PE R510 of the SAS addition to the installed system with SATA drives

Similar Questions

• NB200 - 10 p - cannot install the Inter - problem with SATA driver Storage Manager

  Hello :)

  I installed XP Pro SP3 disk a HARD clean on my NB200 - 10 p.
  To get to the installation CD, I had to modify the "controller" SATA "from"AHCI"to"Compatibility"mode
  XP has no sata drivers embedded.

  Instalation of OS went well, and I installed all the drivers from Toshiba one by one, but Inter storage household.
  that contains the SATA drivers won't install!
  Installation the installation starts, but ends up with an error saying "this computer does not meet the minimum requirements for installing the software"!?

  Any ideas?

  TNX

  See you soon!

  Hello

  I m wondering why you need to install the SATA drivers if you have already installed Win XP on this NB200?

  > To make installation CD, I had to modify the "controller" SATA "from"AHCI"to"Compatibility"mode
  If you have changed the SATA compatibility mode then the SATA drivers are not necessary because the HARD disk controller does not run in SATA mode!

• How to save important files a files on a dvd before doing a restore of the entire system with factory.so disk I am able to reinstall computer after system restore.

  I need to do a restore of the entire system with disc received from factory.but that I have personal files and folders that I need keep.such as banking, contacts, photos, ect. ect. How do I put them on a dvd a restore then their return after the full system restore

  Hello

  If the system still boot and CD/DVD Burns just put in a DVD-R (write once) or DVD - RW (burn
  several times)-it will encourage - when its ready use Windows Explorer to drag and drop files (and
  their content) on the DVD. When you're ready, click BURN. I would like to make a couple of each DVD for
  Security with redundancy. These will not be encrypted and you can access the files out of them or
  subsequently copy on a hard drive.

  Basically, make sure you know what you want to copy the files and put them in a blank DVD to write.

  ---------------------

  If the system does not start, then you will need to put the drive in another computer or in a
  External enclosure USB so you can copy files to removable media.

  ---------------------

  Burn a CD or DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspx

  How to burn a CD with Vista
  http://ITsVISTA.com/2006/12/ITsVISTA-Tip-10-how-to-burn-a-CD-with-Vista/

  Burn a CD or DVD in Windows Vista
  http://maximumpcguides.com/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Vista/

  Microsoft video - how to burn CD/DVD
  http://www.YouTube.com/watch?v=0BwF60m05m8

  Excellent Forum for help with programs and CD/DVD problems
  http://Club.cdfreaks.com/

  Burn a CD or DVD in Windows Media Player
  http://windowshelp.Microsoft.com/Windows/en-us/help/30ffa641-B682-4315-8c7e-8a29f383a7131033.mspx
  Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/51a88740-Abda-4144-9176-cec79cca31e81033.mspx

  Burn a CD or DVD in Windows Media Center
  http://windowshelp.Microsoft.com/Windows/en-us/help/9ee6cb78-bd7e-4DE3-A154-82d40c4289e01033.mspx

  Burn a CD or DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspx
  How to burn an Audio CD - see also related Articles
  http://www.vista4beginners.com/how-to-burn-an-audio-CD
  Burn a CD or DVD using Windows Vista - a video
  http://www.YouTube.com/watch?v=0BwF60m05m8

  Disc burning: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/2fa35b0d-B280-4589-9805-55e753888f5c1033.mspx

  Should which CD or DVD format I use?
  http://windowshelp.Microsoft.com/Windows/en-us/help/2af64e60-60AA-4d79-AB6C-3a5db5806cbe1033.mspx

  Windows Media Player playlist: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/4bf0d986-a1cb-40d2-94de-85dba30a83831033.mspx

  Get the most out of WMP11http://windowshelp.microsoft.com/Windows/en-US/mediaplayer11/default.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Parameters of the obsolete system with the specified values:

  Hello
  
  I'm in the alerts log below:
  
  Parameters of the obsolete system with the specified values:
  REMOTE_OS_AUTHENT
  
  It IS this setting is suppotable in 11G and also how can I remove it from SP. with bounce of the instance.
  
  Thank you...

