Peripheral USB works intermittently on XP computer at startup. the Office of other problems, why?

There are three 7 port usb hubs in a string, (all connected each), first of all, one from the computer, more a fourth with four ports connected to a Dell usb keyboard, which itself is connected to one of the hub 7 ports.

Sometimes the lights mounted on all four centers, but it's a matter of holding your breath until he died which means the devices connected to them also does not work.

Only one connected in the light of the computer is turned on, but even in this case, devices attached (like a usb keyboard), does not always work. They are all 2.0 but the computer is 1.0 I believe.

On the desktop, they usually receive regular work but the desktop freezes, BSOD and endless error messages, especially during video playback or attempt to use the webcam in reports.

Discovered today that you must enable USB in the bios. So far, who has worked, which means that there is no error reports or BSOD, nagging but the computer has not been extinguished at all since finding this out is the answer or is this something else?

* There is another PS/2 keyboard and a mouse that is always attached now especially when you use a CD, (like XP). have to use the boot CD 'aid' like Acronis or having to access something in the bios, these devices are the only things that work like computer starts.* *.

* Haven't had no idea where to put this, but the defalult was, "Performance and Maintenance", which I don't have on my computer so I just guess he's right.

Thank you, but do not want to touch the registry.

Never did not understand why he has often given it as a resolution, knowing he could totally botch a computer novice would have no idea how to solve this problem. His pan to the fire.

Anyway thank you all for having tried to prevent him from thinking that the problem is resolved.

It seems to enable USB in BIOS, it set as the hubs knitting every time and no. become as much error messages.

Takes some time in the BIOS, but it is nowhere as long as it was and now the ps/2 keyboard and mouse connected helps again.

Tried using usb ps2 adaptors but they were next useless.

Too bad, if they had worked, probably would not need other HID devices as backup :/

Tags: Windows

Similar Questions

  • I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates.

    Thank you for taking the time to read this. I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates. I thought I would do a clean install of Windows XP, install my Microsoft Works again and nothing else. I would like to effectively transforming my computer into a word processor. He continues more and more slow. I get blue screen errors, once again. I received excellent Microsoft Support when it happened before, but since my computer is around 13 years, I think it is not worth the headache to try to remedy. I ran the Windows 7 Upgrade Advisor, and my computer would not be able to upgrade. Please, can someone tell me how to make it only a word processor without updates or internet connection? (I already have a new computer with Microsoft Windows 7 Home Premium, it's the computer that I use. The old computer is just sitting there and once a week or so I updates.) I appreciate your time, thank you!

    original title: old computer unstable

    http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

    http://www.WindowsXPHome.WindowsReinstall.com/sp2installxpcdoldhdd/indexfullpage.htm

    http://aumha.NET/viewtopic.php?f=62&t=44636

    Clean install XP sites
    You can choose which site to reinstall XP.

    Once it is installed, then you do not have to connect what anyone, however, some updates may be required to perform the work, test this by installing work and see if you get an error msg. Except that you should be fine.

  • DVD work only after running Fix It at the office.

    I'm having a problem that affects all of a sudden my desktop computer. So, I have a bunch of DVD, all working on my laptop (W7). However, some of these DVDs do not work on my desktop (W7) for some reason any. They do not work as nothing is recognized on my computer. It's as if there is no DVD inside. DVDs that don't work on this computer are not random - it's always the same DVD. Something interesting about this problem, it is the DVD would work if and only if I run the troubleshooter Fix it. say so, I use the troubleshooter and the DVD starts to play, by removing the DVD and re - insert does not work. I have to raise difficulty for this.

    Hello

    Thank you for keeping us posted.

    I would suggest trying the following methods and check if it works.

    Method 1:

    Please install all the latest updates including the optional updates in the system and check if it works.

    To install the updates, please follow the steps in the link provided below.

    Install Windows updates in Windows 7

    http://Windows.Microsoft.com/en-in/Windows7/install-Windows-updates

    If the problem persists, follow method 2

    Method 2:

    You can check the manufacturer's Web site and try to install the latest drivers from CD/DVD and check if it helps.

    I hope this information is useful.

    Please let us know if you need more help, we will be happy to help you.

  • Internet connection is unreliable - when a wireless computer connects to the network, all other stands and the router needs to be reset

    I have a home wireless network with a new router Belkin (no separate modem). There are four laptop computers in our House, which connect to the wireless network. One of them is Windows 7, both Vista and the other is XP.

    Sometimes the internet works perfectly well and all four laptop computers are able to connect simultaneously. But more often... when a new laptop is on and attempts to connect, all current laptops get kicked out of the network all together and are unable to reconnect. The network broadcasts always and appears in the list of available networks, but we are unable to connect.

