Peripheral USB not working not not after changing ports

Similar Questions

• keyboard and trackpad not working not not after changing the processor and motherboard

  After have changed the card motherboard and CPU for my dell latitude e6420, my keyboard and trackpad stopped working, there was no hard drive in the system, but external keyboard works and internal system in and trackpad worked perfectly before the changes. is this because the drivers have not been installed or what? or because it's a new motherboard? I can't access bios and it gives pxe - e61 media test failure of the cable

  later, I put a hard drive and still the keyboard and palmrest didn't always work. but again, I changed the jury and everything works fine!

• Peripheral USB not opening not even if he says it's working properly

  When I insert the USB into the computer, a message appears saying that it works successfully and has been inserted correctly, but there is no icon on the screen to open it!  It has not been damaged in any way, and was able to be open very well one day but then just stopped working for no apparent reason.  Help, please!

  You might be out of luck if this flash drive does not work on any computer that you plug in. However, this link might help you.
  http://www.WikiHow.com/repair-a-USB-flash-drive

  Good luck!

• Peripheral USB not working properly

  original title: no

  my USB doesn't work when I plug it into any device. wireless mouse or everything usb will not turn on.

  Hello

  If a PC (not a laptop) the port USB can be replaced if necessary with a card and they are not expensive.
  A laptop would need a computer store real (no leeks and glances at a BestBuy or other BigBox
  Stores) or system manufacturer support.

  Check / settings (BIOS/CMOS) often F2 when you start screensaver - make sure that the embedded USB
  is activated.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Working space and the planning of the URL does not not after change of IP address

  Hi all

  I use 11.1.2.1 and recently the IP addresses of the servers have changed. Because of this schedule and the workspace URL does not work, although EE and shared services work. If I run the URL of space working everything freezes (EAS and shared services) and I have to stop/start services.

  Please suggest how to solve this problem.

  Thank you

  MK

  Well there is your problem then

• Equium A100 - 338 PSAAQE: shortcut keys not working not not after changing Vista to XP

  I recently bought a PSAAQE Equium A100-338. It came preloaded with Vista home premium. I removed what I need XP pro. I found all the drivers to get everything works except the shortcut keys. I tried all the drivers available, but none works. Are there other drivers available for the access keys work.

  Can anyone provide a url to a site where I can get the driver. Also, why are there no XP driver specific available, it took forever to find all those that I needed. I know a lot of it, specialists and companies that will not use Vista and only allow for XP.

  For these features, you have no drivers but Toshiba has designed tools or utilities, but I fear that these tools are not designed for Windows XP Home edition. Not yet.

  I believe you when you say that to many it professionals want to use Windows XP Home edition, but if everything works well, but these buttons are not so important to the features of the laptop and any computer can do its job.

• Enterprise Manager not working after changing port listener

  Hello
  
  I have Oracle 11g on Linux. I installed the Manager of the company at the time of the installation of the database. Database listener configured on port 1521.
  
  I tried to change the default port of 1521 to 4051. I stopped the listener, the port has changed in the listener.ora and also tsnnames on clients.
  We can connect to the database using sqlplus/sqldeveloper client tools.
  
  When I tried to launch Enterprise Manager, I could not connect (connection error failed)
  
  I scoured the forums of discussions, I realized (read) that I need to change the port number in the Enterprise (targets.xml, emoms.properties) configuration files. I then changed to the new port.
  Arrested agent, stop the dbsoncole, then restart them.
  
  Now I gat page not found when I run the company Manager.
  
  Help is very appreciated.
  
  Murali K

  :)

• Driver webcam, peripheral USB not recognized?

  I have the MSI WIND U135. I use Windows XP and everytime I turn on my webcam, it comes up with the bubble yellow saying: USB device not recognized. In Device Manager, I usually have a scanner and camera tab, but I have now.  I don't know what to do. Thanks in advance for the help.

  Hello Megan, you can resolve this problem by updating the drivers...

  Download each of these files and right-click on it and click on extract all. Then go to the folder and run the Setup file and follow the instructions.
  Each of them, install in the order that they are listed below.

  1. Intel 5 Series Chipset cs_intel5series_9.1.1.1027_al00.zip
  2. Simple Face easyface_nb_all_11036.zip
  3. Simple camera app: webcamtool_vr630_xp32_nb.zip

  After installation, restart your PC, and it should work.

  If it does not, then there is a hardware failure in an integrated device. If it is under warranty, you can get it checked by the manufacturer.

• USB port problem - peripheral usb not recognized for what I plug

  When any device is plugged into usb port (ipod, camera, printer, etc.). I get the message "usb device not recognize."

