Pen Active ThinkPad Yoga 14 (20FY) does not

Similar Questions

• ThinkPad Yoga 14 (20FY) - can not auto-rotation, Missing in Action Center - WIndows 10

  I just did a clean install of Windows on my Thinkpad Yoga 14 10. I tried to install all the drivers that I could. The only thing missing for the laptop, it's that I can't auto-rotation in tablet mode. Auto-rotation setting is missing from the center of the action and enter the display settings is not an option to allow auto-rotation. I also tried enabling the sensor, the sensor monitoring service and Service of sensor data with no luck. What are the conditions to get this working?

  Thank you!

  I finally got it to work. After some intense searching, I found the driver that I had to install. It ends up being the Intel integrated sensor Solution. Installation of the package has work as well as the addition of a "sensors" section in device with drivers HID sensor Manager.

  http://support.Lenovo.com/us/en/downloads/ds112057

  It's weird that the driver does not show in the ThinkPad Yoga 14 drivers page.

• Yoga Tablet 8 does not start

  I bought a Yoga Tablet 8 in November for my son-in-law for Christmas. He barely used it for 2 months and when it turns on it all that he gets is the Lenovo logo.

  I returned to the store who gave me the following Web sites to fix this.

  http://support.Lenovo.com/us/en/productsecurity/SUPERFISH

  http://support.Lenovo.com/us/en/productsecurity/superfishuninstall

  When I go to one of these sites my browser indicates that the page is not found.

  I have download the Lenovo Smart Assistant and installed on my laptop (Windows 8.1) then plugged the cable from the laptop to the tablet of Yoga. The Smart wizard tells me to confirm debugging USB has been activated (which is impossible because I can't start the Tablet) and does not recognize the tablet. On a few occasions, he does not recognize the Tablet but just says connection.

  Can anyone help?

  I took the tablet to the store and they have exchanged for a different tablet.

• ThinkPad X 1 carbon does not start

  A week ago, I received my Thinkpad X 1 carbon, and it works fine both batteries on power and the AC adapter all the time. This morning, I closed my laptop as usual (so it goes to sleep but is not closed) and taken to the class with me. When I tried to wake him up, however, nothing would work. It does not start with the captain is connected. I am sure that the battery is a battery and I don't want to void my warranty by fiddling with it.

  Does anyone know what I can do about this problem? It is the only computer I have in College and I take some computer classes, so my problem is quite urgent. I also can not easily get to one spot to fix since I'm in a fairly isolated town and I do not own a car.

  Also by reading the forums here, I feel that the Lenovo Helpline is just terrible. Is this true?

  Once again, thank you for any idea possible!

  ' afternoon.

  Welcome to the community.

  Sorry, you have any questions.

  Have you tried the hole "reset" on the bottom of the laptop? I believe that it is not marked, but you must use a paper clip to trigger the switch. I don't have a X1C, personally, so I can't describe further. I am mobile now, so have a limited research capacity, but if you search the forum for a post of Mark_Lenovo, in my opinion, there is a picture of him.

  What about communicating with the Service, I personally never had anything but good experiences. Please keep in mind that on the forums open like these, good rarely validated reports.

  HTH a little.

• Yoga farm 900s does not load

  Hello

  I have a new Lenovo Yoga 900 s. Everything worked fine until Windows has automatically installed upgrading birthday last night. Now, the battery won't charge. Fortunately, the laptop seems to run on a/c, given that the battery does not empty. But it does not load.

  I checked the power management settings, and I tried to uninstall the compatible Microsoft ACPI control method battery driver. But nothing has solved the problem.

  Please let me know if you have encountered this problem.

  Thank you.

  So, after an hour's conversation with Lenovo support, this is what finally worked.

  -Update the BIOS

  -Reinstall Lenovo settings app

  -Uninstall method battery driver control compatible ACPI Microsoft

  -Restart the computer

  Worth has shot if anyone has the same problem with their Yoga 900 series.