    Other times, if my roommate is very well on the internet and I turn on my laptop, I can't see even the network, despite the fact that it is to use! If I turn the router off and on again (sometimes we do this several times) it works OK again.

    Sometimes this happens several times a day, other times we go days without having to reset. The problems are more frequent when the old Vista laptop is used which is what made me think it may be related to computers (or their settings) rather than the router.

    Thank you

    Alex

    You may need to check every laptop and the router, to be sure.

    Go to the website of the manufacturer of your Belkin router > make sure you have the latest Firmware for it.

    Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

    Troubleshoot network adapter problems to Microsoft link above.

    Try without commitment TCP/IPv6:

    If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

    http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

    See you soon.

    Mick Murphy - Microsoft partner

  • My internet connection works fine and I can access all the links except facebook. Why is this happening?

    Everything works ok in my internet connection.  But I can't connect to facebook.

    You will find support for your problems of connection in the appropriate forum of networking: http://answers.microsoft.com/en-us/windows/forum/networking

    You will find support for Internet Explorer in this forum: http://answers.microsoft.com/en-us/ie

  • How to turn the computer back at the office after sleep?

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: this is the 1 time I use the function slee...

    • I don't know how to get back on the desktop after using sleep.i cannot find any button to return, as seen as running off.whay should I do...
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    Usually just move the mouse or using the keyboard wake it.

    1 I want to erase the General corruption and repair/replace damaged/missing system files:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------

    Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
    similar are not enabled.

    Shoot sleep problems - hibernation
    http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

    How to solve a problem of Mode for Vista and find a Solution
    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

    How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

    How to restore the default power in Vista (and then go back and change as you wish)
    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
    http://support.Microsoft.com/kb/950686

    Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
    and other devices. (Double click on the device and the power management tab)

    All the default power plans and then set them as you wish.

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Why my computer connects to the wifi via time capsule, but not my iphone, ipad or smart tv?

    Yesterday, there was an internet outage in my area. Eventually he returned to the top, but I could not always connect. I phoned by internet service provider and finally they got it working, except now my computer connects to the wifi, but my iphone, the ipad and the smartTV won't. I use a time capsule to connect. Help, please!

    This modem do you have? Brand and model please.

    It is configured as a router or bridge?

    There is a good chance that the TC I messed up in the trouble... It happens.

    Back to the factory and repeat installation... no file is lost it doing.

    Who is your ISP? What kind of services to wide band?

  • When I turn on the computer, the screen indicates "a problem has been detected and windows has shut down to prevent damage to your computer.

    Original title: when I turn on the computer.

    the screen shows "a problem has been detected and windows has shut down to avoid damaging your computor.

    Hi Cjdaniello,

    ·         Did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Step 1: Start in safe mode and check if the problem persists.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    I hope this helps.

  • Computer will not conduct the office and cannot enter the Bios.

    Original title: cannot get into the BIOS

    When I turn on the computer, the logon screen is shown with details of the computer.  The computer won't proceed beyond this point.  So I can't enter the BIOS when I press the DELETE key and there is no way the computer goes to the office.    What can I do?

    Hi Ivor,

    1. you receive messages or error codes when you try to start in normal mode?

    2. did you of recent changes on the system?

    Usually, you must press a key (for example, F2, F12, DEL, ESC) or a key combination whenever you turn on your computer but before Windows starts. The choice of the function key varies depending on the brand of your computer.

    For more information, you can consult the following article:

    BIOS: Frequently asked questions

    If you are unable to boot into normal mode, then check if you can boot into safe mode and let us know the results to proceed to further troubleshooting.

    You can view the following items to start in safe mode.

    Startup options (including safe mode)

    Start your computer in safe mode

    Hope this information is useful.

  • peripheral USB audio does not work with Firefox. works fine with IE. Anyway I can get it to work with Firefox?

    Its a Dell usb sound bar. When streaming video through firefox, no noise. I don't hear the sounds of the general system. The usb sound bar works very well when streaming video through IE. Any advice would be helpful. I'm pretty computer illiterate, so the simple, better!
    Thank you.

    This may happen for security. try to download https everywhere and add in fire Fox. can solve the problem.

  • Satellite Pro M70: removal of the USB device causes other peripheral USB does not work

    Withdrawal/use of a USB for a USB device causes devices on USB port to get affected.

    Satellite Pro M70-199 (2 GB RAM)
    Windows XP Pro (SP2) with all updates of Windows installed until end of October 2006.
    This laptop has 3 USB ports.
    An Eicon Diva ISDN USB modem is connected to a USB port.

