Permissions question

Similar Questions

• R7000 drive NAS cannot delete the folders permissions question user-person not

  I have the R7000 with a Seagate STBV4000100 4 to USB 3.0 drive connected. I can connect to it very well, driving shares of work etc. Since a WIN 7 64 bit OS file system using windows Explorer I can create folders, etc.

  It comes occasionally when I try to delete some files or folders, I get the following message;

  "You must be authorized to perform this action."
  You need authorization of Unix User\nobody to make changes to this file"

  It would seem that I am not able to change the permissions of either windows Explorer.

  If anyone knows how I can change the permissions so I can delete from windows Explorer?

  One thing of note. When I copied the files/folders on the NAS of the windows system drive, some files have been marked read-only. Not sure if this is part of the question, but anyway. How do I set the permissions to something so I can remove them from windows?

  NOTE: If I disconnect the drive of the router and connect directly to the computer... it works fine. As the router and the PC are not on the same floor, is not practical and defeated the purpose. Suggestions welcome!

  After a few reformats the drive, it worked for me. The eSata disk files are exactly like Windows Explorer 'standard '. I can save, load, delete, change properties, etc... Because it worked, I had to turn off the router once, and after a reboot, nothing had changed. While working. (except the bad 5G wifi and "freaky" interface, but it was like before)...

• File Permissions question

  Is it possible to set permissions on a folder to allow a user (not the admin of computers) to write files and all other users to read or copy them to another drive?

  I have a problem where some users are dragging the files in the folder, then lose them!  I need to make the file read-only, but still allow a user to add files.

  Thank you

  Adam

  By default, users in the same group have read and access has allowed everyone to search other directories. If you want another user to have specific reading/writing/research access to a specific folder in your home directory, you must apply Access Control Lists that give this specific user of these privileges.

  In its simplest form, you use the Finder to select and get info on the target folder. At the bottom of the GET Info Panel is a section sharing and permissions. You need to unlock the Panel until you can apply the changes. You can add the specific user name that you want to grant read and write permissions on this specific issue and if for some reason, the staff and everyone else are not read-only, you can change it here too. If you want these permissions apply to the material in the attached file, then visit the gear at the bottom of the Control Panel icon. Click on the padlock closed when finished. Test.

• The presentation layer object permissions question

  Hi Experts,

  We had a product supplied by Oracle. The presentation layer objects have read access to the user authenticated. Now, we have created more than a few tables and imported into the presentation layer. So by default, objects are having no access. We would like to change the permissions of access forbidden to read. How can we do it for all the objects at the time? We are not able to see in the roles or users to identity the authenticated user. In the level column, we have this issue.

  Ask the experts to help understand me this about this user and where do I set the permissions correctly.

  Thanks to the Adv.

  Hello

  Change of access authorization shall read:

  Step 1: Resume of RPD

  Step 2: Copy the subject - (area some object you want to change the permissions)

  Step 3: Paste the topic for notebook

  Step 4: Replace the text 'no access 'to' read '.

  Step 5: In step 2 you had previously copied by any sector of activity, just remove the subject box in the presentation layer of RPD

  Step 6: Copy the text from Notepad and paste into the presentation layer of RPD

  Step 7: Save the PRD

• vCenter permissions Question

  I have a group of users in which I gave the Administrator role at all in vCenter except a specific data store. Users cannot see this datstore, but if I have a virtual machine added to the inventory of this store of data, these users can delete the virtual machine which also removes the data store VMDK.

  The only way to get around this, I found, is if I go up the NFS datastore as a NFS datastore read-only. Then, these users can delete the virtual machine, but this does not alter the VMDK from the data store. The problem is that now an administrator cannot create a virtual machine or the template on this data store because it is read-only.

  Is there another way to do this? I thought by not giving this group of users permissions on this data store, they might still be able to delete the virtual machine, but it would not remove the VMDK from the data store, but this isn't the case.

  Thank you for your help.

  -Joey

  You can undo just the 'spread' for this machine a virtual in the permission tab. It will copy the authorization of higher level for this virtual machine object, and now you can choose a different role for this group on this virtual machine. All other objects will remain with the permissions propagated.

