Percentage of the processing load = 100
Hello
The guys I worked with 3 IPS 4260 2 and a 4270 yesterday, I noticed that the Inspection is RED. On the 4260 is the responsibility of the inspection.
SJDetec1 # sh - virtual statistical sensor | Load Inc.
Percentage of the processing load = 99
Hi Diego,.
I would go ahead and open a TAC case at this stage we take a glance.
Best regards
JT
Tags: Cisco Security
Similar Questions
-
Foglight FxM - percentage of the processing load
All,
Just search on edocs with no luck. Any idea of what 'percentage of processing load?
Percentage of the processing load is in the 'Foglight experience monitor metric reference Guide' which is available in the document in HTML or PDF format.
According to: http://edocs.quest.com/foglight-enduser/563/doc/FxMAppliance/FxMAppliance-metricref/8-metricdefns.24.2.php
Percentage of charge treatment "represents the percentage of treatment assigned to a specific server or application."
Calculation:
Total load percentage = total processing time to a server processing time is distributed among all servers
Kind regards
Brian Wheeldon
-
I'm running OS X 10.11.4 on my mid-2009, 2.26 GHz Core 2 Duo 13 - inch MacBook Pro, updated updated to 8 GB of RAM. For these last days, a process called 'VTEncoderXPCService' has been constantly running like crazy on my Mac, using about 150% CPU. This slows down my Mac to a crawl, especially Safari, where I usually end up with beach balls every 20 to 40 seconds. I need help [figure out what is the cause, as my Mac is basically unusable because of the drop in performance.
This is a background process that converts the video in a photo or iMovie library. If an iOS device is connected, please disconnect. In the iCloud system preferences pane, uncheck that marked Photos. The activity should stop.
-
DV6 1055ee process went 100% constantly - edited and moved from previous thread
Hey guys,.
I really need help but I have not found a similar topic to my problem, but it was that it was the closest to you.
In any case, I have this gadget for windows 7 which shows my memory and addresses the use
After installing windows 7, my 1055ee dv6 didn't have any software or programs or updates so logically all the drivers were empty except C which had windows.
A few hours after the installation so I was surfing the internet I found my Notebook 80% process then I closed internet Explorer and had no applications running at all, even if the process went 100% constantly for 15 minutes and of course the fan speed is too high, I wish that there is a solution for my problem ,
Thanks in advance
Hi, skate,
It is certainly a persistent problem. First, download the Chipset driver from the link below and save it to your desktop.
Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation. When you are done, reboot the laptop.
Let me know if this has made all the difference.
In addition, press and hold the fn key and press escape to bring up a window with system information. Could you post back with the current Bios level and date.
Kind regards
DP - K
-
Original title: Task Manager
Manager tasks shows my CPU 100% usage but when I go to the processes tab and sort by CPU usage there are only a handful of programs with a percentage higher than 0 if displayed and none of those who are more than 3%. What else is using my system resources that is not displayed by the Task Manager?
Click Show processes from all users . There may be other systemic processes and processes that run under other accounts.
Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]
-
tried in safe mode. deleted in safe mode. reinstalled. even deleted the folder under the name of proposed assistance. It still seems to load, but nothing comes. I can find it in the process, but it never shows in applications. has failed during a restoration and a saw, then a note "xpcom. Not understand. no update or changes in the config. just stopped working.
Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.
Download a new copy of Firefox and save the file to the desktop.
- Firefox 26: http://www.mozilla.org/en-US/firefox/all.html
If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.
- Do NOT remove the data personal when you uninstall your current version of Firefox, because all profile files will be deleted and you lose personal data such as bookmarks and passwords from other versions of Firefox profiles.
Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.
- (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
- (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
- It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
- http://KB.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.
If you keep problems also create a new profile.
