performing backup error Code: 0x80071AC3 need to format NTFS
try to backup
Iomega desktop drive usb2 hard
format system asked to continue
format does not have NTFS
only ex FAT
Error code now 0x80071AC3
cannot continue with the backup
I added an iomega desktop hard drive, the system asked me format may only need of presentation in ex FAT NTFS to make my backup, error Code: 0x80071AC3 now can't go back to my new HDD desktop please help
Hello
1. you try to take backup using Windows backup?
2. what security software is installed on your computer?
3. have you made changes on the computer before this problem?
4. were you able to create a backup successfully earlier?
5. are you able to format the Iomega hard drive to NTFS?
I suggest you try to check the drive for errors and check if it helps.
Check a drive for errors:
http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
Warning: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
See the following Microsoft article and check if that helps.
Please provide us with more information, so that we could help you to solve the problem.
Tags: Windows
Similar Questions
-
Windows Defender does not allow me to turn on or off. 0x800705b4 error code. Need help
Windows Defender does not allow me to turn on or off. 0x800705b4 error code. Need help
Hello
If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.
There is nothing to worry.
Using both programs at the same time can cause system conflicts, etc.
If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):
"Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.
Right click and select Properties , ensure that Startup Type is automatic.
Once modified, click apply and OK.
Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"
.
If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
And for now, change startup Vista programs without using Defender, use one of these methods:
"How to use MSCONFIG in Windows Vista"
http://netsquirrel.com/Msconfig/msconfig_vista.html
Or the program Autoruns for FREE:
"V11.21 Autoruns for Windows"
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902
See you soon.
-
computer don't backup error code 0 x 810000019
I don't know much about computers but I have a dell inspiron with windows 7 and I wanted it back up to an external hard drive. the hard drive is a type of western digital passport with just about a terabyte of free. my computer also has plenty of open spaces. whenever I try to save an error message appears on my screen saying: "a snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information. Details: the specified object is not found. "in the more information section it says error code:
0 x 810000019
I have no idea of what a the application event log is or how to get to him, but it makes no sense as to why my computer won't save. any help would be appreciated.
Could be the issue of the volume shadow copy service.
J W Stuart: http://www.pagestart.com
-
"unable to complete backup" error Code 0 x 80070002
Original title:
Error 0 x 80070002
Windows 7 Home Premium Version
Seagate external hard drive / software Acronis
I am unable to complete my WIndows 7 Home Prem to backup on my Segate external drive. 63% in the backup, I get "unable to complete backup" error Code 0 x 80070002. How can I get my support to end?
Hello
Welcome to the Microsoft Community Forums.
From your post, it seems that the backup is not complete and give you an error code: 0 x 80070002.
Quick questions:
1. What is the full error message?
2. how many profiles user is there is your computer?
3. What Backup program do you use?
This problem may occur if:
Cause of scenario 1
This problem occurs if you save a library that contains custom folders that are located under your user profile.
Cause of scenario 2
This problem occurs if the following conditions are met:
· Backup Windows tries to back up files in folders LocalLow, Contacts and research.
· These files are not present on your computer.
Note These files are only created if certain applications are installed on the computer.
Cause of scenario 3
This problem occurs if the following conditions are met:
· The computer has an NVIDIA USB EHCI Enhanced Host Controller Interface () chipset.
· The computer has at least 4 GB of RAM.
· You try to copy data from the computer to an external USB storage device.
If you use the Windows backup program then please go and follow the methods mentioned below and later a update on the State of the question.
Method 1: 0x8100002F error code and error code 0 x 80070002 when you back up files in Windows 7:http://support.microsoft.com/kb/979281
Method 2: Try to run the check disk on the system using the link below.
Check your hard drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors
Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
Hope that it helps post back if you have questions about Windows and we will be happy to help you.
-
External backup error code 0x80070005
I get a error code 0x80070005 when I try to do a full back up to my external hard drive. He says "access denied" but I am the administrator. This problem just started. I disconnected and reconnected the external drive and my computer recognizes that there is no problem.
Hello
1. don't he stops at any specific file?
2. do you have permissions to the entire file for the files that you are backing up and to the destination you save back to the top?
