PE R630, new battery detected.

the server has sent the following message is displayed.

Severity: Information, category: storage, MessageID: CTL1, Message: event log: event log: 1 new battery detected integrated RAID controller

We didn't change any material, it suggests damaged battery?

Thank you.

Hello

Shalom.a
We didn't change any material, it suggests damaged battery?

No, I suspect not any issue based on this information message. If the message appears frequently then I would say check log controller for battery charge values.

Thank you

Tags: Dell Servers

Similar Questions

  • Portege M800 new battery - "no battery is detected.

    Hello!

    I bought new Toshiba battery original for my M800-107, since man alone has lost half of its capacity. The problem is when I plugged this new battery in Win7 says "No charge, battery connected" and after that "no battery is detected. When I unplug AC, laptop works, but when I plug it again, still no load (no existence of the battery). The Red of the battery charge indicator flashes, when the AC is unplugged, lights when AC is connected. I have tried everything what I found on the internet for this problem, but nothing worked :-(

    I also tried Ubuntu to see if Win is the problem, but the same problem occurred.

    I have BIOS v. 5.00.

    Do you know any solution? Maybe - new BIOS if there was any news?

    Thanks in advance.

    Did you buy original battery Toshiba Toshiba logo on the label of the battery?
    What happens when you start the laptop with power supply only, without battery and insert the battery when the operating system is fully loaded?

  • New battery is not detected on Equium A300D - 16 c

    Hello

    This is my first post on the site. I have a problem with a new battery on my Equium A300D - 16 c. (no battery detected)
    The original I got the computer died after two years of use, so I had to order a new one to replace. I received and he himself works very well, giving me a charge of 90 minutes. But the problem is that it isn't detected by the computer when I click on the power icon on the bottom bar of the screen, so I know how much time I have left with him. In addition, the orange light which indicates that the charge should go white whether full cost, mine just started orange flashing after awhile (what is when it is fully charged?).
    I got power to my computer a few minutes ago and he cut and I had to turn it back on, despite the battery in and it is complete free (as it has been in all day and the sector is since in periods of decent length).

    What can I do to fix this?
    Note that I'm not too good with computers, so anything can be better explain really, really just that I'm not the most skilled when it comes in this region.

    Thank you

    Purchased product Toshiba original after the part number, placed on the battery?

  • New battery is not detected on Satellite A300

    Hello everyone

    I had this problem with my laptop Satellite A300 (PSAJ4E). I bought a new battery and my laptop. I have Windows Vista.
    The battery is not detected. When I remove the charger its work good but with indicator low battery so I m updating my BIOS but the problem is still there.

    I look around and tried to disable Microsoft in Device Manager.
    Still not fixed properly. I took the charger and then reinsert.
    It shows the power supply AC but free of charge.

    Did you buy original battery Toshiba with Toshiba written on the label of the battery?

  • Satellite A - new battery not detected

    Changed battery from PA3534U-1BRS 4000mAh to PA3534U-1BRS 4400mAh. What new battery installed message "no battery detected.
    I tried to turn off the machine etc. and remove, then reinstall the new battery, but it makes no difference.

    Any advice?

    Hey,.

    Specifications of batteries are different, as you can see

    What laptop you have exactly?

  • Satellite A300d - new battery not detected

    I recently had a new battery PA3533U-1B SR / regarding my age Satellite a 300 d.
    When I put the new battery in the laptop, unplugged computer, press the power button, the Red battery light blinks several times, no power.

    When I plug the power to the laptop, the red light on the battery remains red as-if the load, once windows has loaded the battery shows as not detected.

    I have checked the connection and passed through Device Manager-uninstall/install, but came with no luck. It is the 3rd replacement battery, I had this company who have a very positive opinion. Is it my laptop or battery?

    I have a good battery minutes 20 faithful who recognizes all time and expenses without problem.
    If you could please help it would actually prevent me from going crazy, thanks in advance :)

    Hello

    I recommend you to keep the charge of the battery for a longer period if the time
    The battery is working correctly? I mean the laptop can charge the battery and no flashing red led is visible. Right? Well, it means that this laptop is OK!

