people getting an e-mail address/blackberryid during the installation of your application.

Similar Questions

• Anyone know what to do if you get an error of update (U44M1I200) during the installation?

  Anyone know what to do if you get an error of update (U44M1I200) during the installation?

  U44... Update error http://forums.adobe.com/thread/1289956 can help

• Impossible to get Windows Vista Mail to work since the installation of FireFox

  In recent weeks, been unable to access the Internet or use any messaging service using IE8. Internet Explorer opens not - except in safe mode with network. I spent several hours to solve this problem without success. Then as a last resort, I downloaded and installed Firefox and in normal mode the page Firefox came and I have full access to the Internet and Microsoft Hotmail - however I can't get Windows Vista Mail to work.

  WMUtil is very easy to perform and can fix things.  Especially if you got rid of McAfee.  You may still need to remove your e-mail account and then add again, but it's also easy to do.

  Many people find Thunderbird much more preferable to alternatives to Microsoft.

  Steve

• An error occurred during the installation of Adobe AIR 3. Installation may not be allowed by your administrator. Please contact your administrator.

  I shows that I have air adobe like installation, but I tried to upgrade to adobe 3. I get this message: an error occurred during the installation of Adobe AIR. Installation may not be allowed by your administrator. Please contact your administrator. I am the administrator. How can I solve this problem? Thank you

  Hello

  1. have you made recent changes to your system?

  See the link below and check if it helps.

  http://kb2.Adobe.com/CPS/403/kb403150.html

  It will be useful.

• Good day when you open the AppStore I get at e-mail address by default

  When the AppStore opening I get an e-mail address by default what wrong pair and impossible to replace operating system

  any ideas?

  Thank you

  Whose address email or Apple ID it belongs?  Do you know?

• Get the error during the installation of the regional coordination unit

  Hello
  I am facing the error during the installation of the RCU below. We gave the user sys and the DDT that works very well DOSPROMPT.the even when I give the configuration during the installation of the remote, I get the below error. Can someone help me with this problem.
  Thanks in advance...
  
  2012-10-02 22:52:58.645 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: SYSDBA, connectString: (description = (address = (host = localhost)(protocol=tcp) (port = 1521)) (connect_data = (service_name = ORCL) (server = dedicated)))
  2012-10-02 22:52:58.730 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: unable to connect to database: name of user and password invalid.
  Please enter the name of user and password valid
  2012-10-02 22:52:58.730 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: SQLFatalErrorException:
  oracle.sysman.assistants.common.dbutil.SQLFatalErrorException: name of user and password invalid.
  Please enter the name of user and password valid
  at oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine.connect(JDBCEngine.java:585)
  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:358)
  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:253)
  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.isConnectionStepValidated(StepValidator.java:1352)
  at oracle.sysman.assistants.rcu.ui.pages.DBConnectionPage.updateModel(DBConnectionPage.java:552)
  at oracle.sysman.assistants.common.wizard.WizardPageExt.wizardValidatePage(WizardPageExt.java:166)
  at oracle.bali.ewt.wizard.WizardPage.processWizardValidateEvent(WizardPage.java:710)
  at oracle.bali.ewt.wizard.WizardPage.validatePage(WizardPage.java:680)
  at oracle.bali.ewt.wizard.BaseWizard.validateSelectedPage(BaseWizard.java:2367)
  at oracle.bali.ewt.wizard.BaseWizard._validatePage(BaseWizard.java:3072)
  at oracle.bali.ewt.wizard.BaseWizard.doNext(BaseWizard.java:2152)
  at oracle.bali.ewt.wizard.dWizard.DWizard.doNext(DWizard.java:405)
  at oracle.sysman.assistants.common.wizard.WizardExt.doNext(WizardExt.java:261)
  to oracle.bali.ewt.wizard.BaseWizard$ Action$ 1.run(BaseWizard.java:3944)
  at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
  at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:641)
  to java.awt.EventQueue.access$ 000 (EventQueue.java:84)
  in java.awt.EventQueue$ 1.run(EventQueue.java:602)
  in java.awt.EventQueue$ 1.run(EventQueue.java:600)
  at java.security.AccessController.doPrivileged (Native Method)
  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)
  at java.awt.EventQueue.dispatchEvent(EventQueue.java:611)
  at oracle.sysman.assistants.common.util.EventPopUp.dispatchEvent(EventPopUp.java:94)
  at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
  at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

  3rd error is known, one can ignore it.

  Try it with the user of the system, I thought I told you that.
  This should work.

  Score pls help if

• Why do I get the message 'a network error occurred during the processing of your order'?  I was able to print an album without problem about a month ago

  I am trying to print a photo book, but get the message "a network error occurred during the processing of your order.  Please check your network connection and try again.  I had no problem with the printing of a book about a month ago.

  Start in Safe Mode, Mac OS x: Safe Mode bootand try to order from there.

  Don't forget to check out the book before ordering this Apple; Get an overview of a project on paper in Photos, iPhoto or Aperture to avoid problems - Apple Support. Save the PDF to be compared with the printed version when coming out.

