Peripheral USB is displayed is not on the desktop

Similar Questions

• Is there a download from Microsoft which will create a bootable usb media that does not have the drivers?

  Original title: A bootable Windows 7 media

  I work on a Lenovo 2-in-1 with Windows 7 (for games) and 10 (for a normal use) Windows to dual-boot. I created a USB stick with Windows 7 Pro (64 bit) of a legitimate Windows 7 Pro disc. The computer starts on the usb device and plays normally, however, one of the steps asks a driver for cd/dvd and this 2-in-1 (Lenovo Flex 3) doesn't have a built-in CD/DVD. All other drivers are located in a folder system. My question is, given my key Windows 7 can I create a new bootable media that does not demand drivers? Is there a download from Microsoft which will create a bootable usb media that does not have the drivers? I know that I can reinstall the drivers manually after the installation.

  Thank you

  Matt Armshaw

  Windows 7 or Windows 10 come preinstalled?

  If you install Windows 7 on a system that is preinstalled with Windows 10, you must do the following before:

  -Disable the secure boot UEFI

  -Disable the quick start

  -L' install created media can be corrupted.

  How to: Dual Boot Windows 7 or Windows 8 with Windows installed 10 first

  I suggest that you try to create another bootable copy.

• Macintosh HD not on the desktop icon

  Erased my 13-inch Mid 2007 MacBook so I could give to my granddaughter. The Macintosh HD icon is not on the desktop. How can I get this back on my desktop?

  This assumes you have now a what OS X installed on the computer running. given that

  other reasons (especially if the system is not fully or correctly installed) may not.

  1. In the Finder, choose Preferences from the Finder menu.
  2. Click the general icon in the toolbar.
  3. Select "Hard disks" in the "show these items on the desktop:" section.
  4. Close the Finder Preferences window.

  • Mac OS X v10.6: how to show the icon for your drive on the desktop - Apple Support

  The instructions above article apply to other versions of OS X Snow Leopard and Lion.

  Just that some versions of OS X is more by default displays the Macintosh HD on desktop.

  For many items, the integrated help viewer can be used to help find answers.

  If you have other topics of inquiry, please post even if it can be

  some time depending on the time of day (half a world away, maybe?) before a response.

  I hope you can find a good book like offers from manual of the Missing series for offline use.

  For older versions of OS X, I found the used items store or thrift shops a source.

  Good luck & happy computing!

• How to add a Gadget in Windows 7 to display AN image on the desktop and set its size

  The slide show in Windows 7 Gadget displays the images to a predefined size.
  I want to increase the size of this form, if possible.
  If this is not possible, how can I do (add) a Gadget to display a picture on the desktop and set its size.
  Thank you in anticipation of some tips.

  Click with the right button on the desktop background and select Customize,

  Click the downstairs desktop background link on the left

  

  Another thing would be edited / Resized in a photo editing program at least the size in pixels of your monitor.

  Right-click on your desktop, and then select the screen for your recommended resolution setting resolution / pixel dimensions.

• I can not install the Desktop Manager. He sends me to support.

  I can not install the Desktop Manager. He sends me to support.

  Hello

  Please download and install the Adobe CC cleaning tool use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6. Solution step 3.

  Remove the creative cloud desktop application, Adobe and Adobe application Manager id credentials.

  Download Adobe Application Manager of Adobe - Adobe Application Manager: for Windows: Adobe Application Manager: thank you (Windows), Adobe - Adobe Application Manager: for Macintosh: Adobe Application Manager: thank you (Mac).

  Run the downloaded file. (you will get day progress bar).

  Once the Installation is complete, download Adobe Creative download cloud Adobe Creative Cloud apps | CC free trial Adobe. Install and connect to creative cloud.

  Thank you

  Saurabh Rai

• Re: Satellite L855 - 11 p - peripheral USB 3.0 does not not in the USB 3.0 ports

  I use 2.0 devices in the ports of 3.0 fine, but my 3.0 device will not work. It connects then disconnects once, not appearing is not in the Device Manager to all.

  I tried to install the USB driver from this site for my model. It made no difference.

  Any ideas? Thank you.

  Can you please tell us what USB 3.0 device do you use?

• Satellite Pro L300 - USB card reader does not support the 64 GB

  HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

  Posted by Trees
  

  HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

  Hi, here is a link to not detected by the PC card reader:
  http://KB.SanDisk.com/app/answers/de...CTED-by-the-PC
  You can take a look, hope it will be useful to you.

• Selected physical channel DAQmxCreateAIVoltageChan OR-USB-9237 VB6 does not support the type of action required

  I have a VB6 program with code that correctly reads the analog inputs of a NOR-USB-6008.

