Performance wise, it is sensible to switch to iPad Air starting from an iPad 3?

Hello world

I'm looking for a replacement for the iPad 3 (Wifi, 32GB) that my family uses for simple tasks (surfing, netflix, e-mail).

I thought an Air 32 GB Wifi iPad, which should be much faster. But now, I saw that this model has only 1 GB of RAM, just like the iPad 3.

Do you still think the air is considerably faster than the 3? The 3 is really slow behavin now with iOS 9 and not so much fun to use anymore.

It would be good to hear your experiences.

best,

GEB

The first generation iPad Air has a faster, more powerful CPU A7.

The GPU more powerful and faster, too, that the iPad 3.

It is also lighter.

Those really has the only differences in the important features from the iPad 3.

Tags: iPad

Similar Questions

  • Insert vs Create | Performance wise

    Hello

    Is there a difference in performance between the Insert and create.

    That is to say simply making CREATE TABLE AS [SOME SELECT QUERY]
    OR
    First create a blank table and then by inserted into the Table [SOME SELECT QUERY]

    These are the same two performance wise?

    for example:
    Create table t1 as
    select a.*,b.*
    from
    a,b
    where
    a.col = b.col;
    
    AND  
    
    Create table t1 as
    select a.*,b.*
    from
    a,b
    where
    1=2 ;  --- one time creation
    
    Insert into t1
    select a.*,b.*
    from
    a,b
    where
    a.col = b.col;
    Concerning
    Aerts

    AB312062 wrote:
    Thank you Tubby.

    What it means

    DEC with nologging

    is the same as

    Insert with append and nologging?

    Thank you
    Aerts

    Which is quite clearly answered in the link I posted for you at the origin.

    See you soon,.

  • I m problem that my computer automatically turns off (is not closed correctly at the time of the switches) and when I start it gives message that windows do not close properly seeded.

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Previously I was using WIndow Vista Home Premium but recently I installed Windows Vista Ultimate.I m having problem my computer turns off automatically (is not closed correctly at the time of the switches) and when I start it gives message that windows do not close properly seeded.

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------
    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    information on errors such as STOP and information such as IRQL_NOT_LESS_OR_EQUAL codes or
    PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    Displays information on all the "crash" of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
    are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • How to switch my subscription creative cloud from my old computer to a new one?

    How to switch my subscription creative cloud from my old computer to a new one?

    Hi loll0p999

    You can install Creative Cloud products on two machines using a single subscription.

    Please see the FAQ on creative cloud. In the getting started section, you can also see this information.

    http://www.Adobe.com/in/products/creativecloud/FAQ.html

    However, you can disable the subscription on existing machine and reactivate the second machine to save once the installation instance.

    Please see following article on how to enable or disable the creative cloud.

    http://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

    I hope this helps.

    Please let me know if you have any further questions.

    Kind regards

    Sumit Singh

  • switching pro iPad is not iTunes Store

    On my iPad 2 I am able to switch between the UK store and the store US I have 2 different accounts. He acknowledges that I signed with a different ID and tells me that she needs to change stores. However, the iPad Pro won't store and continues to tell me that I was incorrect in newspaper. Any ideas?

    All resolved. I had to clear all the settings, and then create a new ID in the store that I couldn't enter. You must create the ID and agree that the terms, but then cancel the ID set up at this moment there. Then he gives access to two stores and allows me to spend.

  • I have an acer aspire 10 switch that will not start.

    The screen displays a circle with the word reboot but nothing happens how do you reset it? I tried out but he returned with same message is restarted.

    frankubon wrote:

    The screen displays a circle with the word reboot but nothing happens how do you reset it? I tried out but he returned with same message is restarted.

    When you do a normal click of the sthe power button switch goes to sleep rather than turn them off. Try a press and for ten seconds or more, wait a few seconds and try again to turn on.

  • Aspire Switch 10 does not start - need assistance to access recovery

    While improving to WIn10, the process failed at around 12% and restarted at a blue screen that says

    --->

    Recovery

    Your PC needs to be repaired

    A required device is not connected or is not accessible.

    .......

    .....

    Press the windows key for UEFI firmware settings.

    <>

    In the bios, I set boot order to USB HDD first and secure boot disabled. I put a Win8.1 USB thumbdrive made in Rufus... when it starts, the USB flashes because it is accessible, but it does just the same blue screen mentioned above.

    Help, please

    first try keys Alt + F10 at startup and check if you are able to enter in recovery.

    If this is not the case, Switch 10 use 8.1 Windows Home or with Bing, you should check with the exact model or by looking at the labels on the box.

    SW5 - xxx

    If it's the Home x 86 version:

    http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

    Use the download tool and download the iso of the home version and then burn with Rufus as TPG and FAT32.

    or you can try a clean install of windows 10

    http://community.Acer.com/T5/knowledge-base/Windows-10-installation-recovery-media-creation-and-use/...

    or buy the original Acer recovery media:

    Acer recovery media
    WE:
    http://us-store.Acer.com/eRecovery/RCD/

    Canada:
    http://Caen-store.Acer.com/eRecovery/RCD/

    If you live outside the United States and the Canada, you must call/email your regional Acer support service:
    http://www.Acer.com/worldwide/support/

  • [3750 x] switch was able to start on the new image

    Hello

    I have updated the firmware of my switches 3750 x (19 switches in the Group 8 battery) with the new version. But 2 switches with a stack of 3 cannot take the last version. They are the same model, I do not understand why they cannot start on the new image.

