PEAP EAP/TLS, PORTEGE with WinXP sp2 Tablet Edition problem

We have: Rev AiroNet350 Cisco with WPA - EAP: Freeradius with EAP/TLS and PEAP, tablet PC PORTEGE with WinXP sp2 configuration.

This problem discribed in http://wiki.freeradius.org/index.php/FAQ#PEAP_Doesn.27t_Work
Perhaps to solve this problem we need a fix (http://support.microsoft.com/kb/885453/en-us), but microsoft support said to contact the laptop manufacturer.
Can someone help me with this problem?

Hmmm I m not an expert in this area, but it seems that the MS OS update is necessary. (I hope)
The preinstalled Windows operating system is a simple OEM version and generally all updates should be possible. However, if MS guys told you to communicate with the manufacture of the laptop, you can contact the maintainer authorized Toshiba in your country for details.

But I studied a bit on the net and found this site useful:
http://SearchNetworking.TechTarget.com/originalContent/0, 289142, sid7_gci945257, 00.html

1. 802. 1 X is based on communication between your router and a RADIUS authentication server. If you use WEP, WPA or WPA2 with dynamic keys, 802. 1 X debugging following tips may be useful:
a. reintroduce the same RADIUS secret in your wireless router and the RADIUS server.
b. configure your RADIUS server to accept the request of the RADIUS of the IP address of your router.
c. use ping to check the accessibility of router-server.
d. package watch LAN account to verify that RADIUS and answers queries are fluid.
e. use an Analyzer like Ethereal Ethernet to watch RADIUS success/failure messages.
f. for XP SP2, turn on Wzctrace.log by typing "command netsh ras set followed * activated.

2 if RADIUS is flowing but are rejected requests for access, you may have a problem of incompatibility or credential X Extensible Authentication Protocol (EAP) 802.1. This setting depends on Type EAP. For example, if your RADIUS server requires EAP - TLS, then select 'Card chip or other certificate' of your adapter wireless network properties / authentication Panel. If your RADIUS server requires PEAP, then select "Protected EAP" of the adapter. If your RADIUS server requires EAP-TTLS, then you will need a third-party wireless like AEGIS or in Odyssey client.
Make sure that this specific EAP properties match for your adapter and the server, including the server CA certificate root trust Server domain name (optional but must match when it is specified) and the customer (EAP-MSCHAPv2, EAP - GTC) authentication method. When you use PEAP, use the control panel to 'Configure' CHAP to prevent Windows from automatically re-use of your connection.

Tags: Toshiba

Similar Questions

  • ThinkPad X61t: can I use a pen device with WinXP without Tablet Version?

    Ladies and gentlemen,

    Please tell me the truth: I can use not compresses-version of Windows XP with a pen-Interface?

    Can I organize Pen Interface with any kind of drivers, or I need to install the Tablet PC of Windows version?

    And maybe ordinary Windows XP can become a Tablet XP version after installation of drivers of special magic?

    You know any type of software to activate the pen device and touchscreen under non-tablette WINDOWS XP.

    Or it is impossible?

    Thank you for the answers.

    Well, you can get the driver here http://www.wacom.com/productsupport/select.cfm it's only 'pen' good pilot.

    If you need to contact, you can always install driver multitouch above after that.

    Have fun with your tablet,

    sipp11

  • Restore the Portege P3500 win xp tablet edition

    Anyone can provide copies of records of restoration for the portege P3500.

    From time to time, I saw on eBay from the recovery discs for the old models of laptops. Check it out.
    It is not easy to find old recovery disks.
    What you can try is to contact the Toshiba service provider in your country. Maybe they can help you and get a copy for you.

  • Download with Muse FTP and editing problems.

    Hello

    Please help if you can.

    I got to create my Web site and it launched on Adobe businesscatlyst and it sounds great!

    http://magicorganic.BusinessCatalyst.com/

    There is a big problem of loading to the top of my host. IPage.

