Performance of camera Y510P

Similar Questions

• hard drive replaced a moment my performed web cam will not work

  I have a dell m5030 I lost my o/s I had the hard drive replaced a moment made my web cam does not work WHY?

  willmason1953,

  When you have installed the operating system, have you installed the utility of the portable system and the first chipset drivers? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct order

  Rick

• Portege R700 webcam goes dark in low light conditions

  Hello

  Since I bought my Toshiba Portege R700 about a year ago I had problems with my webcam. I looked in several forums but couldn't find an answer. My build in webcam has problems of adaptation in the light of the room.

  When the room is dimly lit camera turns almost black after a few seconds. It is interesting enough before the camera darkens, he manages to produce a picture is ok for a few seconds, which means that the camera is capable of producing an image ok in low light conditions.

  She has just problems adjusting the brightness in the room when it is poorly lit. I propose to toshiba update the software of the camera, since it is clearly a matter of software. And yes I've tried every single possible configuration for the camera! And Yes, I also reinstalled (several times) the camera driver.

  I know that the camera performs well in places that have good lighting and so I'm only interested in improving my performance of cameras when not much light is available.

  Thank you very much
  Clem

  Hi dude

  I understand that you would expect webcam great performance in poor light environment but I put t do you think it would be possible to get the good quality photo using the laptop is dark rooms.

  The material of these small internal cams is limited and you see the same issues with other devices like smartphones cameras that resemble the internal cams s notebook.

  In addition, the webcam software that is preinstalled on my laptop Toshiba supports the night mode option that allows you to improve the quality of the obscure image in the Middle but of course you will not get the same image quality if you want to use the cam in the luminous environment

• need help, troubleshooting with Photo Gallery

  good so I stumbled on another weird little problem w the XT. not deadly

  somewhere along the line, I lost the ability to open the photo gallery. I will open for half a second and then closes automatically. He does everything by selecting it from an application, and it does if I try to open in the drawer.

  So that's where to look for the community. does anyone else have this problem? If so what is the apps that you have installed?

  I have about 60 applications on the phone, but those who directly perform the camera are:

  Ustream

  PicSay

  FxCamera

  barcode reader

  now the applications that can use the Photo Galleryive installed ones)

  Bettercut

  Facebook

  handcent

  There are probably others just have not used yet.

  So just let me know if 1) you have one of these installed apps 2) you have the same problem as me.

  Thank you

  
  

• The Security Center has not recorded an antivirus product.

  My firewall is showing errors, so I did a scan of the resource and Performance and came up with this error. (shown above). I'm supposed to "validate an antivirus product is installed. Do not know how to proceed. Someone has an idea?

  My firewall is showing errors, so I did a scan of the resource and Performance and came up with this error. (shown above). I'm supposed to "validate an antivirus product is installed. Do not know how to proceed. Someone has an idea?

  Hello

  See the following article for an explanation of potential problems.

  2028210 action center in Windows 7 reports that anti-virus is not installed

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Object removal/hiding in AE

  Based on a proposal, I am come this post of Premiere Pro.

  The condensed version of my problem:

  I asked for the best method to remove the droppings of birds with a Pavilion roof in a unmanned aerial vehicle video I shot. I was directed to this excellent tutorial 'chinfat': After Effects CC 2014 Tutorial - 3D camera Tracking and removal of the object - YouTube

  Here is my result:

  Thanks j. Simon... He did and it didn't.

  The tutorial is very well done and seems pretty easy to follow. I sent the clip to AE, complete step "track camera" as was done in the tutorial, created the solid and the camera, exported a frame to ch, corrections to the upper canopy of the gazebo, sent the image to the AE and it merged with the solid. Unfortunately, unlike his video where the window rest frame simply in place, my awning would not. As and the clip, the 'new' canopy high with the camera. I watched this video, a dozen times or more, and could never understand what I did wrong.

  Frustrated, I started above square, but ran into a wall after the stage of the "trail camera. Once the scan is complete, an error appeared: 3D Camera Tracker: size of layer must match composition and use default values for transformation.  Therefore, any point of the track have been created. I ran into the same wall several times, and then he threw in the towel.

  For later use, that I would like to know what I was doing wrong (IE, why don't the solid does not stay in place) and what is happening with this weird error message?

  Thank you.

  If you have a perspective of change in the object you want to replace that changes significantly the view of this object then you must replicate this change of perspective in your replacement image. You said:

  As and the clip, the 'new' canopy high with the camera.

  Makes me think that your aerial shooting starts low so the canopy is seen from the front so the shot moves upwards, you can see the sides and the top of the canopy. If this is the case, you will need to create a 3D model more complex of the canopy, then you can follow the camera.

  You could also mean that the canopy does not stick to the gazebo. This means that your path was good or that you have chosen the bad points on the surface.

