PERC 5i RAID Controller battery replacement Question

Similar Questions

• PowerEdge 1900 perc 5 / I controller battery replacement

  I have a replacement battery message in the Application to manage Open Dell for a Dell PowerEdge 1900 Perc 5 / i controller. If I replace the battery I lose the current RAID configuration? Also all the procedures available for the replacement of the battery?

  Thank you

  Jeff Hicks

  Here is a link to the manual, page 92 will give you the steps to replace the battery: ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/poweredge-1900_Owner%27s%20Manual_en-us.pdf

  Your RAID configuration is stored on the discs. Turn the power off and replace the battery, then start back. Upon request, accept the configuration of readers and move forward.

  Kind regards

• Issue of PERC H730 RAID controller

  Hi guys. I'm a noob

  I'll order a Dell R430 with H730 raid controller

  2 SATA drives will be configured as Raid 1.

  My question is, can I add another 2 non-raid sata disk on the server? It will appear as two additional physical disks under windows?

  any help is greatly appreciated

  Yes, the H730 supports passthrough/no RAID and RAID.

• Raid Controller Batteria da auswechseln [GP]

  We have a server PowerEdge R710 che tell UN guasto del sulla batteria PERC/6i controller

  Desideriamo ricevere UN preventivo per sostituzione della parte. Grazie

  Saluti

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could come message privato mandarmi he suo email address?

  Speaking Saluti,

  GP

• Satellite 1100-Z6: battery replacement question

  Hello

  I own a Satellite 1100-z6.
  My pa3210u-1brs battery is dead and needs to be replaced.
  It's NiMh, 4500mAh and 9.6.
  Is the compatible pa3209u-1brs? Is lithium-ion, 4400mAh and 14.8V.
  I can get it for a price much lower.
  My existing charger will be always adapted?
  Any advice would be much appreciated.

  see you soon
  Ross

  Hello

  The fact is that recommend Toshiba using the battery original and supported.
  It is a PA 3210U Ni-MH 9.6 V 4 500 mAh
  Another or different batteries may damage the laptop. In this case, you must use the recommended.

• SSD compatibility w/PERC S300 RAID?

  We have an old PE T110 first generation with a PERC S300 RAID controller and 4x250GB drives. However, because the controller is older, there isn't much documentation about SSD compatibility. Does anyone at - he had success the upgrade of any server/workstation using a PERC S300 with an SSD of any kind in a RAID 10 configuration?

  Finally, I don't remember what type of connector is on the existing disks and am a little confused about the difference between SATA and SAS. What normally comes stock with this system and which would need if I moved to SSD? New cables? Anything else I need to know?

  htc2010

  is it not reasonable to assume I could just as easily swap on each drive in the Bay, one at a time, with a SSD?

  You cannot mix SAS and SATA drives in the same array. Also, you cannot mix HDD and SSD. If SSD does not support the S300, then he cannot know the difference between a SATA SSD and a SATA HDD, so it can work, but 1) I wouldn't rely on it and 2) just know that real RAID controllers, it can be done.

  In the end, I don't know if she will achieve your goals. The reason why I asked is because you could just add the SSD as a new VD, then move the files of database, etc. on to improve the speed, but it sounds like a lot of work for little return. I just invest in a backup recovery solution, good. If it can work in a virtual environment?

• PERC 6 / I RAID Controller w/256 MB cache and battery

  Will be the PERC 6 / I RAID Controller w/256 MB cache and the drums work on a Dell Precision T7400?
  Randy

  Hello Randy,

  Yes, you can add an a PERC6 / i of your T7400 as the PERC card was optional addon for the machine. Please see the link below & see the tech specs where the cottage on PERC 6 / I as optional.

  http://www.Dell.com/us/DFB/p/precision-T7400/PD

  Please let us know if you have any other questions.

• Reference DELL T420 - battery on PERC H710 adapter controller

  Hello

  I received a yellow warning

  Reference DELL T420 'Battery on PERC H710 adapter controller'

  What it means?

  What should I do?

  Order the new battery?

  It is a simple replacement mission?

  Is it essential?

  Update:

  test URL

  http://www.Dell.com/support/article/us/en/04/SLN130018

  Have nothing, everything seems fine now...

  Thank you

  It is normal so he can make a full discharge of the battery as part of his learning cycle every 90 days. Make sure that this isn't that. If this isn't the case, the reason, give it 24 hours. If it is fully charged, update the system (including RAID firmware, driver first) firmware. If not fully charged yet or it reproduces quickly, then replace the battery - power down to replace.

• HP MSA2312sa G2 RAID Controller replacement

  I recently noticed that 1 2 RAID on a HP MSA2312sa G2 Modular Smart Array controllers didn't.  Everything changed the controller, one which is still in good health, so everything is still in place and running.

