Pen Tool not work - Adobe first CC

Similar Questions

• Pen pressure not working not properly!

  Just installed Flash CC and I tried using the Brush tool and the pressure of the pen is not working properly! I have a Wacom Cintiq 24HD, I use the pressure of the pen and tilt and there is a serious gap between when I start drawing and Flash start preview what I paint (about two seconds). Once Flash starts preview, the line that I drew jumps from where I starts at the current position of the cursor without registering any curve that I've drawn beforehand. It's frustrating to seriously! Does anyone have the same problem?

  Hi Jackimo,

  The problem is reported and we followed. We will try to get it resolved as soon as possible. You can take a look at the thread for details:http://forums.adobe.com/message/5454376#5454376.

  Sangeeta-

• Portege M400: click right button on the pen does not work

  Hello

  I can't button right-click on the barrel of the pen to work with my new Portege M400 tablet PC. I tried with the option 'Use the stylus buton click-right' in the 'Pen settings' tab 'settings in Tablet and stylus' dialog checked and unchecked, but none worked.

  Is the stylus defective, or worse still the computer? Or can anyone suggest how to operate?

  Thank you

  Toby

  PS: "pen" should be "nep" reversed in option, tab and dialog names above, but the silent filter profanity does not accept the word "nep" (reverse).

  Hello

  You have this problem since the first day? Please remember that the pen is not in a very long distance from the screen. As you know if the distance is too great the pen will not work as usual.

• Photoshop CS4 Pen tool slider works not properly?

  I worked with Photoshop for over 10 years. Tool pen of CS4 will add a point during the click on tool of several pixels below the bottom of the pen like that I always saw where it adds a point to the click right at the end of the upper part of the pen tool.

  I entered in preferences, cursors and checked and tried all the combinations of options "Standard cursors" and 'Painting cursors' nothing works. The point on which he places when I click will be always shifted the current tool.

  What gives?

  It looks like you created the document in view full screen click using the F key and rear cycle it will go away.

• Source and program monitor buttons do not work in first Pro CC for me

  With the help of first Pro CC for the first time since the last update. When you use my MacBook Pro to change keys to play, mark, mark etc. do not respond when you press on using trackpad. Keyboard shortcuts do not work. Here is a screenshot of my screen and if anyone has any ideas based on what is stated at the bottom of my files on the left. Here are a few features on my mac:

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 3

  Processor name: Intel Core i7

  Processor speed: 2.3 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 16 GB

  Boot ROM version: MBP112.0138.B02

  Version of the SCM (System): 2.19f3

  NVIDIA GeForce GT 750M:

  Chipset model: NVIDIA GeForce GT 750 M

  Type: GPU

  Bus: PCIe

  The PCIe track width: x 8

  VRAM (Total): 2048 MB

  Provider: NVIDIA (0x10de)

  Device ID: 0x0fe9

  Revision ID: 0x00a2

  ROM revision: 3765

  gMux Version: 4.0.8 [3.2.8]

  Exhibition:

  Color LCD:

  Display type: LCD retina

  Resolution: 2880 x 1800

  Retina: Yes

  Per pixel: 32-bit color (ARGB8888)

  Main screen: Yes

  Mirror: Off

  Online: Yes

  Integrated: Yes

  Intel Pro of Iris:

  Chipset model: Iris Pro Intel

  Type: GPU

  Bus: integrated

  VRAM (dynamic, Max): 1536 MB

  Seller: Intel (0 x 8086)

  Device ID: 0x0d26

  Revision ID: 0 x 0008

  gMux Version: 4.0.8 [3.2.8]

  Hello

  Have you tried to reset the preferences?

  You can also try to rename the Adobe folder in the Documents to OldAdobe, but this will make you lose workspaces shortcuts and personalized keyboard.

  Let me know if this helps.

  Thank you

  Regalo

• Toshiba Digitizer Pen does not work on Portege Z10T-A

  I have a Portege Z10T.-a.

  I bought new Toshiba Digitizer Pen PA5133U-1EUC.

  The link below, this pen is compatiable on my laptop. But it does not work. Y at - it no adjustment or the driver of this pen?

  http://www.Toshiba.com/us/accessorie...s/PA5133U-1EUC

  I think you should check if the device supports the digitizer and if so, you will need to calibrate the pen and touch settings.

