Pen pro surface 3 does not work.
hey y'all, my new Surface Pro 3 pen does not write, right-click or erase. I changed the batteries AAAA twice to nothing does not. Any ideas on what's going on? Thanks, Gianni
I suggest to follow the steps in the link below and check if it helps you.
Troubleshoot the Pen Surface
If you still have problems I suggest you contact the office of the support on the information provided below Surface.
Contact Office of the response of Microsoft for the Surface
Email us if you have any other issues related to Windows.
I try to use a pro 7 product key offical windows to activate windows 10 pro, but it does not work?
If I search on possible improvements, he says it should work?
Try the chat support:
Windows PC upgrade to 10. Try to install the first Pro CS5. Does not work.
Download the following messages: Exit Code: 7 please see the faults and warnings below for troubleshooting. For example, ERROR: DW050... WARNING: DW036, DW066...
-0 fatal Error (s), 82 (s), 124 warning (s)
Do you have other Adobe applications installed on your computer?
Navigate to C: > Program Files > Adobe.
Open the Adobe folder and check if the Adobe Premiere pro CS5 folder is created with files stay inside?
Let us know.
As System File Checker run command once and see if \any system files are corrupt. As you had upgraded to Windows 10 we will check the system files once. Later we can try to provide full permissions for the required records.
Free trial of Adobe Pro DC installation does not work why? The installation proceeds very slowly and simply makes anywhere between 11% and 40% before I get either a general "Error" message or one that says WebGet failed.
I use Mac Yosemite and download of Firefox.
You have downloaded the installer at the bottom of the link?
Another problem with this laptop Satellite A30
The built-in modem does not work.
* Explanation: *.
The driver is correct and downloaded from the Toshiba support site.
The modem is identified as "Toshiba software modem amr" and is installed on com3 port.
When I click on "diagnosis" and "ask modem" (right labels can be different, since my is an Italian win xp, I just translated the Italian labels), a window pops up saying: it is impossible to open the door (port), the modem is connected to.
I tried to change the com port of the modem to different numbers, but the problem is the same.
I don't know if the modem is a real map connected somehow to the main Board or is built right on the main map. It would be the first case, I may change see ad. BTW, the mini slot pci is already occupied by the gigabyte of Wi - Fi, so the modem must be elsewhere.
This is strange, since I've done at least 2 other win xp pro on this machine facilities, always download and install the appropriate drivers, and the modem has never worked.
Have you installed the SP3 Windows XP Home edition, then the drivers or SP1 and later updated to level to the SP3 version?
> It's strange, because I did it at least 2 other facilities on this machine pro win xp
What other facilities?
Hi all that I need help urgent because it drives me crazy. First of all, I use XP PRO. My laptop is fairly new, only around the age of 4 months, I had no problem with it at all. I formatted my laptop yesterday and reinstalled all the drivers that I downloaded here:
and everything works fine except the touchpad. I have already installed shared, utilitarian toggle the touchpad Module and I have the latest BIOS installed and reset all default settings and I made sure that the touchpad is enabled in the BIOS, but also pressing FN + F9 to enable during Windows.
I installed the latest touchpad driver Synpatics I downloaded from the homepage of Synaptics. But for some reason any, that it does not work, I don't know what is the problem here. My touchpad worked before I formatted my laptop, it worked fine and has never had any problems. Will you please tell me what is wrong because I need to use my touchpad sometimes as well, so I can't use a mouse all the time.
> I installed the latest Synaptics touchpad driver that I downloaded from the home page of Synaptics
I think that you question refers simply to the driver for the touchpad that is missing or incorrect.
I put t know how it works on Toshiba notebook Australian, but the Toshiba European Satellite Pro L300 units needs touchpad different drivers. some use the Toshiba touchpad driver and some units need a driver for the Synaptics touchpad.
In your case, I recommend this controlled again.
By the way; My touchpad is always disabled so that en external mouse is connected.
It is parameters that control it. Please check in your touchpad properties too!
I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
Click Troubleshoot to start the troubleshooter for this device.
However, under Driver Details is said:
I extracted the zip file in my home directory of c:\downloads\infrared.
whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.
Thanks in advance for any help.
If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.
I had this problem for a while, and I was wondering if anyone had any suggestions to solve this problem.
I have more or less of work Satellite Pro 4270 (4200 Series) computer laptop with XP on it.
The USB port does not work. I don't know why it does not work. I tried to replace the USB module on the motherboard that has not worked. I've updated the BIOS to the latest version, has not functioned. Removed and reinstalled the drivers in XP, not worked. I'm out of ideas.
IrDA works very well.
Some suggestions please. Thank you
I understand, were you solder the module USB motherboard and then solder another module?
I mean, what have you done with the module USB, replacing? Sorry, I don't remember exactly how the USB module is connected to my mobo SP4270 seen last about the half a year ago... If the welding, I don't wonder the problem... but if not, there may be a solution...
I live in Italy and last Sunday (26 January) my excited PRO Tablet (model AT10LE - A - 10 H) received version Android 4.3.201121220.35.
After restart my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".
My sim card is ok. I used this sim card before the system update and I don't have a problem with Android 4.2.2.
Please help me.
> After reboot my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".
