Peripheral storage but not with ethernet connection USB port work

Similar Questions

• Satellite L - a single USB port works

  Hello

  I've had this laptop for a few months and I could not do all the USB ports work, the system recognizes all the but work alone. If I check the system it says ports are working properly and that it has the latest driver but when I do anything, a mouse, USB KEY, connect headsets to listen nothing, only one of the ports to recognize hardware.

  Can someone help me?

  Hi alecarrill63,

  It would be interesting to know what laptop you have exactly and what operating system you are using.
  Can you post this important information?

  In your case, I will try to update the Web from Toshiba site chipset driver

  But theoretically, if only a single USB port works, the other ports may be defective and therefore, it would be necessary to replace the motherboard. :(

• There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.

  There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.
  I tried to connect my xbox to my computer to xbox live via the 3g router, but I was unable to. According to me, there is something wrong with the network card, since neither the wifi (wlan?) nor the lan connection seem to work.
  I harnessed connected my iPod, Xbox 360 and Nintendo DS for her, but not my computer. Please help me, what wrong with my computer?

  original title: problem with the map?

  Hi GustavTak,

  1. you have made no changes to the computer before the broadcast took place?
  2. do you get an error message?

  Try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Set up a wireless router
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

• Can connect to Skype with a single account, but not with the other

  I am able to connect to Skype with my own login but not with the credentials of my friend on his pc. I can however connect with her details as well as mine on my pc?

  You need to upgrade your Internet Explorer to the latest version of IE8 for Windows XP.

  http://filehippo.com/download_internet_explorer_xp/

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• How can I synchronize my emails from my Mac Pro on my iPhone and iPad Mini?  My iPhone and iPad are synchronized, but not with my Mac Pro?

  My iPhone and iPad emails are synchronized, but not with my Mac Pro?  Example, when I delete an email from my iPad, it is deleted in my iPhone but not my Mac computer.   How to connect the three...

  An e-mail account? More than one account? All accounts?

  Who is the provider?

  What type of IMAP/Exchange or Pop3 account?

  Only IMAP/Exchange accounts synchronize the device and some accounts as Google can be configured in any way.

• The Web of LabVIEW user interface directly to the sensor with Ethernet connection

  Hello

  Is it possible to connect to the interface user Web of LabVIEW directly to a sensor with Ethernet connection?

  By directly, I mean without using any Web Service LabVIEW VI.

  Thank you

  Marcelo

  Hello

  The only communication with other devices using the Web user interface designer is through web services, either motorized or not LabVIEW. To connect with a sensor with the generator of the user Web interface without using LabVIEW, the sensing device must be accessible via HTTP and give you a way to read its data using XML web services based on.

• Device USB not recognized - device connected USB has malfunctioned and Windows does not recognize it

  I have a HP Pavilion dv4 laptop running Windows 7 Home Edition Premium and the USB ports worked well for a HP deskjet printer and an older Casio digital camera. Then one day, the laptop decided not to recognize the Casio digital camera and gave the error message "USB device not recognized" and also indicated that the device connected to the computer has malfunctioned. This prompted me to buy a new digital camera Canon. Well, a new camera has not fixed the problem. Now, anything that is connected to one of the 2 ports USB will not be recognized by my laptop. Help!  I am at a loss to understand this.  I tried using Microsoft suggested below:

  Suggestion 1: the problem with USB devices, uninstall and reinstall all USB controllers. This allows controllers to recover the port USB of his condition does not respond.
  USB controllers represent the USB ports in Device Manager.

  a. Click Start, type Manager of devices in the search box of start and press ENTER.
  b. expand Bus USB controllers.
  Note: you may scroll through the list to find this point.
  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.
  d. Repeat steps above for each controller USB is listed under Bus USB controllers.
  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
  f. check the USB device to see if it works.

  This has not fixed the problem.  Then the Device Manager, I tried to update the drivers on all the USB controllers and root hubs. While some may have received software updates downloaded, it still has not corrected the problem of unrecognized USB device after the computer is restarted.  I hope that someone knows the solution to this situation and can pass it on to me. Thanks for reading and any help display.

  Read previous messages revealed the solution for USB devices not recognized on my HP Pavilion as well as several other laptop models.  Shut down the computer and remove the battery and wait for about 15 minutes. Reinstall the battery and restart the computer.  USB ports are working to download pictures from my digital camera from Canon and charging a cell phone, etc...   I hope it helps others with this problem!

• HP Officejet Pro 8600 Premium: I have a printer HP 8600 pro works fine with my Windows 7 computer, but not with Windows 8.1

  I have a printer HP 8600 pro works great with my computer Windows 7 & computer laptop, but not with my laptop Windows 8.1. When I tried to print wireless (I didn't try connected), it would print only the first pages of 2 or 3 of everything I tried to print. I uninstalled the printer and inserted the CD to try to re - install and I got an error message indicating that the printer does not work with my operating system. I was able to install it earlier, but now, it will not install at all.