    In such cases, it s battery related question keep the battery in a few hours or maybe day this helps if not, then I recommend you to get in touch with the retailer and ask another battery

  • Satellite P300-h-13 - new battery is not detected

    Hello, my battery was dead, so I bought another battery and first of all, it did not work so I asked for another, they sent me another one of a, but this works too...
    When I restart my laptop, firstly it is said, not plugged in, not charging after a 2 minute he says no battery detected

    can someone help me please

    SATELLITE P300-H-13

    Tried to download bios and thing of power button 30sc that still nothing changes

    It is this original Toshiba battery with Toshiba logo?

    Start your laptop without battery and when the OS is fully charged, it implemented. Recognized correctly battery or the same thing happens again?

  • My macbook pro mid-2012 is very slow. Do I need a new battery?

    Hello world

    Support on this community has helped me tremendously before so I thought I'd post again about a new problem.

    I upgraded my Mac with an SSD, which works very well, with more RAM; However, recently, it has been very slow and train, and I don't know why. RAM is not being crazy, so it must be something else.

    After reading the other posts, I'm thinking maybe I need a new battery? I mean I have 893 cycles ahah. Could someone help with this?

    Here is my log of Etrecheck:

    EtreCheck version: 2.9.12 (265)

    Report generated 2016-06-07 02:57:40

    Download EtreCheck from https://etrecheck.com

    Time 01:38

    Performance: Excellent

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Problem: Computer is too slow

    Hardware Information:

    MacBook Pro (13-inch, mid-2012)

    [Data sheet] - [User Guide] - [warranty & Service]

    MacBook Pro - model: MacBookPro9, 2

    1 2.5 GHz Intel Core i5 CPU: 2 strands

    8 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 4 GB DDR3 1600 MHz

    BANK 1/DIMM0

    OK 4 GB DDR3 1600 MHz

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = battery check - Cycle count = 893

    Video information:

    Graphics Intel HD 4000

    Color LCD 1280 x 800

    Software:

    OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

    Disc information:

    500 GB SAMSUNG SSD 850 EVO Disk0: (500,11 GB) (Solid State - TRIM: Yes)

    EFI (disk0s1) < not mounted >: 210 MB

    SAMSUNG SSD 850 EVO 500 G Media (disk0s2) /: 499,11 go-go (287,31 free)

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    MATSHITADVD-R UJ - 8À8)

    USB information:

    Apple Inc. FaceTime HD camera (built-in)

    Apple Inc. Apple keyboard / Trackpad

    Computer, Inc. Apple IR receiver.

    Apple Inc. BRCM20702 hub.

    Apple Inc. Bluetooth USB host controller.

    Lightning information:

    Apple Inc. Thunderbolt_bus.

    Configuration files:

    / etc/hosts - number: 20

    Guardian:

    Any where

    Kernel extensions:

    / Library/Extensions

    [loading] com.globaldelight.driver.BoomDevice (1.4 - SDK 10.10 - 2016-06-03) [Support]

    Launch system officers:

    [loaded] 8 tasks Apple

    [loading] 162 tasks Apple

    [operation] 68 tasks Apple

    Launch system demons:

    [loaded] 47 tasks Apple

    [loading] 163 tasks Apple

    [operation] 81 tasks Apple

    Launch officers:

    [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-05-12) [Support]

    [loading] com.google.keystone.agent.plist (2016-03-02) [Support]

    Launch demons:

    [loading] com.adobe.ARMDC.Communicator.plist (2016-05-12) [Support]

    [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-05-12) [Support]

    [loading] com.adobe.fpsaud.plist (2016-05-09) [Support]

    [loading] com.bombich.ccchelper.plist (2015-11-30) [Support]

    [loading] com.google.keystone.daemon.plist (2016-03-02) [Support]

    [loading] com.microsoft.office.licensing.helper.plist (2015-01-16) [Support]

    [loading] net.freemacsoft.LiteIcon.LIHelperTool.plist (2014-08-26) [Support]

    [loading] org.cindori.SenseiTool.plist (2015-12-03) [Support]

    [loading] org.cindori.TEAuth.plist (2015-12-03) [Support]

    org.eyebeam.SelfControl.plist [no charge] (2016-04-28) [Support]

    User launch officers:

    [failure] com.adobe.ARM. [...]. plist (2016-01-09) [Support]

    Items in user login:

    Workflow application (/ Applications/Flux.app)

    PopClip application (/ Applications/PopClip.app)

    BetterSnapTool application (/ Applications/BetterSnapTool.app)