    First, I loaded it with the feature of FTP, Muse and he stopped 61% download and I got an error message about the images.

    Then I exported the files in my documents. (And noted there is no Home Page didn't mention just Index) here:

    Html folder.jpg

    I then uploaded manually to IPage: here

    Website files.jpg

    and seen my site www.magicorganic.co.uk and its all over the place. I then tried to download again using FTP with the files already on the host computer and loaded before 91% and error message. See here:

    Error.jpg

    If anyone has any ideas where to go with this please gt back to me.

    Thank you very much

    I found that simply removing the "/" in the FTP dialog under "host directory", your problem is solved. Apparently the Muse adds the ' / ' and if you have one in the dialog box, there will be two instead of a single responsible for the mistake. I'm not a technician and just discovered this fix. I hope that helps!

  • ACS 5.4 EAP - TLS: the system of null or invalid message met CSCOacs_Internal_Operations_Diagnostics 31201

    Hi all

    I am trying to configure wireless with 802.1 x, authetication in the EAP - TLS computer with digital certificates, but it does not work.

    It runs on ACS 4.2.

    The message is ACS CA is not known, but it is configured correctlry.

    I have a "Wireless" accesses with identity store AD1 policy. I also tried to set up CN, SAN and a lot of identity store sequences, same results.

    At the time of authentication, I also see this log message:

    System encountered null or invalid message

    CSCOacs_Internal_Operations_Diagnostics

    31201

    I could be associated to?

    Can someone help me?

    THX,

    Andrea

    I see the certificates installed have been already expired.

    Regarding your second question, where do you see a mistake. I suspect a defect.

    CSCtw48906    Error due to an empty message (vector buffer), sent to the enforcement process

    Symptom: An Error Message is seen inlogs: message of the ERROR encountered CSCOacs_Internal_Operations_Diagnostics 31201 null or invalid system

    Conditions: ACS 5.2

    Solution: The issue is cosmetic. This message can be ignored.

    Under the guidance of the Director, this occors error when a message empty (vector buffer) that was sent to the runtime on the message Bus and it seems to be "cosmetic" question

    In default, debugging is attached. If you wish, you can activate the debbuging level performance logs and match symptoms.

    Here are the steps to generate support bundle.

    ACS / admin # acs - config

    Escape character is CNTL/D.

    Username: acsadmin

    Password:

    ACS/admin(config-ACS) #.

    Set logging for debug mode.

    ACS/admin(config-ACS) # debug level to debug-log duration

    ACS/admin(config-acs) #exit

    Collect the beam of support after reproducing the problem.

    Jatin kone

    -Does the rate of useful messages-

  • Novell NDS CA and EAP - TLS

    Hi all

    I configured an ACS Server 4.1 with Novell CA authentication certificate. internal to the ACS server works very well and the group maps also works without problems.

    Now, the customer wants to use eap - tls in the wlan configuration. Authentication with user name and password works fine. If I activate the validate the certificate of the server in the windows xp wireless configuration settings, that I do not have access to the network. I get an error message on the client and in the journal of the CSA, I see an error with eap - tls ssl handshake!

    Are there problems with certificates of AC novell and novell?

    Any ideas?

    Thanks for help

    René

    Hello

    Mark this thread as solved, so that others can enjoy.

    Thank you

    Prem

  • Wrong with EAP - TLS with Wireless before Windows logon

    Evil begins with a list of equipment;

    5508 WLC

    3502i AP

    Cisco ACS 5.3

    Clients Windows 7

    WLAN is set up with WPA2 AES with 802. 1 x for key management.

    Customer is set up with WPA2/AES, authentication method is Microsoft: card chip or other certificate on the computer. Authentication mode authentication is the user or computer.  The client is configured to use a certificate on the computer.  "It only works if the authenticating user or computer is seected."  If I use computer authenticate option... it says that it cannot find a certificate to use for the EAP.

    ACS is configured to allow only for the EAP - TLS protocol.

