PDM with PIX 515 does not work

Similar Questions

• PIX 515 does not recognize the DIMM 128 MB

  PIX 515 does not recognize the DIMM 128 MB. Won't recognize only 32 MB. Also when the upgrade to 7.0, I get an error message that it has not enough flash, but I have 16 MB of flash needed.

  PIX 515 not recognizing 128 MB may be due to, in my opinion, pix-515 supports 64 MB. PIX-515e can support 128 MB. Now error Pix by reading not enough flash I got the same message when I tried to load 7.0 release using the tftp with padding interface configured to the local network with an attached TFTP server segment. I then tried the interruption during the startup control method, once the PIX reached ROMMON > issue 'auto of e1 interface', 'address 10.0.0.1', server 10.0.0.2, there are a few other commands. You may be familiar with them, otherwise use find under cisco.

  HTH

• How can I get the serial number for update for first pro cs4 4.2.1, one provided with the product does not work.

  How can I get the serial number for update for first pro cs4 4.2.1, one provided with the product does not work?

  You don't need a serial nr for updating a program

  You need the original CS4.0. install and add the series nr. to get the program to work.

  Now you can update to 4.2.1

• Games used with Windows XP does not work

  Can I install XP on the same computer with 7?

  Games will not work on windows 7... It was the biggest reason outside the Office that I bought the new computer... now my games does not work...

  These are your options to get a game like work on Windows 7.

  If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, you cannot run Windows XP mode, but you can try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other 3rd party software virtualization and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  Thank you

  Marilyn

• MS Paint "fill with color" tool does not work. :(

  In the painting, my "fill with color" tool (the pouring paint can) does not work. I click on the box, I click on a different color, the icon changes to the can, but when I click on a space as say an empty circle, it doesn't do anything. Right click, nothing, left click, nothing.

  I noticed that the only thing he is able to do is to change a solid color that I did (as a solid black rectangle) in a different color, but only once. If I rectangle black color green, I can't change it to any other color after. I don't know what is happening.

  I am not edit a photo or anything btw, I start a new painting from scratch file. I'm trying just to circles of color and enclosed spaces. I've done this dozens of times with no problems. I tried restarting the computer and paint without effect.

  Thanks for any help!

  In the painting, my "fill with color" tool (the pouring paint can) does not work. I click on the box, I click on a different color, the icon changes to the can, but when I click on a space as say an empty circle, it doesn't do anything. Right click, nothing, left click, nothing.

  I noticed that the only thing he is able to do is to change a solid color that I did (as a solid black rectangle) in a different color, but only once. If I rectangle black color green, I can't change it to any other color after. I don't know what is happening.

  I am not edit a photo or anything btw, I start a new painting from scratch file. I'm trying just to circles of color and enclosed spaces. I've done this dozens of times with no problems. I tried restarting the computer and paint without effect.

  Thanks for any help!

  Hé salés

  try to run the sfc/scannow command. to repair the corrupted system files

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Walter, the time zone traveller

• Problem with BearPaw 2400CU Plus Scanner with Win7 Scanner does not work properly

  BearPaw 2400CU more does not work with Win7

  Yes I did, but it has not solved the problem

• BEFORE the UPDATE of relaxation with time stamp does not work as expected

  We have a scenario where I check update operations on a table.

  I created a before update TRIGGER, so that every time he goes an update on the main table statement, one before the image of the lines is captured in the table of audit with timestamp.

  Since it is before updating, ideally the audit table timestamp (TRG_INS_TMST) should be less main table timestamp (IBMSNAP_LOGMARKER) VALUE, I mean TRIGGER should happen before the update.

  (I could understand in a way that the UPDATE statement is formulated with SYSTIMESTAMP earlier before the TRIGGER is evaluated and so UPDATE is to have a time stamp prior to TRIGGER, but this isn't what we wanted. We want PRIOR update)

  'Table' IBM_SNAPOPERATION IBM_SNAPLOGMARKER            
  ---- ----------------- -------------------------------
  T1   U                 13-OCT-15 03.07.01.775236 AM   <<---------- This is the main table, This should have the latest timestamp
  T2   I                 13-OCT-15 03.07.01.775953 AM
  

  Here is my test case.

