Peripheral CDDVD corrupted or missing (code 39).

Similar Questions

• my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

  my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Satellite Pro P100 - 465 Vista: of DVD player may be corrupted or missing (Code 39)

  I just bought a P100-465 pre-loaded with Vista Business, it was working fine and I managed to load the DVD player software.

  However, the second day of use, the DVD player has dropped off and in the device manager tells me that Windows cannot load the device driver, it may be corrupted or missing. (Code 39)

  When I check the details of the pilot, I have the last version loaded and Vista cannot find another update.

  This before with Vista on a Toshiba Qosmio. What is my dosage?

  Hello

  A question: why you n t use the option to search the forum to find discussions that could provide useful information?

  I used this option and found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843&MessageID=50483

  You will find a link to the Microsoft page that explains the problem and a solution

• Equium L20: Lost CD/DVD drive - driver may be corrupted or missing (Code 39)

  I just lost the driver POINEER DVD - RW DVR-K16S. For some reason, it's a troublesome TI since im doing a computer course, I've been online and can not find the driver at all, I tried also to update via Windows and nothing. "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  This is the message I receive via the Device Manager. Any help or pointers as to get this driver greatly desired. I can load the driver myself i just have to find it. The driver disappeared after apron anything malicious on a CD.

  Thank you very much

  Check this box:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843&MessageID=50483

  It should work! ;)

• No sound on Equium - driver corrupted or missing (Code 39)

  Hello

  My name is Fanta.
  I recently wanted to play music on my computer using windows media player, but no sound from the speakers of the laptop, I checked the Device Manager and there is a sign less next to the audio, video recorders and game when I scroll it is a yellow circle with an exclamation mark next to the audio device «Microsoft kernel wave mixer» When you try to play music my windows media player 11 it is said
  "Windows media player cannot play the file because there is a problem with the audio device. There may be no audio device installed, it can be used by another program, or it might not work properly ".

  When I try to uninstall the device and then analyze installed again it gives me an error message
  "Windows cannot load the driver for this device for this device, the driver may be corrupted or missing. (Code 39) »

  Is it possible that I can do my speakers work again if so how?
  Thank you Sam

  Hi Kamal,

  If you had a tools and Utilities CD that came with your laptop then I suggest that you check to see if it contains the necessary drivers and utilities to support for your sound card. Alternatively, you can be able to download the forms from the download from Toshiba site. You will need to specify the number of the correct model for your laptop.

  Kind regards

• Satellite A210: ODD does not work - driver may be corrupted or missing - Code 39

  The STRANGE ('TSSTcorp CDDVDW TS - L632H ATA Device") does not work on my laptop more.

  In Device Manager, the Properties dialog box says "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  laptop: A210
  OS: Vista 32 bit

  I think the material is OK, as I install dual-boot linux, the STRANGE works very well under linux.

  I found updates of firmware STRANGE on the Toshiba site, but these cannot be installed with the drivers dysfunctional.

  Is it possible to find the drivers somewhere? (I can use google, but I don't know if driver download sites are trustworthy).

  Any other ideas?

  Hello

  This has been discussed a lot of time here;
  The workaround is;
  -remove the ODD of Device Manager
  -access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -restart the laptop

  Good bye

• Device driver Matshita DVD - RAM US890AS corrupted or missing (code 39)

  My DVD player does not work and I get the following when I try to update the driver: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39).  Any suggestions?

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  I suggest you to follow the links and check out them.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060/en-us

• my dvd drive has stopped working. says windows cannot load the device driver, can be corrupted or missing code 39. When I search for updates, it says I have the most up to date. Help!

  drive is Matshita DVD-RAM UJ-850 s a SATA drive

  I use windows Vista

  Driver provider Microsoft

  Day 21/06/2006

  Version 6.0.6002.18005

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I can't read a disk in my computor what can happen in the properties of windows cannot load the driver for this hardware device, the driver may be corrupted or missing (code 39) can anyone help

  I went to put in a cd to look and he wanted to get on-screen computor Ive seen it before, but for some reason any it stoped working. I went on a local drive Q and click with the right button to open it, but then it reads that q:\ is not accessible. access denied

  Hello

  1. on what application you are trying to read the disc?
  2. don't you make changes to your computer because of which the question began?
  3. is the relevant question to a specific application or a disk?
  4. what operating system is installed on your computer?