  However, my question is to know if I can exchange hot failed by a new RAID controller or if I should close the appliance and all attached hosts down to make the replacement of material.

  Any help is appreciated because it's a device I don't have much experience with.

  Thank you

  Justin

  Hi, Justin:

  You can also ask your question on the Forum of HP Business - section SAN Support.

  http://h30499.www3.HP.com/T5/storage-area-networks-San-small/BD-p/BSC-257#.VAoGFHl0y9I

• RAID controller perc 5 / i Raid 5 rebuid of security

  Hello.

  need help.

  I have the raid 5 6-disc version. 136GB x 2 drives and 4 x 2 TB. (why? don't ask some black.)

  RAID controller perc 5 / i

  so a question is: can I discs remove 2 136 GB safety (without data loss) and rebuild the raid to work only with 4 drives of 2 TB and volume take all the space?

  You cannot delete records from the table - the number of disks must remain the same (or you can add to it). You need backup/restore to make a smaller VD.

• Sostituzione batteria R710 RAID controller

  Buongiorno.

  Sono a take UN preventivo relative alla batteria da auswechseln al PowerEdge R710 quanto sul display compare the written relative alla batteria del controller download.

  The batteria che ho trovato nel sito:

  

  e compatibile?

  Speaking saluti

  By how far the batteria del RAID controller, part da acquistare e questa. Accessories.euro.Dell.com/.../ProductDetail.aspx

  Saluti

  Marco

• RAID Controller Module battery - MD3000

  Buonasera,

  avrei need di una quotazione by UN di una batteria MD3000 RAID controller.

  Disponibilita della Grazie

  Buongiorno, the sto contattando by mail.

• PowerEdge 2900 Perc 6 / i internal Raid Controller

  OK, so I use a server Dell PowerEdge 2900 with a PERC 6 / i integrated RAID controller

  I have configured the RAID array very well, installed Windows 2008 R2 and works fine and dandy

  The only problem I encounter is that, when starting the server (Post), I get a message on the cable SAS B are not connected or misconfigured.  The bottom of the basket on my server, which goes to the internal drives, has only a port where I can plug a cable between the Perc 6 / i.  Where is the 2nd wire supposed to go?  I can't find the second port.

  Thank you

  Hello

  joeyjojo56

  I get a message on the cable SAS B are not connected or misconfigured.  The bottom of the basket on my server, which goes to the internal drives, has only a port where I can plug a cable between the Perc 6 / i.  Where is the 2nd wire supposed to go?  I can't find the second port.

  PERC connector 0 goes to the bottom of basket. Connector on the PERC 1 connects to the modular Bay. If you don't have the module Bay optional then you ensure that you use the 0 on the PERC and not the connector 1.

  Thank you

• Batteria Raid Controller Dell Poweredge 2950 [CF]

  Buongiorno,

  It operating system above tell che batteria del esaurita e raid controller.

  Potete fornirci UN preventivo by the sostituzione cortesemente?

  Grazie

  Buongiorno, the sto contattando by mail.

• Problem with RAID array after replacing defective RAID controller - Volume is currently in INACTIVE/GRADIENT condition

  We have a Dell PowerEdge 840, who had the RAID controller out yesterday - the system has come from a "ERROR!" Faulty card message.

  We replaced the controller with one we had shipped from one day to the next. System has been turned off, we made sure the installed updated Earth, etc etc. As soon as the system voltage, the following message came on the screen:

  ===============================

  Exception of RAID integrated detected:

  Volume (00:130) is currently in INACTIVE/GRADIENT condition

  Enter the SAS Configuration utility to study!

  ABILITY TO REVIEW OF HBA ID LUN SUPPLIER PRODUCTS

  0 free SAS1067-IR 0.10.49.00 NV 25:0 D

  Dell Inc. MPT ROM boot, no device supported found!

  ...

  No available boot device.

  ===============================

  What should I do to rebuild the table and see the data? Apparently, the server crashed some time after the office closed last Friday, but before that backups ran, so that we have not backed up the data on Friday.

  Thank you

  Baskervi,

  Start the BIOS of the controller (CTRL-C)

  Select the controller

  This will bring you to the adapter properties window.

  Use the arrow keys to highlight and select Properties RAID, press on enter.

  This brings you to the window again select array Type, there is now an option to view existing matrix. Using the arrow keys, select view existing array,

  Select the Inactive matrix. Select manage the Array.

  The only options available is to activate the table or delete the table. In order to get this controller to accept the disk configuration, select Activate array by using the arrow keys to highlight, and then press ENTER.

  Confirm Activation.

  Return to the main menu and select SAS topology and check that the two tables are active.

  Let me know how it goes.