  Too bad. I'm sorry. I'm went to the HP Support Web site & downloaded a new driver & now it works!

• Tried everything: 1 address, but not able to connect via HTTPS to the server:

  Hello

  I am trying to connect to the third of the OSB business service web service.

  objective WS is protected with SHA1 base 64 encoded password.

  I am able to connect to the service target of SOAP UI. I am also able to Telnet to my server for dev to the URL of the WS.

  But when connecting from OSB BS I'm tried them all: 1 address, but not able to connect via HTTPS to the server: error.

  Can you please help me solve the problem.

  I tried different policies, but still does not work.

  Kind regards.

  Problem solved. We need to use the proxy server.

• How to send an audio message, but not with imessage?

  How to send an audio message, but not with imessage?

  Find another app/service that will allow you to do. Or record a voice memo using the voice recorder application and attach to an SMS.

• Help! I need to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting on my phone, I need to change? Help, please

  Help! I NEED to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting I need to change on my phone? Help, please

  You will need something like that and a micro USB to USB cable

  http://www.Apple.com/shop/product/MD820AM/A/lightning-to-micro-USB-adapter

• Why is compatible windows 7 with Medal of honor alied assualt and assualt pacifc and airborne, but not with Medal of Honor 10eanniversaire Bundle. and have xp and windows 7 can I play and keep the games on xp with windows 7 is installed

  Why is compatible windows 7 with Medal of honor alied assualt and assualt pacifc and airborne, but not with Medal of Honor 10eanniversaire Bundle. and have xp and windows 7 can I play and keep the games on xp with windows 7 is installed

  Hello
  Welcome to the Microsoft answers site.
   
  By design, the game is not compatible with windows7.
   
  You can also check with the manufacturer of game for any version upgrade of this game, which could be compatible with windows7.

  Yes, if you have the dual operating system on your computer, you can play and record games on xp, start the computer in Xp and you can play the game.

  I also invite you to visit this link to learn more about running the old programs/games in xp or vista compatibility mode.

  Here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know if you have any questions.

  Thank you and best regards,
  Azam - Microsoft technical support.

• Train with webutil works with the browser, but not with webstart JNLP 12 c

  Hello

  I set up forms and reports suite 12 c according to the instructions and I'm testing my forms updated since version 10 g.

  In some forms, I use webutil.

  I can run forms without webutil with the browser or java web start (everything works fine).

  I have problems with the forms use webutil tha, they work very well with the browser, but not with java web start.

  When I run forms with webutil and webstart I see all white and the "crash" application: I must leave because other forms without webutil also do not work.

  Here is my config in formsweb.cfg:

  [Appws] <-start java web

  form = nomeform

  Archive = frmall.jar, frmicons.jar

  WebUtilArchive = jacob.jar, frmwebutil.jar

  WebUtilTrustInternal = true

  WebUtilLogging = off

  WebUtilLoggingDetail = normal

  WebUtilErrorMode = alert

  WebUtilDispatchMonitorInterval = 5

  WebUtilTrustInternal = true

  WebUtilMaxTransferSize = 16384

  baseHTML = webutilbase.htm

  baseHTMLjpi = webutiljpi.htm

  basejnlp = webutil.jnlp

  WebStart = on

  [appnows] <-no java web start

  shape = mercurio

  separateFrame = true

  Archive = frmall.jar, frmicons.jar

  WebUtilArchive = jacob.jar, frmwebutil.jar

  WebUtilTrustInternal = true

  WebUtilLogging = off

  WebUtilLoggingDetail = normal

  WebUtilErrorMode = alert

  WebUtilDispatchMonitorInterval = 5

  WebUtilTrustInternal = true

  WebUtilMaxTransferSize = 16384

  baseHTML = webutilbase.htm

  baseHTMLjpi = webutiljpi.htm

  basejnlp = webutil.jnlp

  What could be the problem?

  Gianpaolo

  Remove Appws:

  Archive = frmall.jar, frmicons.jar

  WebUtilArchive = jacob.jar, frmwebutil.jar

  baseHTML = webutilbase.htm

  baseHTMLjpi = webutiljpi.htm

  Add frmicons.jar and jacob.jar to $ORACLE_HOME/forms/java/extensions.jnlp.

  and try again.

  Concerning

• All my objects in Indesign are locked. I can move objects with the help of the arrow keys on my keyboard, but not with the mouse. I must have done an order by mistake. Any suggestions?

  All my objects in Indesign are locked. I can move objects with the help of the arrow keys on my keyboard, but not with the mouse. I must have done an order by mistake. Any suggestions?

  Thanks for your help. I work again InDesign brokedown and after a reboot, everything works perfectly fine.