-
Windows 2000 SP4, 1 g RAM, Firefox version 9.0.1
We keep IE6 and Firefox open simultaneously to 2 different email accounts. Firefox has always been much faster even with 3 or 4 tabs open, but for the past few weeks trying to update a screen suddenly CPU goes to 100% usage and of course nothing will move until the process is complete. Close one or more tabs does not help. If I close Firefox completely using the task processor Manager goes back down to zero. After restarting Firefox CPU use may or may not go back to the top as he tries to continue the previous task which has been lock him up.
He did this with Firefox 3.6, but still it did not happen immediately after the 9.0.1 update either.Hi vbolton,
Have you looked at the Knowledge Base article Firefox using too much memory (RAM) - how to fix the or Firefox using too many resources CPU - how to fix? There is a lot of information in there.
Hope this helps!
-
Original title: I can't find the fix_svchost.bat file update.
I'm in you process of having my computer running faster. The svchost.exe process takes 100% of cpu memory and computer dthe freezes. A friend of mine told me a method to solve the problem, but I can't find the fix_svchost.bat update. I went to microsoft update center and don't find any results at all, and I don't know another place to look for. I think that the update does not even exist.
I could send you a fix_svchost.bat file, but I don't think it's the starting point.
What you need to do is run a few respectable scans for malware first, and then see if any of you are your svchost.exe process is still badly behave.
Behind each of the svchost.exe process that see you in the Manager of tasks can be one or more process of XP you have to be running, but malware is KNOWN to imitate or hide behind a svchost.exe process, so you won't be able to see in Manager tasks. You have to outsmart it.
First yo should make a reasonable effort to eliminate malware, and then start troubleshooting - not the other way around.
Provide information on your system, the better you can:
What is your system brand and model?
What is your Version of XP and the Service Pack?
Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..
No matter what you use for malware protection, follow these steps:
Download, install, update and do a full scan with these free malware detection programs at:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/These comprehensive analyses can take some time, but you really need to run. SAS will probably be just a bunch of Internet tracking cookies, but you can remove them. Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.
They can be uninstalled later if you wish.
In 1985, there were 11 known computer viruses. Today, there are over 70,000 and new threats are detected every day. Always update your virus definitions before running a scan.
-
Since I loaded items 14 in my computer, the program stops working after having worked on the images and I try to save the processed images. This happens over and over again and I am very angry that this continues to happen. After working on an image for 15-30 minutes I lose everything I did when the program stops working... This is extremely frustrating, as I can't use the program
Hello... Adobe, you have a phone number I can call to talk about this?
Why don't answer you my survey?
-
How to correctly get the percentage of CPU being used by the process
I try to get the % CPU used by process under windows with Qt/C++. First to get a list of running processes and after that, for each process, I try to get the CPU used, for most of the processes that the result seems valid (they correspond with the windows Task Manager), but with the process of AIDA64 (running a CPU in the background stress test), I got strange as 312% values what is the problem with my code c ++?
sigar_t *sigarproclist;
sigar_proc_list_t proclist;
sigar_open(&sigarproclist);
sigar_proc_list_get(sigarproclist, &proclist);
for (size_t i = 0; i < proclist.number; i++)
{
sigar_proc_cpu_t cpu;
int status1 = sigar_proc_cpu_get(sigarproclist, proclist.data[i], &cpu);
if (status1 == SIGAR_OK)
{
Sleep(50);
int status2 = sigar_proc_cpu_get(sigarproclist, proclist.data[i], &cpu);
if (status2 == SIGAR_OK)
{
sigar_proc_state_t procstate;
sigar_proc_state_get(sigarproclist, proclist.data[i], &procstate);
qDebug() << procstate.name << cpu.percent * 100 << "%";
}
}
}
sigar_close(sigarproclist);
You may need to scale (divide) by the number of cores. This is the sigar code uses on windows to deliver the cpu process:
SIGAR_DECLARE(int) sigar_proc_time_get(sigar_t *sigar, sigar_pid_t pid, sigar_proc_time_t *proctime) { HANDLE proc = open_process(pid); FILETIME start_time, exit_time, system_time, user_time; int status = ERROR_SUCCESS; if (!proc) { return GetLastError(); } if (!GetProcessTimes(proc, &start_time, &exit_time, &system_time, &user_time)) { status = GetLastError(); } CloseHandle(proc); if (status != ERROR_SUCCESS) { return status; } if (start_time.dwHighDateTime) { proctime->start_time = sigar_FileTimeToTime(&start_time) / 1000; } else { proctime->start_time = 0; } proctime->user = FILETIME2MSEC(user_time); proctime->sys = FILETIME2MSEC(system_time); proctime->total = proctime->user + proctime->sys; return SIGAR_OK; }
The doc of api windows indicates the time here is a sum on all threads and must therefore be reduced by the number of cores.