  There are many causes of Code 39 errors:
   
  * A required device driver is missing.
  * A required binary file is corrupted.
  * There is a problem with the file I/O process.
  * A pilot that refers to an entry point in another binary file cannot load.

  If you use Windows 7, we will first open the convenience store hardware and devices to perform automatic troubleshooting services.

  You can also click "Run now" to this article and check if this is useful.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• I have a Vista system and my cd/dvd device driver is corrupted or missing (Code 39).

  How can I recharge the device driver? Whenever I have to uninstall the driver and the system tries to install the driver, I get the message that is damaged or missing.  How to solve this?

  I tried deleting the cdrom.sys file in windows, but it won't let me even if I'm on the administrator account.

  I also tried driver uninstall with the installed drive and rebooting, but the corrupted message driver happens every time that I reboot.

  Is it possible that the drive itself is the problem?

  I'm ready to get an external cd/dvd drive.

  Try running the Fixit from here:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  "Or you can try the procedure in.
  Fix it myself

• Loss of the network connection, drivers is may be corrupted or missing (code 39) on the network adapter. Just happened out of the blue.

  System worked very well. Integrated NETWORK interface

  Do a scan of malicous software from Ms. All of a sudden stopped and gave the failure error message. Closed the program and tried to run AV--CA could not connect to the network.

  Reboot, etc. and no network connection.

  Tried to uninstall the network drivers (all had exclaimation point) but couldn't - "device may be required to boot" (even tried in safe mode)

  Tried to update the drivers with copy of the drivers (from CD) - said he could not.

  Put in an adapter external network - same mistakes with it.

  Help - don't know if the software MS pooched my drivers or other files? I really didn't ' want to reinstall the operating system and any other software.

  Hello Im Tryin,

  Thank you for your message.  Let's try a system restore to a point when the system is working properly.  It might be that recognized the pilots signed and removed malware analysis.  Click HERE for the system restore instructions.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Device Manager show that this driver may be corrupted or missing (error code: 39) on CD/DVD devices

  Device Manager has a yellow ball with an asterisk on the CD & DVD devices.  My computer does not display a device.  The Device Manager has a message that the driver may be corrupted or missing (Code 39).  It happened after uninstalling Norton and McAfee installation.  I uninstalled McAfee and tried to install the drivers.  I uninstalled and reinstalled the device.  Still no CD or DVD displayed in my count.  Everybody recognizes the problem?

  Original title: CD & DVD devices do not work

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Equium L20: UJ - 841S drive may be corrupt or missing error code 39

  Hello

  I have an Equium L20 and CD/DVD does not work.

  I had a quick glance and says windows Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Firmware for Mat * a UJ - 841 S!

  Thank you.

  Hello

  I assume that drive is not displayed in Windows Explorer. Am I wrong?

• DVD - ROM can not be detected on satellite - corrupt or pilot missing (Code 39)

  My laptop does not detect dvd - rom, is there any solution for this?

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Hello

  The description of your problem is very bad. I really don't understand is there any problem writing a few sentences more and explain the problem more precisely.

  Anyway, please try this http://support.microsoft.com/default.aspx?scid=kb;en-us;320553

  Maybe it helps you!

• COM1 "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  Running Server 2003, Web Edition SP2 Build 3790.

  The two ports COM1 COM2 & lost in the Terminal Server session with a managed switch.

  Gives the device as Manager: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "on both ports.  pilots - serial.sys and serenum.sys (5.2.3790.3959 worm file: 64 KB / KB 18: 2/17/2007) 03:58

  Tried all common solutions driver update and uninstalling/reinstalling SP2 installation rerunnig. But the problem remains.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads

   

  Diana

  Microsoft Answers Support Engineer