  DELETE FROM TEST_TRIGGER_1;
  
  DELETE FROM TEST_TRIGGER_2;
  
  SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1
  UNION
  SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;
  
  INSERT INTO TEST_TRIGGER_1 (ID,ibm_snapoperation, ibm_snaplogmarker)
       VALUES (1, 'I', SYSTIMESTAMP);
  
  COMMIT;
  
  SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1
  UNION
  SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;
  
  UPDATE TEST_TRIGGER_1
     SET IBM_SNAPOPERATION = 'U', ibm_snaplogmarker = SYSTIMESTAMP;
  
  COMMIT;
  
  SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1
  UNION
  SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;
  

  Def trigger:

  CREATE OR REPLACE TRIGGER etl_dbo.TEST_TRIGGER_1_TRG BEFORE UPDATE OF IBM_SNAPOPERATION
  ON TEST_TRIGGER_1 REFERENCING OLD AS OLD NEW AS NEW
  FOR EACH ROW
  WHEN (
  NEW.IBM_SNAPOPERATION= 'U'
        )
  DECLARE
  V_SQLCODE  VARCHAR2(3000);
  --PRAGMA AUTONOMOUS_TRANSACTION;
  BEGIN
  INSERT INTO etl_dbo.TEST_TRIGGER_2
  (ID,
  IBM_SNAPOPERATION,
  IBM_SNAPLOGMARKER,
  TRG_INS_TMST
  )
  VALUES (:OLD.ID,:OLD.IBM_SNAPOPERATION,:OLD.IBM_SNAPLOGMARKER,SYSTIMESTAMP)
  ;
  --COMMIT;
  END;
  /
  

  Output is something like this

  1 row deleted.
  1 row deleted.
  no rows selected.
  1 row created.
  Commit complete.
  
  'T1' IBM_SNAPOPERATION IBM_SNAPLOGMARKER            
  ---- ----------------- -------------------------------
  T1   I                 13-OCT-15 03.07.00.927546 AM 
  1 row selected.
  1 row updated.
  Commit complete.
  
  'T1' IBM_SNAPOPERATION IBM_SNAPLOGMARKER            
  ---- ----------------- -------------------------------
  T1   U                 13-OCT-15 03.07.01.775236 AM   <<---------- This is the main table, This should have the latest timestamp
  T2   I                 13-OCT-15 03.07.01.775953 AM 
  
  2 rows selected.
  

  But for some reason, even after the creation of the 'AFTER' trigger for update, it works as expected. Sense - the main table is not having the last timestamp given

  It's OKAY - I told you in my reply earlier. Reread my answer.

  could understand somehow that the UPDATE statement is made with earlier

  SYSTIMESTAMP until the TRIGGER is assessed and updated so is to have

  time stamp prior to the trigger, but this isn't what we wanted. We want to

  BEFORE the update)

  As I told you before that your UPDATE statement occurs BEFORE the trigger is activated.

  Despite what the other speakers have said, it makes NO DIFFERENCE if you use a BEFORE UPDATE or an AFTER UPDATE trigger. Your UPDATE statement runs ALWAYS BEFORE the trigger.

  HE has TO - it's your update processing statement that causes the trigger to fire.

  Your update statement includes SYSTIMESTAMP. If during the processing of your return to update the value of SYSTIMESTAMP "at this exact time" is captured.

  Then your trigger is activated and starts to run. ANY reference to SYSTIMESTAMP that you use in your trigger cannot be earlier than the value of until the trigger was executed. It's IMPOSSIBLE.

  The trigger can use the SAME value by referencing: NEW and the column name you store the value. Or the trigger can get its own value that your code is doing.

  But the SYSTIMESTAMP value in the trigger will NEVER earlier than the value in your query.

  And none of these values can actually be used to tell when the changes are really ENGAGED since the trigger does not work and CAN NOT, to know when, or if, a validation occurs.

  Reread my first answer - he explains all this.

• Sampling of colors with the eyedropper does not work.

  In Lightroom CC, I create a graduated filter. I want to give it a color, if I click in the gray box, which shows the colorpicker. I understand that you can pitch a color of the picture by clicking the box with the colors, then hold and go to the photo and release the mouse button, LR will choose this color. This does not work with me. If I click on the mouse button and let the color box, the slider in the color box drops to zero saturation and does not move with the colors of my photo I'm going with my pipette. It does not pick up the color.

  Same problem here! Selector is not looking for colors on the image window (it does outside of the Lightroom window!)

  I found that the problem occurs when the preferences are set to use the graphics processor.

  Disable the GPU and the color eyedropper tool returns to work on the image window.

• 'Open with Photoshop Elements' does not work

  My photo does not open in Photoshop Elemtens, when I use "open with" to a JPEG file. The program starts, but no picture opens. What can I do?

  I did as you said, but it does not work.

  But I found the Solution in another forum:

  'open with photoshop elements EDITOR' and not with photoshop elements...

