Performance wireless on Satellite P200 problem

Hello world

I decided to join this community because I'm looking to solve a pb on my WiFi connection.
Last week, I bought a Satellite P200.
OS: Vista
Wireless LAN: Atheros AR5007EG

Everything works, but I have a performance problem with the connection.

This computer is connected to a network of personnel via a linksys WRT54G.
I have 3 computers (Medion desktop plus 2 other laptops). These 3 computers remains stuck between 3 (WiFi) and 4 (ethernet) Mbit/s on the internet connection.

The Toshiba receives between 300 and 500 Kbps. It is also very long to detect my network.
If I connect it by Ethernet: 4 Mbps

Here is a list of different things I tested:
-updated drivers
-test without any key secure over Wifi (WPA - PSK)
-disconnect avast (or Norton)
-change the MTU
-Try a netsh command
-change of frequency of the signal.

All ping tests are perfect: it gives exactly the same results as the Ethernet connection. the pb happens only on internet surfing.
I also try the recovery but the pb is already there when I bought it.

If someone has a new idea or a trial, it will be great.
Thank for your attention and sorry for my English (I don't practice for a long time: o)))

I know Vista's problems if you use the WiFi network.
This Microsoft article describes the various problems and provides the patch.
http://support.Microsoft.com/default.aspx/KB/932063

Tags: Toshiba

Similar Questions

  • Satellite P200 - problem with the use of disk HARD original as external drive

    I've been pulling on my hair for a month now and could do with help

    I have a Satellite P200 series PC laptop and have recently updated from the 200 GB for a pair or 320 GB HARD drive. No problem

    The question I have is that the old drive of 200 GB system I am unable to use it in any other machine or according to and external storage device.
    The original secondary disc works fine few matter where I use it... (In my PS3 at the moment)

    When I install the orgional system drive in my laptop and rebuild windows it it still works 100%.
    Hance a good work of 200 GB of HARD drive.
    Take it out and serve in another machine of storage that it won't - boot all I get is cyclic redundancy errors

    I formatted, low level run endless disk tools
    WD test came back with diagnostics Test::Read 11 - cable sector error!

    Even as a drive on the original laptop is the same

    All ideas taken with gratitude that I don't want to lose a good 200 GB HARD drive

    Thank you very much
    Roger

    Hello!

    The external box is maybe defective, because you said that the HARD drive works in your laptop and the PS3 without problem.
    You can test the HARD drive in another external case?

    WD test unknown to me but I always use the Drive Fitness Test:
    http://www.HitachiGST.com/HDD/support/download.htm#DFT
    With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. You can then the HARD drive.
    On the same site is a user's guide if you want to know more.

    Good bye

  • Installing the WLan driver resolved connection WLan on Satellite P200 problems

    Finally after 2 days of useless trying to get my wireless card to recognize my home network I came across the solution. I have a satellite P200 which used the AtherosAR5007EG adapter.

    If you return to the Windows XP 32-bit drivers it works like a charm. Installed the new driver and it found my network right away, and I could get on the internet.

    Hello

    You are an owner of the new P200? It of a great book I like the design
    Anyway thanks for the great info and I wonder that a driver XP WLan works with Vista OS

    Good bye

  • Satellite P200: Problem installing XP Power Saver - SOLUTION

    Hello

    For people who were having trouble installing the utility of Toshiba Power Saver on Windows XP, I found a solution for you.

    Download the XP drivers for model Satellite P300 energy saving and you will absolutely find, just make sure you have the driver for the installed first P200 energy saver!

    I hope this helps you solve your problems

    Yours,
    Neo-tech

    That s a nice info.
    Thanks for sharing this with us.

    Good bye

  • Satellite P200 - unexplained MIDI file problem message

    Satellite P200 - without any sound media playing I regularly get the pdf file following poster "If you have problems with playback MIDI files please perform following steps.»

    I have no problem with the sound, DVD, MP3 etc.
    No explanation and how can I stop it?

    I always put t understand when this message appears.
    Can you please be more detailed description of the problem?

  • Satellite Pro M30 Performance wireless

    Hi everibody,.

    I informed my card wireless by Satellite Pro M30 a decrease in its performance after having disconnected from the grid. I have notified in applications such as Internet Explorer and MSN 7.5. I Don t know where he can be the cause of this problem, someone knows something or has the same problem please answer the message so that we can share the experience.

