pedal for guitar organ?

Similar Questions

• Assign pedal for only some sounds in a patch?

  I'm a newbie on MainStage 3, and I ran everywhere I can not solve a problem on many patches that I am programming.

  I would assign my pedal to some sounds in a patch, but not others.  (For example, I want to support to the sounds of piano, carpet and string in a patch, but not for a sound of arp in the same patch.) How would I go to do this?  (A lot of searching through forums/YouTube tutorials has not yet found the solution of it.)

  Thanks for any help you can give!

  In edit mode, click on the channel strip for the sound you don't want to respond to the sustain pedal.

  Then, in the Inspector of channel (down to the center of the screen), click the input tab MIDI.

  On the left side, you will see a list of check boxes labeled "filter". Select the item of "pedal of Sustain (64) ' in this list, and the synth assigned to this channel strip no longer meets the sustain pedal.

  I use this feature a lot in my plots of control meets various controllers synths. For example, I often will filter the controller "Expression (11)" so it does not affect the piano sounds (because the volume of this noise is controlled by the speed), but it affects organ or horns or other.

• How to disable direct sound when you use a plugin for guitar?

  I use the Waves GTR plugin for recording guitar in Logic Pro X, but because it puts a lot of pressure on the CPU, I tried he governs through a "bus" instead of having the plugin separately on every guitar track. The difference is that when I use the bus option, I can't seem to get rid of dry direct sound which is obviously very embarrassing. The only way for me to get rid of the direct sound is to use the RTM plugin on every guitar track that quickly causes the overload program when using several of these titles.

  Anyone know how to get rid of the direct sound when you use the alternative of bus for the guitar tracks?

  just at the exit of the guitar channel strip no output. This way you won't hear at the follow (because the dry track will not be transmitted to any output)

• FS-85USB pedal for Digital Voice Editor

  I have a FS-85USB foot control unit and the CD is not compatible with Windows 8. You have a CD to update I can get if I can use the pedal on my computer to transcribe reports?

  Even if the software was not intended at window 8, this does not mean that it will not work. It is possible that you can install the software, and if it does not work you can try to run the program in compatibility mode. There is unfortunately no new software available for Windows 8.

• Pedal for windows media player

  Hello.  Please can you tell me if I can buy a pedal that will work in windows media player or Cyberlink.  I'm working on the Vista operating system.  Thank you.

  "Lisasobs" wrote in message News: * e-mail address is removed from the privacy *...

  Hello.  Please can you tell me if I can buy a pedal that will work in windows media player or Cyberlink.  I'm working on the Vista operating system.  Thank you.

  It is a free software that allows a pedal controlling a variety of functions...
   
  http://www.windows7download.com/Win7-pedalware-foot-pedal-software/cceehxvk.html
  
  --

  Mike Hall
  http://msmvps.com/blogs/mikehall/

  Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• OfficeJet 6500 has more all - all-in-one makes weird noises like strings for guitar was extirpated

  Operating system is Windows 7.  Bought 2 years ago.  Worked fine until about 2 months ago, when he started to make loud noises.  Will print still, she began to stop in the middle of print intermittently job.  DIY online resources say that it needs to be cleaned.  I hesitate to try to do this without instructions or other suggestions from HP or a member of the community who has solved this same problem.  Cannot find any printer repair shop that will serve an inkjet.   Any ideas?

  Hello my shadow,

  Welcome to the HP Forums! I understand your Officejet 6500 a fact of loud noises. Please follow these steps to try to solve your problem:

  Now, determine the noise is coming from can be difficult, and it could also be a number of reasons why.

  Make sure that the printer is connected to a live wall, not a surge protector. This step is required because it will check if you have the same problem.

  Sometimes paper stuck in the printer can make these noises or to transport back and forth.

  This document here, HP is the right section to double check there is no paper in the printer.

  Try to clean the rollers of paper of this HP document on The Noise is produced when you print.

  I would like to know how your progress.

• No sound when guitar hung on the macbook air.  entrance monitoring, on strong connections.  Speakers as microphones, strangely, but nothing straightens guitar sound.