We had something like this in our use of links Java the 1.6.4 release of SIGAR. I'm curious to know if it works for you.
Best,
Vishal
-
Load the process returns a null value but on refresh the values of loads? !!
Hi all
With the help of apex 4.1.1 oc4j 11g Linux
I'm building a feature that allows you to register by e-mail.
Page 1
The user enters a name email address ,& the last statement name Insert is executed
Select count (*) in c_email - if 0 then the person does not exist and is permitted
of sor_notification_person
where sor_notification_person. EMAIL_ADDRESS = P_S_EMAIL_ADDRESS;
If c_email = 0 then
-Package.procedure send email and fact the insert
SOR_NOTIFICATIONS_PKG. signup_person (P_S_EMAIL_ADDRESS = > P_S_EMAIL_ADDRESS,)
P_S_FIRST_NAME = > P_S_FIRST_NAME,
P_S_LAST_NAME = > P_S_LAST_NAME,
P_S_CONFIRMED_EMAIL = > P_S_CONFIRMED_EMAIL,
P_S_SESSION = > P_S_SESSION,
P_S_APP_ID = > P_S_APP_ID,
P_B_SUCCESS = > P_B_SUCCESS);
Page 2
Clicking or copying pasting the URL received in e-mail. I have on the loading process that verifies the checksum value in DB and fills in the data.
declare
number of CT ;
P31_checksum(Varchar2) 30).
E-mail varchar2 (90);
What varchar2 (40);
L_Name varchar2 (40);
P31_TEST(Varchar2) 40).
Start
: P31_TEST := null;
SELECT count ()*) in ct
OF SOR_NOTIFICATION_PERSON
où SOR_NOTIFICATION_PERSON. checksum =:C;
DBMS_OUTPUT. put_line ()ct);
if CT > 0
then
SELECT SOR_NOTIFICATION_PERSON. email_address SOR_NOTIFICATION_PERSON. name, SOR_NOTIFICATION_PERSON. last_name in l_name what Email
OF SOR_NOTIFICATION_PERSON
où SOR_NOTIFICATION_PERSON. checksum =:C;
: P31_TEST := 'Y ';
: P31_EMAIL_ADDRESS:= Email;
: P31_FIRST_NAME := what;
: P31_LAST_NAME:= l_name;
else : P31_TEST := 'n';
(- dbms_output. put_line () P31_TEST);
end if;
end ;
Problem when I view the item hidden, I can see the value of checksum, but the P31_test is always null in load. When I hit refresh page P31_test valid and displays the value.
The two elements are the value only when the value in session state is null.
What could be the reason because it does not load even the process is defined as load before region / once per page visit...
Thanks for your help.
Okay - not sure then. On a new blank page I can have processes assign a value to the session state from the element and the element will have this value when the page is rendered (at least with this type of source). Work of dynamic actions. As I expect. I don't know what happens next 'unfair '.
I'll only come back tomorrow, but here are a few tips:
- create a workspace on apex.oracle.com and upload your page there. Share of the developer credentials and the name of workspace with us. In this way may inspect and do not need to do the back and forth until we reached something special we both lost from view.
- When the page is loaded and you hit the session in the developer toolbar, what is the State of P31_TEST? Is it worth?
