Permissions of third-party software does not. Help, please

Similar Questions

• Third party material does not work on iPad 2 Air

  I recently brought an iPad 2 Air, but it was found that some of my third-party devices do not work with it. I also own an iPad mini, so I try the equipment on the mini, it works. I've been worrying is that my iPad 2 Air was a problem of equipment causing it or what. Two iPads running iOS 9.3.1.

  My Equil Smartpen 2, it can connected on bluetooth, but the software does not recognize that the pen was connected.

  My I-Flash Drive have the same problem, the software does not recognize it and hang.

  No matter what iPad 2 Clean Air there have the same problem, or should I send it for repair?

  Denny Lee

  First of all, I would like to try a reset by pressing the power and Home keys until the Apple logo appears.

  If this does not work, I suggest that you visit an Apple store (with all your gear) and ask them to test/diagnose the problem.

  Barry

• Third-party applications does not not on Apple Watch

  After that more than a month, I bought the Apple Watch, still a lot of apps from third party (such as Facebook Messenger, swarm, Skype or GoPro) do not work on the watch. Most of them keep loading or crash after a few seconds.

  He feels like a failure a lot of the features of my Apple Watch because these applications do not work.

  You need to download apps that are compatible with your Apple Watch. You have updated to the latest version of watchOS 2?

• width of 100% does not, help please?

  

  I hope that this picture will help to show the problem I have, I will paste the code I up this just in case it is not readable in the picture also.

  I'm working in Dreamweaver CM³ (updates) on a 64-bit Windows 7 platform.  I built a dozen web sites in dreamweaver, so I'm not an expert, but I'm not either totally distraught.  I did what I'm trying to do on other sites, I'm completely stumped on what I'm doing wrong here.  Any help is appreciated!

  So, it's the intro!  Here's what I'm trying to do:

  I want three background divs that are stacked on each other, with three of them covering 100% of the screen, regardless of the size of the screen (have not implemented for media queries yet go smaller, right now just trying to put it so circles fill all the screen sizes)

  If the top bar is the Tan, then the central bar is dark brown, and the lower bar is yellowish.  At the beginning I did not apply any width of 'body', but I tried to set it to 100% as well.  Each of the three background divs have been added then, and all three were set at 100%, with an image in the background (for texture and color) set to repeat everywhere.

  No matter what I try, the three bars appear to have a limit of about 740 pixels width.  It is not a setting I've ever created, and I started the page as an html page empty - not any model.  I can't find which requires this setting width on these items.

  Here's the weird thing... it really works on a big screen - the bars go all the way through... it's on small screens (my test of fifteen inches, my iphone, the ipad screen monitor) that the background is not going anywhere!

  The image in the header (all images are just an image) is 1280 pixels.

  I'm sure someone will point me to something that makes me slap my forehead in total embarrassment, but I would gladly take the humiliation of being able to move forward on this project!  Help?

  Thank you

  Michelle

  I did something like this for a client project (view source to see the code):

  http://ALT-Web.com/test/LHS-test.html

  Nancy O.
  

• Wireless does not HELP Please

  Just today my wireless worked perfectly no problems at all. And then I'll be back from College 4 hours later and it seems not to work more, I called cisco and they want to charge me to fix it, and I don't have the money for it. I tried reseting the router (by pressing the small button with a paperclip for 30 seconds). And I also unplugged and plugged back in and still nothing. I called my internet provider and my modem works fine (im actually writing this with my laptop plugged directly on the Ethernet modem).  Could you guys help out me? exams are coming and I can't continue to take turns using the internet with other people in my house, and I can't continue to go to the library to study and do homework. Thank you, you have no idea how grateful ill be if this is resolved btw, I have a cisco linksys E2500 series wireless router

  If you have an extra ethernet cable, you can reconfigure the router manually. For step by step instructions you can check homesupport.cisco.com. You can also download this Web site configuration wizard.

• Legal rights with third-party software?

  Hello, I was wondering how it works when buying an older version of flash professional from a third party source, for example purchasing a license of ebay. How does legally? Can I use the program to produce content/images/animations that belong to me and may be sold by me?

  If you legally acquire an adobe product, you are allowed to keep any product with this product and all the income/products resulting from what your products.

  but most of the time, 3 rd party software does not come with a license legally transferred.  most sellers do not know the necessary steps to transfer a license from one person to the next, transfer an Adobe product license

• I have uninstall it by accident with Adobe Acrobat PRO DC with third party software.  Now I can't install Adobe and creative cloud does not load apps.  How a fix it?

  I have uninstall it by accident with Adobe Acrobat PRO DC with third party software.  Now I can't install Adobe and creative cloud does not load apps.  How a fix it?