    Greetings

    Ignacio (Spain)

    Hello

    When your device is running on battery power, please check the properties of the WLAN card and on the Advanced tab, you'll find the power management option. Try putting it at the highest level it.

    In power utility management also define usage of CPU for maximum performance option.

  • Satellite P200 - 1 K 9 and performance issue

    I hope IM this ad in the right area...

    Hello

    I have a Satellite P200 - 1 K 9 with the following specifications:

    Intel Core 2 Duo T7700 @ 2.40 GHz CPU
    3 GB RAM
    32 bit
    Note Windows experience 4.8

    ATI Mobility Radeon HD 2600 map graphic and one
    HD sound card...

    My problem is that since I bought my laptop about 7-8 months ago slowed down the performance. Of course, since then I had filled my hard drive (partition) with the media and understand that this is at the expense of the performance of the system. However, since this grateful I released a lot of disk space. I have 40 GB free on my C: and 90 GB free on my D:. Total, shared capacity is 250 GB (125/125).

    Basically, while being largely ignorant of the technical questions, laptops and technology altogether, the way I noticed the inability of systems to "return" to its original factory running (which, I might add, I was very impressed by) is when it comes to games. Football Manager 2009, for example running very slowly. I had a peek in the Task Manager, because I play the game in a window, and the CPU usage works 100%, although I'm sure the culmination of the individual tasks and Applications is not equivalent to that (maybe there is a program hidden Hogging my CPU speed?). Call of Duty 4, which took place on medium-high graphics settings when the laptop was new, now struggles on the lower graph and the sound settings, without that there is a problem with internet connectivity. In addition, (for reference, I m not not the game breath) Battlefield 2, which is about 3-4 years of age very slowly also works. He ran too extremely fast, on the highest graphics settings when the laptop was brand new.

    Basically, what I want to do, is to return the system to its original performance. It is always too slow when two hard drives were full of games and media. Now, despite the withdrawal of many of them, the system works like a sloth.

    Means I ve done to solve performance problems are: disk defrag, disk clean up, error checking, virus scan (with Kaspersky), scanning of spyware (with PC tools Spyware Doctor), deleted the old files with CCleaner and erased files not deleted with a program called eraser... As well as the release of about 50% of the disk space.

    Add to that, I ve noticed performance was much more when I first turn on the laptop and the sides of it n t had the chance to become hot. I understand what is normal, and he did before when the laptop was new and was operating at optimum performance, but perhaps I have an overheating problem? I'll let you know what is the temperature, but I put just t know.

    I hesitate to return the system to its factory settings and if necessary I'll take to a computer store, if there is something they can do. But in the meantime I d like to listen to any advice on general issues that I face, and possible solutions to my problem.

    Thank you very much.

    The problem with Windows is that it becomes slower and slower that you operate.

    When the devices and programs are installed, they increase the size of the registry, activate the Services, add resident DLLS and drivers, slow down the file system by adding thousands of files. As well, the operating system can get damaged after some time due to the loss of power and software poorly written.
    Even if you use CCleaner and other utilities and uninstall several programs, it is never as fast as a fresh installation of windows. Uninstalling programs rarely remove the program completely 100%.

    The antivirus can have a huge effect on performance, that's why the system runs great when the image of the plant is installed (which has usually no anti-virus).

    So basically if you want the system making a lot once again, you must back up your data and perform the recovery. I myself do it once a year to restore performance.

  • Graphics problems in World of Warcraft on Satellite P200-123

    I bought a Satellite P200-123 to surf the net, play and for general use. I have read many reviews and chose the p200-123 because of his good grades. I play wow on a daily basis. World of Warcraft was an extension called burning crusade that came out a couple of years. When the expansion of BC the grx will all mess. Its as if there is a new effect of grx etc which does not agree with the toshiba range drivers. I get lots of polygons on the screen after being in the Burning Crusade expansion. I thought the grx was defective, so I exchanged it. Once again when I get the new laptop at home it happened again. It is a driver problem that it happens to the expansion of the BC. Ive tested it on other games and everything works fine. I want to know is we're going to have a bad selection of drviers or will they get updated.

    http://I219.Photobucket.com/albums/cc215/maltonbranch/WoWScrnShot_033108_213654.jpg

    To solve this problem, I have to change the resolution, then back to the setting I use. problems with polygons etc seems to leave for 5 minutes then the pips apear. I thought he could heat or a damaged GPU. But getting a laptop brand new just to do it again shows me his non-defective material and a driver problem.