    When certain devices connected to a different USB port are deleted (even if removed safely with "eject" or "remove device safely", it causes the ISDN modem to file either a double channel (64 k + 64 k) ISDN, or for the ISDM modem to disconnect completely.)

    Cause this include any memory stick USB, MP3 player (ipod and creative zen) and so on.

    Do other devices, such as USB external hard drives & sometimes external DVD USB drives, and sonetimes do not produce this problem.

    Is this a known issue?
    If it is a hardware interrupt problem, how to solve it?
    This problem is related to the modem and the laptop?

    As a note, in addition, intermittent (random) times (cannot reproduce all the time, but it happens once or twice a day) when a USB device is accessible it causes the modem USB ISDN to drop a single channel, even if the lights on the modem still show it as it is connected. In this case and the case above, the only way to get the modem ISDN USB running again is physically disconnect and reconnect.

    The reason why it is a crucial issue is that:
    (1) the modem speed is halved or disconnected
    (2) the ISP continues to full rate for a double load connection even if a channel has been dropped.

    Any help will be greatly appreciated.

    Here is some information on USB devices, followed by some information about IRQ settings.

    Driver date 01/07/2001
    Version of the driver 5.1.2600.2180
    Driver provider Microsoft
    File INF usbport.inf

    Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
    Location Information PCI bus 0, device 29, function 0
    PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
    Device resources
    IRQ 23
    Port 1800-181F

    Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
    Hardware ID PCI VEN_8086 & DEV_2659 & SUBSYS_FF001179 & REV_03
    Location Information PCI bus 0, device 29, function 1
    PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
    Device resources
    IRQ 19
    1820-183F port

    Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
    Hardware ID PCI VEN_8086 & DEV_265A & SUBSYS_FF001179 & REV_03
    Location Information PCI bus 0, device 29, function 2
    PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
    Device resources
    IRQ 18
    Port 1840-185F

    Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
    Hardware ID PCI VEN_8086 & DEV_265B & SUBSYS_FF001179 & REV_03
    Location Information PCI bus 0, device 29, function 3
    PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
    Device resources
    IRQ 16
    Port 187F-1860

    Description of the driver Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C
    Date of the driver 06/01/2002
    Driver Version 5.1.2600.0
    Driver provider Microsoft
    File INF usbport.inf
    Hardware ID PCI VEN_8086 & DEV_265C & SUBSYS_FF001179 & REV_03
    Location Information PCI bus 0, device 7 function 29
    PCI Device Intel 82801FBM ICH6-M - Enhanced USB2 Controller [B-1]
    Device resources
    IRQ 23
    Memory B0000000-B00003FF

    Description of the device resource sharing
    DMA 04 exclusive Direct memory access controller
    IRQ 00 exclusive system clock
    IRQ 01 exclusive Standard 101/102 key or Microsoft Natural PS/2 keyboard
    IRQ 08 exclusive system CMOS/real time clock
    IRQ 09 shared system compatible ACPI Microsoft
    IRQ 11 shared Intel (r) 82801FB/FBM SMBus Controller - 266 a
    IRQ 12 exclusive pointing Alps-device
    IRQ 13 exclusive Numeric data processor
    IRQ 14 exclusive Primary IDE Channel
    IRQ 16 shared generic CardBus controller
    IRQ 16 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
    IRQ 16 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2662
    IRQ 16 shared Mobile Intel (r) 915GM/PM Express PCI Express Root Port - 2591
    IRQ 16 shared ATI MOBILITY RADEON X 700
    IRQ 17 shared Realtek AC97 Audio
    IRQ 17 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2660
    IRQ sharing 17 Texas Instruments PCIxx21 Integrated FlashMedia Controller
    IRQ 18 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
    IRQ sharing 18 Texas Instruments OHCI Compliant IEEE 1394 Host Controller
    IRQ 19 shared host controller Standard SD compatible SDA
    IRQ 19 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
    IRQ 19 shared Intel 82801FBM Ultra ATA Storage Controllers - 2653
    IRQ 20 shared of TOSHIBA software modems
    IRQ 21 shared Realtek RTL8139/810 x Family Fast Ethernet NIC
    IRQ 22 shared Intel (r) PRO/Wireless 2200BG Network Connection
    IRQ 23 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
    IRQ 23 shared Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C

    Post edited by: sakhri

    Hello

    I have Satellite M70-159 and I didn t notice any strange problems with the USB ports. I use a few of them as printer, webcam, USB, memory stick, optical mouse, and external HARD drive. The devices are recognized correctly and I always remove without option delete without danger.