  Concerning

• Why are all these answerse questions / answers for HOW DO I GET around WINDOWS 7's FILE PERMISSIONS? so old/otdated

  Why are all the questions & answers so old that in 2009-2011 & some in 2012 on the 1 to 12 pages on MICROSOFT WINDOWS from the COMMUNITY in respect of the question ' HOW DO I GET AROUND WINDOWS 7 FILE PERMISSIONS?  I'm sure people still encounter this same problem in 2013 because of course, I'm and worsened. Which means that we are all being denied access to the files that we have and have a right of access. I don't think this can be more clearly stated.  Thanks if you can answer this question. It is dated April 2, 2013

  You do not have any problems, or at least in detail where all permissions question arises, when you do what with what

• issues of regulation and printer

  Hello

  I'm having a few problems which I hope are fixable

  first isadding a bluetooth printer - I have asked in the past two weeks, how to install an and got answers, but when I go into the Panel there is no link to click for bluetooth devices and I know there was in the past-is that I can download or reinstall somehow? can't use system restore because it never worked for me when I do a restore it gives an error message

  I also want to take control of my computer as /owner administatrator or what it takes to make me able to activate or remove anything installed on my computer, I tried to do it through properties and some files / programs partially let me take over but others refuse me and give a message to the administrator to see or flatout saying permission denied and I want to change this

  Thanks in advance for any help

  With bluetooth, you can get in trouble with your device drivers, firmware and/or software.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you shouldget at least for the bluetooth device to the computer and the printer bluetooth (even though the devices appear to work OK) and all you have time to do - they help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  Once the device is properly installed (and any firmware or software as well as appropriate) appropriate for the device and your version of Vista, then it should automatically install the Bluetooth icon in the Device Manager (if is included in how it works - or he can place it elsewhere, depending on how it is programmed).  In any case, the camera and the printer (if set up properly) should work.

  In this regard to permissions question is, Vista is a lot different than XP.  A LOT of folders and files are denied access even to administrators.  While this can sometimes be fixed individually with permissions or ownership, it cannot be changed on the whole.  There is no way to increase your administrator permissions to offer you the same level of access that you have had with XP.  It's just the way it was designed.

  The following information about the ownership and permissions can help you in individual situations where you need access and are blocked:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I solve problem with registration PIC after changing it? that is the necessary files and permissions of directory question

  I take a picture on my cell phone and then send it from the phone to my PC via bluetooth. It creates a JPG file which can be opened with a double-tap using Paint Shop Pro 6. Then I crop and click on the "Save" button. Problem is... it appears this darn saying Paint Shop Pro box always could not overwrite the specified file. Please make sure you have the necessary file and directory permissions. OK

  It's my home PC and I'm the only user so obviously, I'm the admin. Is could someone please tell me what I can do to stop this and give me the details?

  More information: if I click on file > save as, I can record with the same name somewhere or save it under a new name, where I want to.

  Even if you are the administrator, that it does not necessarily mean that you have the full access rights on the file or folder in question, but as an administrator, you have rule on the computer and as such, you can enter the owner of the file or the folder and grant you full control over the object.

  How to capture a file or a folder in Windows XP

  John

• Question - why when I try to install additional licenses of CS3.0 Design Premium, dies my permit it's maxxed out?

  Why when I try to install additional licenses of CS3.0 Design Premium, die my permit it's maxxed out?

  Well, since the licenses were not disabled before reimage, he poses questions.

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

• Question about permissions on vCo 4.2.1

  Hello

  I'm having a problem where the user can see more information and vCo should be possible on his account.

  I have a user named "Test" with a vm folder named 'Test' read-only permissions and execute permissions on the workflow 'Research vm'.

  When I run this workflow I would expect to find only vm in this folder.

  The workflow includes following the code to search for the virtual machine:

  XPath = "xpath:name [begin with(.,'"+ pattern +"')]; var

  machines virtual var = new Array();

  VM = VcPlugin.getAllVirtualMachines (null, xpath);

  This workflow returns however each vm you are looking for on the vCenter server when run with the test account, as he is an admin account.

  For example it returns the virtual computer object with vm-1177 as id and can see all the information and even to launch new tasks.

  When I navigate to https://vCenter/mob/?moid=vm-1177 with the test account all fields are disabled.
  

  My guess is that the only controls vCo if the user has the Execute permission but running the workflow with the admin account.

  Or I do something wrong? And it is even possible to check if an account is authorized to obtain certain information?