  All the usb drivers have been updated, but I still receive the message.

  Hello, just for your info. I ran the patch program, but it didn't really do anything but say I had a problem with something and I had to pay someone to watch. Someone I know told me that the last thing that I had loaded several days before the problem was probably the problem. The only thing that was new was Avast program, so I uninstalled. But this does not work, I still had the usb problem before and after I reinstalled it. Also, I discovered that I had a problem to interface with Avast and after repeatedly talking about them and trying hard and it doesn't work, they wanted me to use their special program program uninstall in safe mode and uninstall Avast. So I did, then I reinstalled it and it fixed the problem to interface with Avast. Then a few hours later, I tried to use my usb ports again, just for the * of it. And quess what, they worked. Yes in some way the avast program stopped my work usb ports, when I installed it first. Avast said he couldn't have their summer program? Well it works now anyway. Thank you, Greg

• How difficult peripheral USB not recognized without restarting

  Hello

  Sometimes, when I re plug a USB 2 or 3 times, appear a notification message (unrecognized USB device...) and I have to restart my computer to make it work again.
  I want to know how to fix this problem without having to restart my computer and I don't want the solution when I uninstall all devices in Device Manager, because other usb devices can be connected and working at the same time, I can perhaps just to restart a service or kill a process...?

  Hello

  -Did you do any changes made on the computewr before this problem?
   
  Method 1: I suggest you to run the troubleshooter in the below mentioned link and check.
  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Method 2: I suggest update you also the chipset and other drivers from the website manufactuerr and check.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  For reference:
  Tips for solving problems with USB (Applicable for Windows 7) devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
   
  Hope this information helps.

• Skype does not not after change avatar

  Hello. I tried to change my avatar today and suddenly a window pops up that says that Skype does not work. I wiped Skype on your computer using Revo Uninstaller and then I installed. And again the same problem. Sorry for my English.

  Looks like your webcam Microsoft LifeCam VX-1000 is not properly installed or the drivers are corrupt. Try to reinstall the drivers for this webcam.

  http://www.Microsoft.com/hardware/en-us/d/LifeCam-VX-1000

• Error HP Deskjet F2280 peripheral USB not recognized.

  Original title: How can I get my printer recognized. When I turn my printer I get the error notice following (USB device not recognized). I'm working on Windows XP.

  It was working fine until last week when he suddenly showed the error notice. It's a HP Deskjet F2280. I've uninstalled and reinstalled it but no luck.

  Hello

  Is the issue limited to this device only or you get the message with other USB devices as well?

  Method 1: Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow the steps mentioned below:

  a. click Startand click run, type devmgmt.msc in the Open box, and then press ENTER.

  b. expand Bus USB controllers.

  c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  d. restart the computer.

  e. plug the removable USB storage device and then check if the problem is resolved.

  Method 2: Install the latest drivers

  Download the latest version of the driver from the below website and install it:

  http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=3390947#N385.

  Method 3: Update the drivers for the chipset of the motherboard

  See the following site:

  How to manage devices in Windows XP

  http://support.microsoft.com/kb/283658.

• Wireless G USB adapt WUSB54GC - peripheral USB not recognized

  I'm guessing that it's version 1, because it is not any version number, written on the back...

  in any case, the adapter is used since December 2008 and had no problems before...

  it suddenly stopped working and gives the 'USB device' ball not recognized on a Vista laptop...

  I tried on another laptop and the result is the same, I tried to reinstall the drivers from the CD and that I got on the linksys website, it still does not work...

  the unit ran his life already?

  As the card is not getting detected and you have tried it on two different machines, it seems that the device is defective.

• Product key Windows 8 Pro does not not after change of laptop hard drive

  Hello! I have a Dell Inspiron computer 15R laptop with Windows 7 Home Basic Edition pre-installed. I bought Windows 8 Pro Windows upgrade plan offer. The product key I got worked before my laptop hard drive crashed and changed by Dell. How can I solve this problem?

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  
  

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• E-mail does not not after changing name servers

  Hi, I just went live with my site and change the name servers of servers of names Adobe Business Catalyst and since that time my emails do not work. We understand the problem that Adobe needs to update their MX records pointing to my server provider, however I just can't keep them urgent. I tried to find their phone number and for the life of me that they don't make it easy at all. Can someone please help that I can communicate with a phone number at all? I have completed 2 support tickets but just don't feel confident that it will get thanks to their very fast at all. I have a company of runa nd that my clients are unable to send me. Help, please!

  Hi rachmac,

  I answered your ticket.

  See you soon.