  This is where the screenshots would help. I think that the replacement roof does not stick to the gazebo.

  A step which was left aside in the tutorial of good but not perfect was the first step in creating a plan for mass and origin. The second part of the tutorial that may give a false impression, it's that he didn't select enough points on the plan to get exactly the target. If you followed his technique to get a target who has been close to looking like it has been aligned with the plan or the surface you were trying to replace then turned solid so she looked like she was the plan that you were probably out of alignment. To align a solid with a plane you should only rotate about the Z axis. If you need to adjust the X, Y and Z then the follow-up of target are not aligned with the plane. You can get a better alignment of selection of the points until you get the plane to match the drop target. Then after you create the plan, you must check the track to ensure that it holds for it together. If it doesn't hold or stick to the surface and then you have not selected the right drawpoints or you do not have a good track.

  You also said that it was of arial images. If it was a quad copter with a GoPro or another camera action then the film is probably warped. This will result to problems when you perform the Camera Tracking in AE AE cameras have perfect lenses. The lens distortion will shake track and cause extreme problems like the object is close to the border of the frame. The solution to this problem is to remove the lens distortion. GoPro Studio has the ability to remove a fisheye and it does a pretty good job. My solution to this kind of problem is to export images from the GoPro uncorrected as a sequence of images can use Lightroom to eliminate lens distortion using their lenses profiles or profiles that I created using a graph of the lens distortion.

  Here are the steps to replace the subject perfect using AE camera tracker.

  1. Plan your photos with limits of perspective and examined the Parallax
  2. Carefully the film suddenly
  3. Necessary to make plates own so you can remove objects from the scene
  4. Choose the photo you want to use and define your best estimate in points, then add a few images to each so that you can cut out the changes
  5. Export images, so you can request the correction of the objective
  6. Camera follow your film corrected
  7. Define an original plan and the ground and make sure that it is good in all of the shooting by adding a new layer of 3D solid from the scene, turning 90 degrees in X and seeing if she keeps track with the scene (by adding a grid to that solid will help)
  8. Choose track points on the surface you want to replace and add a solid with camera Tracker
  9. Check to make sure that this solid tracks perfectly
  10. Turn the replacement solid so that the horizontal or vertical edges line up with the surface you want to replace.
  11. Find the frame where the surface you want to replace is also great that it'll be in the loop and export that frame to Photoshop for editing
  12. Make your editing, cut or crop the PSD so that only the visible surface or give yourself some room so that you can roto edges
  13. Replace solid with the replacement surface in the model
  14. Correction of distortion to the replacement surface that are necessary because of the perspective Exchange or parallax with corners tools

  That's basically it if you use a fixed image. If you do the replacement of surface using another section of the video that moves so you would use a projection map, but that's another topic.

  I hope this helps. Looks like when you resorted the track camera that something had changed. If you have a track with success once, then you should be able to do it again if you start from scratch with a model that has been created by selecting the clip in your project Panel new comp from selection. As I said earlier, if there is no distortion of the important goal, it is better to delete this before, then cut the shooting, what can be done in the film window, before you start.

  If you want more help then post the shot or give us more details about what you want to do.

• Low power mode will affect the performance of the camera?

  I take my iPhone 6 on a trip backpack my camera. I intend to put the phone in airplane mode and I wonder if I should also set low power mode. If I put it in low power mode, it will reduce the performance of the camera?

  I suggest that you test this configuration by yourself before you leave.

  You can also consider taking the external battery back up like those manufactured by mophie.

• Will expects G4 most camera update compromised quality for performance?

  Admins are speaking of this upcoming update. Will this affect the quality of the photos and videos much?

  I mean tweaking the camera can translate into a poor stabilization of the videos. Is this possible?

  Ah, what the message from Matt.

  Well, I guess it depends on what you are experiencing. If your device stops 5 minutes due to heating, and you can take steps to reduce the heat by lowering quality or disable image stabilization, then you must decide if you want to short videos or long videos.

  It's like consumption of gasoline in a car... go very fast, stop and go with a heavy foot, use more gas more quickly, or go slow and steady and go to a greater distance.

  Matt has been offering suggestions for people with problems.

  We don't know what any update can provide - whether or not the techniques are used. That is until the developers come up with.

• Game for the HARD Y510p Lenovo Ultrabay drive performance

  Hey all, I just installed a 2 to Samsung SpinPoint drive via Ultrabay caddy in my Y510p. I was able to install my games on it without any problem, but when I started to play Alien isolation, the game was extremely laggy. I was wondering if it was a problem can be fixed with the graphics settings, or if its just hard to get the quality of play in the ultrabay. If someone could help me, it would be much appreciated.