  

• During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT.

  Hello

  During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.

  Problem: I get the cannot install because it is a GPT partition.

  Y at - there no way to make these 2 USB sticks work?

  Thank you, Brad

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Your computer does not have Microsoft's Downgrade rights and you must buy a copy of Windows 7 with a valid Microsoft COA and product key.

  The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.

  

  In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• During the installation of SP2 (KB2656369) get 0x800706BE error message

  During the installation of SP2 (KB2656369) error 0x800706BE get tried restoring the system without success is - that someone has a fix for this problem?

  Hello

  Trying to download SP2 from http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=28

  You can install SP3 - download from http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=24

  Don't worry about the text which says that these are network facilities, they work very well for standalone computers.

  Tricky

• I get the error code 643 during the installation of the dates... I tried yesterday, some steps that have been put to me... they did not work... Please help

  I get the error code 643 during the installation of the dates... I tried yesterday, some steps that have been put to me... they did not work... Please help

  There are 2 updates will not install... Ive had this problem for the last 6 months

  See if this Microsoft Support will help you:

  http://support.Microsoft.com/kb/976982

  Note: there are 2 methods. If the August challenge it for me does not help, try a 2nd.

  Another article to number 643
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  .........................................................................................

  Take a look at this answer of MS Answers forums:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/what-is-error-code-643-Windows-vistaunable-to/4ab6dd4e-e9eb-4a0f-b822-ad976e2c33c6

• I am trying to install itunes 9 on windows vista. Get error message - error occurred during the installation of Assembly political 8.0.microsoft.vc80.CRT, type version 8.0.50727.403 win 31 policy publicketoken = process 1fc8b3b901e18e3b = x 86 architectur

  try to install itunes 9, get error message - error occurred during the installation of the political Assembly 8.0.microsoft.vc80.CRT, version 8.0 (see above). Am able to install quicktime OK. I uninstalled itunes and quicktime, cleaned the installer, deleted the users temp directory and restarted several times - always get the same error and does not support network for apple, install

  Hello. It worked for me:

  1. download and install 7 - zip;
  2 right-click the iTunesSetup.exe icon and choose 7-zip > 'excerpt from iTunes\ ";
  3. then double-click AppleApplicationSupport.msi and install;
  4 install everything except iTunes;
  5. install iTunes;
  5. it must be .

• get a windows installation error is not installed correctly during the installation of a 3rd - party in Windows Vista software

  I get an error message: windows install is not installed correctly during the installation of software 3 rd-party on Windows Vista Home Edition. Why I get this error and how to fix it?

  Hello

  I suggest you try the steps from the following link and see if that helps.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
  http://support.Microsoft.com/kb/2438651#appliesTo

• Get a black screen during the Installation of Windows 8

  Original title: BLACK SCREEN

  OK, I tried 5 times to install windows 8 by using the downloaded Update widows Pro

  I've updated the BIOS and other drivers and the only issue is to use the upgrade wizard is UEFI is not compatiable that shouldn't be a problem anyway
  So here's the BLACK SCREEN problem, I get all along to install past loan, after adjustment of the apparatus, after preparation, all the way to the end and then it gives just black screen until I power it turns off or reset and says windows 8 could not restore windows I get no error code or any hint of why there not everyone had an idea Yes stay with windows 7 is an excellent option, but I would try and brand and make informed decisions.
  I have internet search and it seems to be a common problem for many different reasons - ideas - Ive tried more things ive read without success. Help please

  Hello Kiwivic,

  Thank you for the question!

  I'm sorry to know that have problems you with the Installation of Windows 8. As I understand it, you get a black screen during the Installation of Windows 8.

  I need to ask you some questions to help you best.

  1. What is the brand and model of the computer?

  2 are the external devices connected to the computer?

  Method 1: disconnect any external devices (except keyboard and mouse) and then install Windows 8 and check.

  Method 2: Select the edge device devices in device/integrated graphic of BIOS (Basic Input output device) and check.

  Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  Reference link provided below for more information:

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  Meet us if you encounter any problems with the black screen or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• I just bought Adobe Acrobat 'download only version '. During the installation process, I wonder for my serial No. But nothing in the packing or the card has a serial number? How get/find my serial number?

  I just bought Adobe Acrobat 'download only version '. During the installation process, I wonder for my serial No. But nothing in the packing or the card has a serial number? How get/find my serial number?

  Hi williamw18489690,

  Please see this KB doc to find your serial number: find the serial number of your product Adobe quickly

  Let us know if you need additional assistance.

  Kind regards

  Meenakshi

• During the installation process of 6 of Lightroom, I get a box that says: Windows Vista not supported.  I have Windows 7 with Service Pak1. I meet all the other requirements listed.

  During the installation process of 6 Lightroom, I get a box that says 'Windows Vista not supported'.  I have Windows 7 with Service Pak 1.  I meet all the other requirements listed.  Any ideas?

  Hi Chuck,

  You can check out the link below.

  trying to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

  Hope this will help you.

  Kind regards

  Hervé Khare