  I tried to re - use the code in a module of extensometer OR-USB-9237, but at the stage of DAQmxCreateAIVoltageChan, I get the following error:

  "Measurements: physical channel selected does not support the type of measure required by the virtual channel you create."

  Create a channel to a type of measure that is supported by the physical channel, or select a physical channel that supports the type of measure. »

  Should I call one function other than DAQmxCreateAIVoltageChan?

  If so, what is it, or where can I find the reference for these functions?

  Or - if it of the right function, should I pass different arguments?  Currently, I'll call you:

  DAQmxErrChk DAQmxCreateAIVoltageChan(taskHandle, "Dev1/ai1", "", DAQmx_Val_Cfg_Default,-10, 10, DAQmx_Val_VoltageUnits1_Volts, "")

  Thanks in advance for your help

  -Alas

  I thought she 372251a. PDF

  Firstly, the correct function is DAQmxCreateAIVoltageChanWithExcit

  Second, you can't just ask for a sample single channel - ask for 2 samples instead.

  -Alas

• Player Windows Media displays is not on the screen

  My Windows Media Player is played, but it does not appear on the screen... it looks like its current running in the desktop background? Displays tasks on the bar but the screen? I can right click on the far right of my office and the WMP menu appears, but no picture will appear.

  Hi Rosieand7,

  It looks like the Windows media player is in Mini Player mode.

  Mini Player mode allows you to minimize the player to the Windows task bar, while having access to playback controls and the ability to view visualizations and information about the currently playing item.

  In the mini Player, click anywhere in the drive that is not used as a button or volume control. The Player returns to the way it was before.

  Switch between display modes in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/switch-between-display-modes-in-Windows-Media-Player

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Whne I click on properties to a USB device, ReadyBoost is not in the legs. What should I do?

  My computer is slow superfluosly, and tried for centuries to spped it upward. Finally, I discovered about ReadyBoost, but it does not appear in the Panel properties of any USB storage device I plug it into my computer. Help please?

  Hello

  See the following message on how to search on your computer for optimal performance.

  Your USB key is probably not ready ReadyBoost and many of those who claim to be really aren't or are
  only marginally so.

  You can add memory, or use a very fast Flash DRIVE for READYBOOST.
  The combination allows more however, either will help some when using memory of pigs.
  (Those who use a lot of memory, large files, or to have a lot of programs open at the same time).

  (A QUICK Readyboost drive is the best cheapest bang for buck. The only time where you will notice
  It is during these pigs are at stake).

  ReadyBoost uses up to 4 GB of disk space for caching, which can allow the computer to
  run a little faster especially when a large number of programs are running (or some that use huge)
  data files as photoshop).

  To use a USB stick in the USB port and it must initialize and appear as a drive
  Space in the start - menu computer or Windows Explorer. You can then COPY or SAVE files to
  the reader. To remove the drive using the Safely Remove Hardware icon near the clock in
  Lower right corner.

  ReadyBoost
  http://www.vista4beginners.com/ReadyBoost

  What is ReadyBoost
  http://www.winvistatips.com/ReadyBoost-T25.html
  Explore the features: Windows ReadyBoost
  http://www.Microsoft.com/Windows/Windows-Vista/features/ReadyBoost.aspx

  DON'T GO OUT AND JUST BUY A READER WHO CLAIMS THAT IT IS READY - READYBOOST
  many of them are or stretching at least the truth. Look at the sides of the player below and buy
  a you know is FAST.
  
  Don't forget that the readyboost max cache is 4 GB. If your device is more than you can use it to
  storage. And you need a fast reader.

  ReadyBoost - list of speed Flash memory
  http://www.techcrater.com/2007/04/05/ReadyBoost-Flash-memory-speed-list/

  How to find the index of ReadyBoost speed
  http://www.techcrater.com/2007/04/06/how-to-find-ReadyBoost-speed-rating/

  USB Flash Drive speed - driving tests size
  http://usbspeed.NirSoft.NET/

  http://www.grantgibson.co.uk/misc/ReadyBoost/?make=SanDisk

  http://www.techcrater.com/2007/04/05/ReadyBoost-Flash-memory-speed-list/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• 5532 ENVY printer display does not exceed the setup button

  Hello

  I just bought the above printer and tried to put in place. I had it works from a windows vista PC if the functionality is all ok, but the screen on the printer itself will not move beyond the screen saying "retail demo" on the lower left and "set" in a blue box on the lower right.

  By pressing the blue button "setup" does nothing. Etc, rebooting I tried, but everything goes back to this screen. Linking the different tools of diag HP PC says everything is fine.

  I ran http://ftp.hp.com/pub/softlib/software12/COL47810/mp-115828-6/EN5530_198.exe who got the printer on the network correctly, but does not mention the error of the screen.