    Alfred 2 Application (/ Applications/Alfred 2.app)

    ClipMenu application (/ Applications/ClipMenu.app)

    Decision on application (/ Applications/Hear.app)

    Fan of Macs control application (/ Applications/Mac Fan Control.app)

    Hocus Focus application (/ Applications/Hocus Focus.app)

    Other applications:

    [operation] 2BUA8C4S2C.com.agilebits.onepassword - osx-helper

    [ongoing] com.crystalidea.MacsFanControl.60192

    [ongoing] com.etresoft.EtreCheck.207712

    [ongoing] com.globaldelight.BoomDaemon

    [ongoing] com.google.Chrome.163232

    [ongoing] com.hegenberg.BetterSnapTool.49632

    [ongoing] com.naotaka.ClipMenu.52192

    [ongoing] com.pilotmoon.popclip.291872

    [operation] com.runningwithcrayons.Alfred - 2.166432

    [ongoing] com.uglyapps.HocusFocus.264992

    [ongoing] org.herf.Flux.119072

    [loading] 412 tasks Apple

    [operation] 173 tasks Apple

    Plug-ins Internet:

    o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-15) [Support]

    GameFacePlugin: GameFacePlugin 1.8.0.1 - SDK 10.5 (2012-11-16) [Support]

    Unity Web Player: UnityPlayer version 5.0.3f2 - SDK 10.6 (2015-08-04) [Support]

    Default browser: 601 - SDK 10.11 (2016-05-17)

    AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2015-11-30) [Support]

    FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-21) [Support]

    AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

    Silverlight: 5.1.30514.0 - SDK 10.6 (2015-11-30) [Support]

    QuickTime Plugin: 7.7.3 (2016-05-17)

    Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-21) obsolete! Update

    googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

    PepperFlashPlayer: 21.0.0.242 - SDK 10.6 (2016-06-07) [Support]

    AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

    SharePointBrowserPlugin: 14.4.8 - SDK 10.6 (2015-02-26) [Support]

    JavaAppletPlugin: 15.0.1 - SDK 10.11 (2015-11-30) check the version of

    User Plug-ins internet:

    samesurf_screenshare_32: Unknown (2014-08-10)

    Safari extensions:

    1Password - AgileBits - https://agilebits.com/onepassword (2015-09-10)

    AdBlock - BetaFish, Inc. - https://getadblock.com (2015-09-27)

    Adblock more - Eyeo GmbH - https://adblockplus.org/ (2015-09-27)

    ClickToFlash - Marc Hoyois - http://hoyois.github.com/safariextensions/clicktoplugin/ (2015-08-04)

    Audio Plug-ins:

    Hear: 1.1.6 - SDK 10.8 (2014-11-03) [Support]

    3rd party preference panes:

    Flash Player (2016-05-09) [Support]

    FUSE for OS X (OSXFUSE) (2015-10-25) [Support]

    Time Machine:

    Mobile backups: OFF

    Automatic backup: NON - automatic backup disabled

    Volumes to back up:

    Destinations:

    Seagate 3TO [Local]

    Total size: TB 3.00

    Total number of backups: 4

    An older backup: 2014-12-12, 14:35

    Last backup: 2015-11-23, 08:35

    Size of backup drive: Excellent

    Size of backup 3.00 TB > (disk size 0 B X 3)

    Top of page process CPU:

    67% Google Chrome Helper (6)

    37% Google Chrome

    6% kernel_task

    6% WindowServer

    2% PopClip

    Top of page process of memory:

    770 MB Google Chrome Helper (6)

    Kernel_task 747 MB

    Chrome Google 188 MB

    Mdworker (9) 172 MB

    Mds_stores 164 MB

    Virtual memory information:

    4.25 GB free RAM

    used 3.75 GB RAM (1.70 GB being cached)

    Used Swap 0 B

    Diagnostic information:

    7 June 2016, 02:50:29 self-test - spent

    Hello. Try restarting your Mac.

    Try to start:

    -Stop your Mac

    -Wait until your computer turns off and after that press the power button

    -Just after you hear the startup tone, press in and hold the SHIFT key

    -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

    -Once your Mac boot, restart dhcpd as you usually do.