  Hey bellmarg,

  Please uninstall Adobe CC using this cleanup tool use the Adobe Creative Cloud cleaning tool to solve installation problems, restart your computer & reinstall it using this link Adobe Acrobat Pro DC: PDF Converter, convert PDF files from anywhere.

  Let me know how it goes.

  Kind regards

  Nicos

• What would cause third-party software not to install if Windows Installer is running and up to date, and the PRC is launched?

  Still trying to install a printer from Eastman Kodak to a computer that was just recovered. I have new versions of Windows Insataller and the third-party software for the printer. However, even when I put the installer on "automatic" and "start" the service, it won't stay like this. I run regedit, msiexec.exe / unregister and msiexec.exe/regserver. Nothing happened. I checked the system had full access to HKEY_CLASSES_ROOT. no problem. I ran chkdsk. Hard drive looks very good.

  I need a response that I'm getting a little irritated that something as simple as install a printer should take this amunt of work. Oh, BTW, running Windows XP Home Edition, 2004 computer version. I don't know if this helps or not. The only thing I'm NOT willing to do is another system of recovery. That's how I got here in the first place. So, if anyone out there has suggestions, ideas (no matter how strange), ar solves this problem, I would greatly appreciate a response.
  Thank you
  songtothesirens

  Hello

  Re-install Windows Installer and see if it helps.

  Error "Windows Installer service could not be accessed" occurs when you try to add or remove a program in Windows XP or Windows Server 2003

  Note: Run method 2 from the above link.

  Hope this information helps.

• LightScribe software does not recognize my DVD LightScribe drive. Can help any one? __

  LightScribe software does not recognize my DVD LightScribe drive. Can someone help?  I belive what happened after I enstalled Windows 7!

  Have you installed the latest http://www.lightscribe.com/downloadSection/windows/index.aspx?id=810 Lightscribe system software

• Fingerprint software does not recognize my fingerprints

  Hello

  I installed the 64-bit Windows 7 (using cd upgrade upgrade to win7 program)
  Installed all updates (windows)

  However, fingerprint software does not recognize my fingerprints-. -.
  The first two are fine, but the third party never works, it's the same story for all my fingers...

  I HAD the program works perfectly until I reinstalled my OS
  For some reason, I remember the same problem last time I had to reinstall, do not remember what I did to remedy

  any advice?
  Thank you for your time and help!

  Edit:

  To add a few details:
  It worked before
  The hardware is not the issue (he reads my fingers)
  It is software or just my DNA changes my fingerprints-. -.
  I can't remember which version of the software / I downloaded the last time, but I find the latest software online on this site and found

  In addition, the FACE program does not work either
  He was working before I reinstalled the operating system
  Is it just me or all the security programs like simply not me-. -.

  Hello

  In your case, I recommend you remove all traces of fingers first.
  Then, uninstall the software and clean the registry with CCleaner.
  Then download the new software for fingerprint for the computer laptop and Win 7
  After that, scan and configure the fingerprints once more.

  In regards to the face recognition software;
  You must uninstall this too and need to download the latest version of this software for Win 7

  Good luck

• Uninstall third-party software

  Hello. When I install software that requires simply by dragging the applications icon in the 'Applications' folder, I feel comfortable just by dragging it to the trash if I don't want. But when an application uses a Setup program I did not. The application that worries me particularly (but also other applications installed) is "Tune Up My Mac". I unintentionally installed its developers because he FRAUDULENTLY"portrayed as free. Yes, it is free to download, but it costs $40 to use it. And it runs automatically whenever I start my computer and gives me a hard time when I try to stop it. I don't have $ 40 to spend on it, even if I thought it was worth. So can someone please tell me how safely and completely get rid of it? TIA

  Any software, no matter from where it comes, which aims to 'clean up' or 'speed up' a Mac automatically is a scam.

  Any third party software that is not installed on the App Store or by drag-and - drop in the Applications folder and uninstall by drag - move to the trash, is a modification of the system.

  Whenever you delete changes to the system, they must be eliminated completely, and the only way to do this is to use the uninstall tool, if any, provided by the developers, or follow their instructions. If the software has been removed incompletely, you may redownload or reinstall even to finish the job.

  I never install modifications of the system myself, and except as stated in this comment, I do not know how to uninstall them. You'll have to do your own research to find this information.

  Here are some general guidelines to help you get started. Suppose you want to remove the so-called "BrickMyMac" (a hypothetical example). First of all, menu using the product, check if there is one, for instructions. Not finding here, look at the Web site, let's say www.brickmymac.com. (Maybe it's not the name real site, if necessary, search the Web for the name of the product). If you don't find anything on the Web site or in your search, contact the developer. While you are waiting for a response, download BrickMyMac.dmg and open it. There may be a request here as "Uninstall BrickMyMac." If this is not the case, open "BrickMyMac.pkg" and look for an uninstall button. The uninstall program can also accessible by clicking on the button customize, when one exists.