3. don't you make changes to the computer until the problem occurred?
To work around the problem, you will need to follow the steps below.
Step 1: I suggest to try to create a backup in the clean boot state and make sure that the antivirus software is disabled temporarily and check if that helps.
Follow the instructions in step 1 in the following article. Run the backup and check if that helps.
http://support.Microsoft.com/kb/929135
Note: make sure you put the computer to a Normal startup, once the troubleshooting completed.
Disable the anti-virus software
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Hope this information is useful.
-
Cannot view or change the settings of backup - error Code 0 x 80070422
I am able to run a backup using the existing settings/settings I put when my system was new two years ago. I just ran a backup and finished without any problems. But when I click on "Change settings" to view the settings, I get the error code 0 x 80070422. Error message States "the backup application could not start due to an internal error" followed by "the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.
I already read many posts on this site about this error and how to correct. I followed the suggested steps to fix the problem, but the error persists. =(
Specifically, I checked that the following Services are enabled.
-"Remote Procedure Call" (RPCSS) must be active, Automatic.
'COM + Event System"(EventSystem) must be active, Manual.
-'System Event Notification Service"(SENSE) must be active, Automatic.
-"Volume Shadow Copy" (VSS) must be active, Manual.
'Microsoft Software Shadow Copy provider' (SWPRV) must be active, Manual.
I also ran an SFC scan and received the following confirmation at the end-
"Windows resource protection has not found any breach of integrity."
Any suggestions on the next steps, I could try to fix this?
Thank you!
Hello
Please provide detailed information on this issue and I appreciate your valuable troubleshooting efforts toward the resolution of the problem.
However, we are still missing about two or three services so that this error happens when the necessary services are disabled.
Method 1: Please check these services.
- Block level backup engine - active - repair manuals
- -Active - backup manual Windows
If the settings above does not work, you can try to adjust Volume Shadow Copy (VSS) on Automatic and check if that helps. Then change it back to Manual after verification.
Once you make changes according to the above specifications, you can try a backup and check to see if that solves the problem.
If the problem persists, follow the next method.
Method 2: Disable the antivirus.
You can also try to temporarily disable the security software of the computer and try to create a backup and check if it works. If you are able to create a backup, you can contact the manufacturer of security software and check if you need to change the settings. Later, re-enable the security software.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Reference:
Set up or change automatic backup settings
Back up your programs, files and system settings
Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.
____________________
Thank you best regards &,.
Isha Soni
-
Windows 7 - set up a backup - error code: 80070422
Trying to make a backup for the first time on Windows 7 and get error code 80070422.
A run "sfc /verifynow" to check the file system and had no reported problems.
The following services are started:
COM event system + / start / automatic
DCOM Server process Launcher / start / automatic
Microsoft Software Shadow Copy Provider / start / manual
Remote procedure call (RPC) / start / automatic
RPC end point mapper / start / automatic
Shadow copy volume / start / manual
Windows backup / start / manual
Any thoughts on what to try next?
Thank you
Sherman
Hello Sherman,
Thanks for posting your question in the Microsoft Community. We are happy to help you.
To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:
- Do you take backup on an internal hard drive or an external drive?
- Significant changes were made to your computer before this problem?
In addition to all the services you mentioned, I suggest you to check and make sure that the following services are started and set to automatic.
Motor Service-level backup Windows Event Log & Task Scheduler
If the problem persists, try the following steps.
Step 1:
Try to take backup after you put your computer in a clean boot state, that State to the clean boot your system help determine if third party applications or startup items are causing the problem.
Perform a clean boot.
How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»
Step 2:
I would also say that you check your hard disk for errors.
Check a drive for errors
http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errorsImportant: All performing hard disk the disk check if bad sectors are found on the disc hard when the disk check try to repair this area so all available data on this risk to be lost.
For more information, please visit the following links.
Backup and restore
http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore
Backup and restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows/back-up-restore-FAQ#1TC=Windows-7
Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.
Thank you.
-
backup error code 0 x 80044321
error code 0 x 80044321
Hello
You give enough information as to how you are trying to back up and where you're trying to save up to.