    We have created a stand-alone CA server and distributed CA certificates root and client authentication for all test systems.

    This whole process with EAP - TLS works very well if you are already connected to the machine, with the credentials of the cache.  Once I disconnect the Windows 7 client, I lose the connection to the WLAN.  We want to stay connected to the WIFI network.  W PEAP / MSCHAPV2 works very well with stay connected to the WLAN, but we want to use EAP - TLS.

    Any ideas?

    Thanks in advance,

    Ryan

    Hi Ryan,

    You actually answer your own question :) The reason for the fault is because the computer account doesn't have a certificate, so when your computer account user cannot connect to maintain the session going, and so you are disconnected. Provide the computer with a certificate account and your problem will be solved.

    Richard

  • WiFi with EAP - TLS works on the Xoom?

    Did anyone had success with using the Wifi requiring user certificates? I try to get my Xoom to connect to the corporate network (EAP - TLS) and followed the instructions for the IPad and imported my homologated in Android correctly. But when I connect, it hangs to the connection state minutes before finally giving up.

    Thank you

    Yale


  • EAP - TLS with WLC 4404 (choose which layer option 2)

    Hi all

    I want to install a WLAN that uses EAP - TLS.

    WiFi PC <----->LWAP <------>WLC <---->Radius Server

    Should the layer tab 2 for security on the WLC which option I use for the following: -.

    Security Layer 2 (I'm assuming that WPA + WPA2 than what laptops will use)

    Key auth Mgmt?

    I'm a little confused by the 802. 1 x in two of these fields, a security layer two and one for Auth key Mgmt?

    Thx a lot indeed guys,.

    Ken

    You would choose layer 2 security: WPA + WPA2

    Then in the settings WPA + WPA2 choose political WPA2 with WPA2 encryption. Under authentication key Mgmt select 802.1 x.

    Now if you need the use of WPA policy, then also choose TKIP for this.

    Choose your radius servers so for your AAA server tab.

    That's all.

  • 4.2 of the ACS and EAP - TLS with AD and prefix problem

    Hello

    We have the following situation:

    -2 X ACS (ACS SE 4.2 1 x and 1 x 4.2 ACS) for domain

    -2 x ACS (ACS SE 4.2 1 x and 1 x 4.2 ACS) for domain b.

    First of all, there is a problem to have an ACS SE and a CBS work together for an area, I do not? When we haven't had that one area and the two SE ACS were responsible for domain A, it worked.

    Now after the changes, authentication of machine with EAP - TLS is no longer in effect. In the newspapers, it always says that "external user DB is unknown" for a username (machine) as host/abc.domain.ch

    This is the normal output of the Remote Agent, he finds the host but then nothing happens:

    CSWinAgent 2009-11-30 16:32:13 0140 3672 0x0 customer who connects from x.x.x.x:2443
    CSWinAgent 2009-11-30 16:32:14 0507 3512 0x0 CPP: NT_DSAuthoriseUser received
    CSWinAgent 2009-11-30 16:32:14 0474 3512 0x0 NTLIB: Creating Domain cache
    CSWinAgent 2009-11-30 16:32:14 0549 3512 0x0 NTLIB: domain Cache loading
    CSWinAgent 2009-11-30 16:32:14 0646 NTLIB 3512 0x0: none of the trusted domains found
    CSWinAgent 2009-11-30 16:32:14 0735 3512 0x0 NTLIB: cache loaded field
    CSWinAgent 2009-11-30 16:32:14 2355 3512 0x0 NTLIB: user "host/abc.domain.ch" found [FIELD]
    CSWinAgent 2009-11-30 16:32:14 0584 0 x 3512 0 RPC: NT_DSAuthoriseUser response sent

    So I did a test of the ASA to see if the host is a problem (until changes have been made it was not a problem):

    AAA authentication RADIUS host 10.3.1.9 username host/abc.domain.ch to test (the ASA becomes the host / entry for the correct Windows scheme with the $):