  He now works :-)

• With the clause does not work in SqlPlus for DataBase 11 GR 8 1 material

  I have 11 GR 1 database material, when I connect to my database through SqlPlus (version 8.0.6.0.0) this query

  with x as (select * from areas) select * from x;

  does not work. But when you use SqlPlus provided by 11g, this query works well. This query can run on an older version of SqlPlus?

  user12222356 wrote:
  This client software is installed with Oracle developer 6i form. should I remove all the form developer? Latest version of the form developer is available for 11 GR 1 matter?

  Well, you have problems with the developer of forms?

  I wouldn't recommend delete because you have problems with the SQL more customer that goes with it. I recommend to download the instant client and using them for your needs of sqlplus and leaving the rest products installed on your machine only.

• I got a problem with intel rst does not work, so I uninstalled it but want to reinstall.

  Original title: RST

  My cell phone message says RST service does not work - I does not recognize so I uninstalled Rapid Storage Technology completely and I can't restart.  Startup Repair is on-screen and worked for always.

  Hi Sue1234,

  Follow the steps below for a possible solution:

  Step 1: Start in safe mode and then try to perform the system restore when you uninstalled the RST.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: Try restoring the system to safe mode.

  You can follow the items below:

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  I hope this helps.

• Win2K NAT would be from 1650 to a PIX 515 - does not

  Hello

  :

  I have a working VPN config on my 515 (6.2.2) and can tunnel from one host with a valid external IP without any problem. But, with a NAT would be customer, nothing seems to work.

  I use RADIUS to authenticate after using a password for the group. Here is the sequence of events.

  (1) client machine as a 10.0.0.1 address, NAT had a public address to come into the port of 'outside '.

  (2) the client connects, the user enters GANYMEDE password and is connected.

  (3) the user tries to browse any service and can not.

  (4) if the user switches DNS to an external server, the portion of the split tunnel internet works fine but inside is still broken.

  (5) clients with static IP addresses that are publicly routable connect and can perform all internal and external activities of split tunnel.

  Excerpts from config. I'm doing something wrong?

  Permitted connection ipsec sysopt

  No sysopt route dnat

  Crypto ipsec transform-set esp - esp-md5-hmac noaset

  Crypto dynnoamap dynamic-map 10 transform-set noaset

  noamap 10 card crypto ipsec-isakmp dynamic dynnoamap

  Harpy of authentication card crypto client noamap

  noamap interface card crypto outside

  ISAKMP allows outside

  ISAKMP identity address

  part of pre authentication ISAKMP policy 10

  encryption of ISAKMP policy 10

  ISAKMP policy 10 md5 hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  vpngroup address noapool pool noagroup

  vpngroup dns 66.119.192.1 Server noagroup

  vpngroup noagroup wins server - 66.119.192.4

  vpngroup noagroup by default-field noanet.net

  vpngroup split-tunnel vpn - IP noagroup

  vpngroup idle 3600 noagroup-time

  vpngroup password noagroup *.

  Help and thanks in advance.

  Mike

  You do not have something wrong. The problem is that NAT (NAT actually PAT, port) and IPSec is not working very well, and many features PAT can PAT IPSec traffic to all (PIX included until version 6.3).

  The problem is that PAT depends on using the port number TCP or UDP source as a way to differentiate between sessions, because they are all PAT would be from the same source IP address. However IPSec (ESP at least), tracks right on top of IP, in other words, it is NOT a TCP or UDP protocol, and therefore has no associated port number. It breaks most of the PAT devices.

  The reason for which you can build your tunnel initially, it is that it is all done by ISAKMP, which is a UDP protocol, which can be PAT would be fine. Once the tunnel is built however, all encrypted data are sent by packs of ESP, which as I said, is not a TCP or UDP protocol.

  Trnalsations NAT static work cause they do not rely on the use of the port number, they just change the address of the source that works very well with ESP.

  There is not much you can do about it. If you were closing the VPN into a VPN3000 concentrator, it has a feature called IPSec through NAT, which encapsulates all ESP packets in a UDP packet, which can then be PAT would be properly. The PIX, unfortunately, doesn't have this feature. The only solution is to get a NAT device that manages properly the IPSEc. Surprisingly, some of the less expensive devices on the market handle it, but you should check with each manufacturer to be sure.

