabVIEW PDM
Hey, I am writing a program that measures a bunch of stuff and saves to a TDMS file (as it is by far the easiest method and fast, I found). I was wondering, once that my program is converted into an executable, files are still viewable TDMS in Excel/OpenOffice, or viewing requires NI Diadem. Computers, on which the executables will run will not necessarily installed LabVIEW.
I would like to try myself, but let us, I am not worthy of a developers license...
Thanks in advance
Doug"are the PDM lines visible in Excel/OpenOffice?
Yes! the format of a file *. TDMS files do not change between the development environment and an application built.
That being said, the imported PDM of addon for Excel automatically installs with the LabVIEW development system and may not already be on target when you deploy your executable. Do not fear however! the addon TDMS for Excel is FREE and available for download here
-
Hi all!
I am facing a weird problem with my vi. The PDM write in my case/State records "Transformation", the data processed for each channel of each race. However, instead have a different set of data for each race, I get the same set of data for all lines. It is basically just duplication of first series of data in each row of each series. And the strange thing is that if I use the tool to probe on the son will tdms writing in the same case, it records the actual data in respective rows. with probe tool, it looks like good data in and record the correct data, without it, it duplicates only the first line. can someone please understand what going on with her?
I have attached the VI. While at it, feel free to provide your comments/suggestions on me vi design, so that I can work out which actually better.
I appreciate all the help in advance!
Nilesh-
I thought about it. In case of treatment, I was reading from the same group eaverytime. all data processign was same. All I had to do was get the current value of the Group since the property node and the wire to tdms playback function.
-
error "memory is full" with writing a file permanently PDM
Hello world
I know that the problem of "memory we complete" has been often discussed in this forum, and I have read these messages, but still could not solve the problem.
We have implemented a test function based on PXI5412 and 5122 modules. The program generates arbitrary waveforms to excite a DUT and acquires its response with digitizer and writing of the data acquired in a TDMS file (~ 40 MB for each measuring point). The program works fine in single point mode, i.e. in quiet passages. However, when I try to run it continuously in a loop TO measure several (up to 1,000) points, the program is always interrupted at halfway when ~ 10 GB of data is recorded with an error "memory is full".
My computer has 4 GB of RAM and the operating system is Windows XP Professional 32-bit. I checked the RAM usage when the error "memory is full" happened. in fact we at least 2.5 GB unused. I learned that maybe it's because he is not a continuous free space in RAM for data. It is also suggested to increase virtual memory to 3 GB for Labview by modifying the boot.ini file. But after I did the program meets still another error "Invalid TDMS" the file reference, and so I could not write all data to a file of PDM.
I joined the part of logging of data of my code here. Is there a another way around the problem of memory, as using the same block of memory for buffering of data between the memory of the digitizer and the hard drive?
cheney_anu,
I need to know your details of tdms files before I could provide a buffer appropriate setting.
for example,.
The current design: you write a tdms 40 GB file that contains 1000 groups (a point a group), each group contains 1,000 channels and each channel contains 1 d I16 table with 20 M of length. (Note: this 40 GB tdms file contains 1000 x 1000 = 1 M channels)
Change:, you could write 1 d I16 table instead of table I16 2D, which could reduce the number of channel 1 M 1 k, and then reduce the memory usage.
New design: you write a tdms 40 GB file that contains 1000 groups (a point a group), each group contains 1 channel and each channel contains 1 d I16 array with length 20G (for each point, call 'TDMS write' 1000 times in a "loop For ' and every time write 1 d I16 array with length 20 M). (Note: this 40 GB tdms file contains 1000 x 1 = 1 K channels)
-
I have the following code. She ran without error, but not *. TDMS file was created. Someone could tell me error? I'm new to functions DIAdem.
//==============================================================================
//
Title: Application of command line
Purpose: A brief description of the command line tool.
//
Created the: 09 12, 2012 at 10:28:28 by xpertsolutions.
Copyright: xpert Inc.... All rights reserved.
//
//==============================================================================//==============================================================================
Include files#include
#include
#include//-----------------------------------------------------------------------------
Macros
//-----------------------------------------------------------------------------
#define if (tdmsError = (f), tdmsError (f) tdmsChk< 0)="" goto="" error;="">//==============================================================================
Constants
#define TDMS_FILENAME "TestTdms.tdms".
#define TDMS_FILE_PATH "D:\\temp\\CreateTdmsFile\\TestTdms2.tdms".
#define TDMS_FILE_DESC 'test data PDM 200 Hz format.
#define TDMS_FILE_TIT 'test data PDM 200 Hz format.