    CSWinAgent 2009-11-30 15:39:23 0140 3672 0x0 customer who connects from x.x.x.x:1509
    CSWinAgent 2009-11-30 15:39:23 0390 0 x 3728 0 RPC: NT_MSCHAPAuthenticateUser received
    CSWinAgent 2009-11-30 15:39:23 0474 3728 0x0 NTLIB: Creating Domain cache
    CSWinAgent 2009-11-30 15:39:23 0549 3728 0x0 NTLIB: domain Cache loading
    CSWinAgent 2009-11-30 15:39:23 0646 NTLIB 3728 0x0: none of the trusted domains found
    CSWinAgent 2009-11-30 15:39:23 0735 3728 0x0 NTLIB: cache loaded field
    CSWinAgent 2009-11-30 15:39:23 1762 3728 0x0 NTLIB: had WorkStation CISCO
    CSWinAgent 2009-11-30 15:39:23 1763 3728 0x0 NTLIB: Windows authentication attempts for user ABC$
    CSWinAgent 2009-11-30 15:39:23 1815 3728 0x0 NTLIB: Windows authentication FAILED (Error 1326 L)
    CSWinAgent 2009-11-30 15:39:23 0373 3728 0x0 NTLIB: retry authentication to the domain
    CSWinAgent 2009-11-30 15:39:23 0549 3728 0x0 NTLIB: domain Cache loading
    CSWinAgent 2009-11-30 15:39:23 1762 3728 0x0 NTLIB: had WorkStation CISCO
    CSWinAgent 2009-11-30 15:39:23 1763 3728 0x0 NTLIB: Windows authentication attempts for user ABC$
    CSWinAgent 2009-11-30 15:39:23 1815 3728 0x0 NTLIB: Windows authentication FAILED (Error 1326 L)
    CSWinAgent 2009-11-30 15:39:23 0456 0 x 3728 0 RPC: NT_MSCHAPAuthenticateUser response sent

    It is clear that the test failed because of the bad 'past to a computer' but it's a different output as before. I saw that in ACS 4.1, you can change the prefix of send_break_action for nothing, but in 4.2 it is no longer possible.

    This could be the problem, or if someone sees no other problem?

    Best regards

    Dominic

    Hello

    I encounter the same problem with my acs. I have all of the attempts failed for the default group. For the default group made configuration is not available. Is - this thereason behind all this?

  • 802. 1 x EAP - TLS for wired users with ACS 5.5

    Hi all

    We are setting up a new configuration for wired users authentication with 802.1 x (EAP - TLS). ACS 5.5 we use as an authentication server.

    We have added the certificate (internal) CA root and certifcate for ACS signed by CA. Now, we want to check that authentication works or not. I hope that the CA root and identity certifcate also we need to install in laptop computers. But I don't know how to download the certifcates for client machine manually to CA.

    Please suggest on how to get certificates for clients both manually and automatically?

    Thank you

    Vijay

    Hi Vijay,

    for Wired 802.1 x (EAP - TLS) you must have the following certificates:

    Intermediate server on ACS - Root CA, CA certificate,

    The customer - Root CA, intermediate CA, user certificate (in the case of user authentication) or Machine certificae (in the case of authentication of the computer)

    I do not know what third-party certificate you use, if its Microsoft in the House or any other certificate server, you need to download the client certificate to the server itself.

    In the case of Microsoft, there will be a user certificate template. You can select and create user certificate

    This is an old document, but a computer certificate for the user configuration steps, you can see the steps to download the certificate user if his server from Microsoft:

    http://www.Cisco.com/c/en/us/support/docs/security/secure-access-control...

    In case you use the third serevr certificate, then you must check with them on how to download the certificate of the user

    See you soon

    Mohammed (rate useful message)

  • Cisco ACS with external DB - EAP - TLS

    Hi guys,.