    Now I have Vista pre-installed and there is no problem so far. If I understand you right USB ports work fine but there is problem with USB modem only. Am I wrong?
    Also try to contact the producer of modem support. Is perhaps the question like this known and if all goes well, they have a logical explanation.

  • Peripheral USB do not work correctly on the Satellite M40 313

    I have a Satellite M40 313 I bought there are about 1 1/2 years and have had some problems with.

    However, I recently bought a Canon S3 IS and a Buffalo portable HD here in Japan, where I currently work.
    These two devices do not work with my computer.

    Attach the HD produced the message that this device will work better with a USB 2.0 high speed Port, before XP decides that the HD is actually a keyboard HID device! The camera mount, for which I had installed the software provided, will produce a message that suggests that I have install usbscan.sys file and forces me to use a driver of generic digital camera that does not work with the Canon camera.
    I fetch the requested file, but it made no difference...

    It seems that it is a problem of USB, and I also noticed that some of my friends devices USB do not work well with my computer.

    In this case, what is the best way to update my software so its compatible USB? Have I been dismantled down to the USB 1.1 version by WIndows at any given time? The pilot on the hub root 5.1.2600.2180 and is dated 07/01/2001.

    Any suggestion is appreciated.

    Hello

    Perhaps a biosupdate could help you? I mean it s do not know if is it a hardware problem or software, so that you can first try to check if it s a software linked history by:
    1.), updated the Bios
    2.) recover the system with the recovery cd (backup your data first!  ;))
    3.) install the latest drivers (do not install MS updates or patches, sometimes they cause errors)

    If you have no success after completing these steps, and then give a few comments.

    Welcome them

  • How to enable the USB Support after that it disappeared from all USB keys on computer, so that the Webcam & printers no longer work?

    My Canon printer and my HewlettPackard printer-copier-Scanner, as well as my Web Cam just stopped working, and when I checked the Device Manager, I found that (IP), (PPPOE) WAN Miniports and (PPTP) had all of their disabled drivers.   I'm unable to re - activate these drivers, and my Web Cam and printers were not included.    Restoration of the system, and many re - start didn't help.  Microsoft Fixit did not help.   Can someone please help me solve these problems?

    Hi WaggaJohn,

    1. What happens when you try to activate?
    2. You receive an error message?
    3. What happens when you connect the webcam to the computer?
    4. How the printers are connected to the computer?
    5. You are able to use other USB devices on the computer?

    The WAN Miniport driver on Windows XP system allows to connect to some networks such as networks wireless large-scale.

    Method 1

    I suggest that you uninstall all the software driver for the webcam and the printer to the computer using Device Manager and Add/Remove programs and then reinstall the updated driver from the printer manufacturer website and check if it helps.

    How to change or remove a program in Windows XP

    http://support.Microsoft.com/kb/307895

    How to manage devices in Windows XP

    http://support.Microsoft.com/kb/283658

    Method 2

    If no USB devices are running on the computer, then I suggest that you uninstall and reinstall all the computer USB controllers and check to see if it helps.

    (a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.

    (b) click on the hardware tab.

    (c) click the Device Manager button.

    (d) expand Bus USB controllers.

    (e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

    (f) restart the computer to Windows reinstall all USB controllers on the computer.

    Check if the problem persists.

  • USB device not recognized. -"peripheral USB attached to this computer has a malfunction and Windows does not recognize it."

    My phone displays a warning that a "peripheral USB attached to this computer has a malfunction and Windows does not recognize it." I uninstalled the only devices that I had (printer and bluetooth) but still this warning. Can anyone help.

    Mike S.

    I suggest to take a look at the following Web sites and follow their advice:

    http://support.Microsoft.com/kb/871233

    http://support.Microsoft.com/kb/310575

    http://support.Microsoft.com/kb/314464

  • Peripheral USB not working properly

    original title: no

    my USB doesn't work when I plug it into any device. wireless mouse or everything usb will not turn on.

    Hello

    If a PC (not a laptop) the port USB can be replaced if necessary with a card and they are not expensive.
    A laptop would need a computer store real (no leeks and glances at a BestBuy or other BigBox
    Stores) or system manufacturer support.

    Check / settings (BIOS/CMOS) often F2 when you start screensaver - make sure that the embedded USB
    is activated.

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------

    Then lets refresh the USB stack

    Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
    all except the category itself - REBOOT - it refreshes the drive and battery USB

    This KB shows XP how to and the method of Vista is identical
    http://support.Microsoft.com/kb/310575

    ----------------------------------------------

    If necessary try these two:

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or not working - Mr. Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Maybe you are looking for