  Hi all

  I'm operating out of a brand new MacBook Air.  I tried to interfacing with 2 separate 3.5 mm adapters, but also a USB adapter without success.  I have followed input turned on and I am getting no sound what so ever of the guitar.  Strangely, my speakers seem to act like microphones when I am connected, but nothing is to recognize that a guitar is plugged.

  Very simple configuration.  The Paul > electric guitar string > guitar string 1/4 in an adapter of > 3.5 mm 3.5 mm adapter into the headphone jack of the computer (also tried USB adapter) > choose the guitar/bass track (also tried audio) > select input 1 (or USB) > monitoring of activated entry = absolutely no sound guitar!

  Any guidance here will be very appreciated.

  Thank you!

  The headphone jack is an exit, not an entrance and the USB is a digital input, your Les Paul is not digital, so that all the senses.

  Get a USB preamp for guitar, connect through that.

  Nice axis incidentally.

• Cannot open the driver for Roland GR - 55 with Win.7

  Downloaded the driver for guitar synthesizer Roland Roland Support but still get the message "year error has occurred, uninstall Uninstall exe." I tried many options and run as administrator, but without success, someone with useful advice is welcome.

  Their download is a ZIP file - you extract the contents of the file first? For a program to open ZIP files:

  7-zip:
  http://7-zip.org/

  To contact their support for assistance:
  http://www.RolandUS.com/support/

• USB foot pedal problem (Infinity IN-USB-2): recognized by Windows but does not work on VMware Workstation 10

  When I connect an Infinity IN-USB-2 pedal for my guest Windows 7 Professional (on Ubuntu 14.04 and VMware Workstation 10.0.2), the pedal gets recognized by Windows and different applications, but by pressing the pedal itself has no effect.

  I downloaded a USB foot pedal Tester (http://vec-infinity-in-usb-1-foot-pedal-tester.soft112.com/) on the client and he acknowledged that the device is connected, but when I pressed on any of the three pedals, the tester has not detected the presses.

  I tried the pedal on a real Windows computer, and it worked fine.

  When I connect the pedals, even with the guest in the foreground, VMware Workstation will appear a dialog box:

  The specified device is claimed by another (usbhid) driver on the host operating system. The device can be used. To continue, the appliance will be first disconnected from its current driver. [Cancel] [OK]

  When I click 'OK', we state above: Windows recognizes that the device is connected, but foot-presses are not detected. My other USB devices are not pop this dialog box. (Click Cancel maintains the device disconnected from the guest.) I don't know if the dialog box is significant or a red herring.

  Here's what/var/log/syslog says when I connect the pedal with the Windows client in the foreground:

  kernel: [281434.822751] usb 2 - 1.7: new low speed USB device number 28 using ehci-pci

  kernel: [281434.920667] usb 2 - 1.7: new USB key found, idVendor is 05f3, idProduct = 00ff

  kernel: [281434.920672] usb 2 - 1.7: new USB device strings: Mfr = 1, product = 2, SerialNumber = 0

  kernel: [281434.920675] usb 2 - 1.7: product: pedal WITH USB

  kernel: [281434.920678] usb 2 - 1.7: manufacturer: VEC

  kernel: [281434.923852] entry: CVE CVE USB pedals as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input38

  kernel: [281434.924239] is hid-generic 0003:05F3:00FF.0016: entry, hiddev0, hidraw3: USB HID device v1.00 [CVE CVE USB pedals] on usb-0000:00:1d.0-1.7/input0

  PSG-probe: check the bus 2, device 28: ' / sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7 '.

  PSG-probe: bus: 2, device: 28 is not a MTP device

  And when I click on "OK" to the dialog, he said:

  kernel: [281480.324926] usb 2 - 1.7: reset low speed USB device number 28 using ehci-pci

  kernel: [281480.900448] usb 2 - 1.7: reset low speed USB device number 28 using ehci-pci

  When I unplug the device, it is said:

  kernel: [281517.582472] usb 2 - 1.7: unplug USB, the device number 28

  Thanks for the ideas on solving this problem.

  Answering my own question: I spoke with a salesman who told this pedal does not work on virtual machines for the following reason:

  These pedals are all just Universal USB controllers that require programs or applications to be able to see and recognize them for use. Because they are installed by the base of Windows and Generic USB devices drivers, they can not be seen my remote computers via USB sharing etc.