  In fact, I don't know why, but when I restarted my computer, the game began to run normally again. I don't know how it happened, but I'm not complaining! Thanks for your comments

• I use Lightroom CC and one of my cameras is a Canon SX-50HS. Why Lightroom importing crop images? It does not perform this task for any image created on other devices.

  Automatically import the cultures these images, Yes to develop I can uncrop them but I would have preferred that the images come shot.

  You can set this camera to various Image Ratio - 1:1, 5:4, 4:3, 3:2, 16:9

  You set your ratio desired for JPG images.

  Lightroom imports the image of full 4000 x 3000 sensor size (4:3) and applies to the culture according to 'Camera' Image ratio (16:9, perhaps).

  Set camera Image ratio 4:3 in the menu of the camera and you have the problem of harvest.

• Weak performance of the digital camera of the light

  
  

  Usually, the opening is narrow when you zoom in further on the image. Cameras with a wide opening available long-range zoom are more expensive and have large diameter lenses. For example, the DSC-RX10 is a style prosumer DSLR camera that has available f2.8 to about of 8 x zoom.

  The basis of your criteria, the DSC-WX300 is the best option. You should also consider to stretch your budget and look at the DSC-RX100M2. This model has a sensor of 1 ", opening f1.8 wide angle, HDR and WiFi capabilities.

  If my post answered your question, please mark it as "accept as a Solution.

• FPS Y510P Lenovo problem

  Hello guys, Im using Lenovo Y510P with the following specifications:

  • 4th generation Intel Core i7-4700MQ / 16 GB RAM / Full HD 1080 p 1920 x 1080/1 TB HDD + 24 GB SSD / Dual SLI NVidia GT750M 2 GB / Bluetooth / Cam

  I got this laptop from my brother, and I use it to play in Counter Strike Global Offensive (CSGO) game. I saw this laptop do about 250fps in most of the maps from CS GO, but still I get only 124fps in the cards with the settings lowest. Anyone of you guys you will suggest tips to solve this problem?

  Thanks in advance

  EDIT: Installation of the OS on the 24 GB SSD does affect performance of game somehow? My SSD has been damaged and there are currently no SSD inside. It is only the HARD drive.

  
  

• MBP early 2011 camera does not

  Hello

  I have tried everything mentioned in this thread, like:

  1. kill the process of VCDAssistant (I might have misspelled earlier)
  2. Reset the SMC
  3. Drain/battery AC only use
  4. Create a new user
  5. Perform a clean installation
  6. Use a third-party software

  Nothing I've tried looking at the camera. Does anyone have any other suggestions?

  Take your MBP for a Genius Bar for some tests...

  Mine is end of 2011 and I am happy that I am and control me.

• Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also used faster then the previous version.

  Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also faster, then the previous version, use 6s with 64 GB

  Hello naqvi65,

  I see that you have several problems with your iPhone after updating to the latest version of iOS. These issues include problems of performance, inability to find contacts at a Spotlight search, problems with enforcement camera freeze after the launch and the battery discharge more quickly than what you are accustomed. I want to help you find a solution for these questions!

  To answer your questions with performance and your inability to find contacts, we will try to restart your iPhone first to see if the problems persist. Take a look at this resource for more information:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Take a look at this Web site using your photo app troubleshooting:
  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  To keep an eye on your battery use, take a look at the information here:
  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To help maximize your battery performance, this site has some good tips for iOS devices:
  Batteries - maximize Performance - Apple

  See you soon!

• Reinstall 10.7.5 to help performance

  Late 2009 iMac 10.6.1 when new, now running 10.7.5 with 8 GB of memory and 2 TB of disk running

  My Mac worked slowly for a while. Check memory, CPU etc. in the activity monitor shows no reason for this.

  I want to reinstall the OS X 10.7.5 menu utilities in OS X, but I have no USB or disk with 10.7 on it.

  Given a stage to try and BONE cleaning is to wipe the drive, then I suppose I'll have 10.7 on some media.

  I believe that the steps would be:

  1. all save, deauthorise apps

  2 restart the Mac in recovery mode

  3 erase/format the disc extended journaled format

  4 reinstall OS X

  Who would bring back me to 10.6.1 that came with the Mac, so I have to upgrade to 10.6.8 then 10.7 as soon as I got it on a media, and then work my back to 10.7.5

  So, how I 10.7 or y at - it an easier way to get my Mac running as it was when new?

  Thank you.

  Frank.

  With 8 GB of memory and a HD 2 to (assuming that it has enough free space available on it) and your Mac must perform well. Mac in general do not need 'clean up', but they have a third-party software installed that can cause performance problems. Before you go to the backup, erase, re - install, upgrade to Lion road you can download and run EtreCheck and post the contents of his report here. Can anyone identify if there is a probable cause of software to your problem:

  http://etrecheck.com/