Read these general information:
This information can help you.
If you want to make a complete PC Backup or a backup file only, buy an external hard drive.
Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.
All editions of Vista can do backups of files
Here's how to back up and restore your files:
"How to back up your data.
http://www.wintuts.com/how-to-backup-your-data
"How to restore your files.
http://www.wintuts.com/how-to-restore-files
This is how to do a full backup of the computer and how to restore it (for Vista Business, Ultimate and Enterprise only):
«How to make a backup of the computer in Vista»
http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/
"How to restore a full backup of the computer.
http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/
FAQ from Microsoft about backup and restore:
"Back up and restore: frequently asked questions.
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions
See you soon.
-
Dell DataSafe Online Backup Error Code BuEng_2810
Can anyone help? I am at a loss. I tried in vain to save and receive this message.
Error code: BuEng_2810
Redirector Server unavailable (or inaccessible because of the firewall). Check your Internet connection or your Internet security settings
Thank you very much.
All together. After several reboots computer, I was able to backup without problem.
-
Windows 7 - backup error code: 0 x 81000019
How can I fix this prob.
Hey IanCraigie,
For starters, you disable your firewall and anti-virus soberly when you save correct? If this isn't the case, you should do this.Also reading your question, I have found a thread that I think will be very useful for you.Look through these threads and try some of these steps. If you have any questions, return to this topic and explain what were your results. Be sure to include all the details that you can when you describe your results.Thanks for posting of Microsoft Answers! Good luck with the troubleshooting. -
Windows backup error Code: 0x8007007B
I have a Lacie external hard disk, and the drive letter is H for it on my system. I run the "Backup and Restore" program of Windows 7 and accept the default settings. I put the location of the backup on my drive (H) and start the backup process. The system starts the backup with the progress bar. After about 6-7 minutes, the red bar appears and the system said of "the last backup failed with success." Click on for more information, the system gives the following details:
The file name, directory name or volume label syntax is incorrect
Error code: 0x8007007B
What is wrong on Earth?
Hello
Check if you have two drives C: in the list with the same name of Volume (see figure below). Uncheck the box for the double volume and select the check box for the good player (the one with the Windows logo).
Fig 2: System Restore enabled for the wrong drive. (The image is for the restoration of the system; in your case check in the backup and restore)
If you can't find two volume labels then try that explained below.Not sure of the problem. But give it a try. Reset your default backup and start over. Make sure you have disabled any antivirus on the computer temporarily.
Support user and system - reset the default Configuration files
If u look around here in the link it seems to be several different backup problems.
Let me know what happened
$C
God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart
-
error code 8000ffff - need help
I get 8000ffff error code when you try to install the upgrades of windows... can anyone help
Got Google?...
Error when you download updates using Windows Update or Microsoft Update: 8000FFFF
http://support.Microsoft.com/kb/946414 -
Can't do a backup error code 0 x 81000033
As far as I can tell that this problem has been in existence for at least six months. I have just updated to Windows 7, MSFT is well aware of this problem, why have they not put an update? I have read the information written by MSFT employees who seem to be a cure, the problem is a problem to understand the functioning of a computer to accomplish the Herculean task which they suggest. I just want my computer to work. Can someone give me please a simple to follow instructions.
You just need to create a new partition on your hard disk to use for backups. Go to control panel - system and safety - create and format hard disk partitions. Once there right click on your drive and reduce the volume of a few GB in order to free up space. Then right-click on the empty partition and select create volume simple. You will be able to give it a new drive letter (C, D, etc.) so when you do change your backup settings to use the new drive letter and it should work for you.