  (1) it is frowned upon in 11 g such as er your alert log message. http://docs.Oracle.com/CD/B28359_01/server.111/b28320/initparams199.htm

  (2) define it in your spfile false who will return to the default value. This cannot be changed dynamically and you will need to restart your instance.

  alter system set remote_os_authent=false scope=spfile;
  

• Cannot install VMware ESXi 4.1 "cannot find the image of the installed system.

  Started in iso ESXi 4.1 downloaded, burned on a CD, CD, go to the screens, press F11 to install.  Immediately get the following error:

  -

  ---

  The installation operation failed!

  The installation operation encountered a fatal error:

  Cannot find the image of the installed system.  This is due to the image being not mounted correctly or the CD-ROM not supported.

  -

  ---

  The material is a system of handcrafted with Intel DQ35JO Council, latest version of the BIOS, Intel E6850 CPU, 8 GB of RAM, 2 SATA drives.  I know this isn't on the list compatible but is a 'white box '.  I installed ESXi 3.5 on it in the past and got it working, and I saw other success stories with this Board/CPU.  Yes, I have activated the virtualization mode in the BIOS and powered down/up.

  Here is what I tried:

  -Redownload VMware-VMvisor-Installer - 4.1.0 - 260247.x86_64.iso to ensure that it was not corrupt (2 copies, against perfectly)

  --Also tried another drive (IDE) CDROM

  -Created a bootable USB using uNetBootin 4.7.1 and booted from it

  -Switched SATA setting in the BIOS from AHCI to IDE

  I get the same exact error.  I searched here and everywhere and don't find any reference to this error.

  Help - all do you offer for my next step?

  Have you had a previous vSphere installed on your system?

  I had the same error on my 'white box' (in fact, it is black).  I used to run esxi 4.0 (u2) on my Acer X 3300 (6 GB, Quad Core AMD Athlon II).  Controllor internal SATA is not supported, but it allows me to use the box for normal windows task and ESXi is sitting on a SDHC 4 GB flash card.

  When I started my freshly burned ESX4.1 cdrom, I got the same error.   I thought that the fact that maybe there was an existing install on my destination drive (the flash memory card), and that the CD could not perform an upgrade.

  So, I tried the upgrade path (first trying to utility of the host and the .xml error message).  After reading the manual, I did the upgrade from 4.0 to 4.1 using the device of vMA and I must say that esxi 4.1 works great on my white box.

  Then I suggest that you try upgrading and see how far that gets you.

  Good luck (and a beautiful weekend)

  Marino

• should I have got windows xp with my operating system disk, I bought the xp system with code authenticticatioin

  I bought a dual pentium with acer moniter windows home edition OS prossesor .should I got the new cd with my package?

  Maybe and maybe not.  You should have been provided with some means to reinstall Windows on your machine should something bad happen.

  If you have purchased an OEM machine (such as HP, Dell, E-machines brand name, etc.), in the old days, the manufacturer will provide a DVD to reinstall Windows.  More recently, they save the expense of the DVD and provide a recovery Partition on the hard drive that can be activated by pressing a key or combination of keys to the start screen very first from the switching on of the machine.  In addition, they generally provide a way for you to burn your own DVDs (only once) for use as a backup hard drive to go belly.  In any case, if you have an OEM machine, you should go to the manufacturer's Web site and download the manual for your computer.  Everything should be revealed it has appliqu' to your machine.

  If you bought a PC to measure with a copy retail XP, then I would expect that you should have been provided with a DVD or instructions on how to make your own backup OS installation to reinstall Windows.

  HTH,
  JW

• How can I reinstall the operating system with the recurring kernel panics?

  MacBook 1.1, white, plastic, 2.0/2x1GB/80GB/SD/USB.

  It used a lot, but want to keep going for special purposes.  Get kernel panic/black screen when I try to reinstall the operating system on a blank disc;  deleted before trying to reinstall Lion 10.7.3.  Tried other earlier versions of operating system.  Reinstall the memory chips and ordered new ones as a bet.  Made a "Lion" partition the Middle clone backup FW for my MacBook Pro, but there now El Capitan; window said I have bad installer in MB Pro; Cannot install on this new FW partition, but I don't know if this will help anyway.  Must be HW problem; nothing on the MacBook drive.   Diagnosis I could not complete either.  Impossible to wipe FW with the MB Pro, Lion and other stuff loading to attack the problem of HW?   Don't know how to do in this regard.  A new Disk Warrior 5 and old Tech Tool Pro.  Apple HW Test on the original disc from MacBook will not appear either?   Difficult OB!    Challenge yourself, please!   New mem circuits can do. ??

