Performance graphics problem because the time change?

Hello

It seems that there is a problem with the graphic display of Performance on my system (vsphere 4.1 esx 4.0 servers) from 31. October 2010. I suspect it has something to do with the time change that occurred last Sunday night in my area of time (time Switzerland).

(1) in time real Perfomance data are displayed on the VM and ESX Server objects.

(2) any other array performance (daily, weekly, annually) fails to display

If 3) use graph custom, I can go back until 1 November (until today), but not yet back. This is why I think it has to do with the time change of last Sunday.

When I look at stats.log, there are error messages as in the txt File attached.

Any ideas? It is not tragic if the old performance data are lost... were put in place with a new DB in September... but I would like to see in the future the performance stats...

Here a KB for this issue: http://kb.vmware.com/kb/1030305

To work around the problem of time atothr, you can try to use "Advanced" on the performance tab reports.

Tags: VMware

Similar Questions

  • The computer did not resync because the time limit was the big change

    Hello

    Initial synchronization problem title: the time in Windows 7 Ultimate edition.
    I have problem with the clock of the computer, I did search but could not find the solution.
    I bought a workstation HP xw8600 outside of the server to lease on Kijiji and installed Windows 7 ultimate.
    My clock is waste of time why I tried following options.
    1. I changed the COMS battery - did not work
    2. I update BIS version - did not work.
    3. I try to implement the interim solution of calendar, a task to synchronize at startup time. by using two commands on
    net start w32time
    w32tm/Resync.
    by doing this, I found that I can't run these commands I need to run these as an administrator, I am able to run these commands in a command window (only if I open the cmd window using the option "Run s administrator". all how create script but and create a shortcut to this script, the value of running as an administrator) When I double click the short cut, it works but do not work in Task Scheduler. After that, I became busy on another work and returned to this question now, the script gives me this error "I don't me the resync computer because the time limit was the big change."
    So there are lost of the question, please advice the best Yes solution of this problem.
    Thank you
        

    Hello

    Method 1:
    You can synchronize the clock of the computer with a time server Internet. This means that your computer's clock is updated to match the clock on the time server, which can help ensure that your computer's clock is accurate. Your clock is usually updated once a week and must be connected to the Internet during synchronization to occur.
    1. open the Date and time by clicking the button of theStart, clicking Control Panel, click clock, language, and region, and then clicking the Date and time.
    2 click ' time tab Internet and then click on change settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. Select the next toSynchronize box with a time server Internet, select a time server, and then click OK.
    Note
    If your computer is on a domain, you cannot synchronize your clock with a time server Internet.


    Method 2:
    I also suggest you to check whether your computer time zone settings have been set based on your current location.
    You can check the link below to adjust the time zone correctly-
    http://Windows.Microsoft.com/en-us/Windows7/set-the-clock
  • Windows Defender encountered an error: 0x800705b4. This operation completed because the time-out period night.

    Hello

    I'm a Microsoft Online Customer Service, which contacts on behalf of my client. It lights its Windows Defender and received this error message below:

    «Windows defender encountered an error: 0x800705b4.» This operation completed because the time-out period night. »

    Hello

    ·         You have a third-party security software installed on the computer?

    Method 1:

    If so then try to disable the antivirus and then check to see if you can turn on Windows Defender.

    You can check this link for more information on turn Windows Defender on or off: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Defender-on-or-off

    Note: Make sure that you enable the antivirus once you are finished with the test. If the problem is resolved, you may need to contact the manufacturer of the program for the settings that can be changed or if there are other updates for this program.

    Method 2:

    Follow the steps in troubleshooting this article and check if that helps:

    How to troubleshoot Windows Defender definition update

    http://support.Microsoft.com/kb/918355

    Also, try the steps in this article: Impossible to activate the application Windows Defender in Windows Vista

    Method 3:

    Try to restart the Windows Defender service and check if it helps.

    a. Click Start on the start menu, search type services.msc and press ENTER.

    b. in the services window, locate Windows Defender service in the services list.

    c. check that the status is started. If the condition column is blank, right-click on the service and select start.

    d. If you get error trying to force start the Windows Defender service, try to change the Startup Type to automatic and restart the computer.