  They recommended using a hotkey program to work around the problem. I have not tried this solution, but bought a different pedal that works out of the box with VM: a vP-1 vPedal. Lower build quality than infinity (in my opinion) but it works perfectly.

  This is the idea of the key of the seller:

  I have a solution that will allow you to use the pedal as expected if the remote program who need to use supports the use of shortcut keys. For example, these pedals are commonly used with NCH Software Express Scribe professional software. This software can use either a pedal, or you can assign the playback functions to access keys. In the scenario you are talking you re Express Scribe on the remote computer to use keyboard shortcuts, you then install Pedalware (http://www.altoedge.com/pedalware/index.html), a free Windows only the foot pedal utility made by NCH Software, you then use the Pedalware utility to assign the buttons on the pedal of a keyboard shortcut that coincides with those remote program.

• Addition of virtual column: ORA-12899: value too large for column

  I am using Oracle 11g, OS Win7, SQL Developer
  
  I'm trying to add the virtual column to my test table, but get ORA-12899: value too large for column error. Here are the details.
  Can someone help me in this?
  

  CREATE TABLE test_reg_exp
  (col1 VARCHAR2(100));
  
  INSERT INTO test_reg_exp (col1) VALUES ('ABCD_EFGH');
  INSERT INTO test_reg_exp (col1) VALUES ('ABCDE_ABC');
  INSERT INTO test_reg_exp (col1) VALUES ('WXYZ_ABCD');
  INSERT INTO test_reg_exp (col1) VALUES ('ABCDE_PQRS');
  INSERT INTO test_reg_exp (col1) VALUES ('ABCD_WXYZ');

  ALTER TABLE test_reg_exp
  ADD (col2 VARCHAR2(100) GENERATED ALWAYS AS (REGEXP_REPLACE (col1, '^ABCD[A-Z]*_')));
  
  SQL Error: ORA-12899: value too large for column "COL2" (actual: 100, maximum: 400)
  12899. 00000 -  "value too large for column %s (actual: %s, maximum: %s)"
  *Cause:    An attempt was made to insert or update a column with a value
             which is too wide for the width of the destination column.
             The name of the column is given, along with the actual width
             of the value, and the maximum allowed width of the column.
             Note that widths are reported in characters if character length
             semantics are in effect for the column, otherwise widths are
             reported in bytes.
  *Action:   Examine the SQL statement for correctness.  Check source
             and destination column data types.
             Either make the destination column wider, or use a subset
             of the source column (i.e. use substring).

  When I try to, I get the correct results:
  

  SELECT col1, (REGEXP_REPLACE (col1, '^ABCD[A-Z]*_'))
  FROM test_reg_exp;

  Thank you.

  Yes, RP, it works if you give col2 size > = 400.

  @Northwest - could you please test the same w/o having a clause of regex in col2?
  I have a doubt about using a REGULAR expression in this case Dynamics col.

  Refer to this (might help) - http://www.oracle-base.com/articles/11g/virtual-columns-11gr1.php
  Below excerpt from above link... see if that helps...
  >
  Notes and restrictions on the virtual columns include:

  The indexes defined on the virtual columns are equivalent to a function-based index.
  Virtual columns can be referenced in the updates and deletions WHERE clause, but they cannot be manipulated by DML.
  The tables containing virtual columns may still be eligible for result caching.
  Functions in expressions must be deterministic when the table is created, but can then be recompiled and non-deterministic without for as much invalidate the virtual column. In such cases, the following steps must be taken after the function is recompiled:
  Constraint on the virtual column must be disabled and re-enabled.
  On the virtual column indexes must be rebuilt.
  Materialized views that access the virtual column must be fully refreshed.
  The result cache must be flushed if the virtual column acceded to the request (s).
  Statistical table must be regathered.
  The virtual columns are not supported for the organized and external object in index, cluster or temporary tables.
  The expression used in the virtual column definition has the following restrictions:
  It cannot refer to another virtual column by name.
  It can refer to the columns defined in the same table.
  If it refers to a deterministic user-defined function, it cannot be used as a partitioning key column.
  The result of the expression must be a scalar value. It cannot return that an Oracle supplied the data type, a type defined by the user, LOB or LONG RAW.
  >

  Published by: Vanessa B on October 16, 2012 23:48

  Published by: Vanessa B on October 16, 2012 23:54

• Is it possible to make a guitar with AS3 tuner?