  So I'll try to attack it from the external hard drive, of course, I have to.   But how to find and eliminate the block HW?   Finally, go ask Apple support.

  It doesn't let me finish any operation!

  According to Mactracker, a Macbook 1.1 is limited to Snow Leopard 10.6, as the new OSX compatible.  Do you mean you had lion (10.7) installed?

  Ciao.

• Satellite A100: How to reinstall the operating system with recovery CD?

  Hi guys,.

  My laptop (8 months) has been crashing (Windows XP) lately and I tried to use the product recovery CD but nothing happened (the laptop failed to boot from the CD, instead, she starts toward the window of connection for Windows XP Home edition). When I open the CD in windows Explorer, then I realized it was empty. Is it supposed to be empty?

  Even if the laptop came with a second CD, "Express Media Player Recovery CD", I think that's going to be for recovering pre-installed software supplied with the system.

  I guess I can contact Toshiba for another free product recovery CD (or are they supposed to be two?) my system is still under warranty.

  Please I need confirmation on this asap.

  Post edited by: [email protected]_UK

  Hello

  It's very strange, I can't believe that the Toshiba Recovery CD is empty!
  There must certainly be a ghost image.
  Very, very strange and mysterious

  The Express Media Player recovery CD retrieves only the Media Express Player but not the entire operating system!
  I also recommend to ask the ASP in your country for a replacement CD recovery.
  Perhaps you could send guys the empty recovery CD because they do not believe! ;)

• Cannot find the XP drivers for Sata Drive

  I can't find the XP 32-bit drivers for my sata 750 GB sata HD model WD7500BPVT, I watched all the other Messages in this forum, but I can't find a thing.  I looked hard into the laptop Sata Drive and next to him it's a model Sata 750 GB WD7500BPVT he says also to replace this drive with a 634250-001, and there is a barcode below what has the nubers DC12CD so this is useful because I thought that it also my being the model player.

  Hello:

  The sata drivers, you need to depend on of which laptop model you have (processor and chipset), not which hard drive model you have.

• How to install xp sp3 with sata driver in my P8Z68-V THE?

  Hi my problem is that I want to install windows xp service Pack 3 in my new computer

  my new computer is compatible Windows7 how to install Windows XP on my new computer?
  It's my form of systems
  Motherboard: ASUS P8Z68-V (compatible with windows7)
  PROCESSOR: Intel Core i7-2600 CPU @3. 40 GHz (compatible with windows7)
  MEMORY: 8 GB
  GRAPHICS CARD: MSI AMD Radeon r6770 (compatible with windows7)
  is it posible to install windows xp sp3 on my profile?
  can u show me the steps by steps in the creation of the xp3 with sata controller
  and how to reformat and bios configuration or steps, follow the steps
  from the beginning to the end

  Hello

  You can follow this link & check if the problem persists:

  How to install or upgrade to Windows XP?

  You can also ask your question in the TechNet forum for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.

• Targeting different versions of the operating system with the same code

  Hello again,

  I'm looking to use some features of the OS 5.0 such as the transitional API.  Is there sort of having a base code that will compile in different versions of the JDE, but exclude the code blocks if the OS does not meet the requirements?

  For example, transitions on a device to OS 5.0 but not appear on device OS 4.5.

  Ideally, I'm looking for a solution that would integrate directly with Eclipse and debug without any extra steps in the two versions of the operating system.

  Try to do research on the "preprocessor directives", you can use this to do what you need.

  Basically, you wrap the code OS 5.0 in the guidelines such as:

  #ifdef VER_5
  System.out.println ("This compile for 5.0");
  #else
  System.out.println ("This compiles for no 5.0");
  #endif

  Then, enable you or disable directives in the compiler generate COD versions for each platform.