  Is there a way to reset it, or does go back to the shop?

  Good morning,

  I would wear the printer to the store and exchange for another.

  Kind regards.

• 3520 connected usb printing but do not recognize the computer for the scans

  DeskJet 3520 used to scan to the computer.  The name of the computer used to happen on the screen of the printer when a scan of the computer asked.  It does not now.  I can't scan from the computer either.

  I am still able to print.

  I deleted all the programs associated with the printer and reinstalled everything from the Web site. Twice.

  Still, this has not fixed the problem.  I'm not very computer savy, but I'm sure that I did not interfere with the settings of the printer.

  Help

  Hey.

  Happy to know that you were able to copy. This means that imaging equipment is not broken because the scan and copy times function use the same bulbs and layered imagery. So now, we can have on the appearance of the software.

  Allows to use printing HP and doctor Scan for that matter today. It is a software developed by HP for printing and scanning with Windows software problem. You want to run the part "scan fix" the software for this problem.

  Click here to download and run the print and Scan Doctor > www.hp.com/go/tools

  If please go through this and let me know how the doctor works for you. Have a great day and looking forward to hear back on your part.

• BlackBerry smartphones can not install the Desktop Manager

  I have problems to install the latest version of desktop Manager, I have version 4.2.2.12.

  Once I have download the verision 4.6 and I save it to a fine on my PC. I try to install it but it displays an alert. that the implementation is not a valid win32 application. I tried with 4.5 and same thing happens, someone can help me?

  Thank you

  Hi Adrianvh,

  This package worked for me that I find to be extremely stable with XP 4.5:

  Use this link to uninstall the current DM

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub...

  Download DM 4.5 without Media manager. MM is very unstable:

  https://www.BlackBerry.com/downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22

  Download USB drivers for 4.5

  BlackBerry USB and Modem ENG pilots (DM4.5 B13)

  • File size: 12,33545 MB
  • Date of publication: 24 June 07
  • Download Software

  Here is the Manual:

  http://NA.BlackBerry.com/eng/deliverables/3392/Desktop_enterprise_45_final_492431_11.PDF

  Cold start the PC. Tour of all the ladies of virus and firewall.

  Install the DM and configure for Outlook.

  Thank you

  Don't forget to adjust your thread. Put the check mark in the green box containing your answer! Thank you

• Gadgets not working is not on the desktop.

  I am able to click on a gadget "clock" on the desktop, but can't set the clock to the correct time and location

  Hello

  1. do you get an error message?
  2. don't you make changes to the computer before the show?
  3. what version of Windows is installed on the computer?
  4. what happens when you try to set the time and place?
  
  Method 1:
  I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  
  Method 2:

  I suggest you to see link and check.

  Gadgets Windows 7 can not work or be displayed properly
  http://support.Microsoft.com/kb/2515657

• Cannot hot plug WD 3 TB USB 3.0 hard drive in the desktop HP h8 - 1360t

  I received my new h8 - 1360t HP Office on 31 July. The OS is Windows 7 Home Premium boot from SSD. It seems to be a very good computer except for one problem: it does not recognize my WD "My Book Essential" 3 TB USB 3.0 external drive into a USB port unless the reader is connected then the computer is turned off.

  Even after that I turned on the HP with the connected drive and it is recognized, if I remove and connect then to postpone, the drive appears in Windows Explorer or Windows disc maintenance.

  Windows seems to know that I'm hot plugged a USB 3.0 device, because if I plug the drive into a USB 2.0 port, a bubble message on the screen saying I could get better performance by using a USB 3.0 port.

  The car worked fine with my old Dell Vista 32-bit office and is recognized every time that I plug it into the USB 3.0 port on my Asus laptop (also running Win 7 Home Premium 64 bit).

  HP recognises my other two drives from WD USB 3.0, a 500 GB and a 2 TB, when I'm hot their connection. I tried to use the cable from the drive 2 TB with 3 TB drive, but nothing has changed.

  The Win 7 WD SES driver is the latest version, as is the firmware of the drive 3 TB.

  I would like any suggestions to solve this problem.

  UPDATE:

  I have tried my external drives in several ports and find that they are sometimes recognised and sometimes not.  Sometimes, they do not appear in Windows Explorer or disk management, but are listed when I click the icon remove the device safely. Now, whenever I turn on the computer with the 3 TB drive plugged into a USB 3.0 port, the drive is recognized but I see the message that says: I would get better performance if I used a USB 3.0 port.  USB on this machine seems seriously screwed.

  I did the factory image recovery and my WD external drives seem to work perfectly with the computer now.

  Thanks for the link to the CMOS resets information. It may be useful if I have other problems.