#define TDMS_FILE_AUT "no Joen.#define TDMS_ORION_200_HZ_CHANS 44
#define NUM_MAX_POINTS 44
//==============================================================================
Types of//==============================================================================
Public static global variable
public static const char * GroupName = "200 Hz data."
public static const char * GROUP_DESC = "200 Hz Test mock test data collection;//==============================================================================
Static functions//==============================================================================
Global variables
Double startTime, elapsedTime;
TDMSFileHandle hTdmsTestFileHandle;
TDMSChannelGroupHandle hTdmsTestGroupHandle;
TDMSChannelHandle * phChannels;//==============================================================================
Global functionsHIFN main entry point function.
HIPAR argc / the number of command line arguments.
HIPAR argc / this number includes the name of the command-line tool.
Table HIPAR argv/year from command line arguments.
HIPAR argv/element 0 contains the name of the command-line tool.
HIRET returns 0 on success.
int main (int argc, char * argv [])
{
int tdmsError = 0;
int i = 0;
unsigned int usChan;
char szChanName [20];
char szChanDesc [20];
char * values [] = {'one', 'two', ' three', 'four', 'five'};
startTime = Timer();tdmsChk (TDMS_CreateFile (TDMS_FILE_PATH, TDMS_Streaming, TDMS_FILENAME,
TDMS_FILE_DESC, TDMS_FILE_TIT, TDMS_FILE_AUT, & hTdmsTestFileHandle));
tdmsError = TDMS_CreateFile (TDMS_FILE_PATH, TDMS_Streaming, TDMS_FILENAME,
TDMS_FILE_DESC, TDMS_FILE_TIT, TDMS_FILE_AUT, & hTdmsTestFileHandle);
tdmsError = TDMS_AddChannelGroup (hTdmsTestFileHandle, GROUP_NAME, GROUP_DESC, & hTdmsTestGroupHandle);
phChannels = malloc (sizeof (TDMSChannelHandle) * TDMS_ORION_200_HZ_CHANS);for (usChan = 0; usChan)< tdms_orion_200_hz_chans;="">
{
sprintf ("%d colon_", szChanName, usChan);
sprintf (szChanDesc, "Data for string %d", usChan);
tdmsError = TDMS_AddChannel (hTdmsTestGroupHandle, TDMS_Double, szChanName, szChanDesc, 0, & phChannels [usChan]);
tdmsError = TDMS_AppendDataValues (phChannels [usChan], decvalue, 5, 1);}
free (phChannels);
tdmsError = TDMS_CloseFile (hTdmsTestFileHandle);
return 0;
}Hi NiCoder,
I see that you have created a double post. I just want to go forward and the link in this thread
See you soon,.
-
I have this strange message when I try to upgrade my version of pix of pdm
_____________________________________________________
PIX # copy tftp flash: pdm
Address or name of remote host [127.0.0.1]? 192.168.0.2
Source [cdisk] file name? PDM - 301.bin
copy of tftp://Server/pdm-301.bin for flash: pdm
[Yes | No | new]? There
Delete current file of PDM
Writing the new PDM file
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Not a PDM file
Delete partial file of PDM
PDM file that is not installed.
PIX #.
_____________________________________________________
In fact, I installed the image of the pix633.bin system.
Thank you
The only thing I can think is that the file has been downloaded properly in EAC. Try to download it again and check the size of the file and the MD5 checksum of the file to make sure that everything is OK.
It is a free program of MD5 checksum available here:
http://www.download.com/WinMD5Sum/3000-2381_4-10115916.HTML?tag=lst-0-4
-
No free space after deleting files - trouble with optimized storage?
Hi, I have macos Sierra and I deleted many files to my main drive and also to my external hard drive (both to the Mac OS Extended format) in preparation for the boot camp. I also emptied the Recycle Bin, although there is much less space on the two disks that it should be and the majority of the space is obviously indicated under "purgeable". I thought it would not be a problem, because I assumed that the space would be released, if I move all of the files there and if I need for the new Windows partition. However, this assumption was false. I can't simply use storage that I released. I can't move there all the files and I can't create the partition from free space. What can I do with it? It's pretty frustrating... Thanks for the help!
You must use the Bootcamp Assistant to create the Bootcamp partition.
Please provide details on the total space and free space on your internal drive. Post screenshots of what you see in system-> storage information. In addition, select the drive in Finder-I press control and post a screenshot of the window read the information.
-
Why my IOS 10 won't open my free desktop
Why ARE my 10.2 Ops / s suddenly won't open my office free ap?
Ask the developers of the free Office.
also fwiw you can not run iOS 10 on a MacBook Pro so if you fix your signature is easier to propose an action plan when you post a problem.
-
To update to OS Sierra, I need to enter a valid credit card, even if it's free?
I have moved countries and not to use a credit card. To update to OS Sierra, I need to enter a valid credit card, even if it's free?