    I understand how the EAP - TLS exchange works (I think), but if I have a client (with or without wire) that uses EAP - TLS with a CBS, I confirm the following.

    Let both users and computer certificates are used:

    1. customer and ACS are with each of the other automatic certificates to ensure they are known to each other. The eap - tls Exchange.

    2A. At any given time and I'm assuming until the successful eap - tls message is sent to the client, the ACS to check if the user name or computer name is in the AD database?

    2B. Wot is the parameter that is checked on the AD database?

    I read here that it can be: http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/configuration/guide/peap_tls.html#wp999517

    Client certificates

    The client certificates are used to identify with certainty the user in EAP - TLS. They have no role in the construction of the TLS tunnel and are not used for encryption. A positive identification is made by one of three ways:

    CN (or name) comparison-compare CN in the certificate with the user name in the database. More information on this type of comparison is included in the description of the subject field of the certificate.

    Comparison of SAN-compare the San in the certificate with the user name in the database. It is only supported from the ACS 3.2. More information on this type of comparison is included in the description of the field another name of the subject of the certificate.

    Binary comparison - compare the certificate with a binary copy of the certificate stored in the database (only AD and LDAP for that). If you use the binary comparison of certificate, you must store the user certificate in a binary format. Also, for the generic LDAP and Active Directory, the attribute that stores the certificate must be the standard LDAP attribute named "usercertificate".

    3. with the foregoing, if options 1 or 2 are used (CN or SAN comparison), I guess it's just a check between a value out the CERT of the ACS and checked with AD, is that correct? With option 3, GBA exercise a complete comparison of the certificate between what the client and a "cert stored client" on the AD DB?

    Please can someone help me with these points.

    I'm so lost in this kind of things :)) I think.

    Thx a lot and best regards,

    Ken

    TLS only * handle * is complete/successful, but because the user authentication fails.

    CryptoLib.SSLConnection.pvServerInfoCB - process of TLS data: State = SSLv3 client SSL read Exchange of keys A

    CryptoLib.SSLConnection.pvServerInfoCB - process of TLS data: State = SSLv3 read Certificate SSL check

    CryptoLib.SSLConnection.pvServerInfoCB - process of TLS data: SSL = SSLv3 read state completed A

    CryptoLib.SSLConnection.pvServerInfoCB - process of TLS data: State = SSLv3 write change cipher spec A SSL

    CryptoLib.SSLConnection.pvServerInfoCB - process of TLS data: SSL = SSLv3 write finished State has

    CryptoLib.SSLConnection.pvServerInfoCB - process of TLS data: State = SSLv3 data embedded SSL

    CryptoLib.SSLConnection.pvServerInfoCB - process of TLS data: State SSL = SSL handshake completed successfully

    EAP: EAP - TLS: handshake succeeded

    EAP: EAP - TLS: authenticated handshake

    EAP: EAP - TLS: CN using the certificate as an authentication identity

    EAP: State EAP: action = authenticate, username = 'Jousset', the user identity is "jousset.

    pvAuthenticateUser: authenticate "jousset" against CSDB

    pvCopySession: assignment session group ID 0.

    pvCheckUnknownUserPolicy: Group of session ID is 0, the call pvAuthenticateUser.

    pvAuthenticateUser: authenticate "jousset' against the Windows database

    External DB [NTAuthenDLL.dll]: Cache of Creating Domain

    External DB [NTAuthenDLL.dll]: Domain for loading Cache

    External DB [NTAuthenDLL.dll]: no UPN Suffixes found

    External DB [NTAuthenDLL.dll]: could not get the domain controller for dwacs.com trust, [error = 1355]

    External DB [NTAuthenDLL.dll]: could not get the domain controller for enigma.com trust, [error = 1355]

    External DB [NTAuthenDLL.dll]: could not get the domain controller for acsteam.com trust, [error = 1355]

    External DB [NTAuthenDLL.dll]: could not get the domain controller for vikram.com trust, [error = 1355]

    External DB [NTAuthenDLL.dll]: domain loaded cache

    External DB [NTAuthenDLL.dll]: could not find the user jousset [0 x 00005012]

    External DB [NTAuthenDLL.dll]: user Jousset is not found

    pvCheckUnknownUserPolicy: assignment session group ID 0.