  • I have installed Adobe Audition on my pc but I have a problem with the time and the effects of pitch appear unavailable

    I have installed Adobe Audition on my 64-bit pc but I have a problem with the time and the effects of pitch appear unavailable because... I can do?, installed on another PC laptop 64 bist and does not

    My guess is that you are in multitrack view and not editview

    These fx are destructive and only take effect when you change a single audio file in editview

  • Message: Cannot perform this operation because the default mail client is not properly installed

    I get the following error message:

    Cannot perform this operation because the default mail client is not properly installed

    Could someone help me please?

    Moved from the community involvement Center

    Hello

    You have a common problem of Windows 7. You must set a default e-mail program and Windows 7 did not come with a pre-installed email program.

    The default e-mail program must be installed on the computer - for example Windows Mail (Vista), Windows Live Mail, Thunderbird, etc.

    Windows Live Mail is popular
    http://Windows.Microsoft.com/en-us/Windows-Live/Essentials
    Is Thunderbird http://www.mozilla.org/en-US/thunderbird/

    Windows Essentials help:
    http://Windows.Microsoft.com/en-us/Windows-Live/Windows-essentials-help

    You can access outlook.com via Windows Live Mail

    Set up an email application with Outlook.com - Microsoft Windows Help:
    http://Windows.Microsoft.com/en-us/Windows/Outlook/send-receive-from-app

    After installing an e-mail program, make sure you have a default e-mail together program control panel > Default programs > set access and computer program defaults > Custom > click on the arrow down.

    Web-based e-mail services can only be made the default e-mail program in these 2 cases:
    * Yahoo, with the Yahoo tool bar
    http://help.Yahoo.com/l/us/Yahoo/mail/YAHOOMAIL/settings/settings-10.html
    * Gmail with the installed Google toolbar

    https://support.Google.com/toolbar/answer/34800?hl=en

    Don

  • Unable to repair the connection of local error: Windows could not finish repairing the problem because the following action could not be completed

    Original title: Repair the connection to the local network.

    When I try to repair the connection to the local network I get the following message: "Windows could not finish repairing the problem because the following action could not be completed: clear the cache DNS."  For assistance, contact the person who manages your network. "How can I solve this problem?

    Hello

    1. what exactly is the problem you are experiencing when connecting with Internet?

    2. what type of Internet connection you have (wired or wireless) sound?

    3. don't you make changes to the computer until the problem occurred?

    Method 1: To resolve this issue, follow these steps:

    (a) click Start, click run, type services.msc, and then click OK.

    (b) in the list of services, click DNS Client.

    (c) ensure that the status column displays started and that the Startup Type Automaticcolumn.

    (d) if the service is not set to started or if the startup type for the DNS Client service is not set to Automatic, follow these steps:

    a. right click on Client DNS and then click Properties.

    b. in the Properties of the Client DNS dialog box, click the general tab and then click Automatic in the list Startup type .

    c. click Start, click applyand then click OK.

    Method 2: Wi - Fi and in Windows network connection issues.

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

    Hope this information is useful.

  • Not able to download error summary "could not perform this operation because the mail by default is not installed correctly"

    Victorinox original title: Windows problem

    Im a senior looking for a job. When I'm craig's list and to to load my windows exployer RESUME come with a window that says "cannot perform this operation because the default mail is not properly installed. Can someone give me please a detailed step by step procedure to solve this problem?  Thank you so much Denny

    Hello Denny carguy,

    -Who is your provider of mail service?

    Windows XP has the default Outlook Express e-mail client. To send and receive emails using Outlook Express, you must configure it.

    See the links to find out how to set up Outlook Express in Windows XP.

    How to set up Outlook Express

    Microsoft Outlook Express

  • "Could not perform this operation because the default mail client is not properly installed" when you use Windows Mail

    Original title: loss of entrance of Protocol in the list of saved files

    I use an old Toshiba laptop of two year with Vista as an operating system. It came with a trial version of Microsoft Office already installed. I had no use for it then after the trial expires I uninstalled. This seems to have created a minor problem with the e-mail program. When I visit a Web site and click on 'Contact us' I get an error message as follows "cannot perform this operation because the default mail client is not properly installed." I suspect strongly as during the uninstallation of office he removed a protocol in the list entry, similarly, the bottom of the list of the saved files. A check with other similar computers with Vista installed seems to confirm this. If someone at - it a quick fix to this problem? I don't want to resort to installing a whole new email software to fix this minor problem if I can avoid it.