• Changing the settings to default print with CUPS still does not work, regardless of the application

  Hello, I looked through a number of positions on the definition of default printer in a Mac, but nothing solve my specific problem. I recently spent a PC to a MacBook Pro, just updated to Mountain Lion and installed my printer wireless, HP Deskjet F4500 Series, with the pilot chosen by my computer. The printer-computer connection usually works, but when I go into the CUPS and change the default settings for Fast Draft, n/b only, it does not apply when I print. I tried several times, making sure to save my default settings in CUPS (and indeed they appear here as Fast project, b & w only), but no matter which application print from - Safari, Chrome, text edit, etc.. - it prints in color and normal mode unless I manually selects the settings for that particular print job. This is especially a problem when printing things that are not pop up a print dialog, such as online coupons. I could easily change the settings of the default printer on my laptop and they apply to coupon print as well, but I'm having no luck with the Mac. Help, please! Thank you!

  Finally I got it solved!

  There are two options in Mountain Lion when you add the printer HP CM1415fn (Apple-> preferences-> Print & Scan system): "AirPrint" and "HP LaserJet CM1410 Series.

  So, with "AirPrint" set default CUPS Options has no effect, even if you change. PPD file.

  Fortunately, with the 'HP LaserJet CM1410 series' setting CUPS the default Options works well!

• My Atheros AR5007 802. 11b / g wireless networking with Windows 7 does not work (works with Vista) and had two HP & Microsoft support tech, they could physically turns on (Soft Touch button) by driver, can you please help?

  He used to work under Vista, not working (not able to turn it on) wireless adapater. But when Win7 starts upward, it turns on and turns off immediately.

  Hello
  First of all, make sure you use the latest version of QLB. If not, install from below:
  Buttons lunch fast HP here (ver. 6.50.7.1)

  One important thing to keep in mind. Before update no matter what driver, make sure that your first uninstalled old version.

  Try installing this driver and check it works:
  
  Atheros Wirelesss driver for Win7 from HP here (ver. 8.0.0.172)

  When this driver does not solve your problem, try an exits:

  Atheros Wireless here (ver. 8.0.0.225)

  If even this will not work so tell me one thing. You have all colorors of stgrange the button mute or wireless.

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• NoSQL Oracle database charger with EE last does not work

  I am unable to run the NoSQL Oracle database loader to load data at: http://www.oracle.com/technetwork/products/nosqldb/documentation/index.html which is included in the documentation with the latest download of Oracle NoSQL. I downloaded the EA on my Unix machine and have the JAVA version:
  race of '1.7.0_17 '.
  
  (I'm under KVlite. I was able to run the Hello Big World Data example).
  
  This is step 6 in the Readme.txt file that I can't run.6. To load the contents of the tweeter to the Bank to run this command:
  $java - cp SAMPLE_HOME/OLH/ONLH/deploy/onlh.jar; SAMPLE_HOME/OLH/ONLH/lib/NoSQL/kvclient-1.2.123.jar oracle.kv.sample.Loader-i SAMPLE_HOME/OLH/ONLH/deploy/airline_tweets_search-03-01-2012-082206.xml m ' < username > US ' - n "username <>" - v "< user name > < userID >" d "|" xml t
  
  I have the tweets.xml of the airline and the jar two files onlh.jar and kvclient - 1.2.123.jar in the deploy directory. When I unzip the package does NOT contain the HLO directory (as shown in above command) if it is a question with above. Also; use the JAVA throw errors in above.
  I ran the following:
  
  [deployment cloudera@localhost] $ java - cp onlh.jar - jar kvclient.jar oracle.kv.sample.Loader-i airline_tweets_search-03-01-2012 - 082206.xml - m ' < username > US ' - n "username <>" - v "< user name > < userID >" d "|" xml t
  
  My output:
  
  11gR2.2.0.39
  
  (I don't get a validation error message invalid as described in examples of java files. I tried many variations that precedes. In addition, the sample in the README.txt step 6 also does not align with the documentation available in the java file < tagname1 > < tagname2 > use. I am able to run step 5 to see the use of arguments.
  
  I'm out of options on how to solve this problem and would appreciate some advice asap for a demo that I build. I certainly need to have this job so I can load my own cvs (with a few tweaks to the arguments). I'm beginner JAVA Programmer so explanations with examples are greatly useful.
  Thank you

  >

  [deployment cloudera@localhost] $ java - cp onlh.jar - jar kvclient.jar oracle.kv.sample.Loader-i airline_tweets_search-03-01-2012 - 082206.xml - m "US "-n ""-v " " d "|" xml t

  The file README says to the kvclient and the onlh.jar - cp, not onlh.jar in cp and the kvclient as the - pot arg. If you move the kvclient.jar to the - CP

  only.jar:.../kvclient.jar - cp

  It will work.

  Charles