  For this I recommend that you review the Microsoft FAQ on pen and touch settings:
  http://Windows.Microsoft.com/en-pH/w...Sked-questions

• Portege M200 - pen does not work with the screen

  So I bought a pen for M200 and reinstalled the operating system.
  Now I M200 with Windows XP Tablet PC edition, a utility Screen Rotation and usefulness of the stylus button. Now Pen buttons work fine with my new pen, but the screen itself does not work. I mean, the stylus does not work with the screen.

  I have a mouse, and another menu pointing devices in Device Manager and it includes the following submenus:

  HID compatible mouse (I use the random DELL mouse)
  Mouse PS/2 Cimpatible (?)
  --------

  I think there must be something else...
  Please tell me, forum, what drivers should I download to get the pen to work?

  Stand by. Are you using the original image of recovery Toshiba (operating system) or you have installed your version?

• Revolve 810 G2 Executive pen does not work

  Hello

  Revolve 810 G2 / Windows 8.1, all updates (Microsoft and HP) are carried out.

  Pen is not recognized. I can't find any driver associated with feather on the HP page turning G2.

  What I've read, the Pen 'pen tablet HP Executive R1' reference must match a G1 not turn a G2.

  Is this correct?

  Although this pen would work with a G2 810 or pen is dead on arrival, or a driver issue?

  I read a lot about the customers disappointed on the pen of the revolution, when they compare themselves to the generation 2740.

  G2 solved this?

  Thanks for your help,

  Jean-Jacques

  Please see the troubleshooting of pen and calibration

  http://www.HP.com/United-States/HP-Executive-tablet-pen-whitepaper.PDF

  Replace the battery

  For the G2 to test the new PEN

  HP Executive Tablet Pen G2

  "Write messages and notes in your own handwriting directly on your HP EliteBook turn 810 G2 [1] screen.

  http://h30094.www3.HP.com/product.aspx?SKU=10754734&mfg_part=F3G73AA&pagemode=CA

• The cutting tool not working anymore... :-(__It was my favorite thing...

  For some reason my Snipping Tool no longer works. I clicked and 10 or 20 seconds, and I get the error: the cutting tool does not work on your computer right now. Restart your computer, and then try again. If the problem persists, contact your system administrator.

  I did a scan of the disc, and the Tablet PC optional components meet. (Enabled).

  This is a dell computer that came preloaded, so I don't think that I can recreate the cutting tool of a disc. ALSO... mysteriously, my tool of Windows Live Mail has decided to not SEND email at the same time.

  I have chased google and hope you can help. It's me MISSING.

  Roxie 1117

  Suggestions:

  1. If it is possible: to do a system restore. Choose the date free snipping worked as your restore point.

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  2. start > Search box, type system32 (that's a Word) > Enter > system32-box right, superior search window type SnippingTool.exe (that's a word too).
  Don't you see that SnippingTool.exe appears?
  If so, click it or PIN to the Start Menu or the desktop (create shortcut).

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• The Wacom Intuos4 pen pressure not working?

  Just installed Photoshop on Windows 8.1, Intel i7, graphic IrisPro CC.

  And then installed the Wacom Intuos4 driver from here: http://us.Wacom.com/en/support/legacy-drivers/

  Reset my computer, open Photoshop and my pressure of the stylus does not work!

  So I opened the menu "window-> brush" go to the tab "dynamically" and where it says "Control = pen pressure"to the left, he has an alert symbol.

  Looked on the forums, found no solutions.

  I also installed MyPaint and my pen pressure works on this Open Source application... so I don't understand why his would not work with Photoshop...

  It is more of a bug report, if anything, unless there is a known solution?

  Awesome! Found a solution: http://gunnergurl.deviantart.com/art/Under-Pressure-258720857

  Basically, add Photoshop as an application to the feather and the button available in the Wacom Control Panel.

• Adobe Photoshop Elements 9 - text tool not working - no cursor flicker

  Hello

  I'm not able to add text to pictures.  I can click on the text tool and drag to insert a box, but no blinking cursor appears.  If I type my text, for example 'Beka', the layer is given this name, but the text does not appear.  So far I have tried:

  • make the text larger or smaller (to make sure it wasn't just a problem whether at small/large to see)
  • change the color of the text to ensure that it didn't mix with the background

  Any ideas would be appreciated.