    Hello Karena R, yesterday, I downloaded and installed Windows Live Mail, and I must say that I prefer Windows Mail Live Mail program. After making sure that Live Mail is the deafult for all messaging functions and that the entry "Mail Protocol" was now back to the list of saved files, I checked the problem mentioned in my original post. He is not fixed! Another small problem is fixed now if. In my "drafts" mailbox I have some e-mails stored there and when I click on one of them upwards now comes an email with the appropriate address inserted in the address line. Who could not before. I used to get this error message, which is now the new title of my post. So why the difference when I click on email address that I find on Web sites? Now, I also find that by Michael following the instructions (below), I do not see an entry "mailto" but his suggestion to step d. type in "URL Protocol" is not appropriate because it is already there. The installation of an entirely new email software should have my computer all the necessary entries for the new program to function properly in all respects. So what's happening? It begins to look as if uninstalling the program Office has pulled something real Vista operating system.

    It's a good thing, I thought of the research on other boards for my missing post.

    HKEY_LOCAL_MACHINE\Software\Classes\mailto

    c. in the Edit menu, select new, then clickstring goodwill.

    d. type of Protocol of URL as the name of the new string value

    e. exit the registry editor

  • Error message when opening the parts attached Windows could not perform this operation because the explore default e-mail client has not been installed correctly.

    Original title: fault of the Explorer

    How can I solve this problem.

    Sometimes when you try to open an attachment, I see this message:

    Windows could not perform this operation because the explore default e-mail client has not been installed correctly.

    Thanks for your HELP!

    Hi Robert,.

    Thank you for your response.

    Please let us know if you need help with Windows, we will be happy to help you!

  • When I go to send mail sometimes I receive a message saying (cannot perform this operation because the mail client is not installed properley)

    E-mail client

    When I go to send mail sometimes I receive a message saying (cannot perform this operation because the mail)

    client is not installed properley) thanks Karen

    When I go to send mail sometimes I receive a message saying (cannot perform this operation because the mail)

    client is not installed properley) thanks Karen

    Hello

    Please see the post below for links to support for all the popular email client programs.

    Where can I get help with my questions by e-mail? (Windows 7)-Microsoft Answers:
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/where-do-i-get-help-with-my-email-questions/461490c7-302b-4cc8-bcd9-127e177d71c3

    Concerning

  • Cannot perform this operation because the default mail client is not properly installed... help

    I can't send an e-mail from a link on a page without getting this error... "could not perform this operation because the default mail client is not properly installed"...    My windows mail is set as default and I can receive and send him good, please help.

    Thank you

    A program is defined as default does not mean that it has considered all of the default roles available.  In the case of Outlook 2007, there are 13 total default values that can be assigned, and it should have each of them.  It is possible to default Outlook for e-mail, but not the default value for write links in web pages.

    HAL

    --
    HAL Hostetler, TCE
    Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
    www.kvoa.com - KVOA television, Tucson, AZ.
    Live Hot Licks - www.badnewsbluesband.com
  • I get a message "Cannot perform this operation because the default mail client is not properly installed". What should I do?

    I get a message "Cannot perform this operation because the default mail client is not properly installed".  What should I do?

    Unlike Windows XP & Vista, Win7 does not have a default email Client. [What were thinking?]

    You will need to install a (e.g. MS Outlook;) Windows Live Mail; Thunderbird) , and then set it as a default for mail in CUSTOM (<>) article in Set Program Access and defaults of the computer , then restart your computer before any function send to or MailTo will become available.

    In this forum, you will find some support for Outlook: http://answers.microsoft.com/en-us/office/forum/outlook

    Note: Office 2010 Home and Student Edition is not include Outlook.

  • Problems with the time in Windows 7 (64-bit)

    The time on my computer is always off.  Even when I change the time to the exact time in my bios the weather is bad in Windows.  I chose the right time zone, but it's still 6 hours off.