• ThinkPad W530 problem - Microphone does not work do not

  Hello

  My W530 microphone does not work. Whenever any problem try to use (Skype, Audacity), it still shows a quick activity (about 0.5 ms), always with the same- and nothing more, ever.

  I installed the drivers from Realtek and lenovo drivers, nothing works.

  I did said wha in all other forumes (sound-> manage audio devices), - disable listening, disable all the featues or activate, as well as Ministry of the highest available parameters. Nothing helps.

  This has been done since I bought this computer a month ago.

  OS: Windows 7 64-bit

  Help, please

  Hi again, matanm

  At this point, I would contact service customer in Israel, that I can't think of any other software issue which could be responsible for this. It is also reinforced by the fact that the microphone did not work since you bought the machine. The number of support for Israel is + 972-3-531-3900.

  Best,

  Adam

• Activation of the e-reader does not work

  I encountered problems in recent weeks by recognizing my e-reader in Windows 10. It was a common problem and is now resolved with a new Windows Update.

  However, now, I try to activate my e-reader, but he can't.  When I do this I get an error message like "Digital Editions has detected an anomaly on the activation server '." "  My Windows PC is activated.

  I also tried to delete the activation of my PC, but it does not work as well!

  A few weeks ago, I installed an SSD in my PC. May this be the cause of the problem?

  Who can help me?

  Windows:

  Close all applications.

  Click Start > run.

  Open, type regedit in the text box and press ENTER. The Registry Editor opens.

  In the left pane of the registry editor, locate the following registry key: HKEY_CURRENT_USER\Software\Adobe\Adept

  Select the key of the follower.

  Choose file > export.

  In the export registry file dialog box, select the branch selected under export range. Enter a name and location for the backup registry key, and then click Save.

  Right click on the key to the follower, and then choose Remove.

  In the dialog box confirm the key deletion, click OK.

  Close the registry editor.

  Open Adobe Digital Editions and reauthorize.

  Macintosh:

  exit the Adobe Digital Editions software.

  Navigate to / Users / / Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash.

  If you use 10.7, see https://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html

  Open Adobe Digital Editions and reauthorize.

• ThinkPad Edge 13 WiFi does not work

  Hello

  I've updated my Thinkpad with windows 8.1. But the wifi driver does not work correctly. After the installation, the device has been diasabled with code 10. I looked for a new driver and found one from Realtek to win 8. After this installation and restarting, the wifi works fine. Restarting the laptop again once the device has been disabled again. I have tried many different drivers - it's always the same: after the first installation and reboot it works, after the second start, the device is turned off again.

  Someone knows how to fix this?

  Thanks in advance!

  Kojak

  Thanks for the reply. I found a solution - it's a windows problem 8.1:

  http://ishamsaid.Tumblr.com/post/54179009758/Atheros-WIFI-problem-in-Windows-8-1

  Concerning

  Kojak

• Active AF:commandLink: hover & CSS does not work

  Hello
  
  I use JDeveloper 11.1.1.6
  
  My script is required to change the color in < af:commandLink > at this time active. I tried CSS styles below,
  
  + af | commandLink: active {+
  background-color: #7FFFD4.
  +}+
  
  + af | commandLink: hover {+
  background-color: #FFCCFF;
  +}+
  
  But it does not work. I followed this URL http://jdevadf.oracle.com/adf-richclient-demo/faces/components/skinningKeys/commandLink.jspx .

  Hi David,

  Looking for probably

  af|commandLink:link:active
  {
    color: Aqua;
  }
  

  Here are the other selectors

  af|commandLink:active
  af|commandLink:busy
  af|commandLink:disabled
  af|commandLink:hover
  af|commandLink:inline-selectable
  af|commandLink:inline-selected
  af|commandLink:link:active
  af|commandLink:visited
  

  See here: http://jdevadf.oracle.com/adf-richclient-demo/docs/skin-selectors.html

  Kind regards

  Lalit

• copy of database active errors includes: controlfile rman_04006 does not.