  Back up all data before making any changes.

  Generally, you will need to restart the computer in order to perform an uninstall. Until you do this, there may be no effect, or the unpredictable effects.

  If you can't remove the software in any other way, you will have to erase and install OS X. Never install any third party software, unless you're sure you know how to uninstall in the contrary case, it can create problems which are very difficult to solve.

  Try to remove the complex system of changes by hunting for files by name, often will not work and can make the problem worse. The same goes for 'utilities' as the 'AppCleaner"designed to remove software.

• Rearranging Drive C - can recommend Vista management computer or maybe third-party software such as the Partition Wizard.

  original title: reorganize the C drive

  I am very short of space on drive C (system disk).   I've been advised to rearrange the drive C partition, as I have a lot of space on the D drive.   What is the best way to do this without losing any data on C or by altering the system?   Can anyone recommend Vista management computer or maybe third-party software such as the Partition Wizard.

  Hello

  read this topic to regain free space on C:

  see if this program helps you to determine what is take up space

  http://www.Jam-software.com/treesize_personal/

  by default system restore will have up to 15% of the capacity of the hard disk

  you would like to reduce this amount

  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html

  http://www.vista4beginners.com/system-restore-space-used

  also use disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  also scan for malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  and read these information from microsoft on windows optimization

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  and using vista disk management you need to delete D: and extend C: into the unallocated space where D: is

  You can't fire a piece of D: on C: using vista DM

  Save all data, because it will be lost on D: and make sure that D: is not your recovery partition

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

• How to set a synth MIDI of third-party software downloaded as the default synthesizer on Windows 7 (64 bit)?

  I downloaded CoolSoft VirtualMIDISynth more Web Soundfont v1.0.  I'm unable to set up virtual machines to recognize the virtual computers.  Only GS Wavetable, as I understand it is not in the operating system.
  This is a 1 years computer with card mother i5, available on the 200 GB drive and 16 G memory.

  I am the author of Web SoundFont and I'll be happy to help you if you are having problems with my Bank and CoolSoft VirtualMIDISynth.

  I second the comment of S.V. Sissi, even if your problem is mainly with newer versions of Windows, which simply do not have the control panel you are looking for choose the default of MIDI output device to be used in all Windows applications.
  This setting was not available up to Windows XP, but with newer versions, you will need to use third party software to configure it in a friendly way. On Vista/7, you can use the combobox control, you will find under the tab "MIDI Mapper" CoolSoft VirtualMIDISynth settings window.
  On Windows 8, there is an alternative workaround available, although more difficult to apply than MS simply locked access to the MIDI Mapper to force using internal MS/Roland GS software Synth. Quite a bad decision for all lovers of noon with good hardware or software synths on their computer...
  You will find all the information you need on the site of VirtualMIDISynth (http://coolsoft.altervista.org/virtualmidisynth and http://coolsoft.altervista.org/en/blog/2013/03/what-happened-midi-mapper-windows-8).

• Compatible third-party software list

  Hi all!

  I'm trying to understand if some third party software are compatible with OS X 10.11, someone could suggest me a site/list or another document where I can always find updated compatibility matrix?

  Thank you

  Good bye

  Request to check the compatibility of applications

  http://roaringapps.com/apps

  If the app does ' t start automatically, you must click on the button "go to the compatibility table.

• Re: Portege Z30: Fingerprint software does not, the connection with the sensor fails

  Hello to you all,.

  I have a great fun for you guys. If you're curious, it's here...

  I just bougt garage a portege Toshiba Portege Z30t-A-126 PT24CE-01400HFR
  Nice machine but SSD is too small, so I changed the original SSD 256 to a 512.

  Reinstalled Win7 completely without any pb.

  Just a pb in fact: the footprint software does not work.
  When I hliant, it fails and says "unable to connect with the sensor.

  In french "fingerprint recognition."
  Unable connect the sensor.

  But when I check the Device Manager computor it says that everything is in place and ongoing execution, validity (WBF) (PID = 0010) sensors works very well and the latest version of the driver is installed.
  (I downloaded the form driver toshiba Web site.) The name of the driver is fp - sw - 20140115084521.zip)

  Then? What's not?

  I spent hours searching the web and tried everything I could. Reinstalled a thousand times the drivers, software, tried other drivers... But there is no way that I can fix it.
  It's really annoying...

  Can someone help me please? Have you an idea? I'm stuck...

  Thanks in advance. :-)

  Hello

  This issue of the fingerprint has been described in another thread.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=81261

  You should be able to solve the problem installing the chipset driver.
  Another user said, an installation of Proset Ethernet drivers/software was necessary to get the problem resolved. But to be honest that I put t think that missing Proset utility would cause the question

  However, check it out.

  Your comments would be appreciated