    If this does not help, follow the instructions below:

    -Stop your Mac

    -Wait until your computer turns off and after that press the power button

    -Just after you hear the startup tone, press in and hold the SHIFT key

    -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

    -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

    -Click on the disc to check, then, if requested to solve the problems on the repair disk

    -After that click on verify disk permissions, and then click Repair disk permissions

    -Once the process is complete, stop your Mac and turn it on again after 30 seconds

    Apart from this, take a look at this article from Apple and follow the instructions to reset NVRAM shown here:How to reset the NVRAM on your Mac - Apple Support

    Try resetting the system management controller: https://support.apple.com/en-us/HT201295

    I also suggest upgrading your RAM.

    I hope this helps!

  • Satellite U400-10n - no battery detected

    I just got my new laptop U400-10n and I get the "no battery detected.
    What I need to get the service?

    Hello

    I read in this forum about similar problem

    It seems that the BIOS update should help you to get rid of this annoying problem.

    Check it out

    Visit the page of European driver of Toshiba, download the compatible and the right BIOS and update.

  • Equium A300 does not recognize new battery

    I just got a new battery for my laptop. I plugged it in and it turns on ok and works ok on battery power, however... the battery meter in the taskbar is not recognizing the new battery.

    I get the error message "Battery not detected" when battery attached and AC plugged in, and I get "Remaining unknown" when just on battery and removed AC.

    My specs are:

    Toshiba Equium A300D-13 X
    Windows Vista Edition Home Premium

    Generic brand PA3534U-1BRS battery replacement
    Li-ion 11.1V / 7200mAh

    (Original Toshiba PA3534U-1BRS battery
    Li - ion 10.8V / 4000mAh
    replaced due to discharge very quickly: 20 minutes)

    Any help is appreciated all what I need to do to get the job of battery meter.

    Gill

    Hi mate,

    If I understand correctly you don t use an original Toshiba battery more. Well, this could be the reason for your problem.

    What's the battery old Toshiba, original properly recognized by Windows? If so the case is clear: you should buy a Toshiba original battery! ;)

  • Satellite A300 - new battery compatibility problem

    Hello

    My apologies if this question is in the wrong part of the forum but I need help with a problem of battery for my Toshiba laptop.

    I have a Satellite A300 and did it for about 4 years.
    Battery recently not to organize free and put this up to age so I ordered a new online.
    My previous battery had issue PA3534U-1BRS DC 10.8V and 4000 mAh and my new battery PA3534U-1BRS DC 10.8V and 4000 mAh.

    The problem is that the computer does not seem to like it.
    If I put the battery and connect the power adapter red battery icon will show and stay for about 5 minutes before you start to Flash.
    When I turn on the computer and log on to the computer displays "battery not detected" in the battery in the tool bar icon.
    I couldn't so far to charge the battery.

    What I am doing wrong? Any ideas on how I can get around this?

    Any help gratefully received

    Thank you

    Hello

    First of all there are no many things that must be done if you replace the battery.
    The new battery should be automatically recognized by laptop and the Windows System.
    If it s not the case, then the battery is not completely compatible or malfunctioning.

    There are several batteries on the market; origin and original parts parts
    I recommend buying an original Toshiba Toshiba service block in your country.
    In this case, you can be sure that you bought a fair and good share for your laptop to 100%.

  • New battery for Ideapad Z510

    My Lenovo Ideapd Z510 battery died right after a year.
    and no one does it on this thread https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Lenovo-Z510-Battery-Issues/td-p/2040767

    I want to buy a new battery for battery Ideapd Z510.
    Thus,.
    1 should. What battery I buy? What models and technical details?
    2. where can I get the Ideapd Z510 battery online in INDIA? That they are not available to Lenovo from retailer. ?

    In response to customer relationships of unexpected problems with the performance of the batteries portable Z500 and Z510, Lenovo made an update of the firmware of battery available via download on the Lenovo Forums.

    This battery firmware is intended to solve unexpected load following symptoms when a Z500 and Z510 mobile phone is turned on:

    • Battery is dead

    • Battery is not detected

    • Battery is detected and charged 100%, but when the power is removed, the laptop turns off immediately

    • When the battery is fully charged and the AC power is removed, the battery level falls considerably less than 10 minutes

    Please note a procedure step by step for the upgrade of the firmware is included in the .zip file, found in the file "ReadMe".

