PE 2900 PERC 6 / i PD failed / Normal

Similar Questions

• PowerEdge 2900 Perc 6 / i internal Raid Controller

  OK, so I use a server Dell PowerEdge 2900 with a PERC 6 / i integrated RAID controller

  I have configured the RAID array very well, installed Windows 2008 R2 and works fine and dandy

  The only problem I encounter is that, when starting the server (Post), I get a message on the cable SAS B are not connected or misconfigured.  The bottom of the basket on my server, which goes to the internal drives, has only a port where I can plug a cable between the Perc 6 / i.  Where is the 2nd wire supposed to go?  I can't find the second port.

  Thank you

  Hello

  joeyjojo56

  I get a message on the cable SAS B are not connected or misconfigured.  The bottom of the basket on my server, which goes to the internal drives, has only a port where I can plug a cable between the Perc 6 / i.  Where is the 2nd wire supposed to go?  I can't find the second port.

  PERC connector 0 goes to the bottom of basket. Connector on the PERC 1 connects to the modular Bay. If you don't have the module Bay optional then you ensure that you use the 0 on the PERC and not the connector 1.

  Thank you

• PowerEdge 2950 Perc 6 / i battery failed

  Hello

  We have a Dell PowerEdge 2950 that signals a failure of the PERC 6 / i battery. Where can I buy a spare battery? This server is no longer under warranty.

  Thank you

  Shang-Lin

  U8735 part number.  You might be able to buy them through Dell, but you can get them from many suppliers:

  http://www.Amazon.com/Dell-U8735-NU209-battery-PowerEdge/DP/B0045ZNJJU

  http://store.flagshiptech.com/Dell-u8735-nu209-P9110-PERC-5-i-6-i-H700-RAID-controller-battery/

  http://www.impactcomputers.com/u8735.html

• RAID5 Perc S100 to T110 failed after power failure

  I have 4x2TB disks in a Raid 5.  The screenshot below shows the failure even if all 4 discs seem to be online.  I was able to run the system utility to run a short as self-test on the 4 discs and all this happened.  They also passed the SMART test.

  I don't know why there is a virtual drive non-RAID since I have none of the extra drives.  And, when selected, there is no physical drive assigned.

  Nobody knows what could happen and how to recover from this?  My system does not start at this time.  It should be started with a Windows Home Server 2011 (equivalent to Windows 2008R2) and there should be 2 partitions.  A small 60 GB boot volume and a volume 5.4 TB share.

  Thanks for any help on this.  I need recover the photos of the share volume and that you may need to send to a data recovery service, if I can't fix it myself.

  Note: I tried to start after removing the disconnection of each disk individually he did nothing except to display the drive disconnected missing in the physical drive list.

  Here is a link to see the screenshot in the BIOS for RAID:

  http://sdrv.Ms/15DU6UL

  UPDATED screenshots of physical disks:

  Physical disk 0: http://sdrv.ms/18DJU02

  Physical disk 1: http://sdrv.ms/18DJZB1

  Physical disk 2: http://sdrv.ms/18DK5sp

  Physical disk 3: http://sdrv.ms/17uToJR

  jywan68

  A last thought would be...  Would it be useful to install Windows in a 5th player and try to run manage open or other RAID Utility?

  Yes, it might help. Since it is a controller function driver there is limited inside the BIOS of the controller functionality. OMSA would provide probably more information within an operating system. You must use a USB or other external media since the S100 takes only supported 4 drives.

  Thank you

• POWEREDGE 2900 RAID 10 HAS NOT DEGRADED

  Hello

  I have a Setup raid 10 on a server PowerEdge 2900, Perc 6 / i. There are 4 250 GB drives, set up as a Raid 10. A drive has failed. I tried the disk with a hot swap size even more recent. The server crashed and restarted, Post message showed during initialization F/W and writing degraded disk virtual, but restarting Ok. When I OpenManage it shows degraded and only shows 3 locations of the physical drive page. New drive is orange flashing on the right indicator light.

  Can someone help me with the permutation of the reader?

  Thank you!

  Madmin46

  Is that possible given that the new drive is not a certified dell disk that would cause problems?

  Yes, and that's the most likely cause. Some versions of the AR4 are posted on several PERC controllers. Many times non-certified readers will work fine, but when certified and non-certified are run together, there are often questions... thinking that it is a American, South African and a Pilipino all English - speaking it may be difficult for the three to communicate because they all talk about the different versions of the same language, and language gap can cause problems on a controller which the tolerance of error and delay (patience) are thin.

• HP 2000-425NR hard drive short DST: FAILURE

  book is 12 days and suddenly went to hang at the windows logo. various attempts don't (tool startup repair, System Restore, recovery center) did not help.

  has been able to get to the CMD directory and copied some critical files on a flash drive and ran the full recovery of the system from the backup partition. provided that the factory successfully restored and it recharges without problem.

  has run the system test once again, the same disk failure.