Go to mobile network settings and search again for the 3G network.
I had a similar problem with my Android Smartphone and my o2 provider
I started to search for new, so I chose the O2 again and then I could solve the problem.
In the case where this does not work for you, recommend you to reset the default Tablet (factory settings)
I have a problem with my bluetooth device. I have Toshiba Satellite Pro U400.
My previous operating system was Windows Vista business and I just replace it with Windows 7.
Since I installed it my device Bluetooth does not work anymore.
I have had no problems with it with my previous Windows.
Now, the following messages will appear: "Bluetooth stack for windows by Toshiba is incompatible with this version of windows" I have windows 7 Professional.
I tried to update the drivers, but I was told that I have the best and latest drivers.
Can someone help me?
Seems that you are still using an old battery Bluetooth.
You this should remove the system and need to install a new one which you can download here:
You can find the pile of BT for Win 7 32 bit and 64 bit version
Has anyone tried connect a HDMI microphone on their place of dell 11 7140 pro after windows 10 upgrade? Mine does not work after the upgrade, but the HDMI from the dock works.
I have thus display driver problems on 10 to win.
For me, the micro HDMI port works fine. I use an active adapter, so that could make a difference.
The HDMI on the dock works well, but only if I directly connect to an HDMI display. If I try to use a passive DVI adapter, then the external screen is not recognized. In addition, the DisplayPort on the wharf is also unnecessary, regardless of the type of cable or attached monitor.
I encounter this problem after performing a new installation of Win 10, using the brand Dell drivers and latest drivers Intel installed by Windows update.
It is certainly a driver problem Win 10 because everything works fine if I boot the Tablet under Linux using a USB key.
Hello! There is a problem with my Dell place Pro 11. The Tablet does not work in conjunction with a docking station with a keyboard with battery docking station. The problem with the docking station, is only the work of power and audio connector. More is running, no ports (HDMI, USB, LAN). The problem with the keyboard, the touchpad and keyboard do not work. Once the battery is connected. Windows 8/1 Pro 64 bit is installed, the latest drivers and BIOS (A15). Without docking station and keyboard shelf works well. USB and HDMI ports on the tablet work well.
What can I do?
same problem here. Both my dock and travel keyboard no longer works. Only my dock workload but not USB, etc.
I've updated my 7130 windows 10 with the latest bios drivers but no luck.
Time for dell start with patches!
Pro tools Windows 7!
Pro tools 8 downloaded from disk does not work. Download just digidesgn black screen with options of file etc to the upper left corner.
Hello Bakk-24,Thank you for your message. After a little research, I found that Pro Tools 8 is not completely compatible with Windows 7. You can check compatibility with the link below.See you soon
Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
Using the dynamic link feature in the still I am trying to import some sequences within a project of first Pro CC 2015.3.
A window opens and it begins to examine the record of the project for the sequences and a little yellow progress bar starts, gets a small path along the bar and stops permanently.
I can't figure a way around this except sequences to export video files to import then which is the long way around?
Someone at - it somehow around him?
Dynamic Link does not work between the different versions, you must export a video DVD or BluRay proper on PProCC and then import the files in yet for the creation of
After that restore disks for installing a new HD and use and to update XP sp2, the Wireless does not work and if the card is installed XP hangs then works in fits and starts. If the card not in place, not bad at all.
Booting from a Linux CD, the card works perfectly! I assume that the driver is the problem. The wireless card is the original, an Agere MPC13A-20/R, with Toshiba p/n PA317U-1MPC.
I have found some drivers Agere, but am not sure
(1) if they are correct
(2) how to install since the machine works in a way limited with the card in place.
I checked the page of the pilot and the only available for Windows XP WLan driver is the driver of v.1.11.108 Agere.
(1) just try to install this driver. If the driver is not correct or is not compatible, then windows will not install the driver and you will receive a notification. You just have to try
(2) generally you may reinstall the driver from the Device Manager. Open network controller tree, and then you can reinstall the driver.
But this is only possible if the windows started successfully
PS: Have you checked the information of Microsoft Windows XP SP2 update on the page of the Toshiba driver.
I discovered that you need to update several utilities if you have installed SP2 on this laptop.
Maybe you are looking for
Hello Actally, I develop my stuff under XP. Everything works fine. Were a few machines running Windows7. The machines are broken in the custom user interface created with .net during execution of the models modelsupport2.dll GetReportBody_CImplementa
I discovered a recent problem where I've got, let's say, 4 attachments to an email I want to save in 'My Documents'. I click on file, save attachments, all attachments - scroll down to "My Documents", which shows all the files, but shows not all of
I tried to install the updates and the computer will restart itself, try to install them and then say that the installation has failed. No error message and none of the solutions proposed in the FAQs apply to my situation. My computer did this for se
I am running XP, DM4.5 with a BB8310. I am trying to set up outlook express on the BB calendar. I'm going to 'configure sync on my office program settings' choose "calendar" and then select microsoft outlook (outlook express is not an option in the l
Hello colleagues!VMware Horizon Client 3.4.0 build-2769709VMware View 6.1.1 construction-2769403VMware vSphere 6.0.0 2776511That's what's wrong: used SecurityServer and connecting to the server. External connection - via a router. When it is connecte