  I would like to put a tuner for guitar on my site: http://www.FuzzyMonkeyTabs.com , but it seems that all programs flash there labeled as just guitar tuners notes guitar of game and expect you to know when your guitar string matches the reference mark.  I saw Java based tuners guitar that will tell you the note you play and how far tune it is like this:

  http://sourceforge.NET/projects/oTuner/files/oTuner/latest/oTuner_Source_Code_for_Programm ers.zip/download

  I wonder if the flash has the ability to analyze sounds to determine their main frequency?  Should I learn some Java coding to accomplish an online guitar tuner?  Thank you guys.

  you will use the micro class, and if you are lucky, you will be able to use the method computespecturm() of class soundmixer with active fft.

• The sound quality of ripped music is very poor

  Hi all

  I have the Windows 7 operating system. I used the Windows Media Player installed to rip all of my old records, as I want to go completely digital and all of my music stored on portable hard drives.

  OT: Windows Media Player

  The problem I have is that with CDs, the sound quality of ripped music is very poor, for example the singers voice can still be heard, but some background instruments can barely be heard or is not audible at all, drums are absent from some songs, guitar, organ or bass is absent from others. That leaves the music sound "tinny" without depth or wealth.

  Is it possible that I can solve this problem?

  Thanks to you all.

  DavidS-13

  Hi David,

  There are two ways to change the rip while settings in the Player library. You can insert a CD into your CD-ROM drive and click Rip settings, or you can click Rip music tab in the Options dialog box. The music tab Rip in the Options dialog box offers additional options that are not available in the Rip settings menu.

  I suggest you to change the RIP settings and see if that helps.

  Change settings for ripping
  http://Windows.Microsoft.com/en-in/Windows7/change-settings-for-ripping-music

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Work with sony m2ts files makes cs4 lag

  Hi all

  My system: PC - Intel Core 2 DUO 3 GHz processor with 2 GB of RAM (E7500) - audio usb interface Lexicon Lambda - NVIDIA GeForce 9800 GTX + video card in windows xp pro service pack 2. First pro cs4 version 4.2.1. I went through the steps described in the "Guide for a question of efficiency" and per the instructions, I have included links to the results DXDiag, MSINFO32 results and screenshots of a couple of screens in Process Explorer:

  E2 http://docs.Google.com/leaf?ID=0b-VxJq-F9J_cYTVjNWEwNTktMTEzZi00ZmUyLTk5MTgtZWQxZTUxMzNhYz & hl = en

  
  http://docs.Google.com/leaf?ID=0b-VxJq-F9J_cYjQ2ZGY2Y2EtZmQ5Mi00ZGFhLTlkYjgtYjZiODIxODg1Nj Yz & hl = en

  
  http://docs.Google.com/leaf?ID=0b-VxJq-F9J_cOGExNzc0ZGItZjkzZS00MTkwLTk0MWQtYWZmODYyYTg2MD cy & hl = en

  
  http://docs.Google.com/leaf?ID=0b-VxJq-F9J_cZjI2MDFlNDQtYTJlYi00MWE5LWFhYTYtYTk5YjY0YmY5Ym Mw & hl = en

  
  http://docs.Google.com/leaf?ID=0b-VxJq-F9J_cNzlkYTYwNGYtMDBlYi00OGQ0LTgwMDItZTJiMGJjNDYyNj kw & hl = en

  I use sonys picture motion browser software to get the raw files off a Sony HD camera and on my hard drive (a separate physical disk from the operating system drive). I shoot the m2ts files in my project and as soon as I have a m2ts video in the timeline and play it, the sound will start but the video will lag, showing the same frame for 15-20 seconds before jumping awkwardly to another frame. If I let the video game latecomers worsens and the audio quality will start to deteriorate to the point where the voice sounds like they are fed through a pedal distortion guitar or something. I found that if I go to edit > Preferences > Audio hardware and set the default device back to 'First Pro ADM Sound' and then right towards "Lamda" ASIO it sort of "pop", the sound card and the clip will play smoothly for a few minutes until the video starts late and then the audio starts degrading to the distorted voice and I go 'pop' sound card again. Depending on the size of the project I am working on I can just to do this just once or twice during a shift of 8 hours and other projects (like today) I have to do every couple minutes.