    Unknown user "jousset" was not authenticated

    If EAP-failure (RADIUS Access-Reject (is sent, no EAP-Success(Radius Access-Accept).))

    And no matter how port will not be allowed to pass traffic unless the NAS device gets an EAP-Success(Radius Accept) for the user.

    HTH

    Kind regards

    Prem

  • ACS 5.5 with EAP - TLS SHA 256 certificates

    Hi all

    Well, I just want to confirm that ACS 5.5 supports EAP - TLS with certificates SHA2.

    Thank you

    Manel

    Manel salvation,

    There was a time long deposited back enhancement to support EAP - TLS SHA 256 and obtained certificates fixed ACS 5.2 leave.

    CSCtd34175    Support for SHA2 certificates

    To answer your question, ACS 5.5 does support SHA2 certificates with eap - tls.

    ~ BR

    Jatin kone

    * Does the rate of useful messages *.

  • Problem with EAP - TLS EHT begging Provisioning

    Hi all

    I have a demo built using ISE v1.1.3 patch 1 and a WLC by using the v7.4.100.0 software.  The purpose of the demo is available to begging a device with an EAP - TLS certificate...  'device on-boarding.

    The entire CWA / registration of the device, everything is perfect and works well.  I use a Cert publicly signed on ISE built from [Root CA + intermediate CA + host Cert] which is used for HTTPS and EAP and I also PRACTICE operating against my Win 2 k 8 Enterprise Edition CA that belongs to my Active Directory.  It all works very well.

    The problem is that when ISE push the WIFI config to the device, it tells the Client to check for the root CA, but RADIUS within the ISE processes are related to the intermediate CA.  This leads to a problem where the Client does not trust the certificate of the ISE.  It doesn't seem to be a way to configure this behavior within the ISE.

    If anyone else has experienced this? Know a solution? Suggestions for a workaround?

    See you soon,.

    Richard

    PS - also using WinSPWizard 1.0.0.28

    Hi Richard,

    It is a bad behavior ISE is commissioning intermediate CA in similar BYOD of scenarios (hierarchical certification authority) registration process. It'll be fixed soon. The genius is almost ready with the fix.

    István Segyik

    Systems engineer

    Global virtual engineering

    The WW partner organization

    Cisco Systems, Inc.

    E-mail: [email protected] / * /

    Work: + 36 1 2254604

    Monday to Friday from 08:30-17:30 - UTC + 1 (CET)

  • Authentication EAP - TLS with ACS 5.2

    Hi all

    I have question on EAP - TLS with ACS 5.2.

    If I want to implement the EAP - TLS with Microsoft CA, how authentication computer and user will be held?

    Understand that the cert is required on the client and the server end, but is this certificate to the computer links or links to individual users?

    If the links to the user, and I have a shared PC connection by few users, is that each user account will have their own certificates?

    And each individual user will have to manually get the CA cert? is there another method that my environment has more than 3000 PCs.

    And also if it binds to the user, any user can get their CA cert with their AD username and password, if they bring in their own device and try to get the CA certificate, they will be able to properly install the cert in their device on the right?

    I hope you guys can help with that. Thank you.

    Hope this will answer most of your questions:

    Client certificate or user

    http://www.Cisco.com/en/us/Partner/Tech/tk59/technologies_tech_note09186a00804b976b.shtml#T10

    Computer certificate

    http://www.Cisco.com/en/us/Partner/Tech/tk59/technologies_tech_note09186a00804b976b.shtml#T15

    In the case of EAP - TLS we have the certificate of computer and user installed on the machines.

    Kind regards

    Jousset

    The rate of useful messages-

Maybe you are looking for