Peripheral USB not opening not even if he says it's working properly

Similar Questions

• How difficult peripheral USB not recognized without restarting

  Hello

  Sometimes, when I re plug a USB 2 or 3 times, appear a notification message (unrecognized USB device...) and I have to restart my computer to make it work again.
  I want to know how to fix this problem without having to restart my computer and I don't want the solution when I uninstall all devices in Device Manager, because other usb devices can be connected and working at the same time, I can perhaps just to restart a service or kill a process...?

  Hello

  -Did you do any changes made on the computewr before this problem?
   
  Method 1: I suggest you to run the troubleshooter in the below mentioned link and check.
  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Method 2: I suggest update you also the chipset and other drivers from the website manufactuerr and check.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  For reference:
  Tips for solving problems with USB (Applicable for Windows 7) devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
   
  Hope this information helps.

• Peripheral USB not working not not after changing ports

  Former title: VISTA: Deviceinstallation works only, when you logged in with administrator rights

  Hello

  I have a big problem. Install us Vista and all devices are working properly.

  BUT, if move us the pc somewhere else and put the peripherals (keyboard, mouse) other USB ports (not the same when installing) they will be broken down. It is necessary to log on as a user with administrator with PS2 Keyboard. Then the will of identified devices and a window for the installation of the device. After installation of all devices are working properly. The devices are standard usb keyboard and usb mouse.

  Someone has an idea?

  Thank you very much.

  User1980

  Hi User1980,

  Whenever you connect the USB to your computer, it will first try to detect the device and load the drivers. The drivers do not get loaded unless you are logged on as administrator.  This is normal.

  Try running the FIXIT who can solve some problems related to hardware devices.

  Tips for solving problems of USB devices

  Bindu R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my generic bluetooth device says it's working properly but does not turn on, but my wireless is on that I have tried everything I can help please

  computer indicates that the device is working correctly, but it won't turn on?

  Hello

  Thanks for asking!

  The Bluetooth device is not activated.

  What is the brand and model of the unit?

  I suggest you follow the steps mentioned below:

  Method 1: Run hardware store

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Update the drivers

  See the site:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Error HP Deskjet F2280 peripheral USB not recognized.

  Original title: How can I get my printer recognized. When I turn my printer I get the error notice following (USB device not recognized). I'm working on Windows XP.

  It was working fine until last week when he suddenly showed the error notice. It's a HP Deskjet F2280. I've uninstalled and reinstalled it but no luck.

  Hello

  Is the issue limited to this device only or you get the message with other USB devices as well?

  Method 1: Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow the steps mentioned below:

  a. click Startand click run, type devmgmt.msc in the Open box, and then press ENTER.

  b. expand Bus USB controllers.

  c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  d. restart the computer.

  e. plug the removable USB storage device and then check if the problem is resolved.

  Method 2: Install the latest drivers

  Download the latest version of the driver from the below website and install it:

  http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=3390947#N385.

  Method 3: Update the drivers for the chipset of the motherboard

  See the following site:

  How to manage devices in Windows XP

  http://support.microsoft.com/kb/283658.

• Peripheral USB not seen - sort of

  I just installed a hard drive in a container external via USB.  I also have some other devices, such as MyPassport, mouse, keyboard and so on.

  The Control Panel recognizes the container and the disc "devices and printers".

  Why I try to locate externally with 'computer', I see my two MyPassport, but not the external USB devices.

  What I've done wrong, or how can I "fix" something?

  Thank you.

  It is not particularly difficult.  The general problem with external hard drives is that they end by moving and sometimes shaken, dropped or struck in a certain way.  Internally, these are quite delicate things.

  2.5 type "are much more delicate than the 3.5" those who are about 20 times the mass.  2.5 type disks "are much more likely to fail.

  Heat can be a major problem, according to the design of the external enclosure.  In general, very few are designed to be left turned on for more than 2 hours before they heat up too.  The heat is the greatest destroyer of all electronic components.

  You say that you have installed the reader in housing.  Be sure that it is firmly in place.

  If for some reason, the drive you have installed has become corrupted, and happens often, as I have described, it is highly unlikely that you will retrieve data from it.  However, the only hope you have is to save the hard drive, you have used physical and make usable again.

  According to your description, Windows on your computer can detect your external drive housing but may or many do not detect that there is a disc inside.  You can confirm that Windows detects the drive case, you describe AND be able to detect that there is a disc inside by following the instructions in my previous post.

  1. Right click on computer, select manage.
  2. Disk management
  3. Find your new drive

  If you do not see your drive listed there, the drive itself has failed and it is essentially waste.

  IF you do not see your drive that there are listed, you have confirmed the theory and must now:

  1. Right-click on the open space that is not initialized
  2. Choose the option that is shaped and initializes the volume

  Assuming that you can re - initialize and format the hard drive, your next step is to download and run the test software by the hard drive manufacturer to determine if the drive itself is a failure.  I can give you a link to download the correct software if you will provide a model number of the drive - print on the label on the disc.

• Driver webcam, peripheral USB not recognized?

  I have the MSI WIND U135. I use Windows XP and everytime I turn on my webcam, it comes up with the bubble yellow saying: USB device not recognized. In Device Manager, I usually have a scanner and camera tab, but I have now.  I don't know what to do. Thanks in advance for the help.