  I try to create active eve of primary school by rman duplicate database.
  
  However, I got following error when it tried to allocate auxiliary channel:
  output channel: prmy9
  output channel: prmy10
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure to allocate command at 27/07/2012 13:20:39
  RMAN-06403: could not get a fully authorized session
  RMAN-04006: auxiliary database error: ORA-01034: ORACLE is not available
  ORA-27101: shared memory realm does not exist
  Linux-x86_64 error: 2: no such file or directory
  
  RMAN > * end-of-file *.
  
  
  My init file took out controlfile, and alert log shows:
  ORA-00210: could not open the specified control file
  ORA-00202: control file: ' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/cntrlremeprdl.dbf'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  
  There is no such controlfile in high places as controlfile is not created.
  
  Init file is like this:
  Using parameters in Server pfile /u01/app/oracle/product/11.2.0/dbhome_1/dbs/initprdl.ora-side
  Parameters of the system with default values:
  process = 900
  sessions = 1376
  SPFile = "+ DAT/prdl/spfileprdl.ora".
  memory_target = 44416M
  db_file_name_convert = "+ DAT".
  db_file_name_convert = "+ DAT".
  log_file_name_convert = "+ DAT".
  log_file_name_convert = "+ DAT".
  log_file_name_convert = "+ FRA".
  log_file_name_convert = "+ FRA".
  DB_BLOCK_SIZE = 8192
  compatible = "11.2.0.0.0."
  Log_archive_dest_1 = 'LOCATION is USE_DB_RECOVERY_FILE_DEST ".
  log_archive_format = "prdl_%t_%s_%r.dbf."
  log_archive_max_processes = 10
  db_create_file_dest = '+ DAT '.
  db_create_online_log_dest_1 = "+ DAT".
  db_recovery_file_dest = '+ FRA.
  db_recovery_file_dest_size = 982915M
  standby_file_management = 'AUTO '.
  undo_tablespace = 'UNDOTBS1.
  Remote_login_passwordfile = "EXCLUSIVE."
  
  
  This init paraemter is followed 11g MAA rapic Eve as follows. After the double, I'll add all these parameters of dg.
  
  How should I proceed from here?

  Ok

  SID_LIST_LISTENER =
   (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME=prdl_DGMGRL)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (SID_NAME = prdl)
   )
  )
  

  Would increase to

  SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
        (global_dbname = prdl_DGMGRL)
        (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
        (sid_name = prdl)
        )
        (SID_DESC =
        (global_dbname = prdl)
        (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
        (sid_name = prdl)
  )
  

  The additional part: (wait for global_dbname prdl.hostname)

  (SID_DESC =
  (global_dbname = prdl)
  (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
  (sid_name = prdl)
  

  You will have a static entry for RMAN duplicate...

  Another example

  SID_LIST_LISTENER =
     (SID_LIST =
         (SID_DESC =
         (SID_NAME = PLSExtProc)
         (ORACLE_HOME = /u01/app/oracle/product/11.2.0.2)
         (PROGRAM = extproc)
       )
         (SID_DESC =
         (global_dbname = RECLONE.hostname)
         (ORACLE_HOME = /u01/app/oracle/product/11.2.0.2)
         (sid_name = RECLONE)
     )
  )
  

  H3. Avoid delays

  Add them to both servers

  In listener.ora
  INBOUND_CONNECT_TIMEOUT_ = 120

  In sqlnet.ora
  SQLNET. INBOUND_CONNECT_TIMEOUT = 120

  Stop and start the listener

  Use

  lsnrctl status (to find a static entry)

  Best regards

  mseberg

• Since activation apple CarPlay, my iPhone does not connect to my Bluetooth infotainment system

  I have recently taken delivery of a VW Tiguan MkII 2016 and could easily match my 6 s iPhone with it. Now, however, I created CarPlay Apple and VW car-net connect my iPhone via USB. Now my iPhone is no longer connect via bluetooth when not plugged into the USB port. It seems that I can now use only my phone by CarPlay which I do not plan to use whenever I drive the car. Is there a solution to this?