  Jason

  www.lcamobile.com

• Install Windows 7 on the same computer with different drives

  I plan on building my first computer soon and I want to run Windows 7 Home Premium.  If I install this version of Windows 7 and that I update the processor or hard drive later, I'll be able to install it again? http://www.Amazon.com/Windows-premium-64bit-System-Builder/DP/B004Q0PT3I/ref=sr_1_1?ie=UTF8&QID=1348592929&SR=8-1&keywords=Windows+7+Home+Premium

  One of the comments said that Windows 7 is is only related to the motherboard, if I want to get a couple more opinions.  Thank you!

  Upgrading the hard drive won't be a problem. Simply create a backup of the Image the old drive and restore to the new drive.

  How to pass windows 7 to a new hard drive using Acronis True Image Home 2011:
  A step by step guide on the use of Acronis True Image Home 2011.
  http://www.PAGESTART.com/acronisnewharddrive01.html

  How to pass windows 7 hard disk nine or greater using the backup and restore of Windows 7
  http://www.PAGESTART.com/win7bckuprstrnhd072610.html

  How to pass Windows 7 on a larger hard drive
  http://notebooks.com/2011/02/16/how-to-move-Windows-7-to-a-larger-hard-disk/

  Restore your computer from a system image backup
  http://Windows.Microsoft.com/en-us/Windows7/restore-your-computer-from-a-system-image-backup

  ==============================================

  Change the CPU may require a different motherboard, so if you change just the CPU using the same motherboard, you may need to reactivate over the telephone.

  However a "of System Builder (OEM) version of Windows 7 is related to the first motherboard install you it, so if this CPU upgrade also requires a different motherboard / new then the Integrator version will be more usable (will activate not)."

  ==============================================

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) clearly explain your problem to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone
  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Installation of the Adobe software with two drives.

  Hey guys,.

  I am quite new to all the creative aspect of Adobe and all cloud recently decided to buy Illustrator CC. My computer is running two separate hard drives, SSD (120 GB) which runs as C: drive that works my OS. And a (2 TB) HARD disk, which stores all the data of my loose to save space on the D: drive. As I said, I bought Illustrator and downloaded on my computer with no problems and it is automatically installed on my D: drive. I tried to run but a mistake came say Adobe Application Manager was either missing or damaged, so I tried a reinstall and placed him on the D: drive. It worked, but when I launched the app, it came up saying "update... "and the completed tab shut and disappear and nothing else would be open. I tried opening HERE and the same error came. I realized, then, that the application of CC (which is installed with Amnesty International) was located on the C: drive somehow and I am unable to move due to a file that runs in the folder. It appears in the taskbar, but the icon is grayed out and when I click on the application with a gray icon spinning there constantly and it attempts to open several times that turns into a chore using my other programs. I have exhausted my own efforts to understand what the problem is and because of the amount of money I spent on this software, I would be very grateful as soon I can really use it.

  Thank you!

  So, after a few hours with online help, we managed to understand that my directories have messed up in the registry. After changing the locations to the C: drive we reinstalled creative cloud and it worked perfectly.

  + 1 for technical support.

• ESXi on the host system with a physical restriction of the MAC

  Hi all!

  We have installed on a host system, located in the data center with restriction of MAC on a physical map of ESXi.

  Earlier, we have VMWare Server 2 with bridged network, it was not a problem.

  All virtual servers is accessible via port forwarding.

  About ESXi I can't found any solution to create the bridged network.

  Please give me a tip on how to solve this problem.

  Create a vswitch with no physical cards.  To connect VM to that (and a management vmkernel ESXi).

  Next, install a virtual firewall as vyatta connected to the vswitch isolated and the default vswitch with the physical card.  Then configure port forwarding rules as required.

• The message at startup: SATA drive secondary 0 not found.

  I have a computer Dell XPS Generation 2 with two SATA drives not configured in RAID.  Initializing the BIOS, I get the message: SATA drive secondary 0 not found.  Press F1 to continue or F2 to enter Setup.  If I enter the configuration, I find:

  Primary SATA drive

  Model ST3120026AS

  120 GB

  SATA secondary drive

  Unknown device

  If I press F1 it will load Windows XP.  How can I access my secondary SATA disk?  My BIOS is V A06.