  Lori

  Try to reset the text tool by clicking on the small arrow facing downwards and select Reset Tool.

  

• Digitizer Pen will not work

  Product number: 20c1000vuk

  It is a renovated model of laptopsdirect

  It did not come with a pen and the one I ordered didn't work right out of the box.

  This tablet is not compatible? Or what?

  Not only that, but if you look to the top of the model 20C1000VUK in the PSREF Lenovo's document, it states quite clearly that he doesn't have an active digitizer.

  http://www.Lenovo.com/PSREF/PDF/Think_Tablet&Convertible_WE.PDF

• Why is it not my Adobe first Elements 9 video full screen?

  Okay, so I turned my video in full screen HD, and when I export, the quality is poor and he is half of the screen. I had no idea when I started of what settings choose, this is probably the problem. But now, deseperately I hope someone tells me there is something to do, because I have worked on this project for 3 years now and I can't start over again.

  The project settings is DV NTSC.

  The videos that I use are in. MTS and. MOV

  I don't know what information you need, but do not hesitate to ask.

  MrJoshameeGibbs

  MrJoshameeGibbs

  Officially you can not change the settings for this project when it was established. Of all that has been written, you seem to have the project settings for both 16:9 4:3 source files.

  The hope would be to amend the preset to NTSC DV Standard NTSC DV widescreen or another preset 16:9 project.

  But I wrote it on a way to make this change in some cases when editing the document in Notepad the saved closed Premiere Elements project file (.prel).

  But this document in Notepad for editing can be difficult if you have not done before.

  First Elements ATR troubleshooting: PE11: changing settings of project without starting a new project

  Note: NTSC DV Standard and NTSC DV widescreen have the same image size 720 x 480. The difference is that the screen has a 16:9 flag that extends from 872 x 480 to display video after encoding. You can tell them apart in the properties - the standard has a pixel aspect ratio = 0.9091 and the big screen has a pixel aspect ratio = 1.2121.

  
  

  As a desperate gesture, I wonder if we could take the export of 16:9 (which features with black borders) in a project of Premiere Elements for NTSC DV widescreen. Scale and the installation video then just to fill space in Edit mode monitor. Then export them with a choice of 16:9 export. This may seem a bit zoomed in, but it could be a way to save what you have.

  Consider, let me know if you understand the comments. I'm going to re - write here where necessary.

  Thank you.

  RTA

• Variable width tool not work - cannot adjust the position of the points of width - Illustrator CS6

  Hello

  I'm having a Mare with variable width tool in Illustrator CS6...

  When I add points of variable width for a stroke I can't move the position of the decimal point of width. I watched several videos showing the width point slide seamlessly along the racing line - but I am unable to do this in my session of Illustrator!

  However, if I move the cursor width-tool on the end of the race only point, a (~) symbol will appear and I am able to slide that point only along the race. But this isn't a suitable way for me to realize the effects I'm trying since.

  I would be very grateful of any advice or experience with this issue.

  Thank you very much!

  When you create a new point width, you can move it in the direction of width but does not change its position. Howeven after the point is created, you can move your cursor near the point which is along the central axis of the race, to move along the racing line.

  You can also watch http://tv.adobe.com/watch/csinsider-design/illustrator-a-closer-look-at-the-variable-width - tool-for-illustration /

  Let me know this was useful.

• Acrobat Pro XI Installation does not work - Adobe CC

  The school that I administer recently bought more licensing Adobe CC, which includes Adobe Acrobat Pro XI.

  I used the creative cloud Packager to create installers for Acrobat XI on its own and as part of the full suite of applications.

  Everything installs fine except for Acrobat XI, there is no error during installation, however, the program is not visible in the Start Menu or Program Files, and if I look in programs and features, it is there, but with a generic white icon.

  I have redownloaded the software several times and tried to install it on multiple computers running Windows 7 32-bit Ent, including imaging re one PC with a new installation of Windows to see if it works.

  Just a parenthesis, please back up your installation files and other CD or disk backup for the future. Looks like a txt file, discuss the installation process would be too good.