  Hi biker.

  I understand that as you have activated the Carplay, your iPhone will not connect to your car stereo via bluetooth. You can try to disable the Carplay on the device, and then test the bluetooth connection. Because you are trying to connect via clips and wireless at the same time, this can cause some problems. Using one or the other should solve this problem.

  Please use the Apple Support communities to post your question. Good day.

• Keyboard yoga 900 arise does not in Tablet Mode

  I've had settings and devices and clicked on the box I was supposed to click on.

  In TABLET mode, when I touch the Google to enter text inside bar, the keyboard does not appear, so I have to manually launch the keyboard then when I finished I have to manually close the keyboard because there is no button 'DONE' or 'GO' or 'ENTER' on the keyboard in tablet mode.

  Thank you for your suggestions.

  I'm afraid that the resolution of this problem lies with Google. The Chrome browser does not trigger local keyboard in tablet mode. It is a desktop application that does not use the API of Windows 10 news for this feature. Personally, I doubt that Google will rush to remedy this.

  As you have discovered, Microsoft Edge brings up the local keyboard in tablet mode. IE11 goes.

• ThinkPad 8 touch screen does not

  I used the windows built-in 8.1 touchscreen calibration tool and now the touch screen no longer works.

  I managed to get into the Setup of the tablet. He works the screen.

  It's so 'only' a Windows problem, but as I can not connect any more I can't reset Windows.

  Attach a keyboard via microUSB3.0 to USB3.0 does not work either, so I couldn't use F8.

  Could someone help me please!

  Micro USB 2.0 to USB 2.0 works

• Yoga charge 13 does not?

  I take my Yoga to work every day and the night is on current alternative while I'm asleep for at least 6 hours. Recently I have noticed when I get to work the battery indicates that it is by about 58% charged.

  1. when I got to the bed I just close the lid and I won't reopen it until I get to work, I guess it happens mode 'sleep' and at least even if it did not somehow so it should completely load while on the power for 6 hours, I would think.

  2 here is the recent changes to be considered; I've changed the 'save energy' power options and I could have sworn that I changed something I chose the battery on something else, but I see that when I'm looking at it now. I also installed a 1.35v new 8gig of ram stick. I am not sure that this started before or after one of these changes, I only noticed in the last week or two, and after these changes it's not directly after.

  Does anyone know why this might be, is - it related to this health battery setting I can't move?

  Thank you

  This occurs when you go in the energy management software Lenovo (from the bottom right near the clock on the desktop) and select the battery instead of maximum battery life.

  Optimized battery health, he stops battery to about 60% of its capacity to reduce the degradation of the battery.

• ThinkPad 8 - Windows store does not work

  Hi, I just bught a 8 ThinkPad with windows 8.1, it received last week

  I only downloaded a few apps in the store (basically some pdf readers to see the best of them) and used a disc

  About 2 days only use, the store began refusing to download any application, says that my internet is not fast enough. But I have a 50mbps internet (already checked a few websites and the acual speed is about 40mbps, more then enough apps to download)

  So I heard that it could be a problem with windows, maybe I have to download updates. The thing is when I tried to access updates (both parameters in the Start button) and the control panel it just won't load. In Start button it just guard the thought and in the control panel, it feezes. Tried to download the updates from lenovo app and the solution I found on the internet, nothing works

  Bluetooth, too, cannot communicate with my laptop (G400s, also Lenovo, they can find each other, but can not send files). I don't know if the problems may be related, otherwise, I can work this one later.

  Everything else works perfectly... internet is great, transferred some (larger) books with a player... fast enough and beautiful display etc. Only these problems

  Can someone give me some advice what I am doing wrong? Sounds like a software problem

  HA he stares at me

  I don't know if I had not noticed or if its new (I would say 1st choice) but there is a BIOS update in those "System update" option by lenovo... installed and everything went back to normal

  If anyone has this problem, try this