    When I was first troubleshooting I could just sync the clock to the internet through the GUI, but after a reboot or two time, the weather was wrong, once again.  I was looking for something more permanent then I tried things like the time service restarts windows.  I followed these instructions then because this person was having a similar problem.  It was suggested to run these commands:

    net stop w32time

    w32tm /unregister

    w32tm /register

    net start w32time

    w32tm/Resync

    This helped temporarily, but now I have an error the command net stop time w32t.  CMD says "the time service Windows is not started."

    When I go to my services time service Windows is there but not started.  When I try to run it I get this error:

    Here is a picture...

    I hope this is enough information.  Thanks for the help!

    Hi EvanDinelli,

    To resolve this issue, follow these steps:

    Note:
    this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

    a. Click Start, type regedit in the search box and then click regedit.exe in the list programs.

    If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
    b. Locate the following registry subkey and click on it:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\TapiSrv

    (c) in the part of details, right-click ImagePath and then click on edit.

    d. in the value data box, type the following registry value, and then click OK:
    %SystemRoot%\System32\svchost.exe k NetworkService

    Note if NetworkService does not appear in the registry %SystemRoot%\System32\svchost.exe - k NetworkService value, the problem that is described in the "Symptoms" section may occur.
    e. exit the registry editor and then restart the computer.
    Note
    if you try to start the telephony service before you restart the computer, you may receive the following error message:

    Error 1290: Starting the service failed because one or more services in the same process have a service SID inconsistent type parameter. A service with service restricted SID type can only coexist in the same process with other services with a restricted SID type. If the type of SID for this service has been configured, you must restart the hosting process in order to start this service.

  • IR hotsync problem: "because the port is in use by another application."

    I finally got my system operation.  Sony Clie TJ - 25 pda, Palm Desktop 4.1, Windows 7 64 bit.  Very delicate balance.  I failed to install the new software released by aceeca.  I finally got it by infrared hotsync.  Several times.

    Now, today, I get the message on the Clie: "could not start the hotsync operation because the port is in use by another application."

    I saw this thread and in fact ensure that the transfer of images using a digital camera box is unchecked.  It still does not.  The icon hotsync in the lower right part of the screen, when I check that IR is checked, nothing else is.  It still does not.

    Thoughts?  Ideas?  Suggestions?

    Cidercat I had this happen to me with bluetooth hotsync before. I listen to radio, transfer files and surf the web with bluetooth. I could solve the problem by turning off the bluetooth, then turn it back on. Sometimes a warm reboot might also work. I came across a free application for the Palm tree named NetworkDown. It closes completely all active sessions down. You type right on the icon to run it. It works on my TX.

    http://www.metaviewsoft.de/en/software/PalmOS/freeware/other/NetworkDown.PRC

  • Graphics problems during the game Age of Empire II in mode full screen in Windows 7

    Original title: screen resolution and/or graphics problem with Windows 7.

    Hi, I had currently two computers in my house upgraded to windows 7, one a Vista XP.

    I am trying to run Age Of Empires 2 on both computers, the game has installed and running with ease, however it won't let you play the game in full screen, and also the color of things like grass and trees appear in red and orange, water displays brilliant purple.

    I tried to change the windows screen resolution and the resolution of the options in the game, but it only changes in the percentage of the screen resolution, that he chooses to play in.

    I can solve this? All advice is appreciated and thanks in advance.

    PS I tried to reinstall and update graphic drivers, both computers have the same problem of new clean installations of windows and Age of Empires 2.

    Thank you

    It is a problem due to the fact that AOE 2 was built on the platform Windows 95/98 Win9x. It will expose a few graphical artifacts while playing. You can try setting compatibility Win98 or Win95 check. There is also a workaround that may work in my opinion. You will need to search for "how to run StarCraft (1) on Windows 7" in Bing (Alternatively, Google: P) and it would show a site with a .bat file that could solve the problem of graphics in fullscreen.

    I hope this helps.

    What I did with StarCraft was this:

    On the desktop, right-click and select new text Document. Inside the Document, type this

    Taskkill /f /IM explorer.exe
    D:\"StarCraft"\"StarCraft.exe".
    Start explorer.exe

    Just replace the location of StarCraft with the location of the AOE II.

    Save the file as: 'AOEII.bat' and then set the file type to the text file to all files.

    What happens is that if corrects the discoloration and restart the explorer again after the end of the game. Although there is no easy way to change the icon of the good bat file: P

Maybe you are looking for