  Hello Megan, you can resolve this problem by updating the drivers...

  Download each of these files and right-click on it and click on extract all. Then go to the folder and run the Setup file and follow the instructions.
  Each of them, install in the order that they are listed below.

  1. Intel 5 Series Chipset cs_intel5series_9.1.1.1027_al00.zip
  2. Simple Face easyface_nb_all_11036.zip
  3. Simple camera app: webcamtool_vr630_xp32_nb.zip

  After installation, restart your PC, and it should work.

  If it does not, then there is a hardware failure in an integrated device. If it is under warranty, you can get it checked by the manufacturer.

• USB port problem - peripheral usb not recognized for what I plug

  When any device is plugged into usb port (ipod, camera, printer, etc.). I get the message "usb device not recognize."

  All the usb drivers have been updated, but I still receive the message.

  Hello, just for your info. I ran the patch program, but it didn't really do anything but say I had a problem with something and I had to pay someone to watch. Someone I know told me that the last thing that I had loaded several days before the problem was probably the problem. The only thing that was new was Avast program, so I uninstalled. But this does not work, I still had the usb problem before and after I reinstalled it. Also, I discovered that I had a problem to interface with Avast and after repeatedly talking about them and trying hard and it doesn't work, they wanted me to use their special program program uninstall in safe mode and uninstall Avast. So I did, then I reinstalled it and it fixed the problem to interface with Avast. Then a few hours later, I tried to use my usb ports again, just for the * of it. And quess what, they worked. Yes in some way the avast program stopped my work usb ports, when I installed it first. Avast said he couldn't have their summer program? Well it works now anyway. Thank you, Greg

• Wireless G USB adapt WUSB54GC - peripheral USB not recognized

  I'm guessing that it's version 1, because it is not any version number, written on the back...

  in any case, the adapter is used since December 2008 and had no problems before...

  it suddenly stopped working and gives the 'USB device' ball not recognized on a Vista laptop...

  I tried on another laptop and the result is the same, I tried to reinstall the drivers from the CD and that I got on the linksys website, it still does not work...

  the unit ran his life already?

  As the card is not getting detected and you have tried it on two different machines, it seems that the device is defective.

• Peripheral USB not working properly

  original title: no

  my USB doesn't work when I plug it into any device. wireless mouse or everything usb will not turn on.

  Hello

  If a PC (not a laptop) the port USB can be replaced if necessary with a card and they are not expensive.
  A laptop would need a computer store real (no leeks and glances at a BestBuy or other BigBox
  Stores) or system manufacturer support.

  Check / settings (BIOS/CMOS) often F2 when you start screensaver - make sure that the embedded USB
  is activated.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Microsoft kinect v2 - peripheral USB not recognized

  I bought a kinect v2

  When it is connected to "the USB device that you connected to this computer has malfunctioned...". »

  the Kinect v2 configuration auditor gave me this warning for the USB3 port:

  "USB 3.0 support port detected with unknown bandwidth. Kinect may or may not be compatible with your hardware.

  the kinect is the microsoft version, not the version of the xbox.

  solved! must use the cable out of the box

• Peripheral USB not recognized then try to install a new printer

  can help me to answer why the message by message "unrecognized USB device" displays when I try to connect a usb cable, when I was trying installs a new printer?

  Hello

  Usually extended as printer USB devices should be delivered with an installation CD or drivers. You should check if you have this CD, and then install the necessary software.
  In addition, you can also disable the safe option of feeding in the USB root hub properties.

• Dell V305 printer does not print anything and it used to work properly. Still scans, etc., everything will not print.

  I have a printer Dell V305 that worked very well, but I'm more able to print anything from my laptop. Scanning, etc. still works but not the printing part. I have Windows 7 64 bit. He has a solid orange light on.

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Computer laptop everything suddenly does not "see" my wireless router, use to work properly

  I have a HP laptop and it has implemented a wireless network a wireless d-Link N router.  Everything worked well for about 3 months.  Now, he can not connect.  Running the troubleshooting application to choose a connection - all my neighbors show up, but not that of my house.  The router is also new (he and laptop were Christmas gifts).   It used to work fine with Windows 7 one and now nothing...  I can't it appears in the list of wireless connections.
  My laptop 5 years running XP is in line with this router and it works fine - so I don't think that it is the router that is the problem.
  Thank you!

  Hello Bchek,

  Thank you for your message.  Check with your D-Link documentation and settings to make sure that the SSID broadcast has not been disabled.  This would prevent you from being able to see the wireless network.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• InDesign won't open; Remove preferences, uninstalled/reinstalled. Used to work properly.

  Hey all,.

  I use InDesign CC for some time and for some reason that I can't quite understand this suddenly stopped working, literally from one day to the next. I didn't install anything else, nor my computer passed through updates.

  
  I uninstalled InDesign, CC update to the latest version and reinstalled InDesign, and it still not open. I've deleted preferences and cache without result.

  I am on Windows 7 and when I look at my task manager after the application is closed, I see that it never closes completely. He's always sitting. This is getting very frustrating that I have a client project that I am currently unable to complete, and I am paying for InDesign CC and cannot use it.

  I would appreciate any insight. It's really driving me crazy.

  Thanks a lot for your time!

  (Error attached.)

  

  Looks like the same problem that Adobe InDesign CC 2015 - program stopped working

  Do you understand my answer here?