  I know that you have no crystal ball, but I had a HARD drive broke from the start? any chance that the HARD drive will do that to me one more time?

  It is under warranty, so I can get it changed or all exchanged (but I'm in one of those crazy people "leaving the country" scenarios, no, really, we're leaving for Peru in 3 days.)

  "There is no such thing as a foolproof system. Someone will make a fool better tomorrow. »

  Hello:

  The short DST failed normally means that the drive HARD must be replaced.

  You will need to file a claim to HP warranty service, when you get back from the Peru (if you're not going to be gone too long).

  Paul

• Cannot go beyond the Office in standard mode, various scenarios of (non-performance issues) freezing. Safe MODE works very well.

  Cannot go beyond the office longer. Freezes clicking on dialog boxes does nothing most of the time. Clicking on some dialog boxes will close them but leave the box empty and completely white out. The icon on the taskbar is different than what is on the desktop. Everything works fine in safe mode. I have worked on this for almost 3 weeks and have been asking for help. One of my diagnostic checks give several (IRQ) has not been defined in time. (OFOO:0132 or OFOO:XXXX)

  Running Vista 32-bit Basic. Did a restore of the system (not a full reboot) and he made sure the cursor to move to the desktop (but no result has produced most of the time) Unlike before where the cursor was just immediately frozen.  Also received DST short Test failed and OFOO:065 D. error reading disk-DST self-test. Do not forget that in Safe Mode, I can do everything very well. It's the only way I can access the internet. If anyone can help me I'll always owe to your kindness.

  Hello

  OFOO:065 D. errors of disk-DST Self Test Read Error DST short Test failed normally mean hard.

  See you soon.

• PowerEdge R210 II Xeon, spenge if all ' all'improvviso, oppure if no starts propio.

  Buongiorno he mio Server che ha lavorato poco più di 2 anni, e TR e spento all'improvviso, tried di riavviarsi causa, fino a poi che my some ora di nuovo spenge TR dopo riparte.

  Ho called assistenza a pagamento con he Técnico abbiamo eseguito it test diagnosis che ha server it Dell in fornecidos. Eseguito it test abbiamo visto che dava error code 2900-0221 Cmos battery has failed. He tecnico Dell mi ha consigliato di auswechseln the batteria a bottone, ed e quello che ho fatto, my senza risultato. Cosaltro can I do? It Server e nuovo aditittura great ho tried auswechseln Reed alimentatore, airfare from my niente da.

  Salve,

  The sto contattando by mail

  Saluti,

• disk not certified: what are the options

  I just installed a spare drive in my 2900 PERC 5 / i I thought me certified, but is not. It needs to be a hot spare for a RAID 5 configuration. What are my options? It shows as 'foreign' is the physical drives. The only available tasks are blink and unblink.

  Thanks for any advice.

  PS Maybe I should go ahead and order a CERTIFIED disk...

  WD blue is a desktop drive and not would not have been configured on the server of Dell.

  If it's showing foreign and you do not have the option to turn it off, then the drive is bad or the drive is not compatible.  If your other are indeed blue (same firmware), then it's probably a bad drive.  You won't be able to do something with her in a foreign State.

  Maybe you have already disabled the foreign configuration.  It is displayed when you try to configure a new VD?  Is it always show on the screen of physical disks after doing a refresh on this page?

• How to fix the battery failed in PERC 5 / I in a PowerEdge 2900

  I have a server PowerEdge 2900 running Windows Server 2008 R2.  In OPenManage server administrator (OSA) it shows that the battery on the PERC 5 / I is in a State of 'Impossible '.  What can I do to fix this problem/error?  I find that the only available operations of OSA is "start the learning Cycle.  Will running that can help?  Thanks for any help.

  Well, I ran the Cycle 'learn' and when it finished (took a few hours), the State is about to "Ready". In this case the question was solved/deleted by this operation. Thank you all for your contributions here. Please close case.

• Writing PNG file failed when build exe, but operate normally on the development platform

  See photo below, it is used to call WinAPI for screenshot and then save it in PNG file. This Vi operate normally on the flatform of development, but it failed when building the application .exe file. The pop-up dialog error 'chain of illegal path, OS', but it is clear that the path is correct. Note: run the same PC with Win XP.

  

  Update:

  I found the reason, but not a solution. In fact, the Clipboard.Get Image does not work when building application exe. But it's the private node invoke, impossible to get support of NOR.

  It seems to be to the node to invoke public on the version of LabVIEW 2012, which can help you check on LV2012 version? Thank you very much.

• Vista could not start in normal mode and the relocation of scores of hidden factory settings also failed.