What is happening with this? I'm more a person worthy enough to upgrade? I upset the bank accounts of the billionaires who benefit from knowing my account information?< re-titled by host >
Create or use your Apple ID without a mode of payment - Apple Support
-
used iWork appears as free less 10.8, now less than 10,10 they did not
Hello
I had been on 10.8 until very recently, and I thought that I was eligible for iWork free upgrade if I upgrade Maverick or later because I had bought iWork 9 and in the box 'bought' in the app store, I see more free marked iWork.
Now I've upgraded to 10.10 and when I go to the app store, they do not appear in the purchased area more and those I find a search for "iwork" are not intended to free practice.
What do you think might happen?
Thank you.
Apple Keynote is free from the Mac App Store, only if you qualify. A previous purchase of iWork 09, or upgrade to a newer version of Mac OS are not qualities in obtaining Keynote version 6 or 7 as a free purchase.
Keynote version 6 and 7 are free to owners of a Mac, if during the first 12 months after the purchase of a new Mac, after this time, they are a paid purchase. Once this initial free purchase of Keynote is done, all new updates are free.
-
How can I remove all but 2015 to 2016 photos from my iPhone (ios10.0.2) for free space, after synchronizing all the photos on my mac (Yosemite 10.10.5) computer?
The fastest way I can think of would be to go to the Albums, go to all the Photos tab, highlight the photo you want to delete and press 'Select' in the upper right corner. Place your finger on the first complete line, you want to remove (if you have pictures that do not have a complete row that you want to remove these institutions, select them individually first), slide your finger on the line so that they are all selected, and then slide up so that it starts automatically at your old photos of scrolling. Once the photos you want to delete are selected, press the trash in the lower right. This will move them to your album "Recently deleted", then they will be always on your phone for 30 days, unless you remove them. If you are sure that you have already backed up these photos and does not accidentally still photos you want, feel free to remove them.
-
Click on free will is not open when I click on options
How can I open click free options. It closes when I click on the tab options. I am trying to reset
You not give us a lot of information to work with...
Check if there is an available update?
-
I would like that the iphone sim 7 for free, but I see is not available but I think I'm goin to buy the samsung
As always, it is better to buy the product that meets YOUR needs.
-
Apple stores in the Canada, they do a free diagnostic as in the USA?
The stores Apple, service engineering, doing a free diagnosis, as they do in the USA?
Are they reliable - can - we be assured the job is really necessary?
As far as I know, all the Apple stores on the planet will be a free diagnostic. They are as reliable as any diagnostic test may be on modern hardware. They do not catch everything, but they tell me will be most of the time. With respect to the work that is actually necessary, based on the results of diagnostics, Yes. It is necessary. Apple employees are not paid a commission or incentive to recommend unnecessary work somehow.
-
How can I activate my free Apple music subscription of 12 months on my other iDevices?
I activated my free Apple music subscription of 12 months on my iPhone 7 but how can I do now on my iPad and Apple TV as well as Sonos. Every time after that I connect with my Apple ID and password I am asked to choose a plan which I will be charged for (eg. Each pmth $11.99). Say, for example, if I go ahead and join a plan will be the Apple system recognize I already have a free subscription and will therefore not charge me until the end of the free period?
Hi jnees1,
Thank you for using communities Support from Apple!
I understand that you started a lawsuit Apple music and I would like to use it on multiple devices. Do you mean the 3 month trial of Apple's music? Please make sure that each device you sign with the same identifier Apple you use on your iPhone. You can find out what Apple ID, you are logged in with by going to settings > iTunes and App Store. To answer your question about the billing after the 3 month trial period, you will be automatically charged at the end of the trial. See this link for more information on Apple's music joins:
Join the Apple music on your iPhone, iPad, iPod touch, Mac or PC
Take care.
Maybe you are looking for
-
Firefox for android crashes whenever I try to open it
I'm pretty new on fire fox, but it was really love on my tablet of note 8 new Galaxy. However it updated during the last two days and since then, so it will not open. I have not yet tried to uninstall and reinstall because I don't know if it's the be
-
Series Tecra S2 and RS232 in MS/DOS
I have the problem that my RS232 does not work 100% in MS/DOS. In Windows XP, the RS232 interface works fine. What can I do? [email protected]
-
Satellite A200-1CR: can I install Vista using my Vista DVD installations?
Hello I would like to get some answers to my questions... I have the satellite A200-1CR (PSAE0) and I want to install vista on my own... not with the recovery DVD but I have some serious questions... (1) may I have problems during the installation...
-
Hi all I have problem to change settings in the bios. Almost all settings are disabled. I can't click on it. I don't know that I am logged on as administrator. Also, it is immposible click the button update of the bios. Any recommendation? Thanks for
-
get the 490 error code when you try to install the update net framework
0000490