-
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation status: genuine
Validation code: 0
Code of Validation caching online: 0x0
Windows product key: *-* - YYK6C - RQFKD-X9WHF
Windows product key hash: 4hx9Yg1u2rCOYaj403BsverJzig =
Windows product ID: 89578-485-4437073-71230
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.0.6002.2.00010300.2.0.003
ID: {E05EFAD4-0E7A-4CD9-8F74-54AEA984B4E8} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: Registered, 1.9.42.0
Signed by: Microsoft
Product name: Windows Vista (TM) Home Premium
Architecture: 0x00000000
Build lab: 6002.vistasp2_gdr.091208 - 0542
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 108 VLK invalid
Microsoft Office Enterprise 2007 - 108 VLK invalid
Microsoft Office Standard 2007-100 authentic
Microsoft Office Visio Professional 2007-100 authentic
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: B4D0AA8B-604-645_B4D0AA8B-604-645_B4D0AA8B-604-645_B4D0AA8B-604-645_77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program may Explorer\iexplore.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
[File mismatch: C:\Windows\system32\Slsvc.exe[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\drivers\Spsys.sys[6.0.6002.17040], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\Slcext.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\advapi32.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\kernel32.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\rpcrt4.dll[6.0.6002.18024], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\authz.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\msvcrt.dll[7.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\samlib.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\ntdsapi.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\dnsapi.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\ws2_32.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\nsi.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\user32.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\gdi32.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\msimg32.dll[6.0.6000.16386], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\powrprof.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\setupapi.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\oleaut32.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\ole32.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\shell32.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\shlwapi.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\version.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\winmm.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\oleacc.dll[7.0.6002.18155], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\mmdevapi.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\wtsapi32.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\regapi.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\crypt32.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\msasn1.dll[6.0.6002.18106], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\userenv.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\secur32.dll[6.0.6002.18051], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\netapi32.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\psapi.dll[6.0.6000.16386], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\netrap.dll[6.0.6000.16386], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\wldap32.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\winbrand.dll[6.0.6000.16386], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\iphlpapi.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\dhcpcsvc.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\winnsi.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\dhcpcsvc6.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\gpapi.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\slc.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\gpsvc.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sysntfy.dll[6.0.6000.16386], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\winsta.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\nlaapi.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\ncrypt.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\bcrypt.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\mpr.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\credui.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\cryptui.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\wintrust.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\imagehlp.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\dbghelp.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\mssign32.dll[6.0.6000.16386], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\wininet.dll[8.0.6001.18904], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\normaliz.dll[6.0.6000.16386], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\iertutil.dll[8.0.6001.18904], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\tapi32.dll[6.0.6000.16386], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\rtutils.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\rasapi32.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\rasman.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\rasdlg.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\mprapi.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\activeds.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\adsldpc.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\atl.dll[3.5.2284.2], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\certcli.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\winscard.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\netplwiz.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\urlmon.dll[8.0.6001.18904], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\propsys.dll[7.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\xmllite.dll[1.2.1009.0], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\mlang.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\advpack.dll[8.0.6001.18702], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\apphelp.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\msiltcfg.dll[4.0.6000.16386], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\shunimpl.dll[6.0.6000.16386], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\devmgr.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\newdev.dll[6.0.5054.0], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\dwmapi.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\winspool.drv[6.0.6002.18087], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\cscapi.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\uxtheme.