    The battery firmware update can be downloaded here: https://download.lenovo.com/lenovo/content/sm/z500_z510_battery_firmware_update.zip

    Thank you

  • IMY laptop says 'no battery detected'-what it means and I can fix it?

    I can't use my laptop unless it is plugged into mains, when I checked the status of the battery it does say 'no battery detected', but I know that there is a battery inside my laptop. I can do about it, my computer laptop is not very old.

    Hello

    Check with support from the manufacturer of their books online and the drivers and their forums system
    (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
    problems.

    Control Panel control - plan change Options - power plans - power - advanced settings
    Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
    long to load).

    In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
    systems overload are not a problem.

    Here are some tips to help and troubleshoot battery issues.

    Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
    eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
    them and be careful). Batteries are old, or it could be a problem with the computer.
    Check with the support of the machine system, and many of them have on line forums.

    New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
    However on a laptop that not extend their life a lot. Best is to use the a/c adapter
    When this is possible.

    I use the free version of BatteryBar to monitor my battery. Click on the green button on the
    Yellow box on the right side of the page to download the latest stable version.

    BatteryBar - free version available
    http://osirisdevelopment.com/BatteryBar/index.html

    Another good program

    Vista battery saver - free
    http://www.codeplex.com/vistabattery

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    You can also check with the manufacturer of system and forums that many use their own
    proprietary software to monitor the battery and they could be known problems with your battery.

    ============================================================

    Try this - to make a Restore Point

    How to create a Vista System Restore Point
    http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
    Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
    RESTART which will update the driver stacks.

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    I hope this helps.

  • Computer shows no battery detected

    Original title: I have a new battery in my pc, but my computer says "no battery detected. I don't understand. Please can someone help?

    I have a Dell and I heard they sometimes have battery problems. Other than my question, I'm not sure of any other useful information.

    Hello

    Try the troubleshooting steps below and see if they help.

    Method 1

    You can perform a cycle of power to the laptop and check if it solves the problem.

    1. disconnect any external devices to the laptop.

    2 remove the battery from the laptop.

    3. press the power button of the laptop for 10-15 seconds.

    4. Insert the battery in the laptop and restart the computer.

    5. connect the AC adapter and check.

    Method 2

    You can also contact the manufacturer of your computer to update the BIOS (Basic Input Output System) and drivers from the chipset.

    Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

    You can also contact the manufacturer of the battery can be damaged or dead.

    http://support.Dell.com/support/topics/global.aspx/support/hardware/hardware_portal?c=us&l=en&s=DHS

    See also:

    REFERENCE DELL LAPTOP BATTERY FAQ
     
  • No battery detected on a month old Dell

    I have a new Dell less than a month. I noticed this morning that the icon says no battery detected. When I unplugged the power cable it will turn off. Battery is installed and worked fine so far

    Because it is almost brand new and should still be under warranty, you can call Dell technical support.  Enter information in the following link will direct you to the appropriate phone number: http://www.dell.com/support/incidents/us/en/19/Phone/PhoneTagEntry?c=us&s=dhs&cs=19&l=en

Maybe you are looking for

  • View the maximum and minimum values on the waveform

    Hi, I have a table of waveform and want to display the values of maximum and minimum of the graph with the arrow. I tried to change with the property node, but I still haven't expected output. Could someone can help on this? Attached to the vi.

  • YouTube shows "we're sorry, this video is no longer available.

    I had this problem lately where my SL400 isn't more Youtube videos and give this message "we're sorry, this video is no longer available" for all videos. The work around I've read on the web has not worked for me since I don't have Google Web acceler

  • Problems installing updates for xp service pack 2

    I am not able to install xp sp2 on my computer. I have xp home edition, version 5.1 and is running xp sp1.  After the update download I get an error message saying it could not read the files (or something like that), I tried to run the update from w

  • Mini speaker shows not all light

    My mini speaker x does not show a blue or red light on the side and now won't play and when I try to charge it to the laptop it stops the laptop immediately, it is as if she has just died, what to do

  • '=', ', ';', 'asm' or '__attribute__' before error for the header WHEREAS C++ file.

    The path location type Resource DescriptionEXPECTED '=', ', ',';', 'asm' or '__attribute__' before 'geolocation '. I searched high and low in Google to find a solution to this.  The header file is GeoLocation.hpp and it is the class declaration "clas