  I found this article in the Ko, but he has not answered my question: VMware KB: introduction to security Orchestrator

  Thanks in advance

  Thibaut Noben

  The results received by this workflow will depend on how you have configured vCenter plug-in... If a session shared, then the results of the workflow (regardless of who is connected to vCO) will be based on the credentials used for the session shared to vCenter... If each user is configured, then results are supposed to based on the credentials of the logged-on user because those are those sent to vCenter.

• Questioning the roles and permissions at the University Complutense of MADRID 11g

  Hello
  
  I have a query like the following:
  
  The user administrator can assign multiple roles to a user. If a user has multiple roles, the authorization becomes ___and _.
  Is this,
  
  A dependency
  Less restrictive
  More restrictive
  Subtractive
  
  Help, please.

  Looks like a certification test question :-)

  I think that the correct answers are Addictive and least restrictive
  (the user will receive the permissions based on the roles that he or she is assigned to the)

• Quick question on granting permissions to a role

  Is it possible to use the GRANT statement to give privileges to a role?
  
  For example: GRANT SELECT on all VIEWS FOR < rolename >
  
  Or, what I need to change the role?
  
  I tried searching forums and do some research on Google with no luck. Any help would be appreciated. (Even a link to a page that tells me how to do this).
  
  Thank you!

  Hello

  Unfortunately, there is no way to grant privileges to all points of view at a time; You must issue a separate GRANT statement for each of them.
  It would be really handy.
  And there is no way to control the privileges on views that havenn can't yet created.

  user11033437 wrote:
  ...
  I know that I can use a form of:

  SELECT     'GRANT SELECT ON ' || view_name || ' TO mydb_select_user'
  FROM     user_views
  WHERE     owner = 'schema owner'
  

  to generate all the GRANT statements for all views in the schema, but then I suppose that if a new view is created, I have to execute a GRANT statement for each new view to the role as well.

  I expect only one GRANT statement that would do what I want.

  Of after what I've been see by trying this research question, I guess there is no way to grant permissions to select among all views that would automatically include all new views created, but if there is, that's what I want to do.

  The dynamic instruction you posted is the best you can do.

  I've written a PL/SQL procedure to do this just for a specific schema. He traveled every night, dbms_scheduler and members of the role have privileges to perform the procedure whenever they wanted, if, in the middle of the day, they suspected there was a view that they could not see.

• Question about the migration of mass of files and permissions

  Hello

  I'm moving 2TBs of files from one external hard drive to another, but every time that I try to do a file mass transfer from one day to the next it eventually fail due to permissions for some files. I looked at the files on that he objected and I read and write permissions on them, as you would expect.

  What can I do to fix this?

  Try to run repair permissions and ACLs on your record. A repair permissions with disk utility does not have anything in your folder. Boot from your recovery partition now command-keys R in the menu utilities launch Terminal. In the Terminal, type: resetpassword , then press return.  (Note: you won't be reset password)

  Click the icon for the hard drive of your Mac at the top. In the drop down menu below, select your home folder. At the bottom of the window restore Home Directory Permissions and ACLs. Then, click on the Reset button. When the prompt returns to the command line, you can leave out Terminal.

• Two questions on MapField (GPS permissions) and the map display

  Hello world

  I have two questions about the use of the Mapfield (for OS 5.0):

  First of all, it is possible to invoke the Permission of GPS is fast at the start of the application rather than the first time, you open the card and use the GPS?

  Second, I use a MapField in my application, and the map that appears on the device is only to show a green background with diagonal black lines and circles white - as if there were no card information to show. I tried to load many different places, and I get the same result. On the Simulator, I get the most actual plan information.  Does anyone know why this might be happening?

  Thank you!

  regarding your first question:

  use an applicationpermissionsrequest for that object.

• Creative student permit Cloud - legal question

  Hello. Before signing up for the annual creative cloud student, I have a philosophical question / legal. I share my home iMac and Macbook pro with other people. They will be banned or allowed to launch adobe applications? Old purchased version sort of belonged to the user and the computer at the same time, but... What is now with the subscription service? I must somehow prohibit others to launch Adobe apps? And as before, then I have my apps on my iMac and Macbook pro adobe? Since user Agreement is too long and sometimes complex, I'm not sure of this...

  Can someone help me with this issue?

  Thank you

  Rafael, given that the license will be placed on your Adobe ID, it is recommended that only access you the applications on your computer at home.