    New version: 15.0 (2) SE7

    Old version: 12.2 (58) SE2

    Switches information

    17 switches that works

    WS-C3750X-24 15.0 (2) SE7 C3750E-UNIVERSALK9-M

    Revision number of the model: A0
    Motherboard revision number: A0
    Model number: WS-C3750X-24 t-S

    Of the 2Switches that does not work

    WS-C3750X-24 12.2 SE2 (58) C3750E-UNIVERSALK9-M

    Revision number of the model: A0
    Motherboard revision number: C0
    Model number: WS-C3750X-24 t-S

    It's the only different, I found between the 2 switches with all other switches,

    Loading images

    In step 1 it load the image, but it will not start and in the end, it loads the old image and boot top.

    Loading ' flash: c3750e-universalk9 - mz.150 - 2.SE7.bin "... @.

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    @@@@@@@@@@...

    File "flash: c3750e-universalk9 - mz.150 - 2.SE7.bin ' unzipped and installed, point of entry: 0 x 3000
    execution of...

    "Loading Flash:/c3750e-universalk9-mz.122-58.SE2.bin"...@@@ ".

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    @@@@@@@@@@...

    The switch that has the latest version can not see the other 2 stacks. At the moment the only solution I found is the downgrade of the switch with version 15.

    Kind regards

    The latest version that starts with success on this device is 15.0 (1) SE3

    The 15.0 (2) * or 15.2. * the images do not start and lead the suspended device during the @ as stated above.

    So, it seems than Cisco already broken that in 2012. I almost can't believe it.

  • Can I switch my current PS program from PC to Mac?

    I am currently trying to switch my system from PC to Mac. My question is if I can switch my programs.

    Yes, you can exchange your serial number for the Windows platform to the Mac platform.

    Let me know if you need assistance in exchanging the serial number.

    ~ UL

  • How to remove a host from switch if distributed dvswitch removed from the host?

    Hello

    If someone removed from the distributed switch vClient connected directly to the esx host, how to delete this host of the distributed switch configuration?

    There is no option to add this host to distributed switch.

    Any thoughts?

    Thank you

    Suresh.

    You can try disconnecting the host, then removing vcenter?

  • I switch my laptop hard drive from FAT32 to NTFS via a command prompt and now cannot read the disc.

    convert my portable hard drive from FAT32 to NTFS by using the command line.
    After conversion, my pc can not read my laptop hard drive, I check the computer, my protable hd management 1175 GB, my drive only of 500 GB hard probatle, be how to 1175bg? can someone help me? now I can't play my disc hard protable.

    http://img217.imageshack.us/img217/4338/002ilq.jpg

    Check this box:

    http://www.tech-FAQ.com/how-to-convert-FAT32-to-NTFS.html

  • Power switch T30 does not start the computer

    New motherboard installed by Lenovo's Mexico on a guarantee out of T30. Machine will not start. Any ideas where to start (outside the machine back for another long stay of the shipment) would be appreciated. Not my machine. Benefit for a friend.

    ajkula66 wrote:

    You can turn on with one of your A3x keyboards... less than what I remember.

    Good luck.

    Thank you. I stuck an A31 keyboard on it and it turned on! A took a look on the original keyboard. Jumped the bezel around the button cell and found the power button was missing the rubber dome which lies beneath the button. A keyboard A31 cannibalized and it is stuck in the keyboard T30. Major PITA but a few minutes of fumbling had done. Computer works fine.

    I looked inside the frame, but did not find the old piece of rubber. Chalked it up to the mysterious things that happen in transit. The owner swears that the power button was functioning before the swap to the mobo. In any case, thanks for the tip on the keyboard.

  • the user switched on macbook air, cannot access serial number

    Due to some problems with my computer, I need to create another user on my MacBook Air. After that, I can't in my cloud of Adobe creative. He asked my serial number, which I can't seem to locate in previous emails or elsewhere.

    CC does not have a serial number, it uses your Adobe ID to validate registration

    Using this new user account...

    Your subscription to cloud shows correctly on your account page?

    https://www.adobe.com/account.html for subscriptions on your page from Adobe

    If you have more than one email, you will be sure that you use the right Adobe ID?

    .

    If Yes

    Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

    -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

    .

    If no

    This is an open forum, Adobe support... you need Adobe personnel to help

    Adobe contact information - http://helpx.adobe.com/contact.html

    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

    -Select your product and what you need help with

    -Click on the blue box "still need help? Contact us. "

  • I want to switch to the STANDARD DESIGN from my old computer to a new computer, it is a volume license version, how do I set up?

    Back in 2011, I bought Adobe standard of design, but I'm unable to transfer to my new computer. I tried to disable Photoshop on the old computer, and I had to let it run all night. Now I can't use the programs on the old computer, but when I try and active on my new computer it tells me that the product is being used elsewhere. I asked Adobe to help - and they sent me here.

    Volume licensing
    ----------------

    http://helpx.Adobe.com/x-productkb/policy-pricing/volume-licensing-site.html

    In case it helps to... Volume License Activation number: https://forums.adobe.com/thread/1526938

  • Not exist vs not in vs. =

    Hi all

    Oracle Database 10 g Enterprise Edition Release 10.2.0.4.0 - 64 bit

    I want to know what is the best according to the performance wise.

    I am running after query
    select count(*) from d_cmpny_load a, d_cmpny b
    where a.duns_id != b.duns_id
    
    both tables has 20 Million records
    
    index was created on duns_id for both the tables
    and it took 45 minutes and I see no output... I want to know performance wise that is best to examine


    Thank you...

    Hello
    If you want to know the number of missing documents, you can try this query. You should see scan limited index full joined with hash join in the plan of the explain command.

    SELECT /*+ use_hash(t1 t2)*/  COUNT(t1.duns_id)
    FROM d_cmpny_load t1,
         d_cmpny t2
    WHERE t1.duns_id = t2.duns_id (+)
      AND t2.duns_id IS NULL;
    

Maybe you are looking for