- try to run the page in debug and see if you can spot something happens with the session state from P31_TEST - maybe you'll come across something
-
How to automate the process of loading data using load file &; Task Scheduler
Hello
I do the automated processes to load the data into Hyperion Planning application using the file data_Load.bat & Scheduler of tasks.
I created Data_Load.bat file, but the rest of the process, I cannot complete.
Could help you me, how to automate the process of loading data using the file Data_load.bat & task Scheduler or what are the rest of the file is require it to achieve.
Thank youIn response to your question using the maxl for loading scripts?
If Yes, I've seen and deliver in the batch (ex: load_data.bat) that is you do not have the path of the maxl script complete with a batch when passing through the event the task scheduler will work, but the log file and / or error will not be created. Which means lots claims it linked task scheduler, although he did not do what you need to.
If you use maxl use this as the batch
"essmsh C:\data\DataLoad.mxl" or you can also use the full path for the maxl or work elsewhere. The only reason why I think that the maxl can then not work is if you do not have the updated batch updated to call on all LANE changes maxl or if you need to update your environment variables to correct the command essmsh to work in a command prompt.
-
Automate the process of loading data using Task Scheduler
Hello
I do the automated processes to load the data into Hyperion Planning application with the help of the Task Scheduler.
I created Data_Load.bat file, but the rest of the process, I cannot complete.
So could you help me, how to automate the loading of the process data using the file Data_load.bat & Task Scheduler.
Thank youWindows 2008? Open the Task Scheduler, Action > creates a fundamental task, give it a name, select the frequency, select start a program, find the batch script, then you're pretty much done for a basic task.
See you soon
John
http://John-Goodwin.blogspot.com/ -
Process / task manager has a svchost.exe thatreally slows down and sometimes crashes my computer. Windows XP Media Center Edition with
SP3. Is there any solution for this?
It is usually associated with the Services. One instance of "svchost" can support multiple services.
The first step is to download and run the "Process Explorer" from Microsoft
<>http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653 >
This program is the the Task Manager on steroids (once you try it, you'll never go back to the Task Manager). Once you start, you should have no trouble to identify which instance of "svchost" consume all your CPU. When you do this, place your cursor on this "svchost" in the process column. A pop-up menu lists the services that are currently covered for this instance of svchost.New commissioning Services (start-> Run-> "services.msc"). Find running services that correspond to the list that you obtained in the previous step. A double click on this service will give you a screen that will allow you to Pause or stop this service. Try to stop the appropriate services until you see your CPU down to normal. This will determine what service is the consumption of the CPU. How you handle this from here will depend on what you find.
(As a side bet, my money is on the "Windows Management Instrumentation" service.)
HTH & good luck,
JW -
Can I quit CTF Loader application to start the process?
Norton Security Suite suggested that I have cut some Start Up processes to speed up my departure performance. I need to know if I can close the ctfmon.exe from Start Up?
Hi MissTheresa99,
You can remove ctfmon startup application. If you do not use any recognisation of speech, you can delete it in the process listed in the http://support.microsoft.com/kb/282599.
I hope this helps.
Maybe you are looking for
-
Missing CD imported into iTunes on my computer
Its on my phone, but not in itunes. I can't sync because I'm going to lose on my phone. What giant a waste of time if I lost him. How imported music could disappear from iTunes? I know that they were not deleted
-
Instant hotspot is a problem for families
We are a family of Apple. We have several Apple devices in our homes. All devices use my Apple ID. What I discovered accidentally with iOS 8 is the instant Hotspot feature. I did not know that children might trigger my hotspot without my knowledge an
-
Can install a WiFi on my Pad R51 think - 2887 - ql7 by downloading all that may be required?
-
CRIO-9022 controller does support LV RT 8.5.1?
Hello world. CRIO-9022 controller does support LV RT 8.5.1? Thank you. Daniel R. CLD
-
My husband is spent, how to close his email and facebook
Recently spent my husband, how to remove his e-mail and facebook accounts?