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\windowscodecs.dll[7.0.6002.18107], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\ntshrui.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\feclient.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\shdocvw.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\browseui.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\imm32.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\msctf.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\duser.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\msrating.dll[8.0.6001.18702], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\ieframe.dll[8.0.6001.18904], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\msi.dll[4.5.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\mshtml.dll[8.0.6001.18904], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\msls31.dll[3.10.349.0], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\comdlg32.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\printui.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\cfgmgr32.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\puiapi.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\hlink.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\imgutil.dll[8.0.6001.18702], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\usp10.dll[1.626.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\inetcomm.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\msoert2.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\ieui.dll[8.0.6001.18904], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\efsadu.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\mfc42u.dll[6.6.8063.0], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\odbc32.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\oledlg.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\linkinfo.dll[6.0.6000.16386], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\query.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\clbcatq.dll[2001.12.6931.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\cabinet.dll[6.0.6001.18000], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\scecli.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\w32topl.dll[6.0.6000.16386], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\rpchttp.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\winhttp.dll[6.0.6002.18096], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\fwpuclnt.dll[6.0.6002.18005], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\ktmw32.dll[6.0.6001.18000], Hr = 0x800b0100Other data-->
Office details:{E05EFAD4-0E7A-4CD9-8F74-54AEA984B4E8} 1.9.0027.0 6.0.6002.2.00010300.2.0.003 x 32 *-*-*-*-X9WHF 89578-485-4437073-71230 5 S-1-5-21-3001590107-1846963844-3719825051 Hewlett-Packard HP G60 laptop Hewlett-Packard F.54 20090818000000.000000 + 00045313507018400F6 1009 0409 Atlantic Standard Time(GMT-04:00) 0 3 HPQOEM SLIC-MPC 108 108 12 64BC76978749586 GW6PzcEVEDTVKeO5Ym5UUm41dBk = Microsoft Office Enterprise 2007 89388 707-0441865-6584014 100 Microsoft Office Standard 2007 12 8F0B79ADC1F726C ZP600WtCOO7QeBzB5lx3eKw5XNE = 81607-310-3688424-64006 10 100 Microsoft Office Visio Professional 2007 12 B04936C019CF712 DIdl4T60bvI GGx9Qw1ttaXLAUg plus 84890-905-0908864-63484 1 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.0.6002.18005
Name: Windows Vista, HomePremium edition
Description: operating system Windows - Vista, retail channel
Activation ID: 9e042223-03bf-49ae-808f-ff37f128d40d
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 89578-00142-485-443707-00-1033-6001.0000-2142009
Installation ID: 007066816440831596028902345761460713462486253264403204
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
Partial product key: X9WHF
License status: licensedWindows Activation Technologies-->
N/A--> HWID data
Current HWID of Hash: OAAAAAEABAABAAEAAQACAAAAAwABAAEAeqhU/jKNILUe8paSVhCmyRSW8vSCMuC2pNY8eaxWfig =Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20000
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
HPQOEM APIC-SLIC-MPC
HPQOEM FACP SLIC-MPC
HPQOEM HPET SLIC-MPC
START HPQOEM SLIC-MPC
MCFG HPQOEM SLIC-MPC
SLIC SLIC-MPC HPQOEM
SSDT HPQOEM SLIC-MPlonglong53,
I suggest that you run the following tools and take note of the results, and then run Windows Update again.Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
To try to save my laptop on an external hard drive on the network, I get message 'the application view event log' for ' VSS and 'PSP' and backup finishes. " I backed up my office in the same place without problem. Previously saved portable to another disk external network without problem.
I did some research but no result. I would appreciate an answer that starts with "Here's what you do..." "I'm not technical enough to unfold the 'mystery' VSS, CPR or even 'application log '. Thanks for any help.
Hi Phil,
The problem here is with the external hard drive file system, make sure that the external hard drive is formatted with NTFS and FAT32 file system not.
because FAT32 does not support more than 4 GB file size.You can also try to increase the space used by the service Volume Shadow Copy (VSS). (See steps below)
1. click the button start-> all programs-> Accessories.
2. right click on command prompt and select "run as Administrator".
3. click on continue when user account control window appears.
4. type the following command and press ENTER:Vssadmin resize shadowstorage / on = C: / For = C: / MaxSize = 10 GB
(This number is just an example. Use as much as you want, the maximum number of the MaxSize value is 15% of the space in the partition).Back to all doubts.
Maybe you are looking for
-
Chrome browser adwares / malwares? Cannot close the window
HelloI'm trying to help my mother to troubleshoot remotely. She has a Mac Mini running El Capitan 10.11 and she seems to have some sort of malicious infection? I enclose a photo of its Chrome browser window - she can't close Chrome and if she did a
-
Recently, I moved my Cloud drive (OneDrive) to a second M2. SSD drive instead of the M2. I've noticed that looking for a file just by typing keywords in the Windows Start button used to be almost instantenous but now files simply does not appear in t
-
Question of operation sequence - order of execution of events
Hello Im a VI to measure the current and the voltage across a writing device. To do this, I increment the tension, and for each increment, I measure voltage and current. I send SCPI commands to feeding and the meter with GPIB. My question is: in look
-
My cmputer reports an error Ox004D401. It says something about the licensing issues... hope you can find. Gerd Hansebraten cordially
-
When left and up/down keys are pressed together, one that is pressed subsequently does not work