  NOTE: THE PROBLEM WAS MY POWER SUPPLY WAS LOW, NEW POWER ADAPT SOLVED MY PROBLEM.   Read more if you are interested in what happened prior to my tent a different power adapter.

  Original title: vista 32 does not start

  After a reboot could enter the mode safe mode with internet connection.  able to restore good boot known beforehand.  But what normal start attempt would not start completely.  tried to reinstall from hidden factory partition.  07:34 minutes, the installation progessed.  then the machine stop.  When you restart get the message "error during installation, restart the computer, and then restart the installation."  When you try to start in safe mode, get error ' cannot install frrom SafeMode ".". "  I have no bootable cd.  to know about a 'platform of recovery' still tells CD also cannot install from this cd.   can I boot from a "devils of recovery" in safe mode and use the hidden partition to reinstall to factory settings as I tried the first time?  or do I need a full installation CD to get the machine to boot?   My question is should I at this stage of start-up during installation seems to have failed?

  as for what caused this problem?  I recently gave a USB external hard drive, but had not written for her.  did a chkdsk of the external hard disk without error.   When the problem was first happening, I removed the battery and the power cord of the acer laptop then pressed the power for 30 seconds to perform all memory the power button.  He got rid of a problem that I had been meet in which received start-up error message not "adapter acer". with battery removed, laptop power problems have disappeared.

  as the system is now, when I try to start everything now alt F10, I get a screen that reads "change windows startup options for: microsoft windows vista ' ' path: \windows\system32\winload.exe" "partition: 2" "HDD;". " d404533e' "[/ noexecute = optin /deteecthal]"

  When I press ESC the next screen "windows boot manager" bed "choose an operating system to stat, or press TAB to select a tool:

  Microsoft windows Vista (single choice)

  "to specify an option fo this choice, press F8."

  "Tools:

  "windows memory diagnostic"

  (diagnosis of memory showed no problem) by pressing TAB toggles between Vista and the diagnosis.

  I tried to boot with external USB hard drive connected and not connected.   the touch pointer was not working, but was erratic.   Sometimes, I could use a USB wireless mouse when it is started in safe mode.   recently the media player would not charge unless I restarted.  (before the system does not at all which is the theme of this original problem).

  When I try to start using f10, I get a screen that seems to ask for entry. the cursor is held after the detecthal of the line as below. What could of entry to enter the boot to continue?

  Winload.exe

  / noexecute = optin /detecthal

  me. surprised... the problem was that my power supply was low.   the adapter provided enough power for the laptop, most of the time.  but sometimes for laptop needs more power that the adapter could supply... so the laptop would be closed.   When I tried a different power adapter in a store, the fully charged laptop and my problem was solved.  lost a lot of time because I didn't know that the power supply was the problem!

• Profile of user failed. What should I do now? I tried to start in safe mode and it worked, but when I'm back in normal mode it still does not work.

  Help! I got a message when I tried to signon to windows saying that my user profile does not logon. I can't in my files and programs. I need to get to as soon as POSSIBLE. Help, please.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• PERC H700 RAID 5, 3 disks, 1 Reporting failed and 1 predictive failure

  Hello:

  I have a PowerEdge T410 with a PERC H700, RAID 5 with 3 disks.  The controller reported a failed drive so I replaced the week last with a drive of new/refurbished.  Now only 1 week later it reported another drive has failed and the drive replaced as predictive failure.  Looks suspicious, i.e. I am doubting the controller card.

  I think updating the firmware of the controller first, but not sure if I should replace the faulty drive first, i.e. If updating the firmware could cause table failure.

  Also, if I install OpenManage on a virtual machine (host is ESXi 4.1), OM sees the controller?

  Thank you!

  Start on our live image and export logs of the OMSA facility there. http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=CWF92&FILEID=3550743303&osCode=WS8R2&ProductCode=PowerEdge-T410&LanguageCode=en&CategoryID=di

• Windows fails to load. That it recharges on normal startup. Hangs on a black screen with a cursor in repair mode.

  I was in my class and hit the computer on the desk. I turned it and then turn it on again now, this problem occurs. It's a Toshiba, and Toshiba normal screen comes up and takes me to the screen "windows failed to load. When I choose to start windows normally, it hangs on the Green loading bar before you restart thereafter. I have it on the repair of the system right now, but he is suspended on a black screen with a cursor and nothing else.

  Hello

  Since then, he has been the "Crash test" the help of a computer store real (not the leeks and glances at a BestBuy
  or other BigBox stores) or the system manufacturer support is probably needed. The underlying problem is probably
  material and it is doubtful that all the efforts of software will work even if it is remotely possible.

  The problem may come from the damage or corruption of the hard drive for the next message will be directly related to
  This question.

  --------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.