    Ive posted this on world of warcraft forums and aparantly its a problem with the ATI driver toshiba shut down. Bottom line, I want to know if the drivers will be updated and not just old ATI modded those of toshiba. I feel ripped off the coast. In all my years of owning PCs and laptops, I never felt so disappointed by a company in terms of software support.

    Hello

    I understand you completely, especially when you play with a few new engine that requires pilots who work quite at 100%.

    Maybe you should check some 3rd third-party drivers.

    This driver have been adjusted for mobile systems, so when you try these, your problem should go away and performance are expected to increase a little.

    Welcome and good luck

  • Network drivers required for Satellite P200 13z PSPB0 Win XP wireless

    Hi guys,.

    There was vista home installed on Toshiba satellite P200-13z (PSPB0). I made mistake by installing vista first hard disk half and then installed xp pro on the rest of the hard drive. Now my phone won't show me dual boot menu

    On my C - Vista drive

    On my drive D - XP

    When I start my laptop, it just goes straight path to XP, so I'm not able to choose vista on my laptop even, it's there.

    XP took the other driver except them Chicony usb 2.0 cam, PCI Device, video controller and the network driver

    I looked on the download site of Toshiba and only able to find Realtek RTL8139/810 x player Lan, which I installed it, but still, my wireless network does not.

    Now I don't know what network driver I required to connect to internet through wireless (Wi - Fi) for my XP operating system

    ADV me please this as other drivers I need to download and the place where, so I can connect to internet with wifi.

    .

    > When I start my laptop, it just goes straight path to XP, so I'm not able to choose vista on my laptop even, it's there.

    I had the same problem after installing Win XP on my laptop.
    The fact is that Win XP destroyed the Vista Boot Manager and so you can not choose the Vista operating system.
    But you can fix it using the MS Vista disc (not recovery disc). Simply start the Vista disc and choose the repair option.
    This will solve this problem.

    But after that you will not be able to start Win XP.
    The solution; go to Vista, install freetool called EasyBCD and include the Win XP operating system and partition for the Vista Boot Manager.
    That helped to me.

    Regarding the WiFi network:
    The laptop uses the ATHEROS 802. 11B / G WLan card.
    See this page:
    http://APS2.toshiba-tro.de/WLAN/?page=downloads

    Hope I could help you

  • Satellite P200-1EE PSPB6E: problem of battery and Webcam

    Hiya People,

    New on the Toshiba Forums here and stuck on a problem I have with this laptop.
    I have a Satellite P200-1EE model number: PSPB6E 0GM028EN. The election House of Uni a few days ago my refuses to laptop to turn on the laptop on and happening only when I put a Power cable in.

    I took out the battery cleaned with a can of Air and put it again and it worked but the next time I did nothing happened.
    Strange thing is that, once it is running, and I take the power wire, it works fine.

    2nd problem is the software integrated Webcam won't work for me. Sometimes, and when I restarted the laptop it works fine again.
    I tried to reinstall the driver but it gives warning that the newest is already installed on my laptop.
    Am I right in thinking that its due to the new version?

    Any help or Suggestions are appreciated and thanks in advance

    Seamus

    > Laptop on and lights up only when I put a power cable. I took out the battery cleaned with a can of Air and put it again and it worked but the next time I did nothing happened. Strange thing is that, once it is running, and I take the power wire, it works fine.

    It is maybe something wrong with the battery of laptops of s?
    How old is your laptop? Guarantee is valid?

    As far as I know, the guarantee covers the battery for one year. Then maybe you should ask and ASP in your country for a control? Maybe the battery doesn't work as it should.

    > 2nd problem is the software integrated Webcam won't work for me. Sometimes, and when I restarted the laptop it works fine again. I tried to reinstall the driver but it gives warning that the newest is already installed on my laptop. Am I right in thinking that its due to the new version?

    I n t have a solution to deliver you but I assume that it s associated with the software/driver of webcam.
    You should visit the European driver Toshiba page from time to time and need to check if an update is available.

    Good luck

  • Weird display on my Satellite P200 - 1 g 8 problem

    I bought my new laptop Satellite P200 - 1 g 8. I had some problems with the display cable.
    After that switch on and work for a few hours, the display is corrupted, or you can say distort.
    It is very difficult to explain in words. But when I restart or switch users, it starts, works very well and then again after 1-2 hours the screen suddenly corrupts.