  I don't know that I've left something so feel free to pull him out with additional information you need.

  Thanks in advance,

  Brandon

  Hi, Brandon.

  Just recently, I deal with a similar situation from my Panasonic AVCHD camera and the box that I had just did not have the ponies to treat. I have since bought a new box that is more reasonable, but I also put in place a step in my workflow.

  Because I'm only producing a standard def output, my first step is to convert the files .mts of my camera SD files uncompressed via a program that Panasonic provides for this purpose. This gives my release of performance system much more to work, because I'd rather have my box burn CPU cycles on reading, rendering, etc. to chip away the extra bandwidth that I don't need the HD source material.

  Initially, I found that my lower power box treat reading an AVCHD video line, but when I started layering multiple video tracks playback would stutter, cough and the direction the nearest pub. This technique made me all night with this box in anticipation of a new arrived, and of course puts less load on the new box as well.

  Hope this is useful and fun!

  Chris

• Why the page jump and readjust some sfter of time, I come back to a point, especially when you use Ebay?

  I don't know if it's a problem of Firefox or Ebay. I'm a volunteer salesman for an organism of charity and when I click on a list to check, and then return to the list click on the next page element readjusting upwards and I click on the wrong item. I notice it more on Ebay because I use so much and because it causes annoying interruptions, but it happened with other pages. Does anyone else have this problem? and if so, how do we stop it happening - it drives me crazy.

  Try to open links in a new tab with middle-click instead of in the current tab.
  
  Then you can close this tab to return to this page.

• Upgradinging HP m7760n and AMAP rescue equipment

  Hello
  66 I myself am education to be ready to upgrade this Vista Home premium 32-bit of m7760n Office of Vista Home Premium HP bought in 2007. 5 years for a new life for the parts expensive as MOBO, CPU and cards. It will keep my brain if not active body.

  It is a micro ATX put in place. The link is to provide details on this PC, if you need details to advise me on what material I can hold, including HD 2 X 250 G are OK. Have 2 TB ext). Consider adding boot SSD. Keep the DVD, the front I/O, the USB mouse /keyboard and memory with ports. No existing or future need for the games. Have 2 TB WD ext USB HD 3 closed for archiving.

  http://www.Newegg.com/product/product.aspx?item=N82E16883107286

  New needs are Win 7 Home Premium 64
  USB3 SATA III, 64 bit, RAID 1 to save the content that is not archived (existing 2 G HD @250), WIRELESS n, HDMI and a tuner betterTV receiving HD via air with a resolution of 1080 p channels. (My partner gets dibs first to reality TV). Is it good noon Betacam? for guitar and keyboard apps?

  I'm taking a class on the computer hardware. I have mine opened and am familiar with power SUPPLY and HD/DVD connected hook ups for power and SATA, also the headers that light up and connect to the front switch and map units A/V/USB/Memory, CMOS battery. Original 300W PSU died a week ago. Substitute 400W this week.

  Very grateful for the listed building strategy. I am an ecologist and hope that the Harbourfront units can be upgraded or maintained if necessary.
  Have the time, not money!

  Thank you

  Here are the specifications of your HP Pavilion Media Center m7760n desktop computer and its HP OEM ASUS P5LP - LE Leonite-GL8E mother.

  I think you are trying to push the machine beyond its useful limits. The motherboard has 3 slots PCI and 1 PCIe x 16 slot. 3 PCI slots are already occupied with the modem, b/g wireless and TV tuner cards. We can launch the modem and install a card USB 3 and SATA III. Mix the wireless b/g and install a b/g/n card. mix the TV tuner and install a new TV tuner that gets o-t-a HD install a graphics card with HDMI. So we are shy of slots... we can perhaps use a USB TV tuner or b/g/n wireless card to compensate for the lack of slots. I would get a PSU Corsair CX430 or CX500.

  You may lose the use of the HP software included with the upgrade to Windows 7.

  Let us know if you are still interested in tackling this project.

  Frank