    I've updated the drivers and Vista too, but I still have this problem. This problem comes then it distorts everything on the screen gave nothing.
    It is not overheating issue.

    If someone knows about it or anyone can help with this, thanks in advance.

    Thank you
    Cecile

    Hello

    To be honest, it is not easy to understand exactly what is happening. All you can do is install Vista with delivered recovery DVDs. This image has been tested and it should work well. If the problem persists, it must be checked by the service.

    Sorry, but I don't see another solution for you. As I have written before that it is not easy to understand exactly what is happening and what it looks like.

    This occurs if you use a specific application?

  • Satellite P200 will not connect to wireless internet

    I have a Toshiba Satellite P200-143.
    I changed my internet provider, but the Toshiba will connect to the internet only when the blue ethernet cable is connected.

    Yet my laptop marry connects easily.
    I'll start, connect to identify the wireless network and tap on connect, it tries, but says connect with limited access.

    Any ideas plse.

    Hello

    (1) have you activated the WLan card?
    To activate the Wlan you must pass the antenna WLan switch on IT (LED should Flash) and you must use the FN + F8 key.

    (2) did you check the WLan configuration?
    -SID, right encryption settings, good filtering by MAC address, good TCP/IP settings on the right

    (3) have you tried to update the driver WLan?

    (4) don't you update the BIOS?

    If this is not the case, check this box!

  • Graphic problem on Satellite P200-13Z

    Hello

    Satellite P200-13z running 32-bit vista - intel graphics software displays + does not work because of insufficient resources + other checks indicate that the chip has no allocated memory.
    Machine runs Ok'ish on the LCD screen in mode VGA base but of course, for many programs, it is no good.

    Version 1.7, nothing in there to allocate memory for the graphics chip - as in other systems with built-in BIOS system memory for graphics.

    System has 1 GB of ram - updated 2GB with no difference.

    When I bought the laptop H/d has been deleted for reasons of safety, replaced by the new HD & reinstalled vista from a recovery P200D disk then download specific files for this machine from the Download Center, am I missing a file important?

    How do I allocate memory of the chip or do I have a defective chip / / cpu / / mb or other?

    You can not install image of P200D on P200. Both models have completely different hardware platforms. Images of recovery are individual and model specific images.
    If you want to play a little bit and test if you get it working it's Ok, but you also expect that some problems will occur.
    All with images is not so simply as you think.
    Toshiba has designed images for the use of certain models only. It will be too easy to buy a laptop and use some images on different specifications.
    I mean you pay a license and install on 10 laptops. You understand what I mean?

    If you do not have original disk recovery facilities use bare BONES Setup with disk Microsoft facilities and subsequently install all necessary drivers, tools and utilities download page following the link you have posted here. You will see that everything will work well.

  • Satellite P200 - 14 H - problem with the software after reinstalling Vista whindows

    I have a Satellite P200 - 14 H, who bought systems Activ of Romania. I got a Toshiba DVD with an image pre-configured Windows and my driver's license windows vista Home premium. After several blue screens windows crashed after 5 days. It was a software problem. I am a network administrator and I need several virtual machines Linux vmware server Windows.

    The DVD provided with the laptop is not really suited to my needs to reinstall windows because it throws my entire hard drive and is not an option. I took a friend a DVD windows vista Home premium and using my key from the sticker on the back of my laptop I reinstalled win without deleting all of the hard drive but only the partition c. I downloaded all the drivers of your site even if I found them really hard (model PSPB6E because that model PSPB6E I don't find it anywhere) everything is good except that "Flash Cards Support Utility" and «» Hardware Setup' give me the following error: "serial number is invalid '. I don't know what to do to be able to use the function keys I knew which are installed by 'Flash Cards Support utility'.

    If it is not good that I did give me another solution that does not need to wipe entire HARD drive, but only the C drive and use the DVD that you have provided or give me access to some place to be able to download all the drivers and software that can be found on the original DVD (those above and to burn DVD and Norton internet security center and so on)

    Thank you very much and please be so kind to give me a solution quickly because I really need this computer and I am unable to use it.

    Hi Adrian

    I'll try to clarify a few things;
    First the drivers for Satellite P200 - 14 H PSPB6E series are placed on the page of Toshiba Europe and it of really not difficult to find.
    Secondly the Vista serial key, which is located on the bottom of the unit cannot be used with another copy of Vista OS! This will not work!

    You have installed the operating system Vista from the CD to friends, but you used a serial key that does not match with the Vista on CD to friends! As a result, you get the message error "serial number is invalid!"
    The utility of Flash cards is required to use the keys FN under Win Vista. It visually shows the use of the FN button.

    I would recommend another way of installation
    First, you must use the DCD from Toshiba recovery. Back up your data first!
    Then after installing the OS, create a new partition and install your favorite OS (Linux, XP, etc.)

    If you n t to use the Toshiba recovery but CD the original Microsoft CD Vista then you need to use the original series OS key that belongs to the MS Vista CD.

    Good bye

  • Installation of Satellite P200-144 recovery disk problem

    Model Satellite P200-144 PSPBGE

    Hi all

    Today I received a 2nd recovery disk mail via UPS directly at Arvato distribution GmbH

    Yet once there not in the exact same place as the 1st disk that I received but returned and they replaced.

    My original recovery disk was lost around the House 3 months back, which I am now myself kicking on.
    Reason for restoring factory default settings was that I wanted my pc to be clean like a cell phone factory default as it was full of registry errors.

    In any case on the problem, after that 67% of image recovery happens with the corrupted file, here is the installation proc.

    Try to rename all the letters of potential left to HDD0
    Try to rename all the letters of potential left on HDD1

    Microsoft DiskPart version 6.0.6000

    Copyright (C) 1997-2007 Microsoft Corporation.

    On computer: MINWINPC

    Disk 0 is now the selected disk

    DiskPart succeeded in erasing the disc

    DiskPart succeeded in creating the specified partition

    Partition 1 is now the selected partition

    DiskPart successfully assigned the letter of the drive on the mountpoint.

    100 percent complete

    DiskPart successfully formatted ther volume

    DiskPart succeeded in creating the specified partition

    Partition 2 is now the selected partition

    DiskPart successfully assigned the drive letter or mount point

    100 percent complete

    DiskPart successfully formatted ther volume

    DiskPart marked the current partition as active.

    Define RECO-info-guid = 4D2AE583-8FD5-4D7D-AE07-B098C1CBA1B5
    RECO-info-imagecount value = 2
    define the RECO-info-partnumber = 1
    RECO-info-numsplit value = 5
    RECO-info-bootindex value = 0

    L ' ImageX for Windows tool

    Copyright (C) Microsoft Corp. 1981-2005 all rights reserved.

    Progress: 67% 06:44 minutes

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    ResourceExtractToFileByStruct: (seq. 50)-> Uncompress or WimCopyFileEx failed

    [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    Error image restoration.

    The file or directory is corrupted and unreadable.

    Error: ImageX could not apply E:\05021XSP.swm Index 2 Weird Vista in C:!

    Is there a reverse this problem?
    My thoughs is that the image is corrupt.

    The error that you declare, is a fault with the Vista disk image cannot be applied to the hard drive.

    Which you used 2 recovery discs of different product, which would indicate that there is not support for product recovery but a defective hard drive, possibly bad sectors on the hard disk.

    If the laptop is in it duration of warranty, then give Toshiba a call for the book on deposit for a repair of the equipment.

    0844 847 8944

Maybe you are looking for

  • Duplicate applications

    Hello! Today, my younger brother created several doubles all OS X applications (e.g. safari, calendar, notes, etc.). I went into recovery mode to reset the password, run SMC, safe mode... etc but nothing works. Is - this problem is due to malware in

  • Securebill virus

    I have the virus Securebill, Inc. - I read online here, how to get rid of him, but the virus does not allow me access to all of the programs - the screen is white, except for the damnable windows and messages of this virus - suggestions?

  • 'Please wait until that the current program is finished uninstalling or change'

    Im trying to uninstall a program and when I click on uninstall it says: "Please wait unti the current program is finshed uninsatlling or that" it says always that what I'm doing.

  • What is a free screen recorder well let's you zoom in on certain parts of the screen?

    Free screen with Zoom recorder What is a free screen recorder well let's you zoom in on certain parts of the screen?

  • Buy software?

    I have been using creative cloud for about 2 years now and I love it. I checked to see if I'm able to buy the software, because over time, it would be cheaper. I